| 2024-02-13 |
Bdale Garbee | shove copper to make laser-safe, drop 'p2' in silk...
|
commit | commitdiff | tree |
| 2024-02-13 |
Bdale Garbee | switch to the same LDO used on EasyMini, it's much...
|
commit | commitdiff | tree |
| 2024-02-13 |
Bdale Garbee | actually connect the gnd side of the bulk capacitor...
|
commit | commitdiff | tree |
| 2024-02-01 |
Bdale Garbee | rationalize 22uF capacitor choice to pref parts, clean...
|
commit | commitdiff | tree |
| 2023-03-16 |
Bdale Garbee | be explicit about 5V pin on USB connector being a no...
|
commit | commitdiff | tree |
| 2023-03-16 |
Bdale Garbee | declare p2 in the silk, tweak copper to improve DRC...
|
commit | commitdiff | tree |
| 2023-03-06 |
Bdale Garbee | route complete and drc clean-ish after reducing vias...
|
commit | commitdiff | tree |
| 2023-03-05 |
Bdale Garbee | eliminate vias under chips with bottom copper
|
commit | commitdiff | tree |
| 2023-03-04 |
Bdale Garbee | snapshot before working on under-samd21 vias
|
commit | commitdiff | tree |
| 2023-03-04 |
Bdale Garbee | add explicit NC symbols on schematic, 'p1' in silk...
|
commit | commitdiff | tree |
| 2023-03-03 |
Bdale Garbee | route complete, could use copper tweaking
|
commit | commitdiff | tree |
| 2023-02-23 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2023-02-21 |
Bdale Garbee | working on layout .. much left to do
|
commit | commitdiff | tree |
| 2023-02-07 |
Bdale Garbee | first cut at pulling v2 parts together
|
commit | commitdiff | tree |
| 2022-12-07 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2022-11-07 |
Bdale Garbee | forward annotate additional bypass caps, etc, to incomplete...
|
commit | commitdiff | tree |
| 2022-11-07 |
Bdale Garbee | add bypass caps for 3.3V rail, and fix VDDCORE connection
|
commit | commitdiff | tree |
| 2022-09-30 |
Bdale Garbee | work in process
|
commit | commitdiff | tree |
| 2022-07-03 |
Bdale Garbee | use IMU parts we can actually get
|
commit | commitdiff | tree |
| 2022-07-03 |
Bdale Garbee | add smaller logo, adjust debug connector and beeper...
|
commit | commitdiff | tree |
| 2022-07-03 |
Bdale Garbee | remove large logo from silk, etc
|
commit | commitdiff | tree |
| 2022-06-18 |
Bdale Garbee | switch cpu to SAMD21 parts we have in stock
|
commit | commitdiff | tree |
| 2022-06-18 |
Bdale Garbee | add flash part from TeleMini to schematic
|
commit | commitdiff | tree |
| 2020-10-30 |
Bdale Garbee | fix corner of outline polygon to have lines actually...
|
commit | commitdiff | tree |
| 2020-09-19 |
Bdale Garbee | bulk cap in LDO circuit is actually a 1206
|
commit | commitdiff | tree |
| 2020-09-18 |
Bdale Garbee | rationalize screw terminal strip values in pref parts
|
commit | commitdiff | tree |
| 2020-05-28 |
Bdale Garbee | forward annotate attributes cleanup
|
commit | commitdiff | tree |
| 2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
| 2020-05-04 |
Bdale Garbee | mark all through-hole parts as noload
|
commit | commitdiff | tree |
| 2020-04-10 |
Bdale Garbee | eliminate duplicate footprint attribute, which fortunately...
|
commit | commitdiff | tree |
| 2020-01-10 |
Bdale Garbee | update EasyTimer for 2020 copyright and add slots for...
|
commit | commitdiff | tree |
| 2019-11-13 |
Bdale Garbee | circuit complete, layout passes DRC
|
commit | commitdiff | tree |
| 2019-11-13 |
Bdale Garbee | route nearly complete, just bypass caps left to place
|
commit | commitdiff | tree |
| 2019-11-13 |
Bdale Garbee | move to BMX160 IMU
|
commit | commitdiff | tree |
| 2019-10-31 |
Bdale Garbee | change schematic to say 'v1' to match artwork .. single...
|
commit | commitdiff | tree |
| 2019-10-31 |
Bdale Garbee | switch to the same cpu variant at TeleMetrum, a bit...
|
commit | commitdiff | tree |
| 2019-08-06 |
Bdale Garbee | move to STM32L151 to have enough flash and EEPROM so...
|
commit | commitdiff | tree |
| 2019-08-06 |
Bdale Garbee | initial capture of a potential EasyTimer design
|
commit | commitdiff | tree |
|
projects / hw / easytimer / search