]>
git.gag.com Git - fw/altos/log
Keith Packard [Sat, 2 Jun 2012 02:51:25 +0000 (19:51 -0700)]
altosui: Quick hacks to download megametrum data and convert to CSV
Very little useful data crunching is done, but at least we can save
and convert files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jun 2012 02:35:33 +0000 (19:35 -0700)]
altos: Timers clock base depends on perhipheral bus prescalers too
For some weird reason, a non-unity perhipheral bus clock scaler
affects the base of the various timers; this left the 100Hz tick
running at 200Hz.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jun 2012 02:35:01 +0000 (19:35 -0700)]
altos: megametrum has logging
This makes sure the various other subsystems know about it, like the
'v' command.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jun 2012 02:34:17 +0000 (19:34 -0700)]
altos: add high-z accel and mag sensor to megametrum logging
These nicely fill the 32-byte sensor log record
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jun 2012 02:33:18 +0000 (19:33 -0700)]
altos: Mark full and mega logging correctly in 'v' command
Make sure megametrum reports 'log format 5'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:48:04 +0000 (11:48 -0600)]
Bump to 1.0.9.5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:47:28 +0000 (11:47 -0600)]
altos: Clear stm i2c transfer timeout alarm
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:46:51 +0000 (11:46 -0600)]
altos: Remove debug printf from accel auto-cal
Otherwise, this goes way too slow
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:45:53 +0000 (11:45 -0600)]
altos: Clean up ADC selection for cc1111
Depend directly on product defines instead of trying to guess
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:45:30 +0000 (11:45 -0600)]
altos: All cc1111 products have a radio
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:44:45 +0000 (11:44 -0600)]
altos: Shrink telemetry generation code
otherwise TM doesn't build anymore
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 17:44:07 +0000 (11:44 -0600)]
altos: Try to get hmc5883 working
No joy yet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 May 2012 00:23:39 +0000 (18:23 -0600)]
altos: Make teleterra v0.2 compile with new ao_data struct
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:45:09 +0000 (17:45 -0600)]
altos: Make telepyro-v0.1 build with new ao_data struct
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:44:01 +0000 (17:44 -0600)]
altos: Make telescience-v0.1 build with new ao_data struct
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:31:12 +0000 (17:31 -0600)]
altos: Make telenano build with new ao_data structure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:29:27 +0000 (17:29 -0600)]
altos: Make stm-demo compile with new ao_data structure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:26:43 +0000 (17:26 -0600)]
altos: Make telemini-v1.0 compile with new ao_data structure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:25:17 +0000 (17:25 -0600)]
altos: Make telemetrum-v1.0 build with new ao_data structure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 23:24:09 +0000 (17:24 -0600)]
altos: Make telemetrum-v1.1 compile with new ao_data structure
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 22:52:45 +0000 (16:52 -0600)]
ignore pa to altitude conversion file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 22:47:30 +0000 (16:47 -0600)]
altos: Split out mm-specific versions of sampling code
Avoid breaking telemetrum (too much) by splitting this stuff apart.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 22:46:00 +0000 (16:46 -0600)]
altos: Don't start ADC ring until the other sensors have a valid value
Yes, this is still an ugly kludge, but it's easy.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 27 May 2012 22:44:38 +0000 (16:44 -0600)]
altos: Data packet tick count does not live in adc structure
It was moved to the global structure. Having two is confusing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 26 May 2012 05:18:06 +0000 (23:18 -0600)]
Get megametrum ready to at least log flight data
Doesn't track flight state changes correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 19 May 2012 04:23:47 +0000 (21:23 -0700)]
altos: Poll mpu6000 values every tick and stash them locally.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 19 May 2012 03:16:35 +0000 (20:16 -0700)]
altos: Finish ms5607 support
This has the MS5607 polling once each tick for pressure and
temperature and then saving that in a global variable. The command UI
provides for dumping the prom data so that an eeprom file can have
raw sensor data along with the conversion factors necessary to compute
useful values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 19 May 2012 03:04:57 +0000 (20:04 -0700)]
altos: Add conversion between Pa and meters
To be used with the MS5607 which generates data in calibrated units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 06:14:57 +0000 (23:14 -0700)]
altos: Check MS5607 CRC. Clean up MS5607 API
It's not ready for flight yet, but at least it's sensible now.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 06:14:14 +0000 (23:14 -0700)]
altos: Conditional byte swapping in mpu6000 driver
Only needed on LSB machines.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 16 May 2012 15:13:53 +0000 (09:13 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Wed, 16 May 2012 15:09:44 +0000 (09:09 -0600)]
build-dep on default-jdk instead of openjdk-6-jdk, closes: #655580
Keith Packard [Tue, 8 May 2012 04:53:53 +0000 (21:53 -0700)]
altosui: Try to make telem tick counts match eeprom
telem files can have an extra wrap or two of tick count if they start
recording a long time before the flight. Account for this so that the
CSV file output from each have matching tick values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:53:11 +0000 (21:53 -0700)]
altosui: Output recorded clock tick in CSV files
This allows eeprom and telem files to be correlated accurately
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:52:12 +0000 (21:52 -0700)]
altos: Hacking at cc1120 driver
Still doesn't work, but this adds a ton more register definitions
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:51:25 +0000 (21:51 -0700)]
altos: Get mpu6000 working
This initializes the device appropraitely, and provides a command to
dump the current values in converted form.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:50:26 +0000 (21:50 -0700)]
altos: stm: pass DMA buffer index to DMA completion callback
This lets the user know which DMA has finished.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:49:24 +0000 (21:49 -0700)]
altos: stm: delay during USB config with pull-up off
This makes sure that a reboot will reliably cause the device to
disconnect from the USB bus.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 8 May 2012 04:47:17 +0000 (21:47 -0700)]
altos: stm: share i2c_stop code between send and recv
This waits for the stop signal to appear on the bus, necessary before
starting another transaction.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 May 2012 06:54:13 +0000 (23:54 -0700)]
altos: stm i2c DMA for large recv appears to work
Transaction appears to be clean on the i2c bus now; correct number of
bytes received, and the nack and stop at the right time. This tests >
2 length reads; should try that too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 May 2012 05:53:25 +0000 (22:53 -0700)]
altos: megametrum needs ao_mpu6000.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 May 2012 05:52:56 +0000 (22:52 -0700)]
altos: Switch megametrum compile to -Os
Looks like gcc has compiler bugs with -O0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 7 May 2012 05:47:33 +0000 (22:47 -0700)]
altos: STM i2c work.
Start now driven by interrupts
Send now done with DMA and interrupts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 May 2012 01:12:41 +0000 (18:12 -0700)]
ao-tools: Add GPS and rssi printing to ao-telem
This prints all of the basic telemetrum messages now.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 May 2012 18:08:49 +0000 (11:08 -0700)]
altos: Report latest telemetry data, rather than using the oldest
ao_sample_adc points to the *next* ADC entry, rather than the most
recent one. Step back one entry to get the latest valid data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Apr 2012 06:29:20 +0000 (23:29 -0700)]
altos: Add hmc5883 and mpu6000 drivers to megametrum build
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Apr 2012 06:27:58 +0000 (23:27 -0700)]
altos: Add mpu6000 and hmc5883 stubs
No real drivers here yet, just some testing stubs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Apr 2012 06:26:57 +0000 (23:26 -0700)]
altos: Add STM I2C recv and stop funcs
Recv doesn't appear to work with more than one byte
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Apr 2012 06:25:43 +0000 (23:25 -0700)]
altos: Oopsed the STM DMA channels for I2C1
TX is 6, RX is 7
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 21 Apr 2012 03:26:16 +0000 (22:26 -0500)]
altosui: Mac OS Lion Java default heap space is too small (Trac #37)
Increase it to 512M in the Info.plist file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 Apr 2012 18:01:18 +0000 (11:01 -0700)]
altos: Starting to write cc1120 driver
This does "something" in radio test mode, appearing to generate a
730MHz signal.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 20:53:36 +0000 (13:53 -0700)]
altosui: Add apogee lockout configuration
Provide suggested values of 5/10/15/20 seconds.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 20:52:37 +0000 (13:52 -0700)]
altosui: Read frequency from device while configuring ground station
Missed this when adding the TD config UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 19:05:28 +0000 (12:05 -0700)]
altos: Remove debug printf from cc1111 check-stack script
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 19:02:14 +0000 (12:02 -0700)]
altos: Respect apogee lockout time in flight algorithm
This prevents any apogee detection from occurring until the specified
number of seconds after boost. This also prevents the switch from
accel+baro to baro only mode in the Kalman filter.
The test frame work is also changed to look for Apogee lockout: in the
eeprom input file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 19:00:32 +0000 (12:00 -0700)]
altos: Clean up test scripts
The flight test scripts were using invalid bash syntax. Clean that up
and also switch the default flight directory to my new
~/misc/rockets/flights directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 01:38:29 +0000 (18:38 -0700)]
altos: Correct STM USB driver
Configure endpoint registers correctly now.
Restructure code to make sure we send the right IN packets.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 01:35:46 +0000 (18:35 -0700)]
altos: Check all USE_SERIAL_*_STDIO when computing AO_NUM_STDIOS
AO_NUM_STDIOS is allocated based on the total number of possible stdio
values. Now that multiple serial stdio are possible, make sure to
check all of them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Apr 2012 01:34:52 +0000 (18:34 -0700)]
altos: Set USB Interrupt endpoint interval to maximum allowed
We don't ever send anything over this channel, so there's no sense
asking the host to poll it very often.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 Apr 2012 16:39:20 +0000 (09:39 -0700)]
altos: Pull more interfaces out of ao.h and move to separate files
This moves the aes, btm, companion, lcd and packet interfaces out of ao.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 Apr 2012 16:36:00 +0000 (09:36 -0700)]
altos: ao_telelaunch.c got left in src directory
Should live in product/ao_telelaunch.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 21:51:07 +0000 (14:51 -0700)]
altos: Massive product config cleanup
Support multiple serial ports more cleanly
Split out parts of ao.h into separate feature header files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 21:50:12 +0000 (14:50 -0700)]
altos: Start adding apogee lockout support
Remove radio channel support too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:31:28 +0000 (23:31 -0700)]
altos: Switch stm-demo to HSE clock, add USB
Requires that SB17 be soldered shut so that the MCO from the STlink
CPU is available the target for HSE input.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:30:13 +0000 (23:30 -0700)]
altos: Rework how STM clocks are initialized.
Clean all of the RCC configuration up after turning on the clocks.
Use the MSI clock during initialization to avoid messing around with
the HSI clock temporarily.
Allow for an external clock on the HSE line.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:29:38 +0000 (23:29 -0700)]
altos: Use new USB driver in megametrum-v0.1 product
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:28:45 +0000 (23:28 -0700)]
altos: Add STM USB driver
Emulates the usual CDC-ACM device
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:26:30 +0000 (23:26 -0700)]
altos: Add STM ao_arch_reboot implementation
Uses the AIRCR register to force a reset
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 Apr 2012 06:25:36 +0000 (23:25 -0700)]
altos: Add register definitions for STM syscfg and usb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 06:27:43 +0000 (23:27 -0700)]
altos: Add support for multiple SPI busses and sharing device drivers
The STM32L151 has several SPI busses, and we want to use more than
one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting
time on AVR and CC1111 processors which only use one SPI bus, elide
those parameters from the actual functions by wrapping them with
macros.
Configuring chip select is now all macroized so that each chip can
have its own version, allowing the STM to share the various SPI device
drivers with the cc1111 and avr processors. Note that only the M25
driver has been ported; porting the others is 'trivial', but not
necessary at this point.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:25:59 +0000 (22:25 -0700)]
altos: make megametrum beeper test keep beeping
Used to measure the beep frequency.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:25:13 +0000 (22:25 -0700)]
altos: Check for cc1111 flash overflow
The linker is supposed to do this, but it ignores the static
initializer data added after the code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:24:36 +0000 (22:24 -0700)]
altos: Increase STM SPI speed to PCLK/4
The pressure sensor seems happy at this speed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:23:52 +0000 (22:23 -0700)]
altos: Move MS5607 configuration to ao_pins.h
Which SPI port and where chip select is to be found are product specific.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:22:58 +0000 (22:22 -0700)]
altos: Add missing parens in ao_ms5607.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:21:46 +0000 (22:21 -0700)]
altos: Reduce MS5607 reset delay, increase conversion delay
Reset doesn't take very long, while doing a conversion seems to take
more than 10ms.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 05:17:33 +0000 (22:17 -0700)]
altos: Make STM clock configuration per-product. Fix 32MHz CPU speed
This moves all of the STM clock configuration into ao_pins.h so that
each product can configure it separately. While doing this, I
discovered that the flash memory mode (64-bit, prefetch, latency 1)
wasn't actually getting set, which is why the CPU refused to work at
32MHz.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Apr 2012 03:28:19 +0000 (20:28 -0700)]
altos: Add beeper driver to STM arch
Drives the MegaMetrum beeper
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:10:43 +0000 (00:10 -0700)]
altos: Test I2C code on discovery board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:10:01 +0000 (00:10 -0700)]
altos: ARM -O0 flag appears to generate buggy code
Use -Os always, which is annoying...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:09:18 +0000 (00:09 -0700)]
altos: Make ms5607 driver do something
It's loading prom values and converting sensor data, but it's getting
the wrong answer at present.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:08:20 +0000 (00:08 -0700)]
altos: add STM I2C driver.
Not well tested yet...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:06:35 +0000 (00:06 -0700)]
altos: Slow STM SPI down a bit so the MS5607 returns values
It's still not working right, but at least it returns something other
than all zeros...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 Apr 2012 07:05:18 +0000 (00:05 -0700)]
altos: Allow STM DMA channels to be reserved for one use
This allows a single user of a DMA channel to reserve it for use
without needing to lock the mutex; this is required for DMA from the
ADC to work on megametrum as it wants to start DMA from an interrupt
handler, which cannot block on a mutex.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 03:35:17 +0000 (20:35 -0700)]
altos: Show temperature in stm-demo
Use the ADC to show current temperature
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 03:33:27 +0000 (20:33 -0700)]
altos: Use 384 cycle ADC sample time
This is plenty fast, and provides nice stable readings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 03:31:58 +0000 (20:31 -0700)]
altos: Add STM temperature sensor calibration data
Each stm32l has two-point factory temperature calibration data.
Provide access to that for displaying temperature data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:55:53 +0000 (18:55 -0700)]
altos: Add ADC support to megametrum firmware
Measures all MM igniter and battery voltages.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:55:20 +0000 (18:55 -0700)]
altos: Add ADC tests to stm-demo
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:54:32 +0000 (18:54 -0700)]
altos: STM SPI is not using interrupts itself
All SPI transfers are done via DMA, so the DMA interrupts suffice.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:53:12 +0000 (18:53 -0700)]
altos: Add support for STM ADC
DMA-based driver for the STM analog to digital converter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:44:11 +0000 (18:44 -0700)]
altosui: remove debug printf from AltosFlightStats
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:36:36 +0000 (18:36 -0700)]
altosui: When computing flight stats, auto-detect boost time
Detect when boost actually starts by looking for the last low
acceleration value before the recorded boost time. This improves the
computation of the boost state data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Apr 2012 01:35:26 +0000 (18:35 -0700)]
altosui: Integrate accel speed from very start of eeprom record
Don't wait for the flight computer to have detected boost--that's
often several samples after boost actually occurred, which can leave a
bunch of acceleration out of the speed computation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 08:01:33 +0000 (01:01 -0700)]
altos: Add ability to change radio frequency in TeleTerra
Provide a way to set the frequency locally.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 08:01:06 +0000 (01:01 -0700)]
altos: Make ao_config_set_radio public
Allows other bits of code to reset the radio parameters.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 07:25:50 +0000 (00:25 -0700)]
altos: Force radio channel to zero when setting frequency
Otherwise, the actual radio frequency will include the channel offset,
which is not useful.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 07:25:26 +0000 (00:25 -0700)]
altos: Make ao_freq_to_set reentrant
Save a bunch of data space this way.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 07:24:59 +0000 (00:24 -0700)]
altos: Shorten help strings
Save a bit of code space
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Apr 2012 07:23:55 +0000 (00:23 -0700)]
altos: Save memory in ao_config.c
Shorten help messages.
Stop setting aes_key on products not using aes key.
Signed-off-by: Keith Packard <keithp@keithp.com>