ftdi/tumpa.cfg: enable proper output buffer control, add another USB ID

The schematics used for writing the config file were incorrect, real
hardware needs ACBUS3 _low_ as it's connected directly to the output
buffer's !OE pin.

Also apparently sometimes TUMPA comes with default FTDI IDs.

Real-life tested (including TRST and SRST) with a custom stm32f103
board, thanks to Mike Wang for the adapter sample.

Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1789
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/tcl/interface/ftdi/tumpa.cfg b/tcl/interface/ftdi/tumpa.cfg
index a0cf332ac6dd4be02c3837f5f1b59e01940c6a14..e4b59b118b6e7ca9d9b338b0f2847a3d93172b5c 100644 (file)
--- a/tcl/interface/ftdi/tumpa.cfg
+++ b/tcl/interface/ftdi/tumpa.cfg
@@ -5,9 +5,9 @@
 #
 
 interface ftdi
-ftdi_vid_pid 0x0403 0x8a98
+ftdi_vid_pid 0x0403 0x8a98 0x0403 0x6010
 
-ftdi_layout_init 0x0838 0x087b
+ftdi_layout_init 0x0038 0x087b
 ftdi_layout_signal nTRST -data 0x0020
 ftdi_layout_signal nSRST -data 0x0010