]>
git.gag.com Git - fw/altos/log
Keith Packard [Thu, 25 Aug 2011 06:21:02 +0000 (23:21 -0700)]
doc: Remove duplicate documentation about max flight log
This was described in detail in both the System Operation and AltosUI
chapters. Remove the duplicate from the AltosUI chapter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 25 Aug 2011 06:06:44 +0000 (23:06 -0700)]
Merge remote-tracking branch 'origin/master'
Keith Packard [Thu, 25 Aug 2011 06:06:01 +0000 (23:06 -0700)]
doc: Describe max flight log, ignite mode and pad orientation
These describe what these configuration parmaeters do, not how to set them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 05:51:38 +0000 (23:51 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Conflicts:
doc/altusmetrum.xsl
Bdale Garbee [Thu, 25 Aug 2011 05:50:31 +0000 (23:50 -0600)]
tweak tweak tweak
Keith Packard [Thu, 25 Aug 2011 05:29:56 +0000 (22:29 -0700)]
doc: Move the remaining command-mode descriptions to the appendix
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 05:23:56 +0000 (23:23 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 25 Aug 2011 05:23:45 +0000 (23:23 -0600)]
more changes
Keith Packard [Thu, 25 Aug 2011 05:20:29 +0000 (22:20 -0700)]
doc: Updating Firmware is now a separate chapter
The Flash Image paragraph references it, change the reference wording.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 25 Aug 2011 05:18:29 +0000 (22:18 -0700)]
doc: Move updating device firmware section to separate chapter
This isn't central to operation of the devices, so move it out to a
separate chapter
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 05:15:20 +0000 (23:15 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 25 Aug 2011 05:15:15 +0000 (23:15 -0600)]
more tweaking
Keith Packard [Thu, 25 Aug 2011 05:12:39 +0000 (22:12 -0700)]
doc: use 'radio link' to refer to packet command mode
Make sure 'radio link' doesn't refer to telemetry and eliminate use of
'RF link' and other similar but not identical phrases.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 05:03:23 +0000 (23:03 -0600)]
more tweaks
Bdale Garbee [Thu, 25 Aug 2011 04:42:39 +0000 (22:42 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 25 Aug 2011 04:42:33 +0000 (22:42 -0600)]
more doc tweaks
Keith Packard [Thu, 25 Aug 2011 04:39:48 +0000 (21:39 -0700)]
doc: Move Packet Command Mode section to System Operations chapter
It makes far more sense here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 25 Aug 2011 04:31:05 +0000 (21:31 -0700)]
doc: Describe packet command mode a bit better.
Include comments about TeleMini in the introduction, and then explain
a bit better what the best method of reliably initiating packet
command mode are (start operation, then boot telemini).
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 04:27:35 +0000 (22:27 -0600)]
more doc tweaking
Keith Packard [Thu, 25 Aug 2011 03:59:28 +0000 (20:59 -0700)]
doc: Document pad-mode 'on-board data logging' indicator
There wasn't any documentation for this field in the 'Launch Pad' tab.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 25 Aug 2011 03:42:09 +0000 (20:42 -0700)]
doc: Spelling corrections in altusmetrum.xsl
Lots of minor spelling errors.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 25 Aug 2011 03:39:21 +0000 (21:39 -0600)]
doc tweaks through chap 3
Bdale Garbee [Thu, 25 Aug 2011 03:26:26 +0000 (21:26 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Thu, 25 Aug 2011 03:22:29 +0000 (20:22 -0700)]
altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
No reason to download stale java bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 25 Aug 2011 02:13:03 +0000 (19:13 -0700)]
altosui: Make flight monitor font size configurable
Tiny netbooks aren't tall enough for the 'usual' font size, so provide
a smaller option. Then provide a bigger option, just because.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Aug 2011 08:48:28 +0000 (01:48 -0700)]
altosui: Don't trust companion telemetry record 'channels' count
It can be bogus, allowing the code to walk off the end of the
allocated data array.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 24 Aug 2011 07:53:02 +0000 (01:53 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 24 Aug 2011 07:51:54 +0000 (01:51 -0600)]
prepare for another rebuild
Bdale Garbee [Wed, 24 Aug 2011 07:50:56 +0000 (01:50 -0600)]
add pkg-config to the build deps
Bdale Garbee [Wed, 24 Aug 2011 07:45:28 +0000 (01:45 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 24 Aug 2011 07:43:59 +0000 (01:43 -0600)]
roll changelog back in prep for another test build
Bdale Garbee [Wed, 24 Aug 2011 07:41:53 +0000 (01:41 -0600)]
another test round
Bdale Garbee [Wed, 24 Aug 2011 07:38:58 +0000 (01:38 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Wed, 24 Aug 2011 07:29:36 +0000 (00:29 -0700)]
altosui: Try to get dialogs to look a little better
grid bag constraints are not my friend.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Aug 2011 07:09:51 +0000 (00:09 -0700)]
altosui: Add tool-tips to config dialogs
Provides more information about the various settings, and, when
they're disabled, tells the user why.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Aug 2011 06:20:00 +0000 (23:20 -0700)]
Remove stale tools (ao-dumplog, ao-postflight, ao-view)
These tools have all been supplanted by altosui at this point, and
keeping them around increases the build dependencies by quite a lot.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 24 Aug 2011 05:51:57 +0000 (22:51 -0700)]
altosui: Use system look&feel
Turn on the 'be less ugly bit'
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 24 Aug 2011 03:37:17 +0000 (21:37 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 24 Aug 2011 03:33:53 +0000 (21:33 -0600)]
rewind changelog to 0.9.6.0 for rebuild
Bdale Garbee [Wed, 24 Aug 2011 02:11:01 +0000 (20:11 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 24 Aug 2011 02:10:14 +0000 (20:10 -0600)]
turn off auto-tagging during Debian build
Keith Packard [Wed, 24 Aug 2011 01:56:07 +0000 (18:56 -0700)]
altosui: add tool-tips to the button box.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 20:29:23 +0000 (13:29 -0700)]
libaltos: fix Mac OS X function signatures
altos_list_start was declared to take a (int time) parameter for some reason.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:35:28 +0000 (23:35 -0700)]
altosui: Update mac os X library
This has been tested on 32-bit OS X and it works; dunno about
64-bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:34:55 +0000 (23:34 -0700)]
altosui: Reset all config data on 'reset' command
This lets you switch altimeters without getting any stale data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:33:52 +0000 (23:33 -0700)]
altosui: Only 'show' config dialog once
Otherwise, the dialog jumps back to the initial position each time the
data is updated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:32:36 +0000 (23:32 -0700)]
altosui: fix 'magic' string to signal end of config data
Was using "done", which happens to be displayed by the 'l'
command. Switch to 'all finished' which doesn't appear in the config
data output. Yes, this method is a kludge.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:31:54 +0000 (23:31 -0700)]
altosui: Can't configure flight log max on TeleMini
It's only got space for one flight.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 06:12:30 +0000 (23:12 -0700)]
altosui: Make monitor-idle display correct 'On-board data logging' status
Count number of stored flights and see if there's space for another
one.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 01:25:34 +0000 (18:25 -0700)]
altosui: Add --summary option to dump flight stats to stdout
useful for quickly capturing sense of a flight.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 01:24:54 +0000 (18:24 -0700)]
altosui: Show filename in AltosGraph window
Makes it easier to tell multiple windows apart
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 01:23:41 +0000 (18:23 -0700)]
altosui: Add date/time/serial/flight to flight stats tab
And switch to using the AltosConvert units conversions functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 01:22:21 +0000 (18:22 -0700)]
altosui: Capture date/time/serial/flight in AltosFlightStats
Time is the time when boost was detected.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 01:21:35 +0000 (18:21 -0700)]
altosui: Add a few simple unit conversions
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 00:18:02 +0000 (17:18 -0700)]
doc: Add Installation Recommendations chapter
Document installation suggestions, including mounting, RFI, antenna
issues and ground testing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 23 Aug 2011 00:17:43 +0000 (17:17 -0700)]
doc: Add note about telemetry disable mode to 1.0 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 22 Aug 2011 05:52:45 +0000 (22:52 -0700)]
altosui: Attempt to make both 32- and 64-bit windows DLLs
We'll see if they work...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 22 Aug 2011 05:12:53 +0000 (22:12 -0700)]
altosui/windows: Fix a bunch of windows compiler warnings.
Some of these may have actually been serious -- a write length was
getting stored in a signed char...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 22 Aug 2011 05:12:04 +0000 (22:12 -0700)]
altos-fat/windows: Check and install Java 1.6 as needed
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 22 Aug 2011 22:08:55 +0000 (16:08 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Mon, 22 Aug 2011 02:18:54 +0000 (19:18 -0700)]
altosui: Clean up command line processing. Add --graph
Make the command line processing a bit less ad-hoc, track 'mode' of
processing and deal with all files on the command line.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 19 Aug 2011 01:02:02 +0000 (18:02 -0700)]
altos/altosui: Add ability to disable telemetry/rdf completely
This turns off the telemetry system so that it never transmits telemetry
or RDF tones. In idle mode, it will still accept packet mode connections.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 20 Aug 2011 18:35:55 +0000 (11:35 -0700)]
Bump version to 0.9.7
Bdale is flying 0.9.6 at chili blaster, make sure later firmware gets
a later version number.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 20 Aug 2011 18:28:53 +0000 (11:28 -0700)]
altos: Merge common config code in ao_config.c
This shuffles code around in ao_config.c to share some common code
segments for starting and committing config changes.
This also stops printing out changes as they are made which aren't
needed by the UI code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 20 Aug 2011 18:19:57 +0000 (11:19 -0700)]
altosui: Disable 'max flight log' config when there are stored flights
When flights are stored in flash, the maximum flight log value cannot
be changed as the flight data might need to be moved around in
memory. Check for this case by looking for stored flights and
disabling the combo box when storage is not empty.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 20 Aug 2011 17:43:28 +0000 (10:43 -0700)]
altosui: remove debug printf in pad pane
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 20 Aug 2011 15:28:04 +0000 (09:28 -0600)]
update changelogs for Debian build
Bdale Garbee [Sat, 20 Aug 2011 15:24:29 +0000 (09:24 -0600)]
update changelogs for Debian build
Bdale Garbee [Sat, 20 Aug 2011 04:47:50 +0000 (22:47 -0600)]
update changelogs for Debian build
Keith Packard [Mon, 15 Aug 2011 04:11:41 +0000 (21:11 -0700)]
altosui: Add 'On-board Data Logging' indicator to pad tab
This shows whether the on-board data memory is full, or is ready to
record the flight. This is indicated in the telemetry stream by a
flight number of '0'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 15 Aug 2011 04:09:42 +0000 (21:09 -0700)]
altosui: Ancient log files used 'apogee' for 'coast' state
2009-07-18-serial-004-flight-000 says 'apogee' for the apogee-detect
phase of the flight; map this to coast so that this flight replays
correctly (although the log terminates at apogee...)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 15 Aug 2011 02:19:50 +0000 (19:19 -0700)]
altos: Lost change that reported flight 0 when log memory was full
commit
52ac83fedbfd380d14d4df2e79992bbdfba3552a added coded to check
for a full flight log and complain with a special tone.
It also reported flight 0 over telemetry, and that part of the patch
got lost when moving to the new telemetry format. This patch
resurrects that piece.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 07:00:54 +0000 (00:00 -0700)]
altosui: Respect storage limits in flight log max config
Compute the maximum flight log using the data returned from the 'f'
command (total storage and erase block size). Limit menu to choices
which fall within this limit, complain if the user asks for too big a value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 07:00:07 +0000 (00:00 -0700)]
altosui: don't set channel when using radio setting
altos now sets the radio back to channel 0 when the radio setting is
changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 06:58:03 +0000 (23:58 -0700)]
altos: use raw height while waiting for landing
This avoids any noise introduced by the kalman filter, making landing
detection much more reliable. This patch also changes the interval to
10s so that the height bounds can be increased to 4m.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 06:56:55 +0000 (23:56 -0700)]
altos: Reset radio channel to zero when using radio setting
Otherwise, it's hard to set the frequency over the radio link.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 06:56:06 +0000 (23:56 -0700)]
altos: Correct AO_CONFIG_MINOR from 6 to 7
Forgot to bump this when adding radio setting.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 04:10:15 +0000 (21:10 -0700)]
altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
The eeprom download code wants to interrupt serial communication so
that it can stop downloading stuff in the middle of a run. Make
flush_input pass the exception along instead of discarding it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 04:09:19 +0000 (21:09 -0700)]
altosui: Eliminate inter-chunk flush_input calls
Once the serial line is nicely synchronized, we don't need to flush
input between chunks. This speeds up eeprom downloading quite a bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 04:05:46 +0000 (21:05 -0700)]
altosui: Devices with log-format can also delete flights
Any device with either flight-log-max or log-format can delete flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:39:35 +0000 (18:39 -0700)]
altosui: Add support for TeleScience eeprom download
Using the existing eeprom methods, fetch and save TeleScience eeprom
data, storing to a filename generated from the serial/flight from the
TM connected to the TS board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:36:18 +0000 (18:36 -0700)]
altosui: Clean up eeprom parsing a bit
Export basic parsing and checksum functions for shared use.
Create 'erased' function to check a chunk of eeprom data for data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:31:08 +0000 (18:31 -0700)]
altos: wait 10s for companion to boot
In case the companion is delayed while booting, retry the setup 10
times with a 1s delay between tries.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:30:00 +0000 (18:30 -0700)]
altos: Send serial/flight to companion board
Lets the companion log them for later matching with TeleMetrum log
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Aug 2011 04:41:25 +0000 (21:41 -0700)]
altos: Send SPI message at flight state changes
Get the companion board starting its data logging as soon as possible
after boost starts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 21:58:34 +0000 (14:58 -0700)]
altosui: Add companion support to the flight UI and CSV conversion
Shows the companion data in a new tab. Also put companion data into
CSV file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 13:29:13 +0000 (06:29 -0700)]
altos: Check for companion init packet validity was busted
Was using board_id == ~board_id instead of board_id ==
~board_id_inverse.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 12:42:05 +0000 (05:42 -0700)]
altos: add the 'L' command to show the status of a linked companion board
This prints out whether there is a board connected, along with the
various values fetched from it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 12:41:15 +0000 (05:41 -0700)]
altos: Make sure companion task exits cleanly when done
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 12:38:16 +0000 (05:38 -0700)]
altos: Put SPI in slower mode when talking to companion board
The AVR CPU on the other side just can't go very fast. This reduces
the SPI clock by a factor of 16, just under 200kHz. As the companion
commands are reasonably short, this shouldn't have a huge effect on
overall SPI utilization.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 9 Jul 2011 23:59:16 +0000 (16:59 -0700)]
altos: Add SPI-based companion board support
This sends current flight state information and retrieves companion
data to include in telemetry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:38:38 +0000 (18:38 -0700)]
altos: Don't try to use non-basestations for remote eeprom download
Companion boards may also have eeprom data to fetch; don't try to use
them as a radio.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Aug 2011 04:43:56 +0000 (21:43 -0700)]
altos/altosui: Report log format in the version command
This will make it easier to figure out what the contents of the flash
should look like from altosui; the current 'guessing' mechanism will
not scale to many more formats.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:28:38 +0000 (18:28 -0700)]
altos: re-write a bit of GPS parsing code to reduce size
Use a local variable while computing hdop.
Place the next incoming character in data instead of pdata.
Saved a surprising amount of memory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Aug 2011 12:26:09 +0000 (05:26 -0700)]
altos: shrink text space from ao_config.c
Eliminate redundant config initializers by setting minor to zero and
letting upgrade code handle all of the new values.
Stop computing (fake) frequency when showing radio channel
Stop computing feet when showing main deploy height
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Aug 2011 01:33:07 +0000 (18:33 -0700)]
libaltos: Mis-allocated device list in libaltos
Would overrun mis-allocated array, causing chaos.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Aug 2011 22:00:14 +0000 (15:00 -0700)]
ao-tools: ao-list was crashing with more than 3 devices connected
the list of devices was getting realloced for each new device, but
that realloc was too small.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Aug 2011 23:11:34 +0000 (16:11 -0700)]
altos: remove monitor disable stubs from altimeter code
Monitor mode in the ground-station boards must be disabled when the
radio is going to be used for another purpose, or the radio parameters
changed. That places monitor-mode disable calls in other parts of the
system which are shared with the altimeter code.
Elide the ao_set_monitor calls for builds which do not include any
monitoring code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Aug 2011 22:59:47 +0000 (15:59 -0700)]
altos: Apply igniter boot pulse-width reduction to telemini
TeleMini needs the same fix as TeleMetrum to reduce startup igniter
pulses.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Aug 2011 22:57:58 +0000 (15:57 -0700)]
altos: Pull igniter pins low as soon as possible at boot time
This reduces the pulse width on the igniter circuit caused by the
default cc1111 pin configuration at powerup time.
Signed-off-by: Keith Packard <keithp@keithp.com>