]>
git.gag.com Git - fw/altos/log
Keith Packard [Tue, 10 Jun 2014 18:31:53 +0000 (11:31 -0700)]
altoslib: Use GPS speed/height values when other sensors are missing
This lets TeleGPS report height/speed values without needing to
customize every AltosState user to pull out GPS values when the other
sensors aren't present.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 18:30:36 +0000 (11:30 -0700)]
altosuilib: Split battery graph enable out from other adc enables
This lets TeleGPS just show the battery voltage values without also
adding enable lines for the other flight computer ADC values like
ignitor voltages.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 17:19:43 +0000 (10:19 -0700)]
altoslib: Check for time going backwards when replaying from file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 17:18:44 +0000 (10:18 -0700)]
altoslib: Add new 'stateless' flight state for TeleGPS
TeleGPS has no flight state, so add a new 'stateless' state for code
to handle this case differently than any of the existing states
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 17:15:47 +0000 (10:15 -0700)]
altoslib: TeleGPS no longer logs satellite information
This doubles the amount of space available to log position information
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 17:14:07 +0000 (10:14 -0700)]
altoslib/altosui/telegps: Switch TeleGPS config to motion/interval
TeleGPS had configurable boost-detect values; those have been replaced
with a configurable stop-tracking motion limit and logging/telemetry
interval value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 17:11:03 +0000 (10:11 -0700)]
altoslib/altosui/telegps: Change log size configuration
* Use new log-space value provided by firmware when available.
* Divide that up into 1-8 flights and offer those sizes as options to
the user instead of a fixed set of sizes.
* Show how many flights each selection will store
* This also checks values provided by the user
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:55:04 +0000 (09:55 -0700)]
altos: Set TeleGPS default log size to half of avaiable memory
LPC11U14 doesn't have on-chip config space, so we're consuming a block
of external flash. As a result, only 1984kB are available for
logging. Set the default log size to half of that to store two flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:52:15 +0000 (09:52 -0700)]
altos: Simplify tracker logic, removing boost detect
This removes the ao_flight_state value from the tracker code and makes
it simply log position information when the device has moved within
the last 10 log intervals. This also changes the configuration
parameters to define what 'motionless' means, and what interval to
configure the GPS receiver for, log data and send telemetry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:47:04 +0000 (09:47 -0700)]
Revert adding state to GPS location packets
TeleGPS no longer has ao_flight_state
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:44:57 +0000 (09:44 -0700)]
Revert "ao-tools: Parse TeleGPS state value from gps location packet"
This reverts commit
428d09294ba0395fedd71346ad00fd90a4cdde97 .
Keith Packard [Tue, 10 Jun 2014 16:42:43 +0000 (09:42 -0700)]
altos: Make extra pyro channel firing time configurable
This adds a 'I' parameter to set the extra pyro channel firing time
(in ticks). This has no effect on the main/drogue channels.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:37:43 +0000 (09:37 -0700)]
altos: Report total available log space in version command
This provides a more accurate means of determining available log space
than guessing whether some portion of the flash chip holds
configuration data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Jun 2014 16:36:59 +0000 (09:36 -0700)]
Revert "altos: Write current flight state to GPS data from GPS drivers"
This reverts commit
db6003d34595fbd103d5b131912b6a797254f1c5 .
Keith Packard [Sun, 8 Jun 2014 23:08:30 +0000 (16:08 -0700)]
Revert "altoslib: Parse TeleGPS state value from GPS telemetry packet"
This reverts commit
d69547796caf74405f8304d23d4ae318315bbd7b .
Keith Packard [Sun, 8 Jun 2014 05:37:30 +0000 (22:37 -0700)]
Bump to version 1.3.2.4
Keith Packard [Sun, 8 Jun 2014 05:25:17 +0000 (22:25 -0700)]
altoslib: Recover battery voltage from TeleGPS configuration packet
TeleGPS stuffs battery voltage in the apogee_delay slot of the
configuration packet. Pull it out from there and stick it into the
current state.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 05:24:08 +0000 (22:24 -0700)]
altoslib: TeleMega uses 5.6k/10k divider for v_batt
I suspect the 15 and 27 values are a 'close approximation' for integer
work on the cc1111 devices
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 05:23:19 +0000 (22:23 -0700)]
altos: Enable ADC for TeleGPS v1.0 battery voltage measuring
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:57:43 +0000 (21:57 -0700)]
altos: Encode TeleGPS battery voltage in configuration packet
TeleGPS doesn't need apogee delay, so re-purpose it for the battery voltage
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:13:40 +0000 (21:13 -0700)]
altoslib: Parse TeleGPS state value from GPS telemetry packet
TeleGPS adds 0x80 to the state value to signify that this otherwise
unused byte contains the current state value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:12:44 +0000 (21:12 -0700)]
ao-tools: Parse TeleGPS state value from gps location packet
TeleGPS encodes state in a spare gps location packet byte, masking in
0x80 to signify that the state value is valid
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:12:09 +0000 (21:12 -0700)]
altos: Make telegps builds depend on ao_tracker.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:11:33 +0000 (21:11 -0700)]
altos: Reduce tracker GPS buffer to 4 samples
We just don't have enough RAM for 8 samples.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:05:01 +0000 (21:05 -0700)]
altos: Define lat/lon sum variables as 64-bit instead of 16
Oops. 16 bits won't hold position information...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Jun 2014 04:02:26 +0000 (21:02 -0700)]
altos: Use 0x80 to indicate valid state value in the GPS location packet
And only set this for tracker products; other products place state in
separate state packets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 19:17:46 +0000 (12:17 -0700)]
Set version to 1.3.2.3
Mayhem 2014 Saturday 2014-6-7
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:52:28 +0000 (11:52 -0700)]
telegps: Track graph windows as one of the TeleGPS windows
TeleGPS exits when the number of windows goes to zero; track graphing
windows in addition to the usual flight monitoring windows.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:50:42 +0000 (11:50 -0700)]
altosuilib: Fix crash when initializing site map cache
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:50:04 +0000 (11:50 -0700)]
altosuilib: Add GPS altitude as a possible graph value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:49:14 +0000 (11:49 -0700)]
altosuilib: Show GPS instead of (missing) flight data for TeleGPS graphs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:47:11 +0000 (11:47 -0700)]
altoslib: Record whether flight data includes sensor values in AltosFlightStats
Provide a way to elide the usual flight data from a graph for TeleGPS
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:46:32 +0000 (11:46 -0700)]
altoslib: Add TeleGPS log parsing code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:44:55 +0000 (11:44 -0700)]
altoslib: All products with logging have the 'l' command
Instead of listing products with the 'l' command, just exclude
products that don't have logging from using the 'l' command to collect
the number of stored flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:44:07 +0000 (11:44 -0700)]
altos: Switch TeleGPS to GPS logging format
It's customized for TeleGPS uses
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:41:59 +0000 (11:41 -0700)]
altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARK
All products placing config and erase marks in on-CPU EEPROM needs to
configure the erase code correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:40:41 +0000 (11:40 -0700)]
altos: Write tracker logging from tracker thread directly
Also, logs 8 pre-launch GPS packets so we can get the ground position.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:39:10 +0000 (11:39 -0700)]
altos: Write current flight state to GPS data from GPS drivers
This will be useful with TeleGPS which has no other packet containing
flight state.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:34:29 +0000 (11:34 -0700)]
altos: Add TeleGPS logging format
This is mostly like the mega format, but places the flight state in a
spare byte of the GPS data and writes the gps starting location to the
flight packet.
Log data is written by the main tracker thread; there's no reason for
a separate thread given the GPS update rate and the lack of flight
controls. This means ao_log_gps has an API to be called from there,
rather than a thread to run.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 18:01:14 +0000 (11:01 -0700)]
altos/telemega-v1.0: Adjust config params to make flight erase work
Flight erase records are supposed to be written after the ao_config to
eeprom in telemega. They were getting written in the middle of one of
the pyro channel config blocks. Put a bunch of space between the two
by making the config max 1024 bytes instead of 128 bytes.
Set the log erase marker to 0x55 -- eeprom comes from the factory as
0x00, so we use any value other than 0x55 to indicate 'unused' erase
slots.
Save space for more flight erase blocks; we've got plenty.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 17:54:14 +0000 (10:54 -0700)]
altos: Clear out eeprom erase records when writing entry 0
When writing config/erase to eeprom, there's no 'erase' operation as
on-chip eeprom is writable at a byte level. As such, we can't tell
when the erase blocks get reset when the config gets written. When
this happens, erase block 0 gets written explicitly, so just use that
call to trigger explicit erasing of the data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 17:09:51 +0000 (10:09 -0700)]
altos: Allow value other than 0 for marking erased flights
on-chip eeprom doesn't erase to 0xff, so let TeleMega use a different
value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 17:05:21 +0000 (10:05 -0700)]
altos: Allow AO_CONFIG_MAX_SIZE to be configured. Validate it.
TeleMega config is 200 bytes. AO_CONFIG_MAX_SIZE was 128. That didn't
work out well when logging erased flight information. Allow TeleMega
to use a larger value (1k), and then do a compiler hack to make sure
the defined value is at least as large as the ao_config structure.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jun 2014 14:41:11 +0000 (07:41 -0700)]
altos: Move ao_tracker.c to kernel
Doesn't make sense to be in product
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:42:10 +0000 (21:42 -0700)]
altos: Add telegps-v1.0 code and loader
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:40:39 +0000 (21:40 -0700)]
altos/telegps-v0.3: Remove ao_flight_number from main program
We've got logging enabled now
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:39:50 +0000 (21:39 -0700)]
altos/telegps-v0.3: Disable APRS by default. Set log max to 1M
And adjust default radio cal to be a bit closer
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:37:38 +0000 (21:37 -0700)]
altos: Force telemetry on by default for v0.3 TeleGPS boards
These don't have a USB connect indicator, so just turn on telemetry by
default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:36:16 +0000 (21:36 -0700)]
altos/lpc: HAS_USB_CONNECT has been changed to mean a custom pin
The LPC stuff isn't actually very useful and TeleGPS uses a custom pin
instead, and was using HAS_USB_CONNECT to mean the same thing. That
wasn't good.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 04:35:41 +0000 (21:35 -0700)]
altos: Fix config to set default log size for all devices with log
Not just devices with flight
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:55:26 +0000 (18:55 -0700)]
altos: Add AO_LOG_FLIGHT packet to TeleGPS logs
This encodes the flight number for tracking of data files.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:49:59 +0000 (18:49 -0700)]
altos/telegps-v0.3: Add tracker task
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:49:01 +0000 (18:49 -0700)]
altos: Add debug to tracker to force launch
This lets us test the move from pad to drogue state
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:47:27 +0000 (18:47 -0700)]
altos: tracker distance computation flipped arguments around
ao_distance takes (lat, lon, lat, lon) not (lat, lat, lon, lon)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:45:18 +0000 (18:45 -0700)]
altos: Fix tracker start state
Make sure log can start by scanning existing logs
Enable RDF by default
Turn off telemetry until we decide whether to turn it on in the loop
Allow TeleGPS v0.3 to run without ADC
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:44:26 +0000 (18:44 -0700)]
altos: Stick flight state in GPS location packets
Useful for TeleGPS
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:35:45 +0000 (18:35 -0700)]
altos: Have tracker average 5 GPS samples before moving to pad mode
Avoids early GPS noise right after lock
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:33:33 +0000 (18:33 -0700)]
altos: Change tracker not-moving speed to 2m/s and document
Just adjust to avoid sensing motion from GPS noise
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 01:31:06 +0000 (18:31 -0700)]
altos: ao_distance was overflowing when checking for longitude wrap
Need to shift everyone right one bit to fit in 32 bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 00:24:57 +0000 (17:24 -0700)]
altos: Allow cc115l driver to be built without radio power control
TeleGPS just wants full power, so remove the configuration option
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 00:14:28 +0000 (17:14 -0700)]
altos: Include sensor logging task only on flight boards
This lets TeleGPS use the logging infrastructure without wasting a
task to log sensor data
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 00:12:06 +0000 (17:12 -0700)]
altos: Add tracker task for TeleGPS
This replaces the flight code to monitor GPS state and switch flight
states between startup/pad/drogue
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Jun 2014 00:10:28 +0000 (17:10 -0700)]
altos: Add ao_distance.c to compute cartesian distances on the globe
This is not a great circle distance, but should be good enough for
points reasonably close together
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 Jun 2014 23:52:36 +0000 (16:52 -0700)]
telegps: Update icon and icon building
Switch to satellite icon, build the osx and windows icons.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 Jun 2014 23:50:29 +0000 (16:50 -0700)]
altosuilib: Let the user hand-edit the preload map radius
In case they want more than 5
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 06:43:54 +0000 (23:43 -0700)]
doc: Create release notes for version 1.4
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:59:23 +0000 (22:59 -0700)]
telegps: Trap AltosConfigDataException in telegps config
This was added for pyro configuration errors in AltosUI
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:23:31 +0000 (22:23 -0700)]
altoslib: Add missing AltosConfigDataException file
Keith Packard [Tue, 3 Jun 2014 05:07:39 +0000 (22:07 -0700)]
altosui: Display error message when parsing pyro channel values fails
Build an exception handling chain to get numeric parse errors
propagated all the way back to the original 'save' command and up into
a dialog window, including the pyro channel, field and value that were
in error.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:06:22 +0000 (22:06 -0700)]
altosui: Fix pyro channel value formatting
Was using %6.1f for 1 and 2 fraction digit values as the
conditional structure for figuring out which format to use was
broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:05:11 +0000 (22:05 -0700)]
altos: Fetch/store only 8 bits for pyro state values
These fields are uint8_t, not int16_t. Fetching and storing 16 bits is
a bad idea.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:04:11 +0000 (22:04 -0700)]
altos: Maximum pyro configuration parameter has 4 bytes in the name
"f>=" needs four bytes, not just three to store the whole string. If
we only store three, then we never manage to compare correctly as the
null terminating byte is missing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Jun 2014 05:03:26 +0000 (22:03 -0700)]
altos: Configuring pyro channels can use more than 48 characters
Increase the command buffer from 48 to 128 bytes to hold the longest
pyro configuration commands
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 May 2014 00:27:10 +0000 (17:27 -0700)]
altos: Allow sparse GPS data logging for TeleGPS
When the device hasn't moved for a while, stop logging data. Start as
soon as it moves again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 May 2014 00:30:08 +0000 (17:30 -0700)]
altos: Test APRS altitude encoding
Verify fixed point version against naïve implementation
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 May 2014 00:24:51 +0000 (17:24 -0700)]
altos: Switch APRS altitude encoding computation to fixed point
APRS altitude is logarithmically encoded, so this implementation
includes a fixed point log-base-2 function along with a bit of other
fixed point stuff. This eliminates all floating point from TeleGPS,
saving around 4kB of code space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 May 2014 00:17:42 +0000 (17:17 -0700)]
telegps: Add config for tracker starting distances
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 30 May 2014 05:03:48 +0000 (22:03 -0700)]
telegps: Fixup windows fat build harder
Keith Packard [Fri, 30 May 2014 04:48:11 +0000 (21:48 -0700)]
TeleGPS firmware isn't quite ready, don't include in windows fat build yet
Keith Packard [Fri, 30 May 2014 04:37:53 +0000 (21:37 -0700)]
Capture windows build error messages
Keith Packard [Thu, 29 May 2014 23:39:26 +0000 (16:39 -0700)]
telegps: Add missing TeleGPSGraphUI.java file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 21:40:39 +0000 (14:40 -0700)]
Build telegps distribution bits with 'make fat'
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 21:36:14 +0000 (14:36 -0700)]
telegps: Add graph display
Moved the altosui graph files to altosuilib and fixed things up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 21:03:58 +0000 (14:03 -0700)]
java: Refactor AltosFlightDisplay units and font update handling
Make AltosFlightDisplay explicitly implement AltosFontListener and
AltosUnitsListener interfaces to make everyone use the same API. Then,
actually go implement units listeners so that changing units updates
all of the active displays immediately
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 17:16:15 +0000 (10:16 -0700)]
telegps: Add info table
Move a couple of files from altosui to altosuilib, hook up the info
table after changing it to implement the AltosFlightDisplay interface
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 05:53:06 +0000 (22:53 -0700)]
telegps: Add flash device functionality
Move bits from altosui to altosuilib and use those.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 05:45:23 +0000 (22:45 -0700)]
telegps: Auto-connect to any base stations plugged in at startup
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 05:06:43 +0000 (22:06 -0700)]
telegps: Don't try to ship TeleGPS firmware yet
It's not quite ready. Instead, ship TBT and TD firmware.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 04:56:52 +0000 (21:56 -0700)]
telegps: Add 'Info' tab
This contains a summary of the tracking info, including position,
speed and course.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 03:58:01 +0000 (20:58 -0700)]
telegps: Hook up data download dialog
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 03:48:59 +0000 (20:48 -0700)]
telegps: Add scan UI
Move scan UI bits into altosuilib, allow telegps to not show telemetry
format options.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 03:24:04 +0000 (20:24 -0700)]
telegps: Add preferences dialog
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 03:19:44 +0000 (20:19 -0700)]
telegps: Add device configuration dialogs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 03:00:10 +0000 (20:00 -0700)]
telegps: Use altosui's Instdrv NSIS plugin for telegps
Instead of copying it, just point at it
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 02:50:52 +0000 (19:50 -0700)]
telegps: Working towards building fat versions of telegps application
Lots more of the bits necessary for windows/macosx
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 02:45:01 +0000 (19:45 -0700)]
doc: Add outline of TeleGPS doc
No actual content, mostly a place holder to make the build work
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 May 2014 02:44:21 +0000 (19:44 -0700)]
Mark version 1.3.2.2
Preliminary 1.3.3 version (1.4?)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 May 2014 23:08:30 +0000 (16:08 -0700)]
telegps: Add first version of telegps
Not much implemented yet, but a shell of the UI and the map
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 May 2014 23:06:14 +0000 (16:06 -0700)]
altosui/altosuilib: Shuffle lots more code from altosui into
altosuilib
All of the bluetooth management stuff, and AltosSerial.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 May 2014 17:43:09 +0000 (10:43 -0700)]
Document the need for ~/altusmetrumllc/google-maps-api-key
Stick this in Releasing
Signed-off-by: Keith Packard <keithp@keithp.com>