git.gag.com Git - hw/easymini/search

2024-02-13	Keith Packard	Move R15 label to avoid the USB pad Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2024-02-13	Keith Packard	Re-create bdale's resistor motion Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2024-02-13	Keith Packard	Add NC for the USB 'ground' pin in schematic Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2024-02-13	Keith Packard	Revert "a few passive spacing improvements and copper...	commit \| commitdiff \| tree
2021-02-04	Keith Packard	Update PCB with new 4screws part name Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2021-02-04	Keith Packard	Force mfg_part_number for screws to use Seeed-compatible... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2021-02-04	Keith Packard	update pcb part numbers for U4 and J1	commit \| commitdiff \| tree
2019-09-26	Keith Packard	Switch to 11071 USB connector with tabs Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2019-07-27	Keith Packard	Switch pyro series resistors to 1k Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-07-05	Keith Packard	Move MS5607 power trace away from screw keep-out circle Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-05-02	Keith Packard	Hook debug pin 5 to USART TX for telem output Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-04-25	Keith Packard	Mark debug connector as noload Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-02-23	Keith Packard	Move traces away from hole keep-out circles Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-02-23	Keith Packard	Merge remote-tracking branch 'origin/master'	commit \| commitdiff \| tree
2017-02-23	Keith Packard	Oops. Left the 'force bootloader' pin off of the debug... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2017-02-22	Keith Packard	Replace SoC with STM32F042 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-11-13	Keith Packard	Replace W25Q80BV with W25Q80DV Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-11-13	Keith Packard	Merge branch 'master' into fixup	commit \| commitdiff \| tree
2015-11-13	Keith Packard	With top silk fixed to make it "nicer" looking, go... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-11-13	Keith Packard	Move refdes on silk to be usable Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-10-03	Keith Packard	With top silk fixed to make it "nicer" looking, go... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-10-03	Keith Packard	Add partslist-check.dk target Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-10-03	Keith Packard	Move refdes on silk to be usable Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-10-03	Keith Packard	Add mfg_part_number column Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-02-21	Keith Packard	Swap flash part to arrow for stock Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-02-05	Keith Packard	Merge remote-tracking branch 'origin/master'	commit \| commitdiff \| tree
2014-02-05	Keith Packard	Clean up ground plane, flip debug connector, move passives... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-01-22	Keith Packard	Rename partslist.csv to easymini-bom.csv	commit \| commitdiff \| tree
2014-01-20	Keith Packard	Use 4ucon USB connector	commit \| commitdiff \| tree
2013-12-02	Keith Packard	Swap 2.2uF LDO output cap for 4.7uF Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-12-02	Keith Packard	Silk cleanups Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-09-19	Keith Packard	Change LDO to 3.3V. Fix xtal loading caps. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-09-09	Keith Packard	Change to v1.0. Add silk block for serial. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-06-24	Keith Packard	Connect USB pull-up to GPIO PI0_20 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-06-21	Keith Packard	Replace the regulator with a 3.0V LD2980. Reduce igniter... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-05-20	Keith Packard	Move pyro firing pins away from the I2C lines Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-05-06	Keith Packard	Rotate ballast cap around so GND faces the mounting... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-04-30	Keith Packard	Add DK part numbers for remaining resistors Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-04-22	Keith Packard	Slide 'EasyMini' label over a bit Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-23	Keith Packard	Add (optional) LiPo battery connector. Unrouted. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-22	Keith Packard	Update PCB to reflect the LPC11U14 part number change Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-22	Keith Packard	Switch LPC11U4 from 7x7mm package to 5x5mm package Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Shuffle refdes around on the PCB Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Fix C8 VIA thermal. Shuffle LDO N a bit Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Switch crystal to 12MHz ABM8G Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Clean up mask violations in LPC11U14 footprint. Hide... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Add vendor part numbers to everything Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Swap screw terminals around to place main/apogee aft Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Fixup ground plane Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add debug connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add text to back of board Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add serial and debug connectors Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Re-route power to the MS5607 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Route complete Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Initial EasyMetrum schematic and board Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

dual deployment flight computer

RSS Atom