altos: Use ao_port_t in m25 driver

This uses ao_port_t for all of the chip select masks

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/src/drivers/ao_m25.c b/src/drivers/ao_m25.c
index 390637d7fd116b5c39889b4ed65df295d6d6e1b5..9b768012a06b03b633fccb45f9b3b3fa9742422e 100644 (file)
--- a/src/drivers/ao_m25.c
+++ b/src/drivers/ao_m25.c
@@ -82,7 +82,7 @@ __pdata uint16_t      ao_storage_unit;
 
 #if M25_MAX_CHIPS > 1
 static uint8_t ao_m25_size[M25_MAX_CHIPS];     /* number of sectors in each chip */
-static uint8_t ao_m25_pin[M25_MAX_CHIPS];      /* chip select pin for each chip */
+static ao_port_t ao_m25_pin[M25_MAX_CHIPS];    /* chip select pin for each chip */
 static uint8_t ao_m25_numchips;                        /* number of chips detected */
 #endif
 static uint8_t ao_m25_total;                   /* total sectors available */
@@ -112,7 +112,7 @@ static __xdata uint8_t      ao_m25_instruction[4];
  * Block until the specified chip is done writing
  */
 static void
-ao_m25_wait_wip(uint8_t cs)
+ao_m25_wait_wip(ao_port_t cs)
 {
        if (ao_m25_wip & cs) {
                M25_SELECT(cs);
@@ -132,7 +132,7 @@ ao_m25_wait_wip(uint8_t cs)
  * so that future operations will block until the WIP bit goes off
  */
 static void
-ao_m25_write_enable(uint8_t cs)
+ao_m25_write_enable(ao_port_t cs)
 {
        M25_SELECT(cs);
        ao_m25_instruction[0] = M25_WREN;
@@ -146,7 +146,7 @@ ao_m25_write_enable(uint8_t cs)
  * Returns the number of 64kB sectors
  */
 static uint8_t
-ao_m25_read_capacity(uint8_t cs)
+ao_m25_read_capacity(ao_port_t cs)
 {
        uint8_t capacity;
        M25_SELECT(cs);
@@ -166,12 +166,13 @@ ao_m25_read_capacity(uint8_t cs)
        return 1 << (capacity - 0x10);
 }
 
-static uint8_t
+static ao_port_t
 ao_m25_set_address(uint32_t pos)
 {
-       uint8_t chip;
+       ao_port_t       mask;
 #if M25_MAX_CHIPS > 1
        uint8_t size;
+       uint8_t         chip;
 
        for (chip = 0; chip < ao_m25_numchips; chip++) {
                size = ao_m25_size[chip];
@@ -182,16 +183,16 @@ ao_m25_set_address(uint32_t pos)
        if (chip == ao_m25_numchips)
                return 0xff;
 
-       chip = ao_m25_pin[chip];
+       mask = ao_m25_pin[chip];
 #else
-       chip = AO_M25_SPI_CS_MASK;
+       mask = AO_M25_SPI_CS_MASK;
 #endif
-       ao_m25_wait_wip(chip);
+       ao_m25_wait_wip(mask);
 
        ao_m25_instruction[1] = pos >> 16;
        ao_m25_instruction[2] = pos >> 8;
        ao_m25_instruction[3] = pos;
-       return chip;
+       return mask;
 }
 
 /*
@@ -239,7 +240,7 @@ ao_m25_scan(void)
 uint8_t
 ao_storage_erase(uint32_t pos) __reentrant
 {
-       uint8_t cs;
+       ao_port_t       cs;
 
        if (pos >= ao_storage_total || pos + ao_storage_block > ao_storage_total)
                return 0;
@@ -268,7 +269,7 @@ ao_storage_erase(uint32_t pos) __reentrant
 uint8_t
 ao_storage_device_write(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
 {
-       uint8_t cs;
+       ao_port_t       cs;
 
        if (pos >= ao_storage_total || pos + len > ao_storage_total)
                return 0;
@@ -295,7 +296,7 @@ ao_storage_device_write(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
 uint8_t
 ao_storage_device_read(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
 {
-       uint8_t cs;
+       ao_port_t       cs;
 
        if (pos >= ao_storage_total || pos + len > ao_storage_total)
                return 0;
@@ -332,7 +333,7 @@ void
 ao_storage_device_info(void) __reentrant
 {
 #if M25_DEBUG
-       uint8_t cs;
+       ao_port_t       cs;
 #endif
 #if M25_MAX_CHIPS > 1
        uint8_t chip;