Bdale Garbee [Fri, 27 Aug 2010 09:08:53 +0000 (03:08 -0600)]
Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
Keith Packard [Fri, 27 Aug 2010 07:10:29 +0000 (00:10 -0700)]
altos: prepare for sdcc 2.9.1
A few minor language changes -- non-standard keywords are now prefixed
with __, such as 'at', 'interrupt', 'naked'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:55:44 +0000 (23:55 -0700)]
altosui: command line args are converted to csv format
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:54:53 +0000 (23:54 -0700)]
altosui: Remove debug printf from AltosState.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:53:06 +0000 (23:53 -0700)]
altosui: When parsing saved telem files, errors shouldn't abort file
Make syntax errors in telem files just skip the current line and move
on to the next one instead of abandoning the whole file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:50:51 +0000 (23:50 -0700)]
altosui: Serial line is in UTF-8 encoding. Deal with it.
We read bytes from the serial line and need to convert each line into
a string. So, save the bytes and at EOL, pass the whole mess to the
string constructor with the appropriate encoding info.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:49:37 +0000 (23:49 -0700)]
altosui: Add support for old (version < 3) telemetry files
This lets the code read telemetry files from pre-released versions of
the software. Not strictly necessary for production, but useful for
analysing old files.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:47:38 +0000 (23:47 -0700)]
altosui: AltosEepromReader was mis-setting boost tick
It was supposed to use record.tick instead of the (unset) state.tick
value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:44:25 +0000 (23:44 -0700)]
altosui: add rssi and distance/dir from pad to CSV files
Just adds a couple more fields to the CSV files that might be interesting.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:43:00 +0000 (23:43 -0700)]
altosui: Add AltosGreatCircle constructors
This adds constructurs from AltosGPS pairs and also one from empty
args (which defines both distance and bearing as 0).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:41:26 +0000 (23:41 -0700)]
altosui: Move number parsing code to Altos general class
This moves these shared functions to the global shared class.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 27 Aug 2010 06:37:29 +0000 (23:37 -0700)]
altos: mark gps date written only after it gets into eeprom
Data logging doesn't start until boost detect occurs. As the GPS date
is only logged once, if that happens before logging is written to the
flash, then the GPS date will never get saved.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Aug 2010 22:59:09 +0000 (15:59 -0700)]
altos: print GPS state flags in GPS 'g' command
Having the GPS state information can help with GPS debugging.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 Aug 2010 22:57:09 +0000 (15:57 -0700)]
altos: always rebuild ao_product.c to track git version
The git version is built into ao_product.c and saved in eeprom log
files, providing useful diagnostics about the firmware revision used
for each flight. However, if ao_product.c isn't recompiled, then the
updated version won't be included. Force recompilation of this file
each time make is run to ensure that the final output contains an
updated version number.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 23:43:38 +0000 (16:43 -0700)]
altosui: flush replies from serial link when entering debug mode
We use replies in debug mode a lot and depend on them matching the
expected parameters. The case which caused trouble was using
TeleMetrum to reprogram TeleDongle -- sending the 'm 0' command (to
disable telemetry monitoring on TeleDongle) to the TeleMetrum caused
it to reply 'Syntax Error' which confused the subsequent flashing
operation. Flushing that reply gets things back in sync.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 11:02:27 +0000 (04:02 -0700)]
altosui: write USB serial number string while flashing
USB serial number is encoded in UCS2 as a part of the string
descriptors. Place those right after the other rom config bits so that
altosui can find it. altosui is changed to write the serial number there.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 11:01:47 +0000 (04:01 -0700)]
altosui: always display romconfig ui while flashing
Keith Packard [Tue, 24 Aug 2010 11:01:14 +0000 (04:01 -0700)]
altosui: fetch existing romconfig for flashing
Keith Packard [Tue, 24 Aug 2010 10:59:09 +0000 (03:59 -0700)]
altosui: Delay mapping Flash UI until flashing actually starts
The flash operation may be abandoned before it even starts; this makes
sure the UI doesn't flash up on the screen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 10:58:00 +0000 (03:58 -0700)]
altosui: disable radio monitoring while using serial line for debugging
Keith Packard [Tue, 24 Aug 2010 07:29:11 +0000 (00:29 -0700)]
altosui: Add ability to create CSV file from telem or eeprom files
This creates a comma separated value file to export data for
external programs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 06:15:05 +0000 (23:15 -0700)]
altosui: refactor logfile chooser dialog to share more code
Move file opening logic into logfile chooser as it can be shared that way.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 06:01:36 +0000 (23:01 -0700)]
altosui: Separate out log file choosing dialog to share with CSV generator
This dialog will be shared with the CSV file generating code, so split
it out instead of duplicating it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 24 Aug 2010 05:11:22 +0000 (23:11 -0600)]
Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
Keith Packard [Tue, 24 Aug 2010 05:08:30 +0000 (22:08 -0700)]
altosui: make default Manifest look for built-in freetts
Keith Packard [Tue, 24 Aug 2010 05:03:36 +0000 (22:03 -0700)]
altos: Place rom config variables in fixed location
The device serial number and radio calibration values are stored in
flash, mostly so that TeleDongle gets them saved.
Placing them in well-known locations (starting at 0xa0) makes it
possible to find the previous configuration and to re-write it
easily, without requiring the .map file.
altosui doesn't have the .map file parsing code, so it relies upon
this new technique. As a benefit, it reads the old values from the
device before reprogramming it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 05:02:21 +0000 (22:02 -0700)]
altosui: Finish device programming code
Altosui can now reprogram Altusmetrum devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 05:01:38 +0000 (22:01 -0700)]
altosui: Remove debug printf from AltosRomconfig
Keith Packard [Tue, 24 Aug 2010 05:01:11 +0000 (22:01 -0700)]
altosui: flush serial output before waiting for reply
Keith Packard [Tue, 24 Aug 2010 05:00:16 +0000 (22:00 -0700)]
altosui: remove debug printf from AltosHexfile
Keith Packard [Tue, 24 Aug 2010 04:58:50 +0000 (21:58 -0700)]
altosui: Add lots more cc1111 debug interface functions
These are sufficient to program the flash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 24 Aug 2010 04:55:49 +0000 (21:55 -0700)]
libaltos: use pipe to wake up getchar on close. use mutexes
Keith Packard [Tue, 24 Aug 2010 04:54:47 +0000 (21:54 -0700)]
altosui: pad TM config dialog values to avoid clipping descenders
Keith Packard [Tue, 24 Aug 2010 04:53:37 +0000 (21:53 -0700)]
ao-dumplog: Fix --remote and --channel options to actually work
Keith Packard [Mon, 23 Aug 2010 21:32:58 +0000 (14:32 -0700)]
altosui: Add debug dongle API, split flash UI out
Create an API to talk through the debug port on another AltOS
device. Split the flash UI out from the flash implementation so that a
command line flash utility can be written.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 23 Aug 2010 18:53:19 +0000 (11:53 -0700)]
altosui: Add .ihx file reading code and stub out flashing UI
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 5 Aug 2010 19:00:15 +0000 (15:00 -0400)]
working on java packaging details
Bdale Garbee [Thu, 5 Aug 2010 19:15:04 +0000 (15:15 -0400)]
add freetts as a build dep
Keith Packard [Mon, 23 Aug 2010 06:06:15 +0000 (23:06 -0700)]
altosui: Set callsign when fetching eeprom data over the air
The updated firmware places the callsign in each packet to comply with
regulations, this ensures that TeleDongle has the current callsign
configured.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 23 Aug 2010 06:05:20 +0000 (23:05 -0700)]
altosui: Add TeleMetrum configuration
This presents a dialog with all of the user-settable options in the
TeleMetrum set for editing. Combo boxes are used for everything except
the callsign.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Aug 2010 00:57:31 +0000 (17:57 -0700)]
altosui: Make teledongle callsign configurable
Teledongle uses the callsign in packet mode; this provides a way to
set that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Aug 2010 00:09:41 +0000 (17:09 -0700)]
altos: Define USB product ID in per-product Makefile.defs file
This allows Win7 to tell which kind of device is connected purely by
USB id as it doesn't expose the USB product ID string to user space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Aug 2010 01:22:28 +0000 (18:22 -0700)]
altosui: Select devices by USB vendor/product ID.
Because Win7 doesn't expose the product name, we're swtiching to using
the USB idProduct/idVendor values. This patch adds support for
selecting devices by those new IDs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Aug 2010 01:19:43 +0000 (18:19 -0700)]
libaltos: integrate Windows support.
This adds Windows support for discovery and I/O.
The API to the library is mostly unchanged, except that it now exports
product and vendor USB IDs as Win7 doesn't expose the product name
anywhere that we've been able to find, so we'll be updating the
firmware to use unique idProduct values for each product.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Aug 2010 02:30:55 +0000 (22:30 -0400)]
ao-dumplog: add --channel option (for use with -R option)
Sets the channel when downloading data with the -R option.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Aug 2010 04:42:25 +0000 (00:42 -0400)]
altosui: Start adding code to write csv files from eeprom/telem files
This is a start to code which can write out a csv file full of flight
data from either an eeprom or telem input file. It's not hooked up,
but the restructuring necessary is finished and the output is started.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Aug 2010 04:40:59 +0000 (00:40 -0400)]
altos: add callsign to packet mode, increase payload to 64 bytes
Untested, but it 'should' work. Need to add callsign setting to packet
mode users.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 6 Aug 2010 17:09:21 +0000 (13:09 -0400)]
altosui: Add comments to Eeprom reader
Keith Packard [Fri, 6 Aug 2010 02:49:53 +0000 (22:49 -0400)]
altosui: Compute flight state from eeprom data
This lets eeprom files be used to replay flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 Aug 2010 17:50:18 +0000 (13:50 -0400)]
altosui: Split flight record out of telemetry class
This will permit either telemetry or eeprom data to be used to
construct the sequence of flight events for reply or data generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 5 Aug 2010 17:40:17 +0000 (13:40 -0400)]
altosui: Explicitly initialize Altos class
Because the Altos class is never instantiated, the static initializers
are never called, leaving the string to state mapping empty. Hand-code
the call to the initialer instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 Jul 2010 17:34:21 +0000 (10:34 -0700)]
altosui: Split status and info panels into separate files
This moves some code out of AltosUI.java into separate files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 Jul 2010 17:24:56 +0000 (10:24 -0700)]
altosui: Clear displayed data rows as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 Jul 2010 17:07:38 +0000 (10:07 -0700)]
altosui: Merge gps date and time classes into gps class
No reason to split out the date and time information from the other gps info.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 Jul 2010 17:05:15 +0000 (10:05 -0700)]
altosui: Capture config and version info in .eeprom files
Instead of only writing the serial number to the .eeprom file, write
all of the config values and all of the version reply to the .eeprom
file. The config values, in particular, contain the accelerometer
calibration data which is needed to correctly compute acceleration
from the captured accelerometer data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 31 Jul 2010 16:57:49 +0000 (09:57 -0700)]
altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos constants
Renames the eeprom downloading code and adds a new file to share the
flight data constants across the various UI modules.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 19:07:49 +0000 (12:07 -0700)]
Merge remote branch 'origin/master'
Keith Packard [Thu, 29 Jul 2010 19:06:06 +0000 (12:06 -0700)]
Make altosui test script executable
Bdale Garbee [Thu, 29 Jul 2010 18:57:31 +0000 (12:57 -0600)]
update changelogs for Debian build
Bdale Garbee [Thu, 29 Jul 2010 18:56:59 +0000 (12:56 -0600)]
add a jdk to the build deps
Keith Packard [Thu, 29 Jul 2010 18:56:24 +0000 (11:56 -0700)]
altosui: remove option to install to alternate volume
Bdale Garbee [Thu, 29 Jul 2010 18:50:57 +0000 (12:50 -0600)]
update changelogs for Debian build
Bdale Garbee [Thu, 29 Jul 2010 18:47:37 +0000 (12:47 -0600)]
ugh, fixing failure due to aborted build
Keith Packard [Thu, 29 Jul 2010 18:45:56 +0000 (11:45 -0700)]
Moved Mac OS packaging to altosui dir
Bdale Garbee [Thu, 29 Jul 2010 18:45:18 +0000 (12:45 -0600)]
add swig as a build dep
Keith Packard [Thu, 29 Jul 2010 18:45:12 +0000 (11:45 -0700)]
altosui: Switch eeprom extension back to .eeprom
Bdale Garbee [Thu, 29 Jul 2010 18:40:52 +0000 (12:40 -0600)]
update changelogs for Debian build
Bdale Garbee [Thu, 29 Jul 2010 18:40:25 +0000 (12:40 -0600)]
update changelogs for Debian build
Keith Packard [Thu, 29 Jul 2010 18:24:47 +0000 (11:24 -0700)]
Add Mac OS X packaging bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 18:09:19 +0000 (11:09 -0700)]
altosui: construct Darwin application directory
This adds the necessary files and build steps to construct
AltosUI.app on a Darwin system.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 17:48:52 +0000 (10:48 -0700)]
libaltos: build with java src encoding UTF8
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 17:48:25 +0000 (10:48 -0700)]
altosui: remove debug printf
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 17:45:02 +0000 (10:45 -0700)]
altosui: Close serial, join reader thread, free altos_file
Separating out the close and free actions ensures that the reader thread will not
access freed memory or dereference a null pointer while shutting down the
connection to the serial device. Otherwise, a race condition exists between the
serial close and the thread join.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 17:24:59 +0000 (10:24 -0700)]
altosui: Remove unnecessary freetts .jar files
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 17:24:09 +0000 (10:24 -0700)]
altosui: check for closed serial device before reading
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 29 Jul 2010 17:02:38 +0000 (11:02 -0600)]
update changelogs for Debian build
Bdale Garbee [Thu, 29 Jul 2010 17:01:21 +0000 (11:01 -0600)]
update changelogs for Debian build
Bdale Garbee [Thu, 29 Jul 2010 16:59:18 +0000 (10:59 -0600)]
update changelogs for Debian build
Keith Packard [Thu, 29 Jul 2010 04:49:23 +0000 (21:49 -0700)]
Reset GPS ready status when GPS comes unlocked on the pad
If GPS becomes unlocked, then report that in the UI and via
voice.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 04:01:41 +0000 (21:01 -0700)]
altosui: report rocket ground bearing at landing only if known
if state.from_pad is null, then there isn't any data to report.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 03:18:36 +0000 (20:18 -0700)]
altosui: Replace device dialog. Center eeprom monitor.
This adds a custom dialog for selecting device, which makes it look
much nicer on the screen and allows the user to double-click on an
entry to select it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 02:37:02 +0000 (19:37 -0700)]
altosui: Fix Save flight data monitor layout, add cancel
Use GridBagLayout to improve the appearance of the flight data monitor
widget, add a cancel button to stop loading data (useful if the
connection is wedged).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 29 Jul 2010 00:08:42 +0000 (17:08 -0700)]
altosui: Add progress bar for eeprom downloading status
This has a progress bar tracking the state and block count while
downloading stuff from telemetrum.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 22:41:34 +0000 (15:41 -0700)]
altosui: Add eeprom data capture function. No UI yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 20:29:51 +0000 (13:29 -0700)]
Merge remote branch 'keithp/macos'
Keith Packard [Wed, 28 Jul 2010 20:29:21 +0000 (13:29 -0700)]
Remove debug printf
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 20:10:11 +0000 (13:10 -0700)]
Add voice test command for help in adjusting volume.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 20:01:52 +0000 (13:01 -0700)]
Make voice and channel menus work.
Stores voice and channel data to preferences.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 19:24:53 +0000 (12:24 -0700)]
altosui: Catch errors opening USB devices. Limit list to relevant devices
Avoids a segfault when failing to open a device. Limit listed telemetry
devices to just TeleDongle units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 18:20:22 +0000 (11:20 -0700)]
Merge branch 'macos'
Keith Packard [Wed, 28 Jul 2010 16:31:09 +0000 (09:31 -0700)]
Make ao_log_data re-entrant as it is used for both sensor and GPS logs
Because ao_log_data is called from two different threads, failing to
make it re-entrant would cause the 'log' pointer parameter to get
overwritten if another thread asked to log data while the eeprom was
busy writing out a block.
This would cause the second thread to re-writing data from the first
thread's address, but without re-checksumming the data as the checksum
is computed before the log mutex is taken.
The bug can be seen by log blocks with invalid checksums.
Here's what happens with the ao_gps_tracking_report and ao_log threads:
ao_gps_tracking_report ao_log
Writes a bunch of records
*blocks* in the eeprom flush
sets ao_log_data 'log' to global 'log'
computes checksum for 'log' block
*blocks* on ao_log_mutex
Wakes up
sets ao_log_data 'log' to 'gps_log'
writes remaining records
'gps_log' is left with svid = 0
*blocks* on ao_gps_tracking_data
writes data, reading from
the current ao_log_data 'log'
pointer which points at 'gps_log'
Making ao_log_data re-entrant fixes this by ensuring that the 'ao_log'
thread has its own copy of the ao_log_data 'log' parameter.
I made this function take an __xdata restricted pointer so that it
could be passed in the dptr register instead of needing to go on the stack.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 28 Jul 2010 02:29:38 +0000 (19:29 -0700)]
Force java source encoding to UTF-8
Keith Packard [Tue, 27 Jul 2010 22:29:28 +0000 (15:29 -0700)]
Java voice reporting cleanups.
Make sure it says something at the end of a log file replay.
Make sure it reports max speed after motor burn out, and max height
after apogee.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Jul 2010 17:18:20 +0000 (10:18 -0700)]
Java clean ups -- use varargs where possible, remove AltosSerialReader
Add methods that format stuff using String.format for voice and serial
link, remove AltosSerialReader class and just embed that in the
AltosSerial class directly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Jul 2010 17:18:09 +0000 (10:18 -0700)]
Remove directories as .class file dependencies; it makes them get rebuilt all the time
Keith Packard [Tue, 27 Jul 2010 08:22:56 +0000 (01:22 -0700)]
Clean up altosui build a bit
Keith Packard [Tue, 27 Jul 2010 07:16:15 +0000 (00:16 -0700)]
Add application icons for Mac OS X
Keith Packard [Tue, 27 Jul 2010 07:11:58 +0000 (00:11 -0700)]
Add Mac OS X packaging files for altosui
Keith Packard [Tue, 27 Jul 2010 07:09:41 +0000 (00:09 -0700)]
libaltos: build fat 10.5-compatible library
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 27 Jul 2010 07:09:18 +0000 (00:09 -0700)]
libaltos: make clean remove all built files
Signed-off-by: Keith Packard <keithp@keithp.com>