git.gag.com Git - hw/telemega/search

2012-03-03	Bdale Garbee	improve silk legibility	commit \| commitdiff \| tree
2012-03-03	Bdale Garbee	drop to 16 pin longer connector	commit \| commitdiff \| tree
2012-03-03	Bdale Garbee	add interrupt line from radio to cpu	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	massive attribute update, particularly vendor part...	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	improve spacing on schematic	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	add .gitignore	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	bring work area down to match board outline, add outline...	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	moved baro sensor to ease routing with split SPI wiring,	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	schematic updated with CC1120 power pins connected...	commit \| commitdiff \| tree
2012-02-29	Bdale Garbee	gyro symbol and all related nets cleaned up per inputs...	commit \| commitdiff \| tree
2012-02-27	Bdale Garbee	fixes incorporated from Keith's STM32L151 pin by pin...	commit \| commitdiff \| tree
2012-02-27	Bdale Garbee	more data sheets	commit \| commitdiff \| tree
2012-02-27	Bdale Garbee	keithp's review showed VLCD belongs on VDDA, not VDD	commit \| commitdiff \| tree
2012-02-27	Bdale Garbee	keithp needs these	commit \| commitdiff \| tree
2012-02-23	Bdale Garbee	a few minor tweaks, most of the silk done now	commit \| commitdiff \| tree
2012-02-20	Bdale Garbee	route complete, drc clean	commit \| commitdiff \| tree
2012-02-17	Bdale Garbee	lose C281 in the UHF section .. our layout constraints...	commit \| commitdiff \| tree
2012-02-17	Bdale Garbee	don't try to ground the pad underneath high-g accel...	commit \| commitdiff \| tree
2012-02-17	Bdale Garbee	shorted!	commit \| commitdiff \| tree
2012-02-17	Bdale Garbee	added top layer ground plane polygons around SMA connector	commit \| commitdiff \| tree
2012-02-17	Bdale Garbee	notch moved, analog inputs to ARM for battery voltages...	commit \| commitdiff \| tree
2012-02-16	Bdale Garbee	snapshot before moving board edge notch for microUSB	commit \| commitdiff \| tree
2012-02-16	Bdale Garbee	snapshot before shortening board again	commit \| commitdiff \| tree
2012-02-14	Bdale Garbee	pcb notch for micro USB added	commit \| commitdiff \| tree
2012-02-14	Bdale Garbee	snapshot before adding microUSB cutout to pcb edge	commit \| commitdiff \| tree
2012-02-14	Bdale Garbee	more schematic work on flight from DEN to SFO	commit \| commitdiff \| tree
2012-02-09	Bdale Garbee	make through hole side a solid ground plane (on behalf...	commit \| commitdiff \| tree
2012-02-09	Bdale Garbee	snapshot after return from Brussels	commit \| commitdiff \| tree
2012-02-06	Bdale Garbee	more work on plane	commit \| commitdiff \| tree
2012-02-06	Bdale Garbee	working on the flight from BRU to IAD after FOSDEM	commit \| commitdiff \| tree
2011-12-01	Bdale Garbee	switch to dual LEDs for both battery charger and main...	commit \| commitdiff \| tree
2011-12-01	Bdale Garbee	filling in more of the schematic	commit \| commitdiff \| tree
2011-11-30	Bdale Garbee	notes about gps antenna choices, more futzing	commit \| commitdiff \| tree
2011-11-25	Bdale Garbee	added a lot of the passives around the RF section	commit \| commitdiff \| tree
2011-11-25	Bdale Garbee	capture initial work on MegaMetrum	commit \| commitdiff \| tree

hex-channel flight computer with telemetry

RSS Atom