first cut at turnon scripts for EasyTimer v2
[fw/altos] / src /
2022-11-10 Keith Packardtelemetrum-v4.0: Set USE_SERIAL_1_STDIN to 0
2022-11-10 Keith Packardmetro-m0: Add GPS support
2022-11-10 Keith Packardsamd21: Leave serial RX interrupts enabled
2022-11-10 Keith Packarddrivers/ublox: Clean up some debug mode code
2022-11-10 Keith Packardtelemetrum-v4.0: Remove unused file
2022-11-09 Bdale GarbeeTeleMetrum v4.0 work in progress
2022-11-09 Keith Packardtelemetrum-v4.0: Add beeper and fix ADC defs
2022-11-09 Keith Packardmetro-m0: Hook up ADC sample from A pins
2022-11-09 Keith Packardsamd21: Hook up AltOS style ADC
2022-11-09 Keith Packardsamd21: Hook up AltOS timer functionality
2022-11-09 Keith Packardsamd21: Move DMA channel defs to ao_dma_samd21.h
2022-11-09 Keith Packardsamd21: Get beep code working
2022-11-08 Keith Packardmetro-m0: Demo pin interrupts
2022-11-08 Keith Packardsamd21: Wire up pin interrupts
2022-11-07 Keith Packardaltos/telemetrum-v4.0: It links
2022-11-07 Keith Packardsamd21: Stub out beep code
2022-11-07 Keith Packardsamd21: Stub out exti code
2022-11-07 Keith Packardsamd21: Shrink default stack to 512 bytes
2022-11-07 Keith Packardaltos/telemetrum-v4.0: Almost building
2022-11-07 Keith Packardsamd21: Get serial driver building
2022-11-07 Keith Packardsamd21: Add SPI configurations used by TM v4.0
2022-11-07 Keith Packardsamd21: Get ADC code compiling
2022-11-07 Keith Packardaltos/ms5607: Use ao_gpio_set instead of stm_gpio_set
2022-11-07 Keith Packardmetro-m0: Configure on-board SPI flash part
2022-11-07 Keith Packardsamd21: Add ability to use arbitrary pin configs with SPI
2022-11-06 Keith Packardsamd21: Macro-ize the DMA register settings a bit
2022-11-06 Keith Packardsnekboard: Need DMA for SPI now.
2022-11-06 Keith Packardsamd21: Use DMA for SPI send
2022-11-06 Keith Packardsamd21: Fix value defines to be unsigned long
2022-11-06 Keith Packardsamd21: Avoid divides in boot loader
2022-11-06 Keith Packardsamd21: Fix up DMA driver
2022-11-06 Keith Packardaltos: Add metro-m0 port for SAMD21G18 testing
2022-11-06 Keith Packardsamd21: Configure ROM/RAM values per device and provide...
2022-11-05 Keith Packardsnekboard: Add samd21 SPI test function
2022-11-05 Keith Packardaltos: Get SAMD21 SPI driver working in non-DMA mode
2022-11-04 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2022-11-02 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2022-11-01 Keith PackardAdd option to beep max height in feet rather than just...
2022-10-29 Bdale GarbeeMerge branch 'samd21' of ssh://git.gag.com/scm/git...
2022-10-28 Keith PackardAdd EasyMotor v3 firmware to release
2022-10-28 Keith Packardaltos: Allow 'c a 0' without Syntax Error
2022-10-28 Keith Packardeasymotor-v3: Fix beeper config
2022-10-28 Keith PackardMerge branch 'easymotor-v3'
2022-10-28 Keith PackardAdd EasyMini v3.0 firmware to release
2022-10-28 Keith Packardaltos: Allow setting telemetry interval to zero without...
2022-10-27 Keith Packardaltos/snekboard: Indicate that USB is used for stdio
2022-10-27 Keith Packardaltos/samd21: Automatically erase flash when writing
2022-10-27 Keith Packardaltos/samd21: Get USB driver working in AltOS
2022-10-27 Keith Packardaltos/samd21: Add register definitions
2022-10-27 Keith Packardaltos: Add sample samd21 application for snekboard
2022-10-27 Keith Packardaltos: Add SAMD21 bits
2022-10-27 Keith Packardaltos: Use --gc-sections
2022-10-26 Keith Packardaltos: Switch LED pin number to 8 bits
2022-10-23 Keith Packardaltos: Increase AES IV buffer to hold maximum AES state
2022-10-16 Bdale Garbeefirst stab at support for TeleMetrum v4.0
2022-09-26 Keith Packardaltos/snekboard: Indicate that USB is used for stdio
2022-09-26 Keith Packardaltos/samd21: Automatically erase flash when writing
2022-09-26 Keith Packardaltos/samd21: Get USB driver working in AltOS
2022-09-26 Keith Packardaltos/samd21: Add register definitions
2022-09-25 Keith Packardaltos: Add sample samd21 application for snekboard
2022-09-25 Keith Packardaltos: Add SAMD21 bits
2022-09-25 Keith Packardaltos: Use -ffunction-sections -fdata-sections
2022-09-25 Keith Packardaltos: Switch LED pin number to 8 bits
2022-09-24 Keith Packardeasymini: Elide symbols from combined .ihx file
2022-09-19 Keith Packardeasymini-v3.0: Create combined .ihx file for testing
2022-09-05 Keith Packardaltos: Document easymotor record length
2022-05-21 Keith Packardsrc: Add easymini-v3.0
2022-05-21 Keith Packardlpc: Make beeper configurable
2022-05-21 Keith Packardlpc: ADC 5 was busted
2022-04-07 Keith Packardaltos: Add EasyMotor-v3.0 to regular builds
2022-04-07 Keith Packardlpc: Shuffle more bits around for flash loader
2022-04-07 Keith Packardeasymotor-v3: Increase ADXL spi speed back to normal...
2022-04-07 Keith Packardlpc: Add SPI mode support. Use for ADXL375 on easymotor
2022-04-07 Keith Packardreduce adxl speed to 100kHz
2022-04-07 Keith PackardDisable adxl debug, set long delay
2022-04-07 Keith Packardaltos: Fix ADXL375 SPI mode definitions and usage
2022-04-07 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2022-04-05 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2022-04-04 Keith Packardlpc: Attempt to make beeper generate correct tone
2022-04-04 Bdale Garbeefix SPI index definition
2022-04-04 Bdale GarbeeRevert "adxl375: Disable spi duplex"
2022-04-04 Keith Packardadxl375: Disable spi duplex
2022-04-04 Keith Packardeasymotor-v3: enable adxl debugging
2022-04-04 Keith Packardlpc: Fixes for timer configuration
2022-04-04 Keith Packardlpc: Fix name of timer ioconf constants
2022-04-04 Keith Packardlpc: Fix name of timer ioconf for pio0_1
2022-04-04 Keith Packardlpc: Stick magic value at 0x2fc to let us use PIO0_1
2022-04-04 Keith Packardeasymotor-v3: Configure beeper
2022-04-04 Keith Packardlpc: Make beeper timer configurable
2022-04-04 Bdale Garbeeget ram usage under control, etc
2022-04-04 Bdale Garbeea few config tweaks
2022-04-04 Bdale Garbeefirst cut at EasyMotor v3 support
2022-04-04 Keith Packardtelegps-v0.3: Reduce stack size to fit in ram
2022-04-04 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2022-02-26 Bdale Garbeedial it down a bit more to not exceed +10 dBm, or 10 mW radio-limit
2022-02-26 Keith PackardAllow TX power to be limited to 10mW
2022-02-21 Keith Packardaltos: Document how delay_done is used in ao_pyro.c
2022-02-19 Keith Packardaltos: Deal with 8-character version numbers
2022-02-17 Keith Packardaltos: Add -Wconversion
2022-02-17 Keith Packardaltos/telemega-v5.0: Add casts to beep values
next