Switch pyro series resistors to 1k

This limits the current through the comparator to 3.3mA when it fires
to make sure the gate voltage on the FET is low enough.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/attribs b/attribs
index d7af178679184d8c3bf877499266e2bdbee31cb5..5703a576232d1b31c34354ce07478768bdf15af9 100644 (file)
--- a/attribs
+++ b/attribs
@@ -3,6 +3,7 @@ value
 footprint
 loadstatus
 provided
+mfg
 mfg_part_number
 vendor
 vendor_part_number

diff --git a/easymini.pcb b/easymini.pcb
index 2e54b9374dfb83422de01e14799fea5dbeff2069..8d4def22856cafab704eedb74930057989d26b60 100644 (file)
--- a/easymini.pcb
+++ b/easymini.pcb
@@ -968,14 +968,14 @@ Element["" "0402" "R4" "3.3k" 632.00mil 9.0612mm 63.00mil -0.6538mm 3 80 ""]
 
        )
 
-Element["" "0402" "R5" "100" 14.5730mm 354.00mil -0.8316mm -60.00mil 0 80 ""]
+Element["" "0402" "R5" "1k" 14.5730mm 354.00mil -0.8316mm -60.00mil 0 80 ""]
 (
        Pad[15.74mil -3.93mil 15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "1" "1" "square"]
        Pad[-15.74mil -3.93mil -15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "2" "2" "square"]
 
        )
 
-Element["" "0402" "R2" "100" 14.5730mm 419.00mil -0.8316mm 15.00mil 0 80 ""]
+Element["" "0402" "R2" "1k" 14.5730mm 419.00mil -0.8316mm 15.00mil 0 80 ""]
 (
        Pad[15.74mil -3.93mil 15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "1" "1" "square"]
        Pad[-15.74mil -3.93mil -15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "2" "2" "square"]

diff --git a/easymini.sch b/easymini.sch
index 7052b0af36fb92f91ff3c9df9812294fee1fb633..3e5175df34751d3bfe69f337b8893e3d7f35db8e 100644 (file)
--- a/easymini.sch
+++ b/easymini.sch
@@ -66,7 +66,7 @@ footprint=0402
 T 38100 28000 5 10 1 1 180 0 1
 refdes=R2
 T 38500 28000 5 10 1 1 180 0 1
-value=100
+value=1k
 }
 C 37700 23900 1 0 0 resistor.sym
 {
@@ -77,7 +77,7 @@ footprint=0402
 T 38100 24300 5 10 1 1 180 0 1
 refdes=R5
 T 38500 24300 5 10 1 1 180 0 1
-value=100
+value=1k
 }
 N 38600 27700 39200 27700 4
 N 38600 24000 39200 24000 4