2013-05-27 |
Keith Packard | altos: Make manual pyro firing command work again |
tree | commitdiff |
2013-05-27 |
Keith Packard | altos: write pyro fired to correct log field |
tree | commitdiff |
2013-05-27 |
Keith Packard | altos: Light pyro charges simultaneously if so configured |
tree | commitdiff |
2013-05-27 |
Keith Packard | altos,altosui: Add pyro state logging for TeleMega |
tree | commitdiff |
2013-05-27 |
Keith Packard | altos: Add pyro code testing to ao_flight_test for... |
tree | commitdiff |
2013-05-21 |
Keith Packard | Separate out cortex-m0 compiler tests in configure |
tree | commitdiff |
2013-05-21 |
Keith Packard | altos: Can't use inline functions because SDCC doesn... |
tree | commitdiff |
2013-05-21 |
Keith Packard | Merge branch 'lpc' |
tree | commitdiff |
2013-05-21 |
Keith Packard | altos: Set the path for the STM32L compiler explicitly |
tree | commitdiff |
2013-05-20 |
Keith Packard | Add Mini logging format. Use in EasyMini lpc |
tree | commitdiff |
2013-05-20 |
Keith Packard | Merge branch 'master' into lpc |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/easymini: Initialize beep and ADC. Declare use... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/easymini: Use different pins for igniter outputs |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/easymini: MS5607 chip select bits were defined... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/easymini: Easymini doesn't have USB connect or... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Force idle mode if USB gets an address durin... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Reset SPI device at startup time |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Configuring wrong pin for SPI1 MOSI |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Allow for alternate SPI SCLK0 pin usage |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Leave SPI enabled all the time |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Create TX/RX busy macros for SPI driver |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Fix beeper driver |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Missing parens around ao_gpio_set macro |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: SPI runs off main clock (48MHz), not sysclk... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Pull ADC data from the correct registers |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Don't use loader to place USB endpoint data... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos: Add EXTI_PIN_NOCONFIGURE to exti interface,... |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/lpc: Make EXTI code work. |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos: Use ao_spi_get/put_bit in MS5607 driver |
tree | commitdiff |
2013-05-20 |
Keith Packard | altos/attiny: Fix ao_spi_get_bit/ao_spi_put_bit macros |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: ignore built files in easymini-v0.1 |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Build easymini-v0.1 |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Initialize SPI for easymini |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Stick USB control structure in USB memory |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Add easymini-v0.1 product |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Use separate interrupt stack |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Try a smaller stack. |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Add pin interrupt driver |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Add beep driver |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Add ADC driver |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: add gpio int, spi, adc and ct32b defines... |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Clean up broken IOCONF defines |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos/lpc: Fix ao_enable_input, add ao_enable_analog |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: LPC interrupt priorities are just 0-3 |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Add LPC spi driver |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Use ao_port_t in m25 driver |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Use ao_data_pres macro in ao_log_tiny |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Check for packet mode before trying to disable... |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: ao_data_get is in ao_data.c now, not ao_adc.c |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Allow architecture to define the type of port... |
tree | commitdiff |
2013-05-18 |
Keith Packard | altos: Move ao_data.c from stm to core |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Get USB working |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos: Allow target-specific USB endpoint specifications |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos: Finish off LPC USB register definitions |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Start adding USB register defines |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Start adding USB register definitions |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Take advantage of USART TX fifo |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Get USART running |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/lpc: Get 100Hz timer running |
tree | commitdiff |
2013-05-17 |
Keith Packard | lpcxpresso: Add ao_demo.c |
tree | commitdiff |
2013-05-17 |
Keith Packard | lpc: Initial lpcxpresso bits |
tree | commitdiff |
2013-05-17 |
Keith Packard | altos/cc1111: Hack on USB driver to make Windows happy |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Generate unmodulated carrier for CC1120 test... |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Move MS5607 info from 'v' to 'c s' |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Remove some MMA655x debugging printfs |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Grab SPI mutex until MPU6000 I2C mode is disabled |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Initialize MPU6000 CS pin for SPI mode |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Fix telemega v0.3 igniter order (drogue/main... |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: gps serial routines are called ao_gps_*, not... |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Give u-blox 3 seconds after boot before we bug it |
tree | commitdiff |
2013-05-16 |
Keith Packard | altos: Add 'g' command to ublox GPS code. |
tree | commitdiff |
2013-05-15 |
Keith Packard | altos: Add flash-loader for telescience-v0.2 |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Set u-blox navigation settings |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Use symbolic names for ublox packet id |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos/test: ao_gps_test_ublox uses ao_gps_blox.h |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Struct used for u-blox testing had lat/lon swapped |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Switch TeleMega v0.3 to u-blox |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Provide a define for the number of sat infos... |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Add U-Blox GPS driver |
tree | commitdiff |
2013-05-14 |
Keith Packard | altos: Don't bother fixing telelco-v0.1, just disable it |
tree | commitdiff |
2013-05-10 |
Keith Packard | Merge branch 'master-fixes' into stm-flash-fixes |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Wait after configuring boot pin before testing it |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Create per-product flash loaders |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Add ao_boot_chain to telemega v0.3 |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Remove stdio from stm-flash |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Get rodata into flash, make sure sections are... |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Make stm-bringup build again |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Run self loader when application sets boot addr... |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Allow STM usb driver to be used without stdio |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm-flash: Check target flash address against... |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Use flash loader on all STM products |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Provide another 4kB of flash space for apps |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Shrink stm flash loader to < 4kB |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Allow core timer to be excluded from build |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Don't define task macros when not tasking |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Eliminate stdio looping when system has a single... |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Move ao_notask to core |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Add comments to the .ld files explaining... |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos/stm: Add .elf to .ihx rule |
tree | commitdiff |
2013-05-08 |
Keith Packard | altos: Switch ao_stm_flash to read/write binary blocks |
tree | commitdiff |
next |