fw/altos
9 years agoAltosTelemetryReader: actually open serial port
Anthony Towns [Sat, 13 Nov 2010 14:57:45 +0000 (00:57 +1000)]
AltosTelemetryReader: actually open serial port

9 years agoMerge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
Anthony Towns [Sat, 13 Nov 2010 14:29:11 +0000 (00:29 +1000)]
Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox

9 years agoaltosui: Add RF calibration to TeleMetrum config dialog
Keith Packard [Sat, 13 Nov 2010 01:02:22 +0000 (17:02 -0800)]
altosui: Add RF calibration to TeleMetrum config dialog

I think that's the last user-settable value.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agobetter error behaviour if no map
Anthony Towns [Fri, 12 Nov 2010 13:42:42 +0000 (23:42 +1000)]
better error behaviour if no map

9 years agopull up maps for arbitrary locations
Anthony Towns [Fri, 12 Nov 2010 13:29:40 +0000 (23:29 +1000)]
pull up maps for arbitrary locations

9 years agomake infotable scrollable, revert its fontsize to 14
Anthony Towns [Thu, 11 Nov 2010 17:24:26 +0000 (03:24 +1000)]
make infotable scrollable, revert its fontsize to 14

9 years agotabs -> spaces
Anthony Towns [Thu, 11 Nov 2010 16:08:58 +0000 (02:08 +1000)]
tabs -> spaces

9 years agoadd site map tab, at least for QRS launches
Anthony Towns [Thu, 11 Nov 2010 16:07:41 +0000 (02:07 +1000)]
add site map tab, at least for QRS launches

9 years agoMerge remote branch 'aj/buttonbox' into buttonbox
Keith Packard [Thu, 11 Nov 2010 06:11:21 +0000 (22:11 -0800)]
Merge remote branch 'aj/buttonbox' into buttonbox

9 years agoadd compass bearing during descent
Anthony Towns [Thu, 11 Nov 2010 06:06:32 +0000 (16:06 +1000)]
add compass bearing during descent

9 years agoadd compass bearing to voice output
Anthony Towns [Thu, 11 Nov 2010 05:57:52 +0000 (15:57 +1000)]
add compass bearing to voice output

9 years agouse grayled.png for off
Anthony Towns [Thu, 11 Nov 2010 05:52:01 +0000 (15:52 +1000)]
use grayled.png for off

9 years agoreduce font size for FlightInfoTable
Anthony Towns [Thu, 11 Nov 2010 05:45:43 +0000 (15:45 +1000)]
reduce font size for FlightInfoTable

9 years agoread preferences for --replay
Anthony Towns [Thu, 11 Nov 2010 05:43:05 +0000 (15:43 +1000)]
read preferences for --replay

9 years agoadd --replay command line argument
Anthony Towns [Thu, 11 Nov 2010 05:40:37 +0000 (15:40 +1000)]
add --replay command line argument

9 years agouse value_font for values
Anthony Towns [Thu, 11 Nov 2010 05:38:27 +0000 (15:38 +1000)]
use value_font for values

9 years agoaltos: Use grey leds when unlit - easier to see
Keith Packard [Thu, 11 Nov 2010 00:28:19 +0000 (16:28 -0800)]
altos: Use grey leds when unlit - easier to see

9 years agoaltosui: Add ascent, descent and landed tabs
Keith Packard [Wed, 10 Nov 2010 07:34:32 +0000 (23:34 -0800)]
altosui: Add ascent, descent and landed tabs

This completes the set of tabs for in-flight status information.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Add tab UI with 'pad' mode.
Keith Packard [Tue, 9 Nov 2010 22:40:58 +0000 (14:40 -0800)]
altosui: Add tab UI with 'pad' mode.

This creates a multi-tab interface for flight monitoring
and includes a special tab for 'pad' mode.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Create abstract interface for flight data display
Keith Packard [Tue, 9 Nov 2010 18:21:34 +0000 (10:21 -0800)]
altosui: Create abstract interface for flight data display

This allows the implementation of the flight data display to occur in
the flight UI instead of the display thread.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Fix more calls to AltosPreferences.channel()
Keith Packard [Tue, 9 Nov 2010 06:17:26 +0000 (22:17 -0800)]
altosui: Fix more calls to AltosPreferences.channel()

Oops. Two more.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Fix channel setting at serial open time
Keith Packard [Tue, 9 Nov 2010 06:10:46 +0000 (22:10 -0800)]
altosui: Fix channel setting at serial open time

Was using the previous non-device-specific preferences API.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Create buttons for main actions
Keith Packard [Tue, 9 Nov 2010 06:07:04 +0000 (22:07 -0800)]
altosui: Create buttons for main actions

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Split out flight monitoring to separate window
Keith Packard [Sat, 6 Nov 2010 06:44:47 +0000 (23:44 -0700)]
altosui: Split out flight monitoring to separate window

This creates a per-TD (or replay) window to contain the flight
monitoring information, allowing multiple monitors.

This also adds per-TD preferences for monitoring channel.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Separate out jfreechart and jcommon directories
Keith Packard [Wed, 6 Oct 2010 23:42:27 +0000 (16:42 -0700)]
altosui: Separate out jfreechart and jcommon directories

This allows these packages to be referenced separately

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Remove ability to graph data in .csv files
Keith Packard [Wed, 6 Oct 2010 23:25:49 +0000 (16:25 -0700)]
altosui: Remove ability to graph data in .csv files

There's no reason to support these files when the raw .eeprom or
.telem files which generate them should be used instead.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoremove the csv build dep, as that code will be abandoned
Bdale Garbee [Wed, 6 Oct 2010 23:14:35 +0000 (17:14 -0600)]
remove the csv build dep, as that code will be abandoned

9 years agoupdate changelogs for Debian build debian/0.7.1+32+g8103432
Bdale Garbee [Wed, 6 Oct 2010 22:27:57 +0000 (16:27 -0600)]
update changelogs for Debian build

9 years agoupdate changelogs for Debian build debian/0.7.1+31+g635066c
Bdale Garbee [Wed, 6 Oct 2010 22:26:33 +0000 (16:26 -0600)]
update changelogs for Debian build

9 years agoupdate changelogs for Debian build debian/0.7.1+30+g4396aaa
Bdale Garbee [Wed, 6 Oct 2010 22:26:19 +0000 (16:26 -0600)]
update changelogs for Debian build

9 years agoadd build-dep on libcsv-java
Bdale Garbee [Wed, 6 Oct 2010 22:25:22 +0000 (16:25 -0600)]
add build-dep on libcsv-java

9 years agoupdate changelogs for Debian build debian/0.7.1+28+gd8a2f4c
Bdale Garbee [Wed, 6 Oct 2010 22:19:35 +0000 (16:19 -0600)]
update changelogs for Debian build

9 years agoadd build dep on jfreechart lib
Bdale Garbee [Wed, 6 Oct 2010 22:18:45 +0000 (16:18 -0600)]
add build dep on jfreechart lib

9 years agoaltosui: Add KML file export.
Keith Packard [Wed, 29 Sep 2010 00:56:49 +0000 (17:56 -0700)]
altosui: Add KML file export.

Command line has switches now, --kml and --csv
Export save dialog has combo box to select kml or csv result.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoMerge remote branch 'aj/master'
Keith Packard [Tue, 28 Sep 2010 05:28:07 +0000 (22:28 -0700)]
Merge remote branch 'aj/master'

9 years agoAdd callsign/serial/flight to graph title
Anthony Towns [Tue, 28 Sep 2010 05:27:07 +0000 (15:27 +1000)]
Add callsign/serial/flight to graph title

9 years agoaltosui: use Altos constants in graphing code
Keith Packard [Tue, 28 Sep 2010 05:26:56 +0000 (22:26 -0700)]
altosui: use Altos constants in graphing code

The Altos class nicely defines constants for all of the flight states.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoHax0r graphing to support telem/eeprom files
Anthony Towns [Tue, 28 Sep 2010 04:45:01 +0000 (14:45 +1000)]
Hax0r graphing to support telem/eeprom files

9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Tue, 28 Sep 2010 02:55:47 +0000 (12:55 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: Deal with eeprom dates going backwards across wrap
Keith Packard [Tue, 28 Sep 2010 01:52:30 +0000 (18:52 -0700)]
altosui: Deal with eeprom dates going backwards across wrap

eeprom timestamps can go backwards as the GPS time stamps are
recorded when the first GPS character is received, but not placed into
the eeprom log until the last GPS packet is complete. If this happens
at the same time the tick count is wrapping, then the tick count will
wrap backwards across the 0 boundary causing time to jump forwards.

Fix this by letting time go backwards across the tick boundary, which
requires that we know when the first 'real' tick is read from the
eeprom file.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: .CSV output: add link quality, gps hdop and sat C/N0 numbers
Keith Packard [Tue, 28 Sep 2010 01:51:05 +0000 (18:51 -0700)]
altosui: .CSV output: add link quality, gps hdop and sat C/N0 numbers

This makes the CSV files contain all of the available information.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Create iterables for log file scanning. Split out display threads
Keith Packard [Tue, 28 Sep 2010 00:11:48 +0000 (17:11 -0700)]
altosui: Create iterables for log file scanning. Split out display threads

Convert from log file reading paradigm to using iterators which is
more idiomatic for java. Split more code out of AltosUI.java,
including the display update threads for telemetry monitoring and
logfile replay.x

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Fri, 24 Sep 2010 00:28:06 +0000 (10:28 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: Require 4 sats for 'good' GPS data
Keith Packard [Thu, 23 Sep 2010 23:52:51 +0000 (16:52 -0700)]
altosui: Require 4 sats for 'good' GPS data

Wait for 10 consecutive GPS reports with at least 4 sats before
reporting "GPS ready" state.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: remove unused ReplayThread wrapper classes
Keith Packard [Mon, 20 Sep 2010 13:30:49 +0000 (06:30 -0700)]
altosui: remove unused ReplayThread wrapper classes

These aren't used now that the replay opener dialog knows how to build
a reader from a filename.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Factor some UI elements into separate classes
Keith Packard [Mon, 30 Aug 2010 21:00:04 +0000 (14:00 -0700)]
altosui: Factor some UI elements into separate classes

Clean up AltosUI by moving the two main tables to separate class files.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Mon, 20 Sep 2010 12:05:26 +0000 (22:05 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: Write raw sensor data to .csv files
Keith Packard [Sun, 19 Sep 2010 09:52:29 +0000 (02:52 -0700)]
altosui: Write raw sensor data to .csv files

For data export, provide the raw sensor samples instead of the
filtered values.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Use recorded ground acceleration when reading eeprom files
Keith Packard [Sun, 19 Sep 2010 09:50:43 +0000 (02:50 -0700)]
altosui: Use recorded ground acceleration when reading eeprom files

The flight software records 1000 accelerometer samples and records
that in the flight log. Use that value instead of using the very few
samples recorded in the eeprom before boost is detected. This
generates far more accurate accerometer data in the .csv files.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoAdd JFreeChart to Makefile.am
Anthony Towns [Tue, 14 Sep 2010 21:24:04 +0000 (07:24 +1000)]
Add JFreeChart to Makefile.am

9 years agoAdd graphing.
Anthony Towns [Tue, 14 Sep 2010 20:51:05 +0000 (06:51 +1000)]
Add graphing.

9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Sat, 11 Sep 2010 05:15:14 +0000 (15:15 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: Remember directory containing firmware files
Keith Packard [Sat, 11 Sep 2010 04:07:14 +0000 (21:07 -0700)]
altosui: Remember directory containing firmware files

Instead of forcing the user to navigate to the firmware directory each
time, this remembers the previous directory and starts there.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: set default .csv file name in file save dialog
Keith Packard [Sat, 11 Sep 2010 03:55:05 +0000 (20:55 -0700)]
altosui: set default .csv file name in file save dialog

This uses setSelectedFile to specify which output filename to make the
default in the save dialog.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agomake the column headers comma separated, too, so they align with the data
Bdale Garbee [Fri, 10 Sep 2010 16:42:35 +0000 (10:42 -0600)]
make the column headers comma separated, too, so they align with the data

9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Fri, 10 Sep 2010 06:11:34 +0000 (16:11 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoupdate changelogs for Debian build debian/0.7.1
Bdale Garbee [Fri, 10 Sep 2010 06:09:25 +0000 (00:09 -0600)]
update changelogs for Debian build

9 years agoaltosui: Stop parsing eeprom file after hitting 'landed' state 0.7.1
Keith Packard [Fri, 10 Sep 2010 06:04:59 +0000 (23:04 -0700)]
altosui: Stop parsing eeprom file after hitting 'landed' state

Sometimes there are additional records found in the eeprom file; the
reader is mostly worried about not losing anything, so it reads as
much as it can. However, the last record written for any flight is the
'landed' record, so we can stop looking at the file after hitting that.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Fill in time value of last Eeprom record read from file
Keith Packard [Fri, 10 Sep 2010 06:04:14 +0000 (23:04 -0700)]
altosui: Fill in time value of last Eeprom record read from file

The last record is handled separately, and was missing the code to
compute the time. Sigh.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Remove debug printfs from AltosTelemetryReader
Keith Packard [Fri, 10 Sep 2010 05:55:47 +0000 (22:55 -0700)]
altosui: Remove debug printfs from AltosTelemetryReader

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agorewind packaging changelog, again
Bdale Garbee [Fri, 10 Sep 2010 05:57:34 +0000 (23:57 -0600)]
rewind packaging changelog, again

9 years agoupdate changelogs for Debian build
Bdale Garbee [Fri, 10 Sep 2010 05:52:20 +0000 (23:52 -0600)]
update changelogs for Debian build

9 years agorewind packaging changelog
Bdale Garbee [Fri, 10 Sep 2010 05:51:23 +0000 (23:51 -0600)]
rewind packaging changelog

9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Fri, 10 Sep 2010 05:50:01 +0000 (15:50 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: Fix telemetry file reader to handle tick count wrapping
Keith Packard [Fri, 10 Sep 2010 05:30:48 +0000 (22:30 -0700)]
altosui: Fix telemetry file reader to handle tick count wrapping

The telemetry reader was ignoring tick count wrapping, so you'd see
time go backwards in jumps. Not useful.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoupdate changelogs for Debian build
Bdale Garbee [Fri, 10 Sep 2010 04:50:03 +0000 (22:50 -0600)]
update changelogs for Debian build

9 years agoAdd --with-fat-dir configure option to publish finished stand-alone bits
Keith Packard [Fri, 10 Sep 2010 04:28:10 +0000 (21:28 -0700)]
Add --with-fat-dir configure option to publish finished stand-alone bits

--with-fat-dir specifies a directory to copy the finished
linux/macosx/windows stand-alone ("fat") packages to. A sub-directory
will be created under the specified directory based on the product
version number and the files copied there.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: libaltos.so is built with libtool -- it's in ../libaltos/.libs
Keith Packard [Fri, 10 Sep 2010 03:59:29 +0000 (20:59 -0700)]
altosui: libaltos.so is built with libtool -- it's in ../libaltos/.libs

It used to be in ../libaltos

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Remove some debug printfs.
Keith Packard [Fri, 10 Sep 2010 03:39:41 +0000 (20:39 -0700)]
altosui: Remove some debug printfs.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoAdd firmware and libaltos to 'fat' target at top-level
Keith Packard [Fri, 10 Sep 2010 03:36:12 +0000 (20:36 -0700)]
Add firmware and libaltos to 'fat' target at top-level

This ensures that all of the necessary bits are available to construct
the distribution images.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoupdate changelogs for Debian build debian/0.7+96+g48f5799
Bdale Garbee [Fri, 10 Sep 2010 03:29:20 +0000 (21:29 -0600)]
update changelogs for Debian build

9 years agoaltosui: conflating USB product and vendor IDs is a bad idea
Keith Packard [Fri, 10 Sep 2010 03:24:42 +0000 (20:24 -0700)]
altosui: conflating USB product and vendor IDs is a bad idea

We've now got a USB vendor ID called 'altusmetrum' for generic
altusmetrum devices (old USB ID 0x000A) while the general vendor name
for all devices is 'altusmetrum' as well.

This patch splits vendors and products into separate name spaces,
products are prefixed with product_ and vendor with (oddly) vendor_.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoupdate changelogs for Debian build debian/0.7+94+g1ac3d7e
Bdale Garbee [Fri, 10 Sep 2010 02:34:43 +0000 (20:34 -0600)]
update changelogs for Debian build

9 years agoinitial cut at an altosui man page
Bdale Garbee [Fri, 10 Sep 2010 02:34:22 +0000 (20:34 -0600)]
initial cut at an altosui man page

9 years agoupdate changelogs for Debian build debian/0.7+92+g0ea7576
Bdale Garbee [Fri, 10 Sep 2010 02:06:09 +0000 (20:06 -0600)]
update changelogs for Debian build

9 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Fri, 10 Sep 2010 02:05:27 +0000 (20:05 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

9 years agoaltosui: Display error dialog when AltOS JNI library can't be loaded
Keith Packard [Fri, 10 Sep 2010 00:54:41 +0000 (17:54 -0700)]
altosui: Display error dialog when AltOS JNI library can't be loaded

Having an error dialog appear at application startup seems better than
simply failing to present the device dialog later on.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Store libaltos.so in $(libdir)/altos
Keith Packard [Fri, 10 Sep 2010 00:52:46 +0000 (17:52 -0700)]
altosui: Store libaltos.so in $(libdir)/altos

It's not a public library, so hide it away in a subdirectory.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Need to have JVM include path substituted into libaltos Makefile
Keith Packard [Fri, 10 Sep 2010 00:49:37 +0000 (17:49 -0700)]
altosui: Need to have JVM include path substituted into libaltos Makefile

The libaltos Makefile needs to find the relevant jni.h file, which is
found in the JVM_INCLUDE path, all nicely located by the configure.ac script.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agohandle versioning of ihx files (poorly) by just wildcarding the file name,
Bdale Garbee [Thu, 9 Sep 2010 23:27:07 +0000 (17:27 -0600)]
handle versioning of ihx files (poorly) by just wildcarding the file name,
which assumes there's only one matching .. probably ok on Debian?

9 years agoupdate changelogs for Debian build debian/0.7+86+g6c0ae7e
Bdale Garbee [Thu, 9 Sep 2010 22:27:40 +0000 (16:27 -0600)]
update changelogs for Debian build

9 years agoaltosui: remove FATJAR from all-local to avoid building fat .jar file
Keith Packard [Thu, 9 Sep 2010 22:25:18 +0000 (15:25 -0700)]
altosui: remove FATJAR from all-local to avoid building fat .jar file

the fat .jar file is used in non-native builds to run from a directory
containing all of the freetts jar files along with the altosui jar
file. We don't want this on a real install where freetts is installed separately.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: hack to make JAVAROOT directory get created before javac runs
Keith Packard [Thu, 9 Sep 2010 22:22:14 +0000 (15:22 -0700)]
altosui: hack to make JAVAROOT directory get created before javac runs

This ensures that the JAVAROOT directory gets created by adding it to
the variable used to set the CLASSPATH environment value.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: fix telemetrum.inf FFFE:000A product names on AMD64 and ia64
Keith Packard [Thu, 9 Sep 2010 22:11:41 +0000 (15:11 -0700)]
altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and ia64

This appears to matter to Vista. Dunno why.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Add explicit requirement to create classes directory
Keith Packard [Thu, 9 Sep 2010 22:10:25 +0000 (15:10 -0700)]
altosui: Add explicit requirement to create classes directory

The implicit ordering doesn't appear reliable.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoupdate changelogs for Debian build debian/0.7+81+g012e717
Bdale Garbee [Thu, 9 Sep 2010 21:51:50 +0000 (15:51 -0600)]
update changelogs for Debian build

9 years agoadd libtool to build deps
Bdale Garbee [Thu, 9 Sep 2010 21:51:02 +0000 (15:51 -0600)]
add libtool to build deps

9 years agoupdate changelogs for Debian build debian/0.7+79+g3d49d5f
Bdale Garbee [Thu, 9 Sep 2010 21:43:47 +0000 (15:43 -0600)]
update changelogs for Debian build

9 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Anthony Towns [Sun, 5 Sep 2010 10:49:34 +0000 (20:49 +1000)]
Merge branch 'master' of git://git.gag.com/fw/altos

9 years agoaltosui: ensure that 'altosui' script is installed. Pass arguments along.
Keith Packard [Sun, 5 Sep 2010 09:05:06 +0000 (02:05 -0700)]
altosui: ensure that 'altosui' script is installed. Pass arguments along.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: eeprom files place 'boost' time in the flight number record.
Keith Packard [Sun, 5 Sep 2010 08:55:56 +0000 (01:55 -0700)]
altosui: eeprom files place 'boost' time in the flight number record.

Instead of looking for the first state change record, use the Flight
record to get the boost tick.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Record flight number when scanning file, not when running
Keith Packard [Sun, 5 Sep 2010 08:52:36 +0000 (01:52 -0700)]
altosui: Record flight number when scanning file, not when running

The very first record in the eeprom is the flight number, but it is
time-stamped with the 'boost' time, and so it gets sorted until much
later, delaying the return of data until the rocket enters boost
mode. This drops all of the nice pad GPS and state date on the floor.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Use local .class files in the classpath
Keith Packard [Sun, 5 Sep 2010 08:23:53 +0000 (01:23 -0700)]
altosui: Use local .class files in the classpath

This ensures that compiling only a few changed files will
locate the old .class files instead of using a stale .jar file.

9 years agoaltosui: Prevent voice altitude data from queueing up
Keith Packard [Sun, 5 Sep 2010 08:21:14 +0000 (01:21 -0700)]
altosui: Prevent voice altitude data from queueing up

When flight status changes rapidly, the queue of voice data can get
quite long. This change does two things -- first, it remembers when
the altitude reporting happens due to flight events and delays the
periodic reporting until a suitable time after that, second it ensures
that the voice data has all been delivered before generating a new
altitude report.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Add AltosVoice.drain() to wait for queued speech to finish
Keith Packard [Sun, 5 Sep 2010 08:19:11 +0000 (01:19 -0700)]
altosui: Add AltosVoice.drain() to wait for queued speech to finish

drain() blocks until all pending phrases have been processed, allowing
the UI code to avoid pending data that will end up stale by the time
it is emitted.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Start idle thread after the rocket leaves the pad
Keith Packard [Sun, 5 Sep 2010 08:13:01 +0000 (01:13 -0700)]
altosui: Start idle thread after the rocket leaves the pad

This makes the first altitude report time consistently 10 seconds
after launch, instead of some random time depending on when the rocket
launched relative to the time the device connection was made.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: When replay thread is interrupted, don't make final report
Keith Packard [Sun, 5 Sep 2010 08:08:50 +0000 (01:08 -0700)]
altosui: When replay thread is interrupted, don't make final report

Normally, the replay process makes one final report after the file has
been parsed. However, if the reading process is interrupted to display
something else, this report is just annoying, so don't make it.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Add elevation and range data to main display
Keith Packard [Sun, 5 Sep 2010 08:03:18 +0000 (01:03 -0700)]
altosui: Add elevation and range data to main display

Reported by voice, it's useful to see these on the display as well.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Eeprom files contain only one date; save it.
Keith Packard [Sun, 5 Sep 2010 08:01:10 +0000 (01:01 -0700)]
altosui: Eeprom files contain only one date; save it.

While reading eeprom files, the GPS record is reconstructed each time
the system sees the first GPS log item (the time field), but as the
date isn't repeated, we need to copy it from the old GPS data record.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 years agoaltosui: Remove debugging printf from AltosEepromReader
Keith Packard [Sun, 5 Sep 2010 07:59:54 +0000 (00:59 -0700)]
altosui: Remove debugging printf from AltosEepromReader

These were in place while validing the GPS data reconstruction code
that handles eeprom files missing the first GPS date line due to the
record overwriting bug in old firmware versions.

Signed-off-by: Keith Packard <keithp@keithp.com>