2009-05-17 |
Keith Packard | Add pad lat/lon, max accel, max height |
commit | commitdiff | tree | snapshot |
2009-05-17 |
Keith Packard | Clean up GPS display |
commit | commitdiff | tree | snapshot |
2009-05-17 |
Keith Packard | Make aoview window taller |
commit | commitdiff | tree | snapshot |
2009-05-17 |
Keith Packard | Add lots more aoview UI bits |
commit | commitdiff | tree | snapshot |
2009-05-17 |
Keith Packard | When logging starts up, right the whole ring to the... |
commit | commitdiff | tree | snapshot |
2009-05-17 |
Keith Packard | Abandon use of accelerometer for apogee detect. |
commit | commitdiff | tree | snapshot |
2009-05-16 |
Keith Packard | Add preliminary aoview code sn4-flight1 sn4-flight2 |
commit | commitdiff | tree | snapshot |
2009-05-14 |
Keith Packard | Discard usb output before connection. Handle USB reset. 0.2 |
commit | commitdiff | tree | snapshot |
2009-05-14 |
Keith Packard | Enable radio monitor by default in teleterra, teledongl... |
commit | commitdiff | tree | snapshot |
2009-05-14 |
Keith Packard | Remove monitor/rssi functions from telemetrum load |
commit | commitdiff | tree | snapshot |
2009-05-14 |
Keith Packard | Split out ao_state_names to separate file |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Indicate RSSI with a blinking LED |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Make ao_flight_test show AGL altitude and positive... |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Make ao_flight_test able to read raw logging data |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Print only RSSI when packet CRC is invalid |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Accelerometer-based velocity values are invalid after... |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Add velocity check for boost detect via accelerometer |
commit | commitdiff | tree | snapshot |
2009-05-13 |
Keith Packard | Typo in callsign |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Use recorded accelerometer baseline data in ao_flight_test |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Don't re-initialize the landing range data at each... |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Initialize ao_min_vel with |ao_flight_vel| |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Decrease telemetry rate on the pad to 1/sec instead... |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Increase the initial accel/baro average to 1000 samples |
commit | commitdiff | tree | snapshot |
2009-05-11 |
Keith Packard | Record average accelerometer value in flight start... |
commit | commitdiff | tree | snapshot |
2009-05-09 |
Keith Packard | Add version command to show product information |
commit | commitdiff | tree | snapshot |
2009-05-09 |
Keith Packard | Pad callsign with nuls |
commit | commitdiff | tree | snapshot |
2009-05-01 |
Keith Packard | USB spec limits bulk endpoints to 64 byte payload max. |
commit | commitdiff | tree | snapshot |
2009-04-30 |
Keith Packard | Use 'char' instead of 'uint8_t' for character data |
commit | commitdiff | tree | snapshot |
2009-04-30 |
Keith Packard | Eliminate incorrect cast in printf string argument |
commit | commitdiff | tree | snapshot |
2009-04-30 |
Keith Packard | Correct radio frequency shown in config display. |
commit | commitdiff | tree | snapshot |
2009-04-30 |
Keith Packard | Reset landing interval tests at apogee |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Bdale Garbee | clean up host programs, too |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Was missing v_batt in adc dump command 0.1 |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Add manual ignition and igniter test commands |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Clean up commands a bit |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Clear more files on make clean |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Label binaries with product and serial info |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Make sure full log is written and flushed on landing. |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Clean up monitor output a bit |
commit | commitdiff | tree | snapshot |
2009-04-26 |
Keith Packard | Add configuration support |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Allow for slower ADC operation. Add power saving code. |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Allow ADC to be disabled |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Place CPU in P0 state while idle |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Add RDF beacon and callsign to telemetry |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Add radio code to emit a 1kHz tone |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Allow the USB system to be disabled/enabled at run... |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Make LED usage depend on target device |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Make some functions reentrant to save DSEG space |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Add monitor task to flight software |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Report difference from ground to max altitude at landing |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Display data with units while running simulation |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Enabling apogee detect via speed: < 200m/s && < max_spe... |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | configure igniter ports, set values to measured ones |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Move ao_led_init to end of file to be consistent with... |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Define ao_state_names in ao.h so other people can share |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Bump NUM_CMDS to 10 |
commit | commitdiff | tree | snapshot |
2009-04-25 |
Keith Packard | Move beep_init to end of file to be consistent with... |
commit | commitdiff | tree | snapshot |
2009-04-24 |
Keith Packard | Update flight algorithm based on data collected from... |
commit | commitdiff | tree | snapshot |
2009-04-24 |
Keith Packard | Add igniters and update flight control algorithm |
commit | commitdiff | tree | snapshot |
2009-04-24 |
Keith Packard | Avoid ram from 0xfda2 through feff, its funky |
commit | commitdiff | tree | snapshot |
2009-04-24 |
Keith Packard | remove ao_flight_test until its ready |
commit | commitdiff | tree | snapshot |
2009-04-24 |
Keith Packard | Add teledongle module |
commit | commitdiff | tree | snapshot |
2009-04-23 |
Keith Packard | Set telemetry rate to 100ms |
commit | commitdiff | tree | snapshot |
2009-04-23 |
Keith Packard | Wrong license on ao_monitor.c |
commit | commitdiff | tree | snapshot |
2009-04-23 |
Keith Packard | Crank up radio to 10dBm |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Add COPYING file |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Clean up TeleTerra files |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | simplify ao_time function |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | One line radio status |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Add new binaries to .gitignore |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Speed up dbg port bit frobbing |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Use sdcc from path |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Clean up task list formatting |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Control radio monitoring with the M command |
commit | commitdiff | tree | snapshot |
2009-04-22 |
Keith Packard | Shrink USB output buffers, work around USB packet errors |
commit | commitdiff | tree | snapshot |
2009-04-21 |
Keith Packard | Clean up telemetry now that all packets are the same |
commit | commitdiff | tree | snapshot |
2009-04-21 |
Keith Packard | Add longer debug delays to reset/debug_mode entry |
commit | commitdiff | tree | snapshot |
2009-04-21 |
Keith Packard | Fix up fancy dbg stuff. Add teleterra initial bits. |
commit | commitdiff | tree | snapshot |
2009-04-21 |
Keith Packard | Add radio support. Build separate executables for TeleM... |
commit | commitdiff | tree | snapshot |
2009-04-19 |
Keith Packard | Start using pdata area for less-frequently used data sn1-flight1 |
commit | commitdiff | tree | snapshot |
2009-04-19 |
Keith Packard | Slow down panic presentation |
commit | commitdiff | tree | snapshot |
2009-04-19 |
Keith Packard | Parse GPS data locally. Add 'g' command to display... |
commit | commitdiff | tree | snapshot |
2009-04-19 |
Keith Packard | Add task names and 'T' command to show task status. |
commit | commitdiff | tree | snapshot |
2009-04-19 |
Keith Packard | Fix GPL version at 2 |
commit | commitdiff | tree | snapshot |
2009-04-18 |
Keith Packard | Add gps, debug dongle support and pressure alt tables |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Enable FEC in radio packets |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Add CRC to radio packets |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Add data whitening |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Add packet status byte defines |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Add separate xmit/recv programs to radio demo |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Get env var for debug method selection |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Run-time selection between cp2103 and cc1111 |
commit | commitdiff | tree | snapshot |
2009-04-17 |
Keith Packard | Send data |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Move a bunch of variables from __data to __xdata |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Slow down panic code, disable interrupts |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Keep reporting flight state while it changes |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | use red LED to indicate system startup |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Use ao_ee_flush_internal while holding mutex |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Leave beeping and lights to the flight code |
commit | commitdiff | tree | snapshot |
2009-04-15 |
Keith Packard | Make mutex functions reentrant |
commit | commitdiff | tree | snapshot |
next |