projects / hw / easymini / search
? search:
summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next
Add NC for the USB 'ground' pin in schematic
2024-02-13 Keith PackardAdd NC for the USB 'ground' pin in schematic
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2024-02-13 Keith PackardRevert "a few passive spacing improvements and copper...
commit | commitdiff | tree
2021-02-04 Keith PackardUpdate PCB with new 4screws part name
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2021-02-04 Keith PackardForce mfg_part_number for screws to use Seeed-compatible...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2021-02-04 Keith Packardupdate pcb part numbers for U4 and J1
 commit | commitdiff | tree
2019-09-26 Keith PackardSwitch to 11071 USB connector with tabs
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2019-07-27 Keith PackardSwitch pyro series resistors to 1k
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-07-05 Keith PackardMove MS5607 power trace away from screw keep-out circle
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-05-02 Keith PackardHook debug pin 5 to USART TX for telem output
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-04-25 Keith PackardMark debug connector as noload
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-02-23 Keith PackardMove traces away from hole keep-out circles
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-02-23 Keith PackardMerge remote-tracking branch 'origin/master'
 commit | commitdiff | tree
2017-02-23 Keith PackardOops. Left the 'force bootloader' pin off of the debug...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2017-02-22 Keith PackardReplace SoC with STM32F042
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-11-13 Keith PackardReplace W25Q80BV with W25Q80DV
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-11-13 Keith PackardMerge branch 'master' into fixup
 commit | commitdiff | tree
2015-11-13 Keith PackardWith top silk fixed to make it "nicer" looking, go...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-11-13 Keith PackardMove refdes on silk to be usable
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-10-03 Keith PackardWith top silk fixed to make it "nicer" looking, go...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-10-03 Keith PackardAdd partslist-check.dk target
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-10-03 Keith PackardMove refdes on silk to be usable
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2015-10-03 Keith PackardAdd mfg_part_number column
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2014-02-21 Keith PackardSwap flash part to arrow for stock
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2014-02-05 Keith PackardMerge remote-tracking branch 'origin/master'
 commit | commitdiff | tree
2014-02-05 Keith PackardClean up ground plane, flip debug connector, move passives...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2014-01-22 Keith PackardRename partslist.csv to easymini-bom.csv
 commit | commitdiff | tree
2014-01-20 Keith PackardUse 4ucon USB connector
 commit | commitdiff | tree
2013-12-02 Keith PackardSwap 2.2uF LDO output cap for 4.7uF
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-12-02 Keith PackardSilk cleanups
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-09-19 Keith PackardChange LDO to 3.3V. Fix xtal loading caps.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-09-09 Keith PackardChange to v1.0. Add silk block for serial.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-06-24 Keith PackardConnect USB pull-up to GPIO PI0_20
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-06-21 Keith PackardReplace the regulator with a 3.0V LD2980. Reduce igniter...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-05-20 Keith PackardMove pyro firing pins away from the I2C lines
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-05-06 Keith PackardRotate ballast cap around so GND faces the mounting...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-04-30 Keith PackardAdd DK part numbers for remaining resistors
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-04-22 Keith PackardSlide 'EasyMini' label over a bit
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-23 Keith PackardAdd (optional) LiPo battery connector. Unrouted.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-22 Keith PackardUpdate PCB to reflect the LPC11U14 part number change
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-22 Keith PackardSwitch LPC11U4 from 7x7mm package to 5x5mm package
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-20 Keith PackardShuffle refdes around on the PCB
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-20 Keith PackardFix C8 VIA thermal. Shuffle LDO N a bit
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-20 Keith PackardSwitch crystal to 12MHz ABM8G
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-18 Keith PackardClean up mask violations in LPC11U14 footprint. Hide...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-18 Keith PackardAdd vendor part numbers to everything
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-18 Keith PackardSwap screw terminals around to place main/apogee aft
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardFixup ground plane
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardAdd debug connector
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardAdd text to back of board
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardAdd serial and debug connectors
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardRe-route power to the MS5607
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardRoute complete
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-17 Keith PackardInitial EasyMetrum schematic and board
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
dual deployment flight computer