Add (optional) LiPo battery connector. Unrouted.

We can load this to make using a standard AM lipo battery easier.
Just stuck it somewhere on the board to make sure the footprint was right

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/easymetrum.pcb b/easymetrum.pcb
index e0df54cf6f3c37b035e00a7a7aed0fbbb02c9559..ace698e6767db725f83fd925d3207eb2c9255944 100644 (file)
--- a/easymetrum.pcb
+++ b/easymetrum.pcb
@@ -6,11 +6,11 @@ FileVersion[20091103]
 PCB["EasyMetrum" 1500.00mil 800.00mil]
 
 Grid[100.000000 0.0000 0.0000 0]
-Cursor[8.00mil 47.00mil 0.000000]
+Cursor[7.00mil 798.00mil 0.000000]
 PolyArea[200000000.000000]
 Thermal[0.500000]
 DRC[6.00mil 10.00mil 6.00mil 5.00mil 10.00mil 7.00mil]
-Flags("showdrc,nameonpcb,clearnew,snappin,liveroute")
+Flags("showdrc,nameonpcb,clearnew,liveroute")
 Groups("1,c:2,s:3")
 Styles["Signal,10.00mil,31.00mil,15.00mil,6.00mil:Power,25.00mil,60.00mil,35.00mil,10.00mil:Fat,40.00mil,60.00mil,35.00mil,10.00mil:Skinny,15.00mil,24.02mil,11.81mil,6.00mil"]
 
@@ -1322,6 +1322,19 @@ Element["" "8ufson2x2" "U5" "LM293" 578.00mil 654.00mil 2.00mil 39.00mil 0 100 "
        ElementLine [-39.37mil -51.18mil -39.37mil -51.18mil 10.00mil]
 
        )
+
+Element["onsolder" "B2B-PH" "B1" "LiPo" 9.00mil 354.00mil 0.0000 0.0000 0 100 "auto"]
+(
+       Pin[76.77mil -2.8001mm 51.18mil 12.01mil 57.48mil 29.53mil "pin2" "2" "edge2"]
+       Pin[155.51mil -2.8001mm 51.18mil 12.01mil 57.48mil 29.53mil "pin1" "1" "square,edge2"]
+       ElementLine [0.0000 0.0000 0.0000 -177.17mil 6.00mil]
+       ElementLine [0.0000 -177.17mil 232.28mil -177.17mil 6.00mil]
+       ElementLine [232.28mil -177.17mil 232.28mil 0.0000 6.00mil]
+       ElementLine [232.28mil 0.0000 0.0000 0.0000 6.00mil]
+
+       )
+Rat[85.77mil 6.1915mm 1 6.5266mm 790.00mil 1  "via"]
+Rat[164.51mil 6.1915mm 1 525.00mil 530.00mil 1  ""]
 Layer(1 "top")
 (
        Line[865.79mil 12.7850mm 865.79mil 522.21mil 10.00mil 20.00mil "clearline"]
@@ -1772,7 +1785,7 @@ Layer(4 "silk")
        Text[550.00mil 640.00mil 2 200 "+" "clearline,onsolder"]
        Text[19.7543mm 772.39mil 0 150 "EasyMetrum" "clearline,onsolder"]
        Text[21.9509mm 666.39mil 0 100 "v0.1" "clearline,onsolder"]
-       Text[73.73mil 14.8718mm 3 90 "& Bdale Garbee" "clearline,onsolder"]
+       Text[74.00mil 586.00mil 3 90 "& Bdale Garbee" "clearline,onsolder"]
        Text[137.00mil 14.2871mm 3 90 "Keith Packard" "clearline,onsolder"]
        Text[199.20mil 12.7377mm 3 90 "` 2013" "clearline,onsolder"]
        Text[476.00mil 792.00mil 0 100 "Battery" "clearline,onsolder"]
@@ -1867,6 +1880,7 @@ NetList()
        )
        Net("GND" "(unknown)")
        (
+               Connect("B1-2")
                Connect("C2-2")
                Connect("C3-2")
                Connect("C4-1")
@@ -2068,6 +2082,7 @@ NetList()
        )
        Net("unnamed_net20" "(unknown)")
        (
+               Connect("B1-1")
                Connect("J2-3")
                Connect("J3-1")
        )

diff --git a/easymetrum.sch b/easymetrum.sch
index 084b5d69b64a945246317009967fc49b483cc78a..b0a2d01815d8a97986f1de3b9bafdee9bd6bd598 100644 (file)
--- a/easymetrum.sch
+++ b/easymetrum.sch
@@ -1190,3 +1190,28 @@ T 25800 10500 9 10 1 0 0 0 1
 easymetrum.sch
 T 25800 10200 9 10 1 0 0 0 1
 http://altusmetrum.org/EasyMetrum
+C 17300 15100 1 270 0 battery.sym
+{
+T 18200 14800 5 10 0 1 270 0 1
+device=CONNECTOR
+T 17800 15000 5 10 1 1 0 0 1
+refdes=B1
+T 18600 14800 5 10 0 0 270 0 1
+symversion=0.1
+T 17800 14600 5 10 1 1 0 0 1
+value=LiPo
+T 17300 15100 5 10 0 0 0 0 1
+footprint=B2B-PH
+T 17300 15100 5 10 0 0 0 0 1
+vendor_part_number=A100034-ND
+T 17300 15100 5 10 0 0 0 0 1
+loadstatus=throughhole
+T 17300 15100 5 10 0 0 0 0 1
+vendor=digikey
+T 17300 15100 5 10 0 1 0 0 1
+device=CONNECTOR
+}
+N 14500 15100 14500 15500 4
+N 14500 15500 17500 15500 4
+N 17500 15500 17500 15100 4
+C 17400 14100 1 0 0 gnd.sym