change GPS DC bias inductor to 47nH to lower SRF so 17E patches work
[hw/telemega] / megametrum.pcb
2012-03-31 Bdale Garbeea couple attribute cleanups, label file for printing...
2012-03-10 Bdale Garbeemove cap around the corner to get more standoff clearance fab-v0.1
2012-03-10 Bdale Garbeemake it easier to attach sensing wires with another via
2012-03-10 Bdale Garbeeadd a current measuring resistor in the LDO output net
2012-03-06 Bdale Garbeeimprove copper around GPS antenna center pin
2012-03-06 Bdale Garbeemake ground thermals on screw terminals and battery...
2012-03-06 Bdale Garbeeforward-annotate R13 value change to pcb file
2012-03-03 Bdale Garbeeadd polarity indicators on lipo connector in silk
2012-03-03 Bdale Garbeeset nopaste on SMA pads, some copper shoving
2012-03-03 Bdale Garbeefix product name in the .pcb file, and hide all referen...
2012-03-03 Bdale Garbeefixes motivated by freedfm run
2012-03-03 Bdale Garbeeimprove silk legibility
2012-03-03 Bdale Garbeedrop to 16 pin longer connector
2012-03-03 Bdale Garbeeadd interrupt line from radio to cpu
2012-02-29 Bdale Garbeebring work area down to match board outline, add outlin...
2012-02-29 Bdale Garbeemoved baro sensor to ease routing with split SPI wiring,
2012-02-29 Bdale Garbeegyro symbol and all related nets cleaned up per inputs...
2012-02-27 Bdale Garbeefixes incorporated from Keith's STM32L151 pin by pin...
2012-02-27 Bdale Garbeekeithp's review showed VLCD belongs on VDDA, not VDD
2012-02-23 Bdale Garbeea few minor tweaks, most of the silk done now
2012-02-20 Bdale Garbeeroute complete, drc clean
2012-02-17 Bdale Garbeeshorted!
2012-02-17 Bdale Garbeeadded top layer ground plane polygons around SMA connector
2012-02-17 Bdale Garbeenotch moved, analog inputs to ARM for battery voltages...
2012-02-16 Bdale Garbeesnapshot before moving board edge notch for microUSB
2012-02-16 Bdale Garbeesnapshot before shortening board again
2012-02-14 Bdale Garbeepcb notch for micro USB added
2012-02-14 Bdale Garbeesnapshot before adding microUSB cutout to pcb edge
2012-02-09 Bdale Garbeemake through hole side a solid ground plane (on behalf...
2012-02-09 Bdale Garbeesnapshot after return from Brussels
2012-02-06 Bdale Garbeemore work on plane
2012-02-06 Bdale Garbeeworking on the flight from BRU to IAD after FOSDEM
2011-12-01 Bdale Garbeefilling in more of the schematic
2011-11-30 Bdale Garbeenotes about gps antenna choices, more futzing
2011-11-25 Bdale Garbeecapture initial work on MegaMetrum