]> git.gag.com Git - fw/openocd/history - tcl/interface
tcl/board: add pico-debug support
[fw/openocd] / tcl / interface /
2021-03-20 Andrew Wesietcl/interface/ftdi: Add PLS SPC5 debugger config
2021-03-19 Andrew Wesietcl/interface/ftdi: Add miniWiggler debugger config
2021-01-28 Antonio Borneosteppenprobe: fix file permission
2020-11-07 Jonathan McDowelltcl/interface/ftdi: Add HIE JTAG Debugger config
2020-10-30 Antonio Borneotcl/interface/ti-icdi: remove empty lines at end of...
2020-10-28 Diego Herranztcl/interface/ftdi: Add Steppenprobe open hardware...
2020-10-24 John PhamAdded comment to ti-icdi.cfg
2020-10-03 Kevin BurkeARM|Driver: Add DPI Driver for emulation
2020-09-05 Jan Kowalewskitcl/interface/ftdi: fix comment in minimodule-swd.cfg
2020-08-02 Antonio Borneotcl/interface: snps_sdp: fix minor typo s/similiar...
2020-08-02 Antonio Borneonulink: add minimal support for Nu-Link2
2020-08-02 Zale Yujtag/drivers: add support for Nu-Link (Nuvoton ICE...
2020-07-26 Antonio Borneodrivers/linuxgpiod: add led
2020-07-26 Evgeniy DidinIntroduce tcl config files for Synopsys HSDK board
2020-07-13 Antonio Borneotcl/interface: add example of linuxgpiod through dln-2
2020-05-24 Antonio Borneoswim: add new transport
2020-05-09 Antonio Borneotcl: fix typo and spelling
2020-05-02 Antonio Borneocoding style: tcl: remove empty lines at end of text...
2020-04-21 Liming Sunjtag/drivers: add debugging support for Mellanox BlueFi...
2020-02-24 Antonio Borneocoding style: add newline at end of text files
2020-02-23 Leonard Cresteztcl/interface/ftdi: Add imx8mp-evk internal JTAG interface
2020-02-06 Antonio Borneotcl: fix remaining scripts after rework adapter commands
2020-02-06 Andreas Fritiofsontcl: Add interface config for isodebug isolated JTAG...
2020-01-29 Antonio Borneotcl: replace the deprecated commands with "adapter...
2020-01-29 Antonio Borneotcl: replace command "interface" with "adapter driver"
2020-01-14 Antonio Borneostlink: add DAP direct driver
2019-10-15 Al DyriusUpdate FTDI C232HM cfg, and add two new cfgs from cable...
2018-12-06 Antonio Borneostlink: add support for STLINK-V3
2018-12-06 Antonio Borneostlink: add usb pid for v2.1 without mass storage device
2018-09-10 Steven Stallioninterface: adapter configuration for FTDI C232HM
2018-05-31 Edward Fewelljtag/drivers: Add support for TI XDS110 debug probe
2018-03-13 Matej Kogovsekjtag: drivers: add support for FT232R sync bitbang...
2018-03-13 Paul Fertsertcl: interface: usb blaster I: specify driver explicitly
2018-03-12 Mateusz ManowieckiAdd SWD protocol support to buspirate (2nd try)
2018-03-07 Robert Jordenspipistrello: decrease jtag speed to 10 MHz
2018-01-30 Paul Fertsertcl: interface: harmonise RPi configs
2018-01-13 Patrick Stewartftdi swd: disable SWD output pin during input
2018-01-13 Robert Jordensdigilent_jtag_smt2_nc: add support
2017-12-12 Paul Fertserjtag: drivers: stlink: handle all versions with single...
2017-10-27 Jonathan McDowelltcl/interface/ftdi/openrd: Fix FTDI channel + device...
2017-10-03 Diego Herranztcl/interface/ftdi: improve minimodule config
2017-10-03 Jonathan McDowelltcl/interface/ftdi/sheevaplug: Fix FTDI channel configu...
2017-05-31 Grzegorz Kostkaimx_gpio: add mmap based jtag interface for IMX processors
2017-05-12 Forest Crossmanjtag/drivers: Add Cypress KitProg driver
2017-04-23 Matthias Bockadded interface config file for In-Circuit's ICprog...
2016-11-06 Andreas FritiofsonRemove support for the GPL incompatible FTDI D2XX library
2016-11-06 Andreas FritiofsonRemove since long deprecated ft2232 driver
2016-08-14 Remco Bloemeninterface: Add XDS100v3 support.
2016-08-14 Antony Pavlovtcl/interface/ftdi: add config for the MBFTDI adapter
2016-04-12 Marc Schinkinterface/jlink: Fix comment about serial number
2016-02-13 Andrew Kohlsmithadd Digilent HS2 support
2016-02-03 Tim 'mithro' Anselltcl: Support for the miniSpartan6+ board.
2015-11-16 Paul Fertsertcl/interface/ftdi: add 100ask's OpenJTAG config
2015-11-13 Ragnar Sundbladtopic: Interface config file for FTDI UM232H module
2015-10-21 Tim 'mithro' Anselltcl: Setting lowlevel driver for ixo-usb-jtag
2015-09-30 Andreas Färbertcl/interface/ftdi: Add Digilent JTAG-HS3 config
2015-08-06 Christoph Pittracherbcm2835gpio: Add SWD support, Raspberry Pi 2 support.
2015-08-06 Robert Jordenskc705: digilent-jtag/kintex7/jtagspi board
2015-08-06 Robert Jordenspipistrello: ftdi-jtag/spartan6/jtagspi board
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware.
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non...
2015-03-09 Matthijs van Duintcl/interface/ftdi/xdsv2: fix and clarify EMU* signals
2015-02-22 Paul Fertsercfg: add board and target configs for TI SimpleLink...
2015-02-11 Anton Kuzmintcl/interface/ftdi: correct LED config for BusBlaster...
2015-02-11 Joerg FischerJ-Link serial number config option
2015-01-15 Paul Fertsertcl/interface/ftdi: add config for the IoT-LAB adapter
2014-11-02 Paul Fertsertcl/interface/ftdi/swd-resistor-hack: clarify and add...
2014-10-16 Spencer Olivercmsis-dap: add serial number support
2014-10-06 Paul Fertserinterface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control...
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters.
2014-09-11 Paul Fertsertcl/interface/ftdi/sheevaplug: fix device description
2014-09-08 Paul Fertsertcl/interface/ftdi: fix TRST for Olimex TINY adapters
2014-09-08 Paul Fertsertcl/interface/ftdi: add kt-link config (with SWD) for...
2014-08-19 Paul Fertsertcl/interface/ftdi: auto-select SWD from converters...
2014-08-04 Andreas Fritiofsoninterface/ftdi: Mark flyswatter.cfg as tested
2014-06-28 Spencer Olivercfg: add SWD configs for stellaris ftdi based adapters
2014-06-28 Paul Fertsertcl/interface/ftdi: add SWD configs for kt-link, olimex...
2014-06-28 Paul Fertserjtag/drivers/ftdi: require defining SWD_EN signal for...
2014-06-28 Andreas Fritiofsoncfg: Add SWD support to JTAG-lock-pick Tiny 2
2014-03-17 Paul Fertsertcl/interface/ftdi: add Digilent JTAG-SMT2 config
2014-03-17 Bartosz Bielawskistlink_usb.c: add support for STLink V2-1
2014-03-09 Tom Riniinterface/ftdi/xds100v2.cfg: Add another VID/PID, drop...
2014-02-11 Paul Fertserinterface/ftdi/xds100v2.cfg: default to reset state...
2014-02-04 Paul Fertserinterface/ftdi: add TUMPA Lite config
2014-01-20 Franck Jullienjtag/drivers: add USB-Blaster II
2014-01-09 Spencer Olivercmsis-dap: add initial cmsis-dap support
2013-12-31 Franck Jullienjtag_vpi: make the server address configurable
2013-12-14 Paul Fertserftdi/neodb.cfg: mark as tested
2013-10-31 Paul Fertserftdi/tumpa.cfg: enable proper output buffer control...
2013-09-08 Franck Jullienjtag: drivers: Add JTAP VPI client driver
2013-08-29 Pushpal SidhuAdded new ftdi interface device
2013-08-15 Paul Fertserinterface/ftdi/tumpa: remove ftdi_device_desc as it...
2013-08-09 Sergey Alirzaevremove the untested warning in ftdi/olimex-arm-usb...
2013-07-15 Marek Vasutftdi/board: Add support for DENX M53EVK
2013-07-09 Laszlo Pappftdi/xds100v2.cfg: Remove the warning as it has been...
2013-07-08 Andreas Fritiofsoncfg: Update Flyswatter 2 URL
2013-06-12 Paul Fertserftdi: config for TUMPA
2013-06-10 Paul FertserAdd BCM2835 (as found in Raspberry Pi) interface driver
2013-06-05 Ryan CorbinAdded OpenJTAG Driver
2013-06-05 Hsiangkai Wangaice: add Andes AICE support
next