2013-05-20 |
Keith Packard | altos: Add EXTI_PIN_NOCONFIGURE to exti interface,... |
commit | commitdiff | tree | snapshot |
2013-05-20 |
Keith Packard | altos/lpc: Make EXTI code work. |
commit | commitdiff | tree | snapshot |
2013-05-20 |
Keith Packard | altos: Use ao_spi_get/put_bit in MS5607 driver |
commit | commitdiff | tree | snapshot |
2013-05-20 |
Keith Packard | altos/attiny: Fix ao_spi_get_bit/ao_spi_put_bit macros |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: ignore built files in easymini-v0.1 |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Build easymini-v0.1 |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Initialize SPI for easymini |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Stick USB control structure in USB memory |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Add easymini-v0.1 product |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Use separate interrupt stack |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Try a smaller stack. |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Add pin interrupt driver |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Add beep driver |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Add ADC driver |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: add gpio int, spi, adc and ct32b defines... |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Clean up broken IOCONF defines |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos/lpc: Fix ao_enable_input, add ao_enable_analog |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: LPC interrupt priorities are just 0-3 |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Add LPC spi driver |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Use ao_port_t in m25 driver |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Use ao_data_pres macro in ao_log_tiny |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Check for packet mode before trying to disable... |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: ao_data_get is in ao_data.c now, not ao_adc.c |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Allow architecture to define the type of port... |
commit | commitdiff | tree | snapshot |
2013-05-18 |
Keith Packard | altos: Move ao_data.c from stm to core |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Get USB working |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos: Allow target-specific USB endpoint specifications |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos: Finish off LPC USB register definitions |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Start adding USB register defines |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Start adding USB register definitions |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Take advantage of USART TX fifo |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Get USART running |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/lpc: Get 100Hz timer running |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | lpcxpresso: Add ao_demo.c |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | lpc: Initial lpcxpresso bits |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | libaltos: use PurgeComm in Windows altos_close to abort... |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | libaltos: Build the linux library targets when doing... |
commit | commitdiff | tree | snapshot |
2013-05-17 |
Keith Packard | altos/cc1111: Hack on USB driver to make Windows happy |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Generate unmodulated carrier for CC1120 test... |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Move MS5607 info from 'v' to 'c s' |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Remove some MMA655x debugging printfs |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Grab SPI mutex until MPU6000 I2C mode is disabled |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Initialize MPU6000 CS pin for SPI mode |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Fix telemega v0.3 igniter order (drogue/main... |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: gps serial routines are called ao_gps_*, not... |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Give u-blox 3 seconds after boot before we bug it |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Keith Packard | altos: Add 'g' command to ublox GPS code. |
commit | commitdiff | tree | snapshot |
2013-05-15 |
Keith Packard | altos: Add flash-loader for telescience-v0.2 |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Set u-blox navigation settings |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Use symbolic names for ublox packet id |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altosui: Generate useful KML files from TeleGPS logs |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altosui: Use GPS alt + baro height for KML altitude |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altoslib: Use sequence numbers to track GPS updates... |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos/test: ao_gps_test_ublox uses ao_gps_blox.h |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Struct used for u-blox testing had lat/lon swapped |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Switch TeleMega v0.3 to u-blox |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Provide a define for the number of sat infos... |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Add U-Blox GPS driver |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altos: Don't bother fixing telelco-v0.1, just disable it |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altosuilib: Mistake in the MegaDongle listing -- was... |
commit | commitdiff | tree | snapshot |
2013-05-14 |
Keith Packard | altoslib: Correct hexfile address ranges |
commit | commitdiff | tree | snapshot |
2013-05-11 |
Keith Packard | altosui: Wait for valid callsign/flight when graphing |
commit | commitdiff | tree | snapshot |
2013-05-10 |
Keith Packard | Merge branch 'master-fixes' into stm-flash-fixes |
commit | commitdiff | tree | snapshot |
2013-05-10 |
Keith Packard | micropeak: Use new 'last logdir' preference for MicroPe... |
commit | commitdiff | tree | snapshot |
2013-05-10 |
Keith Packard | Information from configure about android build was... |
commit | commitdiff | tree | snapshot |
2013-05-10 |
Keith Packard | altoslib: Add non-persistent 'last logdir' preference |
commit | commitdiff | tree | snapshot |
2013-05-10 |
Keith Packard | Add altosdroid notebook entry for imperial units |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Wait after configuring boot pin before testing it |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Create per-product flash loaders |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Add ao_boot_chain to telemega v0.3 |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools/ao-stmload: Add --verbose flag |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Remove stdio from stm-flash |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Get rodata into flash, make sure sections are... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Make stm-bringup build again |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Run self loader when application sets boot addr... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Allow STM usb driver to be used without stdio |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm-flash: Check target flash address against... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools/ao-stmload: application base moved to 0x08001000 |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools: reboot to loader now uses 'X' instead of 'L' |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Use flash loader on all STM products |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Provide another 4kB of flash space for apps |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Shrink stm flash loader to < 4kB |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Allow core timer to be excluded from build |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Don't define task macros when not tasking |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Eliminate stdio looping when system has a single... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Move ao_notask to core |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools/ao-stmload: Remove IRC dregs in source code |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altosui/altoslib: Move more flashing code from altosui... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altosui & altoslib: Move a pile of debug/programming... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altosui: Support 32-bit ihx files |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools/ao-stmload: Fix ELF, add IHX, add self-flashing |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | ao-tools/lib: Add loading support for 32-bit ihx files |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Add comments to the .ld files explaining... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos/stm: Add .elf to .ihx rule |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Switch ao_stm_flash to read/write binary blocks |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Create ihx version of stm-demo |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Add erase command to stm-flash app. Validate... |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Fix STM flash programming |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Validate boot chain start address |
commit | commitdiff | tree | snapshot |
2013-05-08 |
Keith Packard | altos: Mark .boot section as (NOLOAD) |
commit | commitdiff | tree | snapshot |
next |