projects / hw / telelco / search
? search:
summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next
Use tyco 6-pin header for all switches
2012-08-04 Keith PackardUse tyco 6-pin header for all switches
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-04 Keith Packardgerber files dependency was incorrect
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-04 Keith PackardFlush out partslist.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-04 Keith PackardFix makefile to build partslist with -j flag
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-03 Keith PackardPEC11 footprint was accidentally a clone of PEC11L
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-03 Keith PackardRe-route rotary switch connections
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-03 Keith PackardMove some silk around
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-03 Keith PackardAdd bypass caps to all STM32L power leads
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-08-03 Keith PackardAdd SPI snubbers.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-30 Keith Packardswitch to STM152LRBT6
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-24 Keith PackardAdd serial debug connector for cc1111
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-24 Keith PackardClean up pcb -- unthermal a couple vias, erase dirt
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-24 Keith PackardRoute complete with cc1111 radio again
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-23 Keith PackardSwitch back to the cc1111 for a radio
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-22 Keith PackardMove LEDs to back of board. Unthermal vias
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-16 Keith PackardAdd π filters on all links between CPU and CC1120
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-10 Keith PackardMove ink around
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-07-10 Keith PackardSwitch to CC1120 radio. Add reset controller
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-22 Keith PackardUse 64-pin STM32L processor. Shrink board to 4.5 x...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-13 Keith PackardAdd cap on vlcd line, disconnect vlcd from +3.3V
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-13 Keith PackardIgnore DRC on outline. Shift USB cutout to center on...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-13 Keith PackardAdd 22-ohm resistors to USB data lines
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardMove ink for serial number down under the license.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardUse all through-hole LEDs. Add mounting holes.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardNearly route complete with LCD and knobs on backside...
commit | commitdiff | tree
2012-06-09 Keith PackardAdd footprint for USB bare wires
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardReplace PEC11L rotary switch with PEC11 version
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardUpdate with battery charger, new STM debug etc
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-09 Keith PackardMove LCD and switches to back side of board
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-08 Keith PackardSwitch from PEC11L to PEC11 for rotary switch
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-07 Keith PackardShrink PCB to 4.5" x 4.5"
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-07 Keith PackardCreate PCB layout
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-07 Keith PackardAdd packages and set footprints
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-06-07 Keith PackardStart telelco work.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
lco end of wireless launch system