]>
git.gag.com Git - fw/altos/log
Keith Packard [Mon, 17 Nov 2014 00:39:18 +0000 (16:39 -0800)]
altos/teledongle-v1.8: Make this the same as teledongle v1.9
Remove RSSI LED blinking, add CRC error LED
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Nov 2014 00:38:12 +0000 (16:38 -0800)]
altos: Allow TeleMega to be built without MPU6000
Robert Braibish's board has a dead MPU6000; this fix lets the TeleMega
firmware build without that driver so the rest of the board could be verified.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Nov 2014 00:37:15 +0000 (16:37 -0800)]
altosui: Remove duplicate AltosUIPreferencesBackend.java
There's a copy in altosuilib
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 21:41:27 +0000 (13:41 -0800)]
altos/microsplash: fix .gitignore to ignore resulting binary
Keith Packard [Sun, 16 Nov 2014 21:40:15 +0000 (13:40 -0800)]
Add AltosDroid release note for version 1.5
Keith Packard [Sun, 16 Nov 2014 21:17:55 +0000 (13:17 -0800)]
altosdroid: East and West were flipped in all GPS output
East is positive, West is negative
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 06:52:42 +0000 (22:52 -0800)]
altosdroid: Save AltosState and restore at startup
Instead of re-parsing the old logfile, save the current state in the
preferences database and restore at restart of the
TelemetryService. This makes the state get restored even before the BT
connection is recovered.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 06:50:31 +0000 (22:50 -0800)]
altoslib: add AltosPreferences state save/restore interfaces
This serializes an entire AltosState object and stores it in the
preferences database for later retrieval. AltosDroid uses this to
recover the old state data when restarting.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 06:49:06 +0000 (22:49 -0800)]
altosdroid: TabMap needs to expose () constructor
Otherwise we get an exception at startup time for some reason.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 06:48:15 +0000 (22:48 -0800)]
altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
This lets us store arbitrary binary data in the preferences database
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 06:46:01 +0000 (22:46 -0800)]
altosdroid: Don't display MISSING flight number
Just check and clear the entry if we end up seeing that value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Nov 2014 00:03:32 +0000 (16:03 -0800)]
altoslib: Make AltosState serializable
This involved making every class it references serializable as well
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 10 Nov 2014 22:41:17 +0000 (14:41 -0800)]
altoslib: Missing headers for mag sensor in CSV output
Kelsey Black <nmonic@gmail.com> reported that the TeleMega CSV output
was missing the header labels for the mag sensor data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 04:04:47 +0000 (20:04 -0800)]
altos: Reset interrupt flags before TX in CC1200 driver
Failing to reset the flags set during interrupt leads to
short-circuiting transmission and not a lot of packets going out.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:05:49 +0000 (16:05 -0800)]
altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:04:56 +0000 (16:04 -0800)]
altos/lpc: Disable JTAG when using pins for GPIO
JTAG is enabled by default, making those pins not support GPIO unless
specifically configured.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:04:14 +0000 (16:04 -0800)]
altos/lpc: Declare SPI send parameters as const
This matches STM
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:02:47 +0000 (16:02 -0800)]
altos: Use other TeleDongle LED for CRC-invalid packet reporting
Instead of blinking out some fake-o RSSI indication, just blink the
red LED when a packet with a bad CRC is received.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:02:07 +0000 (16:02 -0800)]
altosuilib: GPS errors are recorded in floating point, not integers
Fix the format used to present them in the info table.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:01:24 +0000 (16:01 -0800)]
altos: Use AO_SPO_SPEED_FAST for CC1200
This asks for the fastest available SPI speed, instead of fixing it to
8MHz, which may not be supported on every architecture.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Nov 2014 00:00:06 +0000 (16:00 -0800)]
altos: Stop attempting to ramp power on CC115L
The PA register on the 115L isn't in any way monotonic, making the old
code broken. Just rempve it instead of fixing it; we don't ramp
anywhere else...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Nov 2014 23:58:42 +0000 (15:58 -0800)]
altos: Declare port register type only in arch header
Instead of defaulting to 8 bits, explicitly require declaration of the
type of the port register for each architecture.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Nov 2014 21:27:29 +0000 (13:27 -0800)]
Move teledongle 1.9 to 1.8; there's a new 1.9
1.9 is now the lpc11u14-based form-factor prototype board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Nov 2014 06:11:44 +0000 (22:11 -0800)]
altos: Rename microwater to microsplash
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 31 Oct 2014 04:59:45 +0000 (21:59 -0700)]
altosui: Pop up 'Connecting' dialog during Monitor Idle
This was a bit harder than expected as I had to wire up a way to shut
down the whole monitor idle window when you clicked on the cancel button.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Oct 2014 04:14:25 +0000 (21:14 -0700)]
altos: Increase CC1200 SPI data rate to 8MHz
This got set to 125kHz to make debugging with a logic analyzer easier
and never changed back to a reasonable speed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Oct 2014 02:56:25 +0000 (19:56 -0700)]
altos: Fix up telemetry delay computations
With RDF, APRS and telemetry all being sent at varying rates,
computing when to send the next radio data is not as simple as sending
telemetry and then figuring out whether to send RDF and/or APRS.
Fix this by computing times for the next telemetry/rdf/aprs packet,
and only sending each when that time has passed. Compute the delay
until the next radio activity as the minimum time to any transmission.
This also adds code to the config bits to reset the radio times
whenever something changes that might affect which radio data to send
next.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Oct 2014 00:44:48 +0000 (17:44 -0700)]
altos: Perform cc1200 calibration less often. Tweak radio params
This performs calibration after every 4 operations, or when the
frequency changes. This reduces the time it takes to get to receive
mode.
This also makes the sync and preamble qualifiers more strict to reject
bad packets.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 18:20:44 +0000 (11:20 -0700)]
altos: Remove old AO_SEND_ALL_BARO bits
This was used for testing the original TeleMini which couldn't log
data at full speed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 17:21:30 +0000 (10:21 -0700)]
altos: Build TeleDongle v1.9 by default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 17:20:07 +0000 (10:20 -0700)]
altos: Increase PQT value for cc1200 improving sensitivity
The PQT value indicates how 'good' the preamble is; higher values
allow a lower quality of preamble to pass the test, permitting more
packets to be decoded.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 17:17:48 +0000 (10:17 -0700)]
altos: Sort out ao_gps_print altitude fetching
ao_gps_print is used by both teledongle/telebt and the host-based GPS
test code. The first instance uses the old internal GPS structure,
containing just a 16-bit altitude while the second uses an
ao_telemetry structure, which contains 32 bits split into two
members.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Oct 2014 03:36:18 +0000 (05:36 +0200)]
altos/teledongle-v1.9: Add remaining code to complete the project
This turns the prototype board into a full teledongle
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Oct 2014 03:34:06 +0000 (05:34 +0200)]
altos: Complete cc1200 driver
Deal with differences between cc1120 and cc1200, including built-in
packet support and various register changes.
This now works to send and receive telemetry, as well as send APRS and
RDF.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Oct 2014 03:35:10 +0000 (05:35 +0200)]
altos: Expose telemetry altitude macros even without GPS
This allows for APRS testing in the new teledongle code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Oct 2014 03:32:00 +0000 (05:32 +0200)]
altos: Mark STM ao_spi_send as taking const pointer
We don't write to this, so let it be const for type checking
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 02:10:45 +0000 (19:10 -0700)]
ao-tools/ao-send-telem: Add verbose, fake and rate options
Verbose dumps some data while sending packets.
Fake sends constructed packets, once every 500ms.
Rate sets the transmit bit rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 15 Oct 2014 23:10:11 +0000 (16:10 -0700)]
altosuilib: Try to detect the architecture when loading JNI lib
Look at sun.arch.data.model and os.arch to try and load the right
libaltos file the first time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 25 Oct 2014 04:21:19 +0000 (21:21 -0700)]
altoslib: synchronize access to serial debug output list
This list is access by both the receiver and the monitor task, so it
needs to be locked to prevent collisions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 9 Oct 2014 19:11:16 +0000 (13:11 -0600)]
document pyro current limits in an appendix
Keith Packard [Sun, 5 Oct 2014 07:07:10 +0000 (00:07 -0700)]
altos: Add prototype TeleDongle v1.9 code
Lights up the hardware, sends carrier and RDF tones. A bit more cc1200
work to be done still.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 5 Oct 2014 07:03:28 +0000 (00:03 -0700)]
altos: Copy cc1120 driver to cc1200 driver and hack a bit
The cc1200 is similar to the cc1120, although many registers have
changed.
This driver can send a bare carrier and an RDF tone, but does not yet
receive or transmit telemetry data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Oct 2014 07:30:54 +0000 (00:30 -0700)]
altos: Fix syntax error with ao_log_mega change.
Missed a semi-colon.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Oct 2014 07:11:13 +0000 (00:11 -0700)]
altoslib: Compute tilt angle from eeprom data
This copies the computation of tilt angle from the firmware so that
post-flight analysis can also show the data.
This change also renames all of the imu values to make them easier to
understand:
accel gyro axis
along roll length of the board
across pitch across the board
through yaw through the board.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Oct 2014 07:10:03 +0000 (00:10 -0700)]
altosui: Update 'Imperial Units' checkbox when units change
If you have two graphs running, make sure the imperial units
checkboxes agree.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Oct 2014 07:07:39 +0000 (00:07 -0700)]
altoslib: Deal with new Mega log format that has 32-bit gyro cal
This adds parsing for the new log format type to get all 32 bits of
the gyro calibration data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Oct 2014 07:04:39 +0000 (00:04 -0700)]
altos: Record 32-bits for gyro calibration values
The gyro ground calibration values are scaled by 512 to provide a bit
more precision for the computations. This means they don't fit in 16
bits, so change the format of the flight log record. Also change the
reported format so that AltosUI has a chance of figuring it out.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 29 Sep 2014 19:57:27 +0000 (12:57 -0700)]
altosui: Check for map and stats table when changing units/fonts in graph
AltosGraphUI wasn't making sure the map and stats tables were present
before attempting to adjust font size and units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 29 Sep 2014 19:56:04 +0000 (12:56 -0700)]
altos: Handle antenna down in ao_flight_test
Parse the Pad orientation config value and flip the accelerometer
value back around in antenna down configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Sep 2014 05:58:13 +0000 (22:58 -0700)]
ao-bringup: Auto-select programmer for teledongle turnon
Bdale's programmer is SN 100, Keith's is SN 186. Use the username to
figure out which one to use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Sep 2014 05:53:39 +0000 (22:53 -0700)]
altos: Make sure we drop the SPI mutex when aborting cc1120 recv
The cc1120 receive code is 'twisty', in that it acquires the SPI mutex
in the middle of an interrupt handler so that it can quickly start the
radio when the signal comes in. This means we have to be careful to
drop that mutex in all paths which leave the receive code, including
when the packet receive is aborted mid-way through the process.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 13 Sep 2014 23:56:51 +0000 (17:56 -0600)]
store cal value correctly even when we didn't need to change it
Keith Packard [Sat, 13 Sep 2014 22:59:18 +0000 (15:59 -0700)]
altosdroid: Update notebook to reflect current status
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 22:52:56 +0000 (15:52 -0700)]
altosui: Bring up main window when doing --replay or --graph
This shows the main window when replaying or graphing files so that
you can interact with that, changing the global configuration or doing
other stuff.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 22:51:50 +0000 (15:51 -0700)]
altosui: Fix --replay to run in realtime after boost
I added the ability to rapidly replay files for AltosDroid to recover
from a crash, but didn't change AltosUI to use realtime mode again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 13 Sep 2014 22:37:42 +0000 (16:37 -0600)]
reflect filename changes in LLC repo
Keith Packard [Sat, 13 Sep 2014 22:23:40 +0000 (15:23 -0700)]
altosdroid: Automatically sign the released version if the key is available
Look in ~/altusmetrumllc for release.keystore and Passphrase and
enable building and signing of the release binary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 20:38:31 +0000 (13:38 -0700)]
altosdroid: Update version code and name for 1.5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 20:00:58 +0000 (13:00 -0700)]
Mark master branch as past the 1.5 point
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 13 Sep 2014 18:31:08 +0000 (12:31 -0600)]
updated to reflect changes from 1.5 release
Keith Packard [Sat, 13 Sep 2014 03:58:26 +0000 (20:58 -0700)]
ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
The script lets you re-try each one when they fail, which is nice if
you're hand-holding the setup.
The TeleMetrum and TeleMega tests are adapted from the EasyMega tests
and are hooked up to the turnon scripts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 03:57:05 +0000 (20:57 -0700)]
ao-tools/ao-test-igniter: Remove bogus printf
This must have been left over from testing; it prints "device (null)",
which isn't very useful.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 03:56:29 +0000 (20:56 -0700)]
ao-tools/ao-test-gps: Improve output formatting
Add a newline before printing out the flags and sats at exit time
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 00:22:37 +0000 (17:22 -0700)]
ao-bringup: Use C version of ao-test-gps in test-telegps
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 Sep 2014 00:22:03 +0000 (17:22 -0700)]
ao-tools: Add ao-test-gps program
This waits for GPS to report lock
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Sep 2014 23:38:59 +0000 (16:38 -0700)]
ao-bringup: Use C version of test-flash for telegps
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Sep 2014 02:59:58 +0000 (19:59 -0700)]
altosui: Ignore built .desktop file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 12 Sep 2014 02:56:13 +0000 (19:56 -0700)]
altos: Make sure we don't beep out continuity twice in idle mode
If the battery voltage report takes longer than the initialiation
sequence, we could get to the state reporting after the state had
switched from startup to idle. This would result in continuity being
reported the first time through the loop. Then, as the state had
already changed, we'd pass through the while test and go back to
report continuity a second time.
Fixed by using the state remembered before beeping out the voltage to
decide whether to report the continuity.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Sep 2014 22:57:21 +0000 (15:57 -0700)]
altos: Add smaller altitude table file to .gitignore
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Sep 2014 22:56:14 +0000 (15:56 -0700)]
altos/test: Add TMv2 test program to .gitignore
Keith Packard [Thu, 11 Sep 2014 22:00:25 +0000 (15:00 -0700)]
altos: Fix ability to disable telemetry by setting interval to 0
For non-zero telemetry intervals, the radio code limits the value
based on the data rate. However, a zero interval means that telemetry
should be entirely disabled, so that value should be left alone when
checking.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Sep 2014 21:23:29 +0000 (14:23 -0700)]
telegps: Was mis-configuring the 'Configure Device' dialog
Make sure we show 'rate_label' instead of showing 'radio_enable_label'
twice.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Sep 2014 21:14:07 +0000 (14:14 -0700)]
altoslib: Stop re-loading previous flight when starting telemetry monitoring
This feature is necessary on AltosDroid because there's no other UI
for reloading an old flight. It's not useful on the desktop where you
really just want to see new telemetry; old telemetry is availbale
through the 'graph flight' or 'replay' mechanisms.
AltosDroid uses a different class for reading telemetry data, so we
can just remove this feature from altoslib at this point.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 10 Sep 2014 07:29:56 +0000 (01:29 -0600)]
use dh_installmime, which requires telling configure to stay out of the way
Bdale Garbee [Wed, 10 Sep 2014 06:26:10 +0000 (00:26 -0600)]
another build dep
Bdale Garbee [Wed, 10 Sep 2014 07:30:37 +0000 (01:30 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Wed, 10 Sep 2014 07:03:53 +0000 (00:03 -0700)]
configure: Add --disable-install-shared-mime-info option
This inhibits the installation of the shared mime info data file and
updating of the shared mime database. Necessary if you want to use a
distribution-specific shared mime installation hook, like dh_installmime
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 10 Sep 2014 06:43:10 +0000 (23:43 -0700)]
.desktop: Use %F instead of %f in .desktop files
%F is a list of files, %f is a single file. All of our tools can
handle lists of files, so make the .desktop file reflect that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 10 Sep 2014 05:44:45 +0000 (23:44 -0600)]
more build dependencies for processing icons
Keith Packard [Wed, 10 Sep 2014 06:00:14 +0000 (23:00 -0700)]
icons: Use DESTDIR when updating mime/icon caches
This is done in install-data-hook and needs to explicitly use DESTDIR
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:38:03 +0000 (09:38 -0700)]
altoslib/altosuilib: clean all versions of the .jar file
When we switch libary versions, we want to remove the old ones; just
have 'make clean' remove all versions of the libaries.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:37:13 +0000 (09:37 -0700)]
altoslib/altosuilib: Add EasyMega support
This makes flashing find the right files, and Monitor Idle show all of
the state data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:09:22 +0000 (09:09 -0700)]
altos/easymega: Set USB PID for EasyMega to 0x0028
It was using 0x0023, which is for TeleMega. 0x0028 is what's listed in
usbvidpid.h.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:02:51 +0000 (09:02 -0700)]
altoslib: Fix idle monitor parsing of MMA655x state
There's no ':' after 'MMA655X value' in the output, and the parser
returns 'true' on success, not false.
With this, 'Monitor Idle' now reports correct accelerometer readings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 9 Sep 2014 16:01:42 +0000 (09:01 -0700)]
Tag version 1.4.9.3
This should be the final firmware version for 1.5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 05:56:25 +0000 (22:56 -0700)]
altosui: Include EasyMega firmware in fat release
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 7 Sep 2014 05:42:47 +0000 (23:42 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Sun, 7 Sep 2014 05:28:13 +0000 (22:28 -0700)]
doc: Update for version 1.5 release
Add stuff about EasyMega and telemetry rate configuration. Update
screen shots as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:44:30 +0000 (20:44 -0700)]
altos: Scale packet master receive delay by baud rate
Increase the time we wait for return packets based on the remote
protocol baud rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:43:32 +0000 (20:43 -0700)]
altoslib: Increase timeouts when using low baud rate remote protocol
When using 2400 or 9600 baud remote link rates, we need to increase
the packet timeout from 500ms to much longer values to avoid annoying
the user with timeout warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:41:58 +0000 (20:41 -0700)]
altoslib: Update local callsign/baud rate when using remote protocol
We've had code to synchronously update the local and remote radio
frequencies when doing configuration over the remote link. This patch
adds the same code when changing the call sign and baud rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Sep 2014 03:39:37 +0000 (20:39 -0700)]
altos: Reduce deviation at 2400/9600 baud
There's no reason to use 20.5kHz deviation at 2400 and 9600 baud, and
if we get a better receiver, we'll want to use narrower deviation to
have less bandwidth sucking noise into the radio. The new values are
(nominally) 5.125kHz deviation for 9600 baud and 1.5kHz deviation for
2400 baud.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 6 Sep 2014 19:41:36 +0000 (13:41 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Conflicts:
ao-bringup/turnon_telemega
Bdale Garbee [Sat, 6 Sep 2014 19:40:59 +0000 (13:40 -0600)]
tweaking test scripts
Keith Packard [Sat, 6 Sep 2014 07:39:41 +0000 (00:39 -0700)]
altosdroid: Mark completed items as 'done'
Frequency display
Re-load data on restart
Auto re-connect to TBT at correct freq
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 07:14:26 +0000 (00:14 -0700)]
altosdroid: Add imperial unit support
Provides a menu entry to switch units, changes all value displays to
use the AltosLib units conversion code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 06:10:07 +0000 (23:10 -0700)]
altosdroid: Update tab contents before switching
Make sure the new tab contents are updated before switching tabs so
that the user doesn't see old stuff.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Sep 2014 05:06:21 +0000 (22:06 -0700)]
altosdroid: Ignore TelemetryService messages after service shutdown
Messages may get delivered after the service has been shut down;
ignore those.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 18:28:40 +0000 (11:28 -0700)]
altosdroid: add new TelemetryState.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Sep 2014 05:59:09 +0000 (22:59 -0700)]
altosui: Don't mark altimeter dirty when opening pyro panel
Skip setting the UI dirty when filling in the pyro firing time value.
Signed-off-by: Keith Packard <keithp@keithp.com>