]>
git.gag.com Git - fw/stlink/log
jnosky [Mon, 14 Nov 2011 21:20:49 +0000 (16:20 -0500)]
Added code so gdbserver can fully support the STM32F4 variable page sizes
gdbserver can now upload up to 1MB projects to flash
jnosky [Mon, 14 Nov 2011 21:16:57 +0000 (16:16 -0500)]
Changed size argument to hex
Address was hex, size was decimal. Now uniform to be hex
jnosky [Mon, 14 Nov 2011 21:15:31 +0000 (16:15 -0500)]
Removed comment about STM32F4 limitations
texane [Mon, 14 Nov 2011 06:16:45 +0000 (22:16 -0800)]
Merge pull request #27 from csamuelson/master
Unable to compile STM32F4 discovery_demo on Linux
Karl Palsson [Mon, 14 Nov 2011 04:14:41 +0000 (04:14 +0000)]
Keep netbeans happy
Karl Palsson [Mon, 14 Nov 2011 04:12:49 +0000 (04:12 +0000)]
Fix memory leaks closing v1 hardware.
Thanks valgrind
Karl Palsson [Mon, 14 Nov 2011 04:12:29 +0000 (04:12 +0000)]
Remove dead code and unused variables
Karl Palsson [Mon, 14 Nov 2011 04:11:10 +0000 (04:11 +0000)]
Turn down default logging level.
And remove dead/duplicate code that is included in the opening of the device
Karl Palsson [Mon, 14 Nov 2011 03:52:19 +0000 (03:52 +0000)]
Start up stlinkv1 faster.
Now that we're not using sg, and we've told the kernel to ignore the device in
usb-mass storage, we don't need to close and wait 5 seconds. We can just
immediately issue the command to switch modes.
Karl Palsson [Mon, 14 Nov 2011 03:47:47 +0000 (03:47 +0000)]
Remove lots of dead code and superfluous trace
Lots of the debug code is far too verbose for anything but usb tracing.
Likewise, remove all the old scsi code that was simply ifdefd out.
Karl Palsson [Mon, 14 Nov 2011 03:24:12 +0000 (03:24 +0000)]
Note that many of these "examples" are busted
Chris Samuelson [Mon, 14 Nov 2011 03:20:30 +0000 (21:20 -0600)]
STM32F4 discovery_demo Makefile needed correct capitalization for Linux
Karl Palsson [Mon, 14 Nov 2011 03:03:07 +0000 (03:03 +0000)]
Remove confusing distclean/clean dichotomy
in the top level, make clean cleans all stlink code.
in an application level, it only cleans that application
Karl Palsson [Mon, 14 Nov 2011 02:59:38 +0000 (02:59 +0000)]
Start to keep an uptodate list of what's been tested in what combinations
Karl Palsson [Sat, 12 Nov 2011 18:21:46 +0000 (18:21 +0000)]
Don't refetch the chip id on every single page erase.
And update some of the logging to be a bit tidier
Karl Palsson [Tue, 8 Nov 2011 01:13:50 +0000 (01:13 +0000)]
Fix linking with new names
Karl Palsson [Tue, 8 Nov 2011 01:13:21 +0000 (01:13 +0000)]
Adding original source of vl factory demo
It compiles, but I've got bugs preventing me from running this yet :(
Karl Palsson [Tue, 8 Nov 2011 00:57:54 +0000 (00:57 +0000)]
Build libraries for stm32l1xx and stm32f10x
These libraries IGNORE assert_param. Maybe later.
Karl Palsson [Mon, 7 Nov 2011 22:56:34 +0000 (22:56 +0000)]
Fix compile error with new libraries
Karl Palsson [Mon, 7 Nov 2011 22:56:15 +0000 (22:56 +0000)]
Rename board specific demos as appropriate
Karl Palsson [Mon, 7 Nov 2011 22:55:20 +0000 (22:55 +0000)]
Rename 32L specific examples
Karl Palsson [Mon, 7 Nov 2011 22:00:13 +0000 (22:00 +0000)]
Restructure libs source to support multi platform
The "libstm32l_discovery" was actually the ST std periph library, plus the
CMSIS core files. Renamed it as such, and restructured the directories and
naming to make this easier to contain the std periph drivers for more than
just one board.
Verified with the LCD demo makefile, and loading it in sram again.
Karl Palsson [Mon, 14 Nov 2011 02:25:31 +0000 (02:25 +0000)]
Don't try reading device params in bad USB modes.
You cannot read device params when we're not in debug mode and trying to will fill the USB buffer with garbage, and you will have to
unplug and replug and start again. (which will fail, because, you're in the
wrong mode... :)
Karl Palsson [Mon, 14 Nov 2011 01:25:56 +0000 (01:25 +0000)]
Fix flash writing for VL cores.
The change from run->step breaks the VL cores. Need to double check that this
still works for L cores. The whole flash writing needs to be better
abstracted.
Lots more informational debug.
texane [Sun, 13 Nov 2011 07:22:44 +0000 (23:22 -0800)]
Merge pull request #25 from jnosky/master
Examples directory update for stm32f4
jnosky [Sat, 12 Nov 2011 22:02:18 +0000 (17:02 -0500)]
Added note about STM32F4 flash support
jnosky [Sat, 12 Nov 2011 21:48:49 +0000 (16:48 -0500)]
Add STM32F4 discovery board demo and make file
jnosky [Sat, 12 Nov 2011 21:48:23 +0000 (16:48 -0500)]
Added IO_Toggle demo and make file
jnosky [Sat, 12 Nov 2011 21:41:46 +0000 (16:41 -0500)]
Added STM32F4xx Std Periph driver source and make file
jnosky [Sat, 12 Nov 2011 21:38:17 +0000 (16:38 -0500)]
Removed binaries
jnosky [Sat, 12 Nov 2011 21:22:49 +0000 (16:22 -0500)]
Added IO_Toggle demo sources and make file
jnosky [Sat, 12 Nov 2011 21:22:03 +0000 (16:22 -0500)]
Added STM32F4 discovery demo sources and make file
jnosky [Sat, 12 Nov 2011 21:21:04 +0000 (16:21 -0500)]
Added USB Device library sources
jnosky [Sat, 12 Nov 2011 21:20:02 +0000 (16:20 -0500)]
Added USB Host library sources
jnosky [Sat, 12 Nov 2011 21:19:17 +0000 (16:19 -0500)]
Added STM32F4xx StdPeriph Driver sources
jnosky [Sat, 12 Nov 2011 21:17:43 +0000 (16:17 -0500)]
Added USB OTG Driver sources
jnosky [Sat, 12 Nov 2011 21:17:03 +0000 (16:17 -0500)]
Added STM32F4-Discovery utilities
jnosky [Sat, 12 Nov 2011 21:16:15 +0000 (16:16 -0500)]
Added my email
Karl Palsson [Sat, 12 Nov 2011 20:45:41 +0000 (20:45 +0000)]
Read chip and core id in device param loading.
Instead of expecting everyone to read it every time they need to check it.
Just assume it's always there.
Karl Palsson [Sat, 12 Nov 2011 20:36:43 +0000 (20:36 +0000)]
Move all the flash size mapping from gdb server into core.
All the device params like flash size and page size should all be in the core open routines, not
_only_ in the gdbserver. (This should stop it from ending up duplicated in the core, and get rid of
some of the hacks that were turning up. All of this is chip specific!)
Fabien Le Mentec [Sat, 12 Nov 2011 08:25:02 +0000 (02:25 -0600)]
[merge] merge jnosky/master
Fabien Le Mentec [Sat, 12 Nov 2011 07:49:08 +0000 (01:49 -0600)]
Merge branch 'jnosky/master'
Karl Palsson [Fri, 11 Nov 2011 22:59:44 +0000 (22:59 +0000)]
Merge branch 'master' of github.com:karlp/stlink
Karl Palsson [Fri, 11 Nov 2011 15:38:09 +0000 (15:38 +0000)]
Finish removing sg-utils dependencies.
The code deps were removed, but the flags stayed in some makefiles.
Karl Palsson [Fri, 11 Nov 2011 15:30:21 +0000 (07:30 -0800)]
Merge pull request #1 from PetteriAimonen/master
Here is a fix for the register bug :)
jnosky [Fri, 11 Nov 2011 01:15:06 +0000 (20:15 -0500)]
Changed chip detection method
Future plan to detect chip ID rather than core ID
jnosky [Fri, 11 Nov 2011 01:12:29 +0000 (20:12 -0500)]
Temp fix to work with F4 up to 64k of flash, changed chip detection
Can debug with up to 64k flash on the F4
jnosky [Fri, 11 Nov 2011 01:09:20 +0000 (20:09 -0500)]
Added the IO_Toggle and discovery demo samples including a working make
Can now build and flash these these samples
jnosky [Fri, 11 Nov 2011 01:06:27 +0000 (20:06 -0500)]
Added all the F4 libraries to the project
Allows the F4 discovery examples to be built
Petteri Aimonen [Thu, 10 Nov 2011 19:38:16 +0000 (21:38 +0200)]
Fixed a bug that caused gdb to display wrong registers when using stlink ver 1.
Fabien Le Mentec [Wed, 9 Nov 2011 06:25:55 +0000 (00:25 -0600)]
[merge] Ned Konz, Fixed spelling and added files to .gitignore
texane [Tue, 8 Nov 2011 06:13:05 +0000 (22:13 -0800)]
Merge pull request #21 from bravikov/master
[fix] parsing command line and sg autodetection
Dmitry Bravikov [Tue, 8 Nov 2011 03:41:43 +0000 (09:41 +0600)]
[fix] parsing command line and sg autodetection
Fabien Le Mentec [Sun, 6 Nov 2011 18:22:59 +0000 (12:22 -0600)]
[update] add bravikov@gmail.com to AUTHORS
Dmitry Bravikov [Sun, 6 Nov 2011 17:26:12 +0000 (23:26 +0600)]
Parsing the arguments of command line
Karl Palsson [Fri, 4 Nov 2011 02:51:15 +0000 (02:51 +0000)]
Merge branch 'master' of https://github.com/texane/stlink
Conflicts:
Makefile
doc/tutorial/tutorial.pdf
example/blink/Makefile
flash/main.c
src/stlink-common.c
src/stlink-usb.c
Mostly whitespace conflicts it seems.
Karl Palsson [Fri, 4 Nov 2011 02:31:17 +0000 (02:31 +0000)]
netbeans project update for flash utility
Karl Palsson [Fri, 4 Nov 2011 02:30:13 +0000 (02:30 +0000)]
Include a udev rules file for v1 boards too, for permissions
Karl Palsson [Fri, 4 Nov 2011 02:23:17 +0000 (02:23 +0000)]
Update tutorial docs and flash writing/reading
Karl Palsson [Fri, 4 Nov 2011 01:56:22 +0000 (01:56 +0000)]
Update documentation removing all sg-utils notes
Just libusb now. Verified the modprobe.conf on Ubuntu 10.04
Karl Palsson [Fri, 4 Nov 2011 01:05:54 +0000 (01:05 +0000)]
Update netbeans project files.
Karl Palsson [Fri, 4 Nov 2011 01:05:27 +0000 (01:05 +0000)]
Fix compilation error after removing devices.
Karl Palsson [Fri, 4 Nov 2011 00:56:50 +0000 (00:56 +0000)]
Writing registers works too
Karl Palsson [Fri, 4 Nov 2011 00:54:01 +0000 (00:54 +0000)]
blinking LEDs via stlink also works
Karl Palsson [Fri, 4 Nov 2011 00:51:30 +0000 (00:51 +0000)]
write_mem8 works too.
I just misinterpreted the test results earlier.
Karl Palsson [Fri, 4 Nov 2011 00:44:18 +0000 (00:44 +0000)]
Fix write_mem32.
Moved some of the static methods up to the top, so they can always be used, so the changes is
messier than it needs to be.
Karl Palsson [Thu, 3 Nov 2011 23:40:27 +0000 (23:40 +0000)]
Remove device names, we now just find it via USB ids.
In the future, we might actually want device names back again, if you have multiple stlink's
connected. But that would be a new device name, not scanning for /dev/sgX looking for scsi
devices.
Karl Palsson [Thu, 3 Nov 2011 23:24:28 +0000 (23:24 +0000)]
Duh, don't try and do a bulk read when we requested 0 bytes back.
Karl Palsson [Thu, 3 Nov 2011 23:16:30 +0000 (23:16 +0000)]
Properly use tags. Doesn't help though.
Karl Palsson [Thu, 3 Nov 2011 21:28:19 +0000 (21:28 +0000)]
Use the libusb based sense and status reading from afaerber
Before, I could a single operation (get version) after plugging in, now I can issue two at least
:) I suspect there are two problems still. 1, I'm not using tags properly, as the original
sg-utils code seemed to skip that. 2) I'm pretty sure I need to be sending variable lengths for
the cdb field.
Karl Palsson [Thu, 3 Nov 2011 03:49:44 +0000 (03:49 +0000)]
Merge branch 'killsg' of github.com:karlp/stlink into killsg
Karl Palsson [Thu, 3 Nov 2011 03:45:23 +0000 (03:45 +0000)]
Read stlink version info via libusb.
Hooray! Stage 1 complete. The stlink version can now be read by sending the scsi
commands via libusb directly, instead of using sg-utils. It's very very prototype code
however, but should come together from here.
Major bugs: Only works when the device has been first plugged in. I'm clearly not
resetting some usb state somewhere.
Now that libusb is being used directly, you can use linux usb-storage quirks to
completely IGNORE the device as mass storage. We'll just grab it via libusb when we
want it.
Karl Palsson [Thu, 3 Nov 2011 01:07:15 +0000 (01:07 +0000)]
Successfully locate and open stlinkv1 by usb
Very very raw, this just finds the device and opens the usb handle.
Karl Palsson [Thu, 3 Nov 2011 00:46:58 +0000 (00:46 +0000)]
Merge branch 'master' into killsg
Conflicts:
src/stlink-common.c
src/test_sg.c
Conflicts were only in changes to logging.
Karl Palsson [Thu, 3 Nov 2011 00:37:32 +0000 (00:37 +0000)]
drop non shared directories from netbeans project
Karl Palsson [Thu, 3 Nov 2011 00:36:31 +0000 (00:36 +0000)]
Remove -sg's private version decoding
Remove duplication of stlink version decoding, and put the decoded version information
into the stlink object itself.
Karl Palsson [Thu, 3 Nov 2011 00:35:19 +0000 (00:35 +0000)]
Remove sg-utils test output
More bulk cleanup on the path to removing sg-utils dependencies. Trying to make
test-sg as simple as possible so I can use it reliably to test on both master and my
killsg branch
Karl Palsson [Tue, 1 Nov 2011 21:56:43 +0000 (21:56 +0000)]
More generic stlinkv2 udev naming
Better support for F4, or anything else that appears as an stlinkv2
Karl Palsson [Tue, 1 Nov 2011 21:23:16 +0000 (21:23 +0000)]
Fix compilation for 32bit machines
%Ld works for size_t only on 64 bit, the correct conversion is %zd
Karl Palsson [Tue, 1 Nov 2011 18:51:14 +0000 (18:51 +0000)]
Remove unneeded old files
Karl Palsson [Tue, 1 Nov 2011 18:50:06 +0000 (18:50 +0000)]
Ignore all elf outputs. Ignore pdflatex outputs
jnosky [Sat, 29 Oct 2011 22:27:48 +0000 (18:27 -0400)]
Merge branch 'HEAD' of http://github.com/jnosky/stlink
jnosky [Sat, 29 Oct 2011 22:17:46 +0000 (18:17 -0400)]
Fixed flash utility for STM32F4
Can write entire 1MB of flash
unknown [Sat, 29 Oct 2011 22:00:26 +0000 (18:00 -0400)]
Fixed flash utility for STM32F4
Can write entire 1MB of flash
Fabien Le Mentec [Thu, 27 Oct 2011 15:58:13 +0000 (10:58 -0500)]
[add] dac example
Fabien Le Mentec [Sun, 23 Oct 2011 13:31:40 +0000 (08:31 -0500)]
[update] tutorial, led blinking from flash
Fabien Le Mentec [Sun, 23 Oct 2011 13:23:38 +0000 (08:23 -0500)]
[fixme] blink_flash example working. more initialization needed, use libstm32_discovery.
Fabien Le Mentec [Sun, 23 Oct 2011 08:26:55 +0000 (03:26 -0500)]
[update] documentation, CHIBIOS
Fabien Le Mentec [Sun, 23 Oct 2011 08:12:23 +0000 (03:12 -0500)]
[update] factorize flash writing code. use core_id to identify.
Fabien Le Mentec [Sun, 23 Oct 2011 06:45:18 +0000 (01:45 -0500)]
[update] AUTHORS
Fabien Le Mentec [Sun, 23 Oct 2011 06:45:01 +0000 (01:45 -0500)]
[update] disable flash write operation checking
texane [Sun, 23 Oct 2011 06:29:47 +0000 (23:29 -0700)]
Merge pull request #17 from csamuelson/master
Update Makefiles to compile on Ubuntu Oneiric
Chris Samuelson [Sun, 23 Oct 2011 02:25:56 +0000 (21:25 -0500)]
Merge branch 'master' of github.com:csamuelson/stlink
Chris Samuelson [Sun, 23 Oct 2011 02:23:53 +0000 (21:23 -0500)]
Place -lusb-1.0 as the last of the linker options
Fabien Le Mentec [Sat, 22 Oct 2011 22:34:05 +0000 (17:34 -0500)]
[update] retry write once on failure
Fabien Le Mentec [Sat, 22 Oct 2011 21:07:13 +0000 (16:07 -0500)]
[fix] stm32l flash write
Karl Palsson [Sat, 22 Oct 2011 20:31:11 +0000 (20:31 +0000)]
Replace all logging
I needed some sanity...
Karl Palsson [Sat, 22 Oct 2011 19:09:31 +0000 (19:09 +0000)]
flag out the only scsi specific code
Also flag out some places where code appears unused.
Fabien Le Mentec [Sat, 22 Oct 2011 18:06:28 +0000 (13:06 -0500)]
[update, wip] stm32l flash write, to be tested
Karl Palsson [Sat, 22 Oct 2011 18:05:24 +0000 (18:05 +0000)]
Remove all #ifdefs for sg-utils.
We're starting on integration from github.com/afaerber
So, instead of scanning all the usb devices, just open what we want.