tcl: replace command "interface" with "adapter driver"

Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with command
	sed -i 's/^interface /adapter driver /' $(find tcl/ -type f)

Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5283
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

diff --git a/tcl/board/altera_sockit.cfg b/tcl/board/altera_sockit.cfg
index 569414331bb86474a960ecdf393d2e5c9e0621b5..1466bd46bb6dba4357bff08d12b219aa0d857d23 100644 (file)
--- a/tcl/board/altera_sockit.cfg
+++ b/tcl/board/altera_sockit.cfg
@@ -7,7 +7,7 @@
 
 # openocd does not currently support the on-board USB Blaster II.
 # Install the JTAG header and use a USB Blaster instead.
-interface usb_blaster
+adapter driver usb_blaster
 
 source [find target/altera_fpgasoc.cfg]
 

diff --git a/tcl/board/digilent_analog_discovery.cfg b/tcl/board/digilent_analog_discovery.cfg
index d356fc0f49a5c71e2221313939460241b31bb30e..65eb660842773f16c5e44a4ad574e77150eace8e 100644 (file)
--- a/tcl/board/digilent_analog_discovery.cfg
+++ b/tcl/board/digilent_analog_discovery.cfg
@@ -7,7 +7,7 @@
 # https://github.com/bvanheu/urjtag-ad/commit/8bd883ee01d134f94b79cbbd00df42cd03bafd71
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Digilent USB Device"
 ftdi_vid_pid 0x0403 0x6014
 

diff --git a/tcl/board/gumstix-aerocore.cfg b/tcl/board/gumstix-aerocore.cfg
index ba217c0431eabe8036780d82058c0a85069abdfb..f0103ed451eb6a7a2a066273148864daf523619c 100644 (file)
--- a/tcl/board/gumstix-aerocore.cfg
+++ b/tcl/board/gumstix-aerocore.cfg
@@ -1,6 +1,6 @@
 # JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on
 # the first interface of a Quad FTDI chip.  nTRST is bit 4.
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6011
 
 ftdi_layout_init 0x0000 0x001b

diff --git a/tcl/board/kasli.cfg b/tcl/board/kasli.cfg
index 2c5e26853075b4306be56a4dd888a9d49b1163ea..fb59f931fed3827be587a0e96382cf4d424d7915 100644 (file)
--- a/tcl/board/kasli.cfg
+++ b/tcl/board/kasli.cfg
@@ -1,4 +1,4 @@
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Quad RS232-HS"
 ftdi_vid_pid 0x0403 0x6011
 ftdi_channel 0

diff --git a/tcl/board/novena-internal-fpga.cfg b/tcl/board/novena-internal-fpga.cfg
index 87495e3729343d991eba09b0c8a1b6a966b22cf4..24a76dceb24fd54165f47a067d1493d9f693fabc 100644 (file)
--- a/tcl/board/novena-internal-fpga.cfg
+++ b/tcl/board/novena-internal-fpga.cfg
@@ -14,7 +14,7 @@
 # | DISP0_DAT17 | FPGA_TMS     | 5-11 |  139  | TMS     |
 # +-------------+--------------+------+-------+---------+
 
-interface sysfsgpio
+adapter driver sysfsgpio
 
 transport select jtag
 

diff --git a/tcl/board/numato_mimas_a7.cfg b/tcl/board/numato_mimas_a7.cfg
index 1261feaccbfeea5cdfc7f03aa23c2bf56ec6ab5d..a538872d1e0f05ffa889fbb4da2156199ca8aafb 100644 (file)
--- a/tcl/board/numato_mimas_a7.cfg
+++ b/tcl/board/numato_mimas_a7.cfg
@@ -7,7 +7,7 @@
 #       Programming while powering via USB may lead to programming failure.
 #       Therefore, prefer external power supply.
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Mimas Artix 7 FPGA Module"
 ftdi_vid_pid 0x2a19 0x1009
 

diff --git a/tcl/board/quark_d2000_refboard.cfg b/tcl/board/quark_d2000_refboard.cfg
index d1388bbaaaa43e6a470eab9f4f6ebc8fa5c82985..460e8c969e7fd3144ef353c8a8b5fb8e4778013b 100644 (file)
--- a/tcl/board/quark_d2000_refboard.cfg
+++ b/tcl/board/quark_d2000_refboard.cfg
@@ -1,7 +1,7 @@
 # Intel Quark microcontroller D2000 Reference Board (web search for doc num 333582)
 
 # the board has an onboard FTDI FT232H chip
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6014
 ftdi_channel 0
 

diff --git a/tcl/board/sayma_amc.cfg b/tcl/board/sayma_amc.cfg
index 5d338ed8aadd3481ce243dd7dc2713ee1c6ac72e..0b507ee0e13b69aa8b16150b013d475cd9c9fbd8 100644 (file)
--- a/tcl/board/sayma_amc.cfg
+++ b/tcl/board/sayma_amc.cfg
@@ -10,7 +10,7 @@
 # Sayma AMC is usually combined with Sayma RTM (rear transition module)
 # which features an Artix 7 FPGA.
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Quad RS232-HS"
 ftdi_vid_pid 0x0403 0x6011
 ftdi_channel 0

diff --git a/tcl/board/sifive-hifive1.cfg b/tcl/board/sifive-hifive1.cfg
index 9bc66701cf19f2ce7ca348acef24c5c419e5102a..9e62bbd04094c850a42bc97c4dc425a649da0eb1 100644 (file)
--- a/tcl/board/sifive-hifive1.cfg
+++ b/tcl/board/sifive-hifive1.cfg
@@ -1,6 +1,6 @@
 adapter_khz     10000
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/altera-usb-blaster.cfg b/tcl/interface/altera-usb-blaster.cfg
index 1bfef9dc4f9071e87bc54437a6bfe947b6ee901c..84e77b13ce7faea50a82bf13567dc8f097408bd3 100644 (file)
--- a/tcl/interface/altera-usb-blaster.cfg
+++ b/tcl/interface/altera-usb-blaster.cfg
@@ -4,7 +4,7 @@
 # http://www.altera.com/literature/ug/ug_usb_blstr.pdf
 #
 
-interface usb_blaster
+adapter driver usb_blaster
 usb_blaster_lowlevel_driver ftdi
 # These are already the defaults.
 # usb_blaster_vid_pid 0x09FB 0x6001

diff --git a/tcl/interface/altera-usb-blaster2.cfg b/tcl/interface/altera-usb-blaster2.cfg
index c35be19703859ea919cb4dd944afdafd528fa9bb..4642b1dcfc88b46f64d6bf7f5622eef12aef08ec 100644 (file)
--- a/tcl/interface/altera-usb-blaster2.cfg
+++ b/tcl/interface/altera-usb-blaster2.cfg
@@ -2,7 +2,7 @@
 # Altera USB-Blaster II
 #
 
-interface usb_blaster
+adapter driver usb_blaster
 usb_blaster_vid_pid 0x09fb 0x6010 0x09fb 0x6810
 usb_blaster_lowlevel_driver ublast2
 usb_blaster_firmware /path/to/quartus/blaster_6810.hex

diff --git a/tcl/interface/arm-jtag-ew.cfg b/tcl/interface/arm-jtag-ew.cfg
index 2e8b57e4ca1db3ce198f5c49f0456505e955ae1e..250592f207e752683c0e77e41b5de1e691013616 100644 (file)
--- a/tcl/interface/arm-jtag-ew.cfg
+++ b/tcl/interface/arm-jtag-ew.cfg
@@ -4,5 +4,5 @@
 # http://www.olimex.com/dev/arm-jtag-ew.html
 #
 
-interface arm-jtag-ew
+adapter driver arm-jtag-ew
 

diff --git a/tcl/interface/at91rm9200.cfg b/tcl/interface/at91rm9200.cfg
index 20826478d873adc9b44407dc4ca0014e1af2bc92..0561dac43a6a6b5dc333e3febac2a0e8fb603cb7 100644 (file)
--- a/tcl/interface/at91rm9200.cfg
+++ b/tcl/interface/at91rm9200.cfg
@@ -4,6 +4,6 @@
 # TODO: URL?
 #
 
-interface at91rm9200
+adapter driver at91rm9200
 at91rm9200_device rea_ecr
 

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
index c2f3a83c412e592f3ef00bccde4b3986467cba98..b02d29d06b10b5bf89670cb8851aa8f7d56c6072 100644 (file)
--- a/tcl/interface/buspirate.cfg
+++ b/tcl/interface/buspirate.cfg
@@ -4,7 +4,7 @@
 # http://dangerousprototypes.com/bus-pirate-manual/
 #
 
-interface buspirate
+adapter driver buspirate
 
 # you need to specify port on which BP lives
 #buspirate_port /dev/ttyUSB0

diff --git a/tcl/interface/chameleon.cfg b/tcl/interface/chameleon.cfg
index 2fb74681cff6e255e27f7abb67335cfcfbcea2c9..f523ee73ebdf20c67c0984919d47a5e74a21b146 100644 (file)
--- a/tcl/interface/chameleon.cfg
+++ b/tcl/interface/chameleon.cfg
@@ -4,6 +4,6 @@
 # http://www.amontec.com/chameleon.shtml
 #
 
-interface parport
+adapter driver parport
 parport_cable chameleon
 

diff --git a/tcl/interface/cmsis-dap.cfg b/tcl/interface/cmsis-dap.cfg
index ab5c187eb8029be5981418d7557300833896f9c5..887d2d713417707c1819d0dc1828db109f557567 100644 (file)
--- a/tcl/interface/cmsis-dap.cfg
+++ b/tcl/interface/cmsis-dap.cfg
@@ -4,7 +4,7 @@
 # http://www.keil.com/support/man/docs/dapdebug/
 #
 
-interface cmsis-dap
+adapter driver cmsis-dap
 
 # Optionally specify the serial number of CMSIS-DAP usb device.
 #cmsis_dap_serial 02200201E6661E601B98E3B9

diff --git a/tcl/interface/dummy.cfg b/tcl/interface/dummy.cfg
index 1c148c0cb9c326cfcd1a18cde4f08826ff9f1ad2..6c2fe5f2fb18d44d1c9943f142df881bd1f2fcbd 100644 (file)
--- a/tcl/interface/dummy.cfg
+++ b/tcl/interface/dummy.cfg
@@ -2,5 +2,5 @@
 # Dummy interface (for testing purposes)
 #
 
-interface dummy
+adapter driver dummy
 

diff --git a/tcl/interface/estick.cfg b/tcl/interface/estick.cfg
index adefcb73f4f58b08210aa25678dc65071a86bac6..75e6ea8e5399745feafbb822fafc3d5b10d3f958 100644 (file)
--- a/tcl/interface/estick.cfg
+++ b/tcl/interface/estick.cfg
@@ -4,4 +4,4 @@
 # http://code.google.com/p/estick-jtag/
 #
 
-interface opendous
+adapter driver opendous

diff --git a/tcl/interface/flashlink.cfg b/tcl/interface/flashlink.cfg
index 56dc35e2051a7bdca4d5df242a2a45cbf627e0fd..e0a4b97d042978bf4b691fb1fc386bf8a3896299 100644 (file)
--- a/tcl/interface/flashlink.cfg
+++ b/tcl/interface/flashlink.cfg
@@ -11,6 +11,6 @@ if { [info exists PARPORTADDR] } {
    set _PARPORTADDR 0
 }
 
-interface parport
+adapter driver parport
 parport_port $_PARPORTADDR
 parport_cable flashlink

diff --git a/tcl/interface/ft232r.cfg b/tcl/interface/ft232r.cfg
index b4f71c8d48b34724bbd67601eb845ff1e22b6058..24e338ff30f0c0c84862e734408e96dc44d7633f 100644 (file)
--- a/tcl/interface/ft232r.cfg
+++ b/tcl/interface/ft232r.cfg
@@ -1,2 +1,2 @@
-interface ft232r
+adapter driver ft232r
 adapter_khz 1000

diff --git a/tcl/interface/ftdi/100ask-openjtag.cfg b/tcl/interface/ftdi/100ask-openjtag.cfg
index 01ae2f7ea09d21cfe9e529a7e9f84cb8057b7622..3cbd37e06d8664b775c9be6eb95459cc3103a580 100644 (file)
--- a/tcl/interface/ftdi/100ask-openjtag.cfg
+++ b/tcl/interface/ftdi/100ask-openjtag.cfg
@@ -7,7 +7,7 @@
 # https://blog.matthiasbock.net/wp-content/uploads/2015/04/100ask-JTAGv3.pdf
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "USB<=>JTAG&RS232"
 ftdi_vid_pid 0x1457 0x5118
 

diff --git a/tcl/interface/ftdi/axm0432.cfg b/tcl/interface/ftdi/axm0432.cfg
index 0c24a333ea89723a0836938d00ada59453c9eb66..6cc1752e242c38e0371295e97eab76de44ab2452 100644 (file)
--- a/tcl/interface/ftdi/axm0432.cfg
+++ b/tcl/interface/ftdi/axm0432.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Symphony SoundBite"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/c232hm.cfg b/tcl/interface/ftdi/c232hm.cfg
index 4f623e0f88a40515844f14f7908f05750ad82717..27cf7667457ea9a8f229b44bc768f3da1dc4b2bc 100644 (file)
--- a/tcl/interface/ftdi/c232hm.cfg
+++ b/tcl/interface/ftdi/c232hm.cfg
@@ -13,7 +13,7 @@
 # http://www.ftdichip.com/Support/Documents/AppNotes/AN_135_MPSSE_Basics.pdf
 # http://www.ftdichip.com/Support/Documents/AppNotes/AN_129_FTDI_Hi_Speed_USB_To_JTAG_Example.pdf
 
-interface ftdi
+adapter driver ftdi
 #ftdi_device_desc "C232HM-DDHSL-0"
 #ftdi_device_desc "C232HM-EDHSL-0"
 

diff --git a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg
index d3da6b7ec4fa27145507def698d2b3c8328d10c6..a23ddbfb5e268876667ee1edd89f66d44c798e04 100644 (file)
--- a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg
+++ b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg
@@ -10,7 +10,7 @@ echo "interface uses the same layout as configs that were verified. Please repor
 echo "experience with this file to openocd-devel mailing list, so it could be marked"
 echo "as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "USB-A9260"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
index dc4dca8f74808c1a6b892d006ef8258ef8221f54..67427c5c0a7379fea13967c967d76b620122eb3a 100644 (file)
--- a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
+++ b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
@@ -10,7 +10,7 @@ echo "interface uses the same layout as configs that were verified. Please repor
 echo "experience with this file to openocd-devel mailing list, so it could be marked"
 echo "as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "USB-A9260"
 ftdi_vid_pid 0x0403 0x6001
 

diff --git a/tcl/interface/ftdi/cortino.cfg b/tcl/interface/ftdi/cortino.cfg
index 16ede61298cea0114a60b4beb3fea0cd440c9c79..2bc516cc60d3454e4698a292209745ed7b131298 100644 (file)
--- a/tcl/interface/ftdi/cortino.cfg
+++ b/tcl/interface/ftdi/cortino.cfg
@@ -4,7 +4,7 @@
 # http://www.hitex.com/index.php?id=cortino
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Cortino"
 ftdi_vid_pid 0x0640 0x0032
 

diff --git a/tcl/interface/ftdi/digilent-hs1.cfg b/tcl/interface/ftdi/digilent-hs1.cfg
index e27249b3bbffb023de01b680ecd2170084fb5eee..dfba3393ad26d1aaede5be2c61ef2a862d1d8f0e 100644 (file)
--- a/tcl/interface/ftdi/digilent-hs1.cfg
+++ b/tcl/interface/ftdi/digilent-hs1.cfg
@@ -1,7 +1,7 @@
 # this supports JTAG-HS1 and JTAG-SMT1
 # (the later being the OEM on-board version)
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Digilent Adept USB Device"
 ftdi_vid_pid 0x0403 0x6010
 # channel 1 does not have any functionality

diff --git a/tcl/interface/ftdi/digilent-hs2.cfg b/tcl/interface/ftdi/digilent-hs2.cfg
index 2005b66af0a37cae1b538d20de91051e93bd258c..ae6ba01bb34448b3ca25735b72f94ad00dbdaad7 100644 (file)
--- a/tcl/interface/ftdi/digilent-hs2.cfg
+++ b/tcl/interface/ftdi/digilent-hs2.cfg
@@ -1,6 +1,6 @@
 # this supports JTAG-HS2 (and apparently Nexys4 as well)
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Digilent Adept USB Device"
 ftdi_vid_pid 0x0403 0x6014
 

diff --git a/tcl/interface/ftdi/digilent_jtag_hs3.cfg b/tcl/interface/ftdi/digilent_jtag_hs3.cfg
index f7b8e570cc2ca998aef402ca029aa409a6c74aa6..7160bed8e7cdb5a1ae301ba35b5cbd904b6d9f18 100644 (file)
--- a/tcl/interface/ftdi/digilent_jtag_hs3.cfg
+++ b/tcl/interface/ftdi/digilent_jtag_hs3.cfg
@@ -2,7 +2,7 @@
 # Digilent JTAG-HS3
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6014
 ftdi_device_desc "Digilent USB Device"
 

diff --git a/tcl/interface/ftdi/digilent_jtag_smt2.cfg b/tcl/interface/ftdi/digilent_jtag_smt2.cfg
index 014fe1475c0152fa9a42fb1c06438b022d2ee7da..493ed6af56df6d068b4405532e2e96614bcdd4dd 100644 (file)
--- a/tcl/interface/ftdi/digilent_jtag_smt2.cfg
+++ b/tcl/interface/ftdi/digilent_jtag_smt2.cfg
@@ -7,7 +7,7 @@
 # http://electronix.ru/forum/index.php?showtopic=114633&view=findpost&p=1215497 and ZedBoard schematics
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6014
 
 ftdi_layout_init 0x2088 0x3f8b

diff --git a/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg
index a83a0081e94f53477c3eb41a1a31d2439daf9851..bc783a46cbac636ef4f39586b50bc041a0c3828f 100644 (file)
--- a/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg
+++ b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg
@@ -10,7 +10,7 @@
 # Note that the digilent_jtag_smt2 layout does not work and hangs while
 # the ftdi_device_desc from digilent_hs2 is wrong.
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Digilent USB Device"
 ftdi_vid_pid 0x0403 0x6014
 ftdi_channel 0

diff --git a/tcl/interface/ftdi/dlp-usb1232h.cfg b/tcl/interface/ftdi/dlp-usb1232h.cfg
index f447771e378e6893b304b0c11e679ffdeb6c0dc8..9ddc2c80a856e79801d276a356232ccfb3f5774f 100644 (file)
--- a/tcl/interface/ftdi/dlp-usb1232h.cfg
+++ b/tcl/interface/ftdi/dlp-usb1232h.cfg
@@ -12,7 +12,7 @@ echo "This file was not tested with real interface, it is based on schematics an
 echo "in ft2232.c. Please report your experience with this file to openocd-devel"
 echo "mailing list, so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/dp_busblaster.cfg b/tcl/interface/ftdi/dp_busblaster.cfg
index 73827cfb8af7aa4e36500aeccdaf8ffe34f156b8..86ab4d8408588a7a9b6fd50c787ea3fc997bcbb7 100644 (file)
--- a/tcl/interface/ftdi/dp_busblaster.cfg
+++ b/tcl/interface/ftdi/dp_busblaster.cfg
@@ -11,7 +11,7 @@
 echo "Info : If you need SWD support, flash KT-Link buffer from https://github.com/bharrisau/busblaster
 and use dp_busblaster_kt-link.cfg instead"
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/dp_busblaster_kt-link.cfg b/tcl/interface/ftdi/dp_busblaster_kt-link.cfg
index 2d27519d4f8f399aba665841e4ca54fd33715046..d49a4c98f401cd33e61986cce2a981416a249bca 100644 (file)
--- a/tcl/interface/ftdi/dp_busblaster_kt-link.cfg
+++ b/tcl/interface/ftdi/dp_busblaster_kt-link.cfg
@@ -9,7 +9,7 @@
 # http://dangerousprototypes.com/docs/Bus_Blaster
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/flossjtag-noeeprom.cfg b/tcl/interface/ftdi/flossjtag-noeeprom.cfg
index 18046e7428a45666ba614aa9117db6a1ecfbea6e..42ed18ec3c1b8d355f4781b51b63135ea08dc4e0 100644 (file)
--- a/tcl/interface/ftdi/flossjtag-noeeprom.cfg
+++ b/tcl/interface/ftdi/flossjtag-noeeprom.cfg
@@ -17,7 +17,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/flossjtag.cfg b/tcl/interface/ftdi/flossjtag.cfg
index 13e1f0bb70cd1775f34401a97636b1adb3d4fe4e..c4ad81dccb6cafc29fd2af92fa9364daded176af 100644 (file)
--- a/tcl/interface/ftdi/flossjtag.cfg
+++ b/tcl/interface/ftdi/flossjtag.cfg
@@ -17,7 +17,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6010
 ftdi_device_desc "FLOSS-JTAG"
 #ftdi_serial "FJ000001"

diff --git a/tcl/interface/ftdi/flyswatter.cfg b/tcl/interface/ftdi/flyswatter.cfg
index 56dab1f33e9a7159b2cdda4e6e04bc9fd7a76f19..5e9d4816da8c0c535ed356cd828e23d814820dbc 100644 (file)
--- a/tcl/interface/ftdi/flyswatter.cfg
+++ b/tcl/interface/ftdi/flyswatter.cfg
@@ -4,7 +4,7 @@
 # http://www.tincantools.com/product.php?productid=16134
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Flyswatter"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/flyswatter2.cfg b/tcl/interface/ftdi/flyswatter2.cfg
index 8bd4db4b727b54e0fa582307ca9b368613577159..45dd0bacb9092358b8670408a265a066994f334f 100644 (file)
--- a/tcl/interface/ftdi/flyswatter2.cfg
+++ b/tcl/interface/ftdi/flyswatter2.cfg
@@ -4,7 +4,7 @@
 # http://www.tincantools.com/product.php?productid=16153
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Flyswatter2"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/ft232h-module-swd.cfg b/tcl/interface/ftdi/ft232h-module-swd.cfg
index d2bd1da6199fe635139e2969522dddc37ca95b09..e85640bc6ea7e710070d699e0257d77e48355947 100644 (file)
--- a/tcl/interface/ftdi/ft232h-module-swd.cfg
+++ b/tcl/interface/ftdi/ft232h-module-swd.cfg
@@ -6,7 +6,7 @@
 #
 #
 
-interface ftdi
+adapter driver ftdi
 
 ftdi_vid_pid 0x0403 0x6014
 

diff --git a/tcl/interface/ftdi/gw16042.cfg b/tcl/interface/ftdi/gw16042.cfg
index 90c6f7c122b57dec60f6c45a3966748d2dccddf8..1288f77b18a70f27ba70dd1aadbc032db417ceea 100644 (file)
--- a/tcl/interface/ftdi/gw16042.cfg
+++ b/tcl/interface/ftdi/gw16042.cfg
@@ -17,7 +17,7 @@
 #   BDBUS1 TXD (input)
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "USB-JTAG"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
index b682333ed71a736421694669ad2e2014514da269..3802f6d2cdefce50155c67ea054339f55252d152 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NXHX 10-ETM"
 ftdi_vid_pid 0x0640 0x0028
 

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
index 3483030c6a3e4785c33aa3fb7703185456e9a1e9..f2e64b4f5ebc2e48f59e089c0372d5c0218d12c3 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NXHX 500-ETM"
 ftdi_vid_pid 0x0640 0x0028
 

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
index b4cada0555e862bd43648cc713a928e543919bf2..38f3c690e4ee68748e433114ef36cbf493c50956 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NXHX 500-RE"
 ftdi_vid_pid 0x0640 0x0028
 

diff --git a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
index 67074a2639335c046d4e2f8991dc00c2c992a8b3..bff081f184b165c922da86c106bf61ff51396dd6 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NXHX 50-ETM"
 ftdi_vid_pid 0x0640 0x0028
 

diff --git a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg
index 966dcd8126ab3b56302985d676d3394c6eabb126..f9fbd015a50420f014b426e2503206d6951e92ef 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NXHX50-RE"
 ftdi_vid_pid 0x0640 0x0028
 

diff --git a/tcl/interface/ftdi/hitex_lpc1768stick.cfg b/tcl/interface/ftdi/hitex_lpc1768stick.cfg
index f22d4f7b2c64d235a4ce7118367beb2ba73d91c6..3f49522dabd2c37b0332d183af937b56404f1595 100644 (file)
--- a/tcl/interface/ftdi/hitex_lpc1768stick.cfg
+++ b/tcl/interface/ftdi/hitex_lpc1768stick.cfg
@@ -5,7 +5,7 @@
 #
 
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "LPC1768-Stick"
 ftdi_vid_pid 0x0640 0x0026
 

diff --git a/tcl/interface/ftdi/hitex_str9-comstick.cfg b/tcl/interface/ftdi/hitex_str9-comstick.cfg
index c46f0322cafd31b1bb7de6dfce62e00d771831d2..2b3dc3690e1431fca20cab0c5b99ff0a2abd4d35 100644 (file)
--- a/tcl/interface/ftdi/hitex_str9-comstick.cfg
+++ b/tcl/interface/ftdi/hitex_str9-comstick.cfg
@@ -4,7 +4,7 @@
 # http://www.hitex.com/index.php?id=383
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "STR9-comStick"
 ftdi_vid_pid 0x0640 0x002c
 

diff --git a/tcl/interface/ftdi/icebear.cfg b/tcl/interface/ftdi/icebear.cfg
index 2c03d417bfdefbda6a135c0e9ab54013d228348f..04c27319ed4a3193e1271ac14985daf2f5f7d8af 100644 (file)
--- a/tcl/interface/ftdi/icebear.cfg
+++ b/tcl/interface/ftdi/icebear.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "ICEbear JTAG adapter"
 ftdi_vid_pid 0x0403 0xc140
 

diff --git a/tcl/interface/ftdi/incircuit-icprog.cfg b/tcl/interface/ftdi/incircuit-icprog.cfg
index 5e90a7035dca71e0d8b7b65336dbee38ca0b9712..e0bd5ef5914711fe46c065bbbd6480aeba29a2a3 100644 (file)
--- a/tcl/interface/ftdi/incircuit-icprog.cfg
+++ b/tcl/interface/ftdi/incircuit-icprog.cfg
@@ -6,7 +6,7 @@
 # http://wiki.in-circuit.de/images/0/06/610000158A_openocd.pdf
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6010
 
 ftdi_layout_init 0x0508 0x0f1b

diff --git a/tcl/interface/ftdi/iotlab-usb.cfg b/tcl/interface/ftdi/iotlab-usb.cfg
index fbbad0c86a81f14113138623cdf6e708e8cfa4dc..caa0596fd9637c73dd37165c9285168e5a1e2b83 100644 (file)
--- a/tcl/interface/ftdi/iotlab-usb.cfg
+++ b/tcl/interface/ftdi/iotlab-usb.cfg
@@ -3,7 +3,7 @@
 # https://github.com/iot-lab/iot-lab/wiki
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6010
 
 ftdi_layout_init 0x0008 0x000b

diff --git a/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg b/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg
index c5e5db42081fa8d54f9704e964d7addab7f948b1..82eeaa7b564301704f358335356634f6dd3aff57 100644 (file)
--- a/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg
+++ b/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg
@@ -4,7 +4,7 @@
 # http://www.distortec.com
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "JTAG-lock-pick Tiny 2"
 ftdi_vid_pid 0x0403 0x8220
 

diff --git a/tcl/interface/ftdi/jtagkey.cfg b/tcl/interface/ftdi/jtagkey.cfg
index 7b87e6df1de36687e63ed7071af9cc5a27f087c8..06463ab91d37ab3368ab78e5156f4582157af02e 100644 (file)
--- a/tcl/interface/ftdi/jtagkey.cfg
+++ b/tcl/interface/ftdi/jtagkey.cfg
@@ -4,7 +4,7 @@
 # http://www.amontec.com/jtagkey.shtml
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Amontec JTAGkey"
 ftdi_vid_pid 0x0403 0xcff8
 

diff --git a/tcl/interface/ftdi/jtagkey2.cfg b/tcl/interface/ftdi/jtagkey2.cfg
index c6c2b32f45e2fc281dfa5856071f4232613f60fa..ba151d3b5e7e24b8ae4d1cdf90e85d5e03bf6022 100644 (file)
--- a/tcl/interface/ftdi/jtagkey2.cfg
+++ b/tcl/interface/ftdi/jtagkey2.cfg
@@ -4,7 +4,7 @@
 # http://www.amontec.com/jtagkey2.shtml
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Amontec JTAGkey-2"
 ftdi_vid_pid 0x0403 0xcff8
 

diff --git a/tcl/interface/ftdi/jtagkey2p.cfg b/tcl/interface/ftdi/jtagkey2p.cfg
index dc9c4565e47b4e1f428f5234636effdbc594931b..acb5047e9ad7c46c2aff821a7e957d46f31ad7cf 100644 (file)
--- a/tcl/interface/ftdi/jtagkey2p.cfg
+++ b/tcl/interface/ftdi/jtagkey2p.cfg
@@ -4,7 +4,7 @@
 # http://www.amontec.com/jtagkey2p.shtml
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Amontec JTAGkey-2P"
 ftdi_vid_pid 0x0403 0xcff8
 

diff --git a/tcl/interface/ftdi/kt-link.cfg b/tcl/interface/ftdi/kt-link.cfg
index 1f28d3a107884e001e732d7504e4f5c87dfb77ce..5fc5db9d0ed959f771839d9a5a258cb51d90baa5 100644 (file)
--- a/tcl/interface/ftdi/kt-link.cfg
+++ b/tcl/interface/ftdi/kt-link.cfg
@@ -4,7 +4,7 @@
 # http://www.kristech.eu
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "KT-LINK"
 ftdi_vid_pid 0x0403 0xbbe2
 

diff --git a/tcl/interface/ftdi/lisa-l.cfg b/tcl/interface/ftdi/lisa-l.cfg
index 67002bb96d7ca07a47d0266541451c27d867b2d7..4e52f7b7eff0f32864daaef58358a52e5b1429f9 100644 (file)
--- a/tcl/interface/ftdi/lisa-l.cfg
+++ b/tcl/interface/ftdi/lisa-l.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on schematics an
 echo "in ft2232.c. Please report your experience with this file to openocd-devel"
 echo "mailing list, so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Lisa/L"
 ftdi_vid_pid 0x0403 0x6010
 ftdi_channel 1

diff --git a/tcl/interface/ftdi/luminary-icdi.cfg b/tcl/interface/ftdi/luminary-icdi.cfg
index 2eea806d6e6efdb47203fbf8e0ebb3648fe51039..8bc783e92b1e06825281cee89e04068490b437af 100644 (file)
--- a/tcl/interface/ftdi/luminary-icdi.cfg
+++ b/tcl/interface/ftdi/luminary-icdi.cfg
@@ -15,7 +15,7 @@
 # http://www.luminarymicro.com/products/ek-lm3s9b92.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Luminary Micro ICDI Board"
 ftdi_vid_pid 0x0403 0xbcda
 

diff --git a/tcl/interface/ftdi/luminary-lm3s811.cfg b/tcl/interface/ftdi/luminary-lm3s811.cfg
index 543b1e08fcfaa7bbb2c6d14091dd041fb1d5a58f..aac915e343c6e36ddcc9e26bb9f4ab424de29cf8 100644 (file)
--- a/tcl/interface/ftdi/luminary-lm3s811.cfg
+++ b/tcl/interface/ftdi/luminary-lm3s811.cfg
@@ -11,7 +11,7 @@
 # need to use the "luminary_icdi" layout to work correctly.
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "LM3S811 Evaluation Board"
 ftdi_vid_pid 0x0403 0xbcd9
 

diff --git a/tcl/interface/ftdi/luminary.cfg b/tcl/interface/ftdi/luminary.cfg
index 20b54220e73b68012a08b9c221d8fd993fab628d..5e34f8cea15ed612f01a5a4f9a9c030a126788d8 100644 (file)
--- a/tcl/interface/ftdi/luminary.cfg
+++ b/tcl/interface/ftdi/luminary.cfg
@@ -24,7 +24,7 @@
 # firmware via the ITM module as well as profile data.
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Stellaris Evaluation Board"
 ftdi_vid_pid 0x0403 0xbcd9
 

diff --git a/tcl/interface/ftdi/m53evk.cfg b/tcl/interface/ftdi/m53evk.cfg
index 2b972704980c10fb831a539212e7f20d4c3ba337..6597f2d3053173137a8845e31fd7c14cd245bc41 100644 (file)
--- a/tcl/interface/ftdi/m53evk.cfg
+++ b/tcl/interface/ftdi/m53evk.cfg
@@ -4,7 +4,7 @@
 # http://www.denx-cs.de/?q=M53EVK
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/mbftdi.cfg b/tcl/interface/ftdi/mbftdi.cfg
index d051cccb067441624555cfc171f1da8bfea772da..c0ff865745f1fe4a7e70d2fd1b6c145b97179b26 100644 (file)
--- a/tcl/interface/ftdi/mbftdi.cfg
+++ b/tcl/interface/ftdi/mbftdi.cfg
@@ -9,7 +9,7 @@
 # and http://www.marsohod.org/plata-marsokhod3 for details.
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/minimodule-swd.cfg b/tcl/interface/ftdi/minimodule-swd.cfg
index 5f0b212f5fd37c2723e70e925994d7a52c383cb1..7ab46503e918af228172731b139208cc6ceb4445 100644 (file)
--- a/tcl/interface/ftdi/minimodule-swd.cfg
+++ b/tcl/interface/ftdi/minimodule-swd.cfg
@@ -34,7 +34,7 @@ Supports SWD using the FT2232H or FT4232H minimodule.
 # CN2-22  -  nRESET
 #
 
-interface ftdi
+adapter driver ftdi
 
 #Select your module type and channel
 

diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg
index 7df096d9c8d5a302aca87ec164a0b7bcad61809f..5dcce1fcf96302e61977cc42472df11784dbf46a 100644 (file)
--- a/tcl/interface/ftdi/minimodule.cfg
+++ b/tcl/interface/ftdi/minimodule.cfg
@@ -4,7 +4,7 @@
 # http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "FT2232H MiniModule"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/minispartan6.cfg b/tcl/interface/ftdi/minispartan6.cfg
index 8f1601192b7c01057cb0f058a2d634c1876dc53c..92aebbcfdec4a6fb790d0b37ee720fa03af6c9d7 100644 (file)
--- a/tcl/interface/ftdi/minispartan6.cfg
+++ b/tcl/interface/ftdi/minispartan6.cfg
@@ -1,6 +1,6 @@
 # https://www.scarabhardware.com/minispartan6/
 # https://github.com/scarabhardware/miniSpartan6-plus/raw/master/miniSpartan6%2B_Rev_B.pdf
-interface ftdi
+adapter driver ftdi
 # The miniSpartan6+ sadly doesn't have a custom device description, so we just
 # have to hope you got it right.
 #ftdi_device_desc "Dual RS232-HS"

diff --git a/tcl/interface/ftdi/neodb.cfg b/tcl/interface/ftdi/neodb.cfg
index 6cc8ccf718b157aa6712db1d0e3fc413b86db537..1cfb3526ca6730e2148dd4885cabac1aefe56bde 100644 (file)
--- a/tcl/interface/ftdi/neodb.cfg
+++ b/tcl/interface/ftdi/neodb.cfg
@@ -4,7 +4,7 @@
 # http://wiki.openmoko.org/wiki/Debug_Board_v3
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Debug Board for Neo1973"
 ftdi_vid_pid 0x1457 0x5118
 

diff --git a/tcl/interface/ftdi/ngxtech.cfg b/tcl/interface/ftdi/ngxtech.cfg
index 9eaa3c5bc69d6fe4fa1c8f63080c9408c5df35ef..3aa79ab310729ab235be692c966a53e9f4d09bf0 100644 (file)
--- a/tcl/interface/ftdi/ngxtech.cfg
+++ b/tcl/interface/ftdi/ngxtech.cfg
@@ -10,7 +10,7 @@ echo "interface uses the same layout as configs that were verified. Please repor
 echo "experience with this file to openocd-devel mailing list, so it could be marked"
 echo "as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "NGX JTAG"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg
index 5b27d38ba10e19f767e64e45e829a1b8383902cf..c8e3befb7d40a582671cc5444fc6c28edabb43dd 100644 (file)
--- a/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg
+++ b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg
@@ -4,7 +4,7 @@
 # http://www.olimex.com/dev/arm-usb-ocd-h.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H"
 ftdi_vid_pid 0x15ba 0x002b
 

diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg
index e1aeeeab6fee418996cf09fedb77fcf481d41128..f9126d40d22e3e4c43521ce63382dc5358e27b06 100644 (file)
--- a/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg
+++ b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg
@@ -4,7 +4,7 @@
 # http://www.olimex.com/dev/arm-usb-ocd.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Olimex OpenOCD JTAG"
 ftdi_vid_pid 0x15ba 0x0003
 

diff --git a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
index f77c24b2c0f07a228c5253802fe7caf0c63dc32e..eac25b6da795c811ed07ccc759d0fa40b7251ce1 100644 (file)
--- a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
+++ b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
@@ -4,7 +4,7 @@
 # http://www.olimex.com/dev/arm-usb-tiny-h.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
 ftdi_vid_pid 0x15ba 0x002a
 

diff --git a/tcl/interface/ftdi/olimex-jtag-tiny.cfg b/tcl/interface/ftdi/olimex-jtag-tiny.cfg
index b3c6a716eab886c88f9377c24164d3fcb5fd0005..4811f4dda0eae8daa5651f2bad9921f8d3ec8afa 100644 (file)
--- a/tcl/interface/ftdi/olimex-jtag-tiny.cfg
+++ b/tcl/interface/ftdi/olimex-jtag-tiny.cfg
@@ -4,7 +4,7 @@
 # http://www.olimex.com/dev/arm-usb-tiny.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Olimex OpenOCD JTAG TINY"
 ftdi_vid_pid 0x15ba 0x0004
 

diff --git a/tcl/interface/ftdi/oocdlink.cfg b/tcl/interface/ftdi/oocdlink.cfg
index fc09a16360d20b5076159cc9c8fc8c12cb80de6e..deba4a504e8595b14390f9590c0db83bddc34484 100644 (file)
--- a/tcl/interface/ftdi/oocdlink.cfg
+++ b/tcl/interface/ftdi/oocdlink.cfg
@@ -10,7 +10,7 @@ echo "interface uses the same layout as configs that were verified. Please repor
 echo "experience with this file to openocd-devel mailing list, so it could be marked"
 echo "as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "OOCDLink"
 ftdi_vid_pid 0x0403 0xbaf8
 

diff --git a/tcl/interface/ftdi/opendous_ftdi.cfg b/tcl/interface/ftdi/opendous_ftdi.cfg
index 6a12d72125e60c50804eb4f9882fabc3d6bc376d..50f32fb3a2cf3adea47879fe5dee1825e39b9919 100644 (file)
--- a/tcl/interface/ftdi/opendous_ftdi.cfg
+++ b/tcl/interface/ftdi/opendous_ftdi.cfg
@@ -7,7 +7,7 @@
 # (and it has a different pid number).
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 ftdi_channel 1

diff --git a/tcl/interface/ftdi/openocd-usb-hs.cfg b/tcl/interface/ftdi/openocd-usb-hs.cfg
index 37a717dc590c1c093ab829ea0bdadcf91e2e76a4..6f67689f61c6c573b80d1821449c5d1331e51aa3 100644 (file)
--- a/tcl/interface/ftdi/openocd-usb-hs.cfg
+++ b/tcl/interface/ftdi/openocd-usb-hs.cfg
@@ -4,7 +4,7 @@
 # http://shop.embedded-projects.net/index.php?module=artikel&action=artikel&id=14
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232-HS"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/openocd-usb.cfg b/tcl/interface/ftdi/openocd-usb.cfg
index ff537c7b66c7ac7cc97cd5996fa0dc68ee029500..ed80a05d90149fb4f617b2bdbf981ddb26b8accf 100644 (file)
--- a/tcl/interface/ftdi/openocd-usb.cfg
+++ b/tcl/interface/ftdi/openocd-usb.cfg
@@ -4,7 +4,7 @@
 # http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Dual RS232"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/openrd.cfg b/tcl/interface/ftdi/openrd.cfg
index 9ec5b5f650f679b060873027c01b36a8278e82c9..535c5e896f42c968e7f4773fbf8d9de5664d1a4e 100644 (file)
--- a/tcl/interface/ftdi/openrd.cfg
+++ b/tcl/interface/ftdi/openrd.cfg
@@ -4,7 +4,7 @@
 # http://www.marvell.com/products/embedded_processors/developer/kirkwood/openrd.jsp
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "OpenRD JTAGKey FT2232D B"
 ftdi_vid_pid 0x0403 0x9e90
 ftdi_channel 0

diff --git a/tcl/interface/ftdi/pipistrello.cfg b/tcl/interface/ftdi/pipistrello.cfg
index 5ee5be5bb2c70a14c5c7b5c468fec2c010a800cf..4e392942a1b67d9abd68511c4002a95a194d4845 100644 (file)
--- a/tcl/interface/ftdi/pipistrello.cfg
+++ b/tcl/interface/ftdi/pipistrello.cfg
@@ -1,6 +1,6 @@
 # http://pipistrello.saanlima.com/
 # http://www.saanlima.com/download/pipistrello-v2.0/pipistrello_v2_schematic.pdf
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Pipistrello LX45"
 ftdi_vid_pid 0x0403 0x6010
 # interface 1 is the uart

diff --git a/tcl/interface/ftdi/redbee-econotag.cfg b/tcl/interface/ftdi/redbee-econotag.cfg
index 70c30d658b0c2dd0db44b6b17aeb3320badd599d..b6f6d23bad5116321adc0d6ba69f82a029f1716b 100644 (file)
--- a/tcl/interface/ftdi/redbee-econotag.cfg
+++ b/tcl/interface/ftdi/redbee-econotag.cfg
@@ -13,7 +13,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6010
 
 ftdi_layout_init 0x0c08 0x0c2b

diff --git a/tcl/interface/ftdi/redbee-usb.cfg b/tcl/interface/ftdi/redbee-usb.cfg
index b79300d53bc3c359f5c869f5429604dfb611870a..52ab93e025e98a9861f28d3e423368dc4b873ebd 100644 (file)
--- a/tcl/interface/ftdi/redbee-usb.cfg
+++ b/tcl/interface/ftdi/redbee-usb.cfg
@@ -13,7 +13,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x6010
 ftdi_channel 1
 

diff --git a/tcl/interface/ftdi/sheevaplug.cfg b/tcl/interface/ftdi/sheevaplug.cfg
index 625aad3988ba62e14f075ea3c32b086d8c8153fc..d4ec72e667bddd1410d3341d1cd368dc247aec99 100644 (file)
--- a/tcl/interface/ftdi/sheevaplug.cfg
+++ b/tcl/interface/ftdi/sheevaplug.cfg
@@ -4,7 +4,7 @@
 # http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "SheevaPlug JTAGKey FT2232D B"
 ftdi_vid_pid 0x9e88 0x9e8f
 ftdi_channel 0

diff --git a/tcl/interface/ftdi/signalyzer-lite.cfg b/tcl/interface/ftdi/signalyzer-lite.cfg
index 4988a3bfd447fbb7d5cb78e0e404ee7d39ce22fb..4778420058f156531c7d94f56749ce2862b41249 100644 (file)
--- a/tcl/interface/ftdi/signalyzer-lite.cfg
+++ b/tcl/interface/ftdi/signalyzer-lite.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Signalyzer LITE"
 ftdi_vid_pid 0x0403 0xbca1
 

diff --git a/tcl/interface/ftdi/signalyzer.cfg b/tcl/interface/ftdi/signalyzer.cfg
index e2629beec9a03de32e3483391678fcf9f69c7e3a..2439298352e2158e215f067d652dd0be5dbdc2c5 100644 (file)
--- a/tcl/interface/ftdi/signalyzer.cfg
+++ b/tcl/interface/ftdi/signalyzer.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Signalyzer"
 ftdi_vid_pid 0x0403 0xbca0
 

diff --git a/tcl/interface/ftdi/stm32-stick.cfg b/tcl/interface/ftdi/stm32-stick.cfg
index 2aff1fe8fd9b080166c7f8596e5569f055155e86..7ae02bd8009df8f4f945e131633db6d73d5f806d 100644 (file)
--- a/tcl/interface/ftdi/stm32-stick.cfg
+++ b/tcl/interface/ftdi/stm32-stick.cfg
@@ -4,7 +4,7 @@
 # http://www.hitex.com/index.php?id=340
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "STM32-PerformanceStick"
 ftdi_vid_pid 0x0640 0x002d
 

diff --git a/tcl/interface/ftdi/ti-icdi.cfg b/tcl/interface/ftdi/ti-icdi.cfg
index 6af809cd96f8f724e9a2d1c78341464e0fc95ff0..55085eaee04f0f0ecfbc4891a7248873a42b4173 100644 (file)
--- a/tcl/interface/ftdi/ti-icdi.cfg
+++ b/tcl/interface/ftdi/ti-icdi.cfg
@@ -6,7 +6,7 @@
 # support) but the USB IDs are different.
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0451 0xc32a
 
 ftdi_layout_init 0x00a8 0x00eb

diff --git a/tcl/interface/ftdi/tumpa-lite.cfg b/tcl/interface/ftdi/tumpa-lite.cfg
index 657515a91f2f42f55298e29749299b7b094a393c..7f576e91d2f17f22591749a2085d8f965eceda0d 100644 (file)
--- a/tcl/interface/ftdi/tumpa-lite.cfg
+++ b/tcl/interface/ftdi/tumpa-lite.cfg
@@ -4,7 +4,7 @@
 # http://www.diygadget.com/tiao-usb-multi-protocol-adapter-lite-jtag-spi-i2c-serial.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x8a99
 
 ftdi_layout_init 0x0038 0x087b

diff --git a/tcl/interface/ftdi/tumpa.cfg b/tcl/interface/ftdi/tumpa.cfg
index e4b59b118b6e7ca9d9b338b0f2847a3d93172b5c..1a4e3cdfa33a66eab9a6b8579a81815893e09014 100644 (file)
--- a/tcl/interface/ftdi/tumpa.cfg
+++ b/tcl/interface/ftdi/tumpa.cfg
@@ -4,7 +4,7 @@
 # http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0x8a98 0x0403 0x6010
 
 ftdi_layout_init 0x0038 0x087b

diff --git a/tcl/interface/ftdi/turtelizer2-revB.cfg b/tcl/interface/ftdi/turtelizer2-revB.cfg
index 45840402acf9eb9674e811b580862ad0b07fbd70..34ae8612986c089a83e9a8b332b86ce59174c109 100644 (file)
--- a/tcl/interface/ftdi/turtelizer2-revB.cfg
+++ b/tcl/interface/ftdi/turtelizer2-revB.cfg
@@ -9,7 +9,7 @@ echo "This file was not tested with real interface, it is based on schematics an
 echo "in ft2232.c. Please report your experience with this file to openocd-devel"
 echo "mailing list, so it could be marked as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
 ftdi_vid_pid 0x0403 0xbdc8
 

diff --git a/tcl/interface/ftdi/turtelizer2-revC.cfg b/tcl/interface/ftdi/turtelizer2-revC.cfg
index 918ac497b76722719faf9f281cfca9f596de7766..f5192fb31059c48d244c1fef7b2528932db3a7f5 100644 (file)
--- a/tcl/interface/ftdi/turtelizer2-revC.cfg
+++ b/tcl/interface/ftdi/turtelizer2-revC.cfg
@@ -4,7 +4,7 @@
 # http://www.ethernut.de/en/hardware/turtelizer/index.html
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
 ftdi_vid_pid 0x0403 0xbdc8
 

diff --git a/tcl/interface/ftdi/um232h.cfg b/tcl/interface/ftdi/um232h.cfg
index 6ba6f43b2aec0c00fcf3521f8e12445ce7a2b85b..2dabbec4a6b7ebd0dd8d91ac5deadd8e4d50d80d 100644 (file)
--- a/tcl/interface/ftdi/um232h.cfg
+++ b/tcl/interface/ftdi/um232h.cfg
@@ -7,7 +7,7 @@
 # Note that UM232H and UM232H-B are 3.3V only.
 #
 
-interface ftdi
+adapter driver ftdi
 #ftdi_device_desc "UM232H"
 ftdi_vid_pid 0x0403 0x6014
 

diff --git a/tcl/interface/ftdi/vpaclink.cfg b/tcl/interface/ftdi/vpaclink.cfg
index 20576196405c8c6e0af94849cc20595048209247..ed4895a6bd7075380a54d072517d75f62b04df61 100644 (file)
--- a/tcl/interface/ftdi/vpaclink.cfg
+++ b/tcl/interface/ftdi/vpaclink.cfg
@@ -10,7 +10,7 @@ echo "interface uses the same layout as configs that were verified. Please repor
 echo "experience with this file to openocd-devel mailing list, so it could be marked"
 echo "as working or fixed."
 
-interface ftdi
+adapter driver ftdi
 ftdi_device_desc "VPACLink"
 ftdi_vid_pid 0x0403 0x6010
 

diff --git a/tcl/interface/ftdi/xds100v2.cfg b/tcl/interface/ftdi/xds100v2.cfg
index 2628aa0869599587a39ed343a6f66aaefaa1e718..860a7585d9845a31a3ed741d078b5719b26fa3da 100644 (file)
--- a/tcl/interface/ftdi/xds100v2.cfg
+++ b/tcl/interface/ftdi/xds100v2.cfg
@@ -7,7 +7,7 @@
 # to the registered TI users.
 #
 
-interface ftdi
+adapter driver ftdi
 ftdi_vid_pid 0x0403 0xa6d0 0x0403 0x6010
 
 ftdi_layout_init 0x0038 0x597b

diff --git a/tcl/interface/imx-native.cfg b/tcl/interface/imx-native.cfg
index c2f80eb590999d18fa2b6c6f3abee68639969e0f..d9bc7eb04d4cd2281ba1558781b19329f4941d8f 100644 (file)
--- a/tcl/interface/imx-native.cfg
+++ b/tcl/interface/imx-native.cfg
@@ -7,7 +7,7 @@
 #
 #
 
-interface imx_gpio
+adapter driver imx_gpio
 
 # For most IMX processors 0x0209c000
 imx_gpio_peripheral_base 0x0209c000

diff --git a/tcl/interface/jlink.cfg b/tcl/interface/jlink.cfg
index a4f9dddd76557ec660406e7292bb26b771740ebf..51f420b7ff6ad74f18c50059f570e27339222877 100644 (file)
--- a/tcl/interface/jlink.cfg
+++ b/tcl/interface/jlink.cfg
@@ -4,7 +4,7 @@
 # http://www.segger.com/jlink.html
 #
 
-interface jlink
+adapter driver jlink
 
 # The serial number can be used to select a specific device in case more than
 # one is connected to the host.

diff --git a/tcl/interface/jtag_vpi.cfg b/tcl/interface/jtag_vpi.cfg
index a37a11ed058fb10bb7e71e8cd157bc44611362d3..e665a6331da6f94c921df2bc8627233ebd49365f 100644 (file)
--- a/tcl/interface/jtag_vpi.cfg
+++ b/tcl/interface/jtag_vpi.cfg
@@ -1,4 +1,4 @@
-interface jtag_vpi
+adapter driver jtag_vpi
 
 # Set the VPI JTAG server port
 if { [info exists VPI_PORT] } {

diff --git a/tcl/interface/kitprog.cfg b/tcl/interface/kitprog.cfg
index 94497147f041a97b4b2e3fe2bc6bb703a0a745fa..29fce489bffd7e546f9bc8113710a2600bfd156e 100644 (file)
--- a/tcl/interface/kitprog.cfg
+++ b/tcl/interface/kitprog.cfg
@@ -6,7 +6,7 @@
 # interface driver or switch the KitProg to KitProg mode.
 #
 
-interface kitprog
+adapter driver kitprog
 
 # Optionally specify the serial number of the KitProg you want to use.
 #kitprog_serial 1926402735485200

diff --git a/tcl/interface/nds32-aice.cfg b/tcl/interface/nds32-aice.cfg
index 5363b4c1db518651cf6cc1ad5fef70f86b73f9a4..8f32c899c800d72b89273db78a236a8c8e448191 100644 (file)
--- a/tcl/interface/nds32-aice.cfg
+++ b/tcl/interface/nds32-aice.cfg
@@ -4,7 +4,7 @@
 # http://www.andestech.com
 #
 
-interface aice
+adapter driver aice
 aice desc "Andes AICE adapter"
 aice serial "C001-42163"
 aice vid_pid 0x1CFC 0x0000

diff --git a/tcl/interface/opendous.cfg b/tcl/interface/opendous.cfg
index 21ced6fbe7603e8edc7b325f2e6b89415adaa2d7..23fddc69cf0b319b0a55bfb6f8e779ee91e546b8 100644 (file)
--- a/tcl/interface/opendous.cfg
+++ b/tcl/interface/opendous.cfg
@@ -4,4 +4,4 @@
 # http://code.google.com/p/opendous-jtag/
 #
 
-interface opendous
+adapter driver opendous

diff --git a/tcl/interface/openjtag.cfg b/tcl/interface/openjtag.cfg
index b20c22b6c624ffaf4905c5aa175b9c3a87ec62a0..7bd532545ac05738ffa699e1a8887db8d126b5fb 100644 (file)
--- a/tcl/interface/openjtag.cfg
+++ b/tcl/interface/openjtag.cfg
@@ -4,5 +4,5 @@
 # www.openjtag.org
 #
 
-interface openjtag
+adapter driver openjtag
 openjtag_device_desc "Open JTAG Project"
\ No newline at end of file

diff --git a/tcl/interface/osbdm.cfg b/tcl/interface/osbdm.cfg
index e88ce50b594681ede42096edf942cb01e60d19d7..6e88c0736bec0da2c5dc6e3a67f0bdec6ce3d56e 100644 (file)
--- a/tcl/interface/osbdm.cfg
+++ b/tcl/interface/osbdm.cfg
@@ -3,5 +3,5 @@
 #
 # http://pemicro.com/osbdm/
 #
-interface osbdm
+adapter driver osbdm
 reset_config srst_only

diff --git a/tcl/interface/parport.cfg b/tcl/interface/parport.cfg
index ae3f8f15874e71d1ad6fabbc52bedb9c44dfdd6f..4c0b260b9f921c76d0b71eb1dfdf25e412f78fa0 100644 (file)
--- a/tcl/interface/parport.cfg
+++ b/tcl/interface/parport.cfg
@@ -14,6 +14,6 @@ if { [info exists PARPORTADDR] } {
    }
 }
 
-interface parport
+adapter driver parport
 parport_port $_PARPORTADDR
 parport_cable wiggler

diff --git a/tcl/interface/parport_dlc5.cfg b/tcl/interface/parport_dlc5.cfg
index 98345808eb76f0a9c76fdadae02dd1872a231f6c..b1aa0a9a73ccff9f7d83fe005f57a6632647e793 100644 (file)
--- a/tcl/interface/parport_dlc5.cfg
+++ b/tcl/interface/parport_dlc5.cfg
@@ -10,7 +10,7 @@ if { [info exists PARPORTADDR] } {
    set _PARPORTADDR 0
 }
 
-interface parport
+adapter driver parport
 parport_port $_PARPORTADDR
 parport_cable dlc5
 

diff --git a/tcl/interface/raspberrypi-native.cfg b/tcl/interface/raspberrypi-native.cfg
index c63dfdbc759979678f41d6a2893e919ece727ee2..2d0547f310d1b70f3f2b3949d77cffa6df3d70ec 100644 (file)
--- a/tcl/interface/raspberrypi-native.cfg
+++ b/tcl/interface/raspberrypi-native.cfg
@@ -8,7 +8,7 @@
 # Do not forget the GND connection, pin 6 of the expansion header.
 #
 
-interface bcm2835gpio
+adapter driver bcm2835gpio
 
 bcm2835gpio_peripheral_base 0x20000000
 

diff --git a/tcl/interface/raspberrypi2-native.cfg b/tcl/interface/raspberrypi2-native.cfg
index 26a31c55e0deca8d9b4198dfac0c6690c6f8c943..e53b0f3b02ecb40bf25144eafb68faccf56b23bf 100644 (file)
--- a/tcl/interface/raspberrypi2-native.cfg
+++ b/tcl/interface/raspberrypi2-native.cfg
@@ -8,7 +8,7 @@
 # Do not forget the GND connection, pin 6 of the expansion header.
 #
 
-interface bcm2835gpio
+adapter driver bcm2835gpio
 
 bcm2835gpio_peripheral_base 0x3F000000
 

diff --git a/tcl/interface/rlink.cfg b/tcl/interface/rlink.cfg
index 2f13cc4893ff4aabacec12724c6ba6524b45dfca..3fe90ab428c39c113943860a1e212b8908fe8148 100644 (file)
--- a/tcl/interface/rlink.cfg
+++ b/tcl/interface/rlink.cfg
@@ -4,5 +4,5 @@
 # http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html
 #
 
-interface rlink
+adapter driver rlink
 

diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg
index 735ad5a4ec9cdb9df62a14bf7af213ea61c8b160..e9a7b17b1bc9a7e41bfbd1a0434ddf70c81ea9cf 100644 (file)
--- a/tcl/interface/stlink.cfg
+++ b/tcl/interface/stlink.cfg
@@ -3,7 +3,7 @@
 # debugger/programmer
 #
 
-interface hla
+adapter driver hla
 hla_layout stlink
 hla_device_desc "ST-LINK"
 hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753

diff --git a/tcl/interface/sysfsgpio-raspberrypi.cfg b/tcl/interface/sysfsgpio-raspberrypi.cfg
index 9f5b87c388fb1ea573c708ae35cc338e0b983762..ebb1502193d1d8b6280d25ab04d21a40f7e725be 100644 (file)
--- a/tcl/interface/sysfsgpio-raspberrypi.cfg
+++ b/tcl/interface/sysfsgpio-raspberrypi.cfg
@@ -8,7 +8,7 @@
 # Do not forget the GND connection, pin 6 of the expansion header.
 #
 
-interface sysfsgpio
+adapter driver sysfsgpio
 
 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
 # Header pin numbers: 23 22 19 21

diff --git a/tcl/interface/ti-icdi.cfg b/tcl/interface/ti-icdi.cfg
index 0fc3a9b6755181bb351f7b32833752c9bb151c5d..9b46b437caf0b1b2f410a65dc999b969b6240c8a 100644 (file)
--- a/tcl/interface/ti-icdi.cfg
+++ b/tcl/interface/ti-icdi.cfg
@@ -7,7 +7,7 @@
 # http://www.ti.com/tool/ek-lm4f232
 #
 
-interface hla
+adapter driver hla
 hla_layout ti-icdi
 hla_vid_pid 0x1cbe 0x00fd
 

diff --git a/tcl/interface/ulink.cfg b/tcl/interface/ulink.cfg
index 3b1fad071c3cd88207901c02af9fa49dbd1e8130..164b990a19999d1a4029c0ada6f10d022ce8098d 100644 (file)
--- a/tcl/interface/ulink.cfg
+++ b/tcl/interface/ulink.cfg
@@ -5,4 +5,4 @@
 # http://article.gmane.org/gmane.comp.debugging.openocd.devel/17362
 #
 
-interface ulink
+adapter driver ulink

diff --git a/tcl/interface/usb-jtag.cfg b/tcl/interface/usb-jtag.cfg
index cb4d29bbc93f58e44438de443bd6fc547a9eab8d..8617c78c360bb840a4df140f1dc5a97ee2240e4c 100644 (file)
--- a/tcl/interface/usb-jtag.cfg
+++ b/tcl/interface/usb-jtag.cfg
@@ -29,7 +29,7 @@
 # level driver. Loading firmware is currently only supported on the ublast2
 # driver but ixo-usb-jtag requires the ftdi driver.
 
-interface usb_blaster
+adapter driver usb_blaster
 usb_blaster_vid_pid 0x16C0 0x06AD
 usb_blaster_device_desc "Van Ooijen Technische Informatica"
 # ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the

diff --git a/tcl/interface/usbprog.cfg b/tcl/interface/usbprog.cfg
index b4f0da328399634f209b87c05f007f1cc4be0d28..f65c1d473d5651993d263d5852302ec79312e7ba 100644 (file)
--- a/tcl/interface/usbprog.cfg
+++ b/tcl/interface/usbprog.cfg
@@ -4,7 +4,7 @@
 # http://embedded-projects.net/index.php?page_id=135
 #
 
-interface usbprog
+adapter driver usbprog
 # USBprog is broken w/short TMS sequences, this is a workaround
 # until the C code can be fixed.
 tms_sequence long

diff --git a/tcl/interface/vsllink.cfg b/tcl/interface/vsllink.cfg
index fad7934904c664c2a29d1086dd524832f0806c31..a587176ae2cf578953790b3f3cbd664031057152 100644 (file)
--- a/tcl/interface/vsllink.cfg
+++ b/tcl/interface/vsllink.cfg
@@ -4,5 +4,5 @@
 # http://www.versaloon.com/
 #
 
-interface vsllink
+adapter driver vsllink
 

diff --git a/tcl/interface/xds110.cfg b/tcl/interface/xds110.cfg
index 495e202583cb26b461d813408e7e9f0be9401f99..edc438d3bd5ca1ff31a50aba627c6d32495f8044 100644 (file)
--- a/tcl/interface/xds110.cfg
+++ b/tcl/interface/xds110.cfg
@@ -5,7 +5,7 @@
 # http://processors.wiki.ti.com/index.php/Emulation_Software_Package#XDS110_Support_Utilities
 #
 
-interface xds110
+adapter driver xds110
 
 # Use serial number option to use a specific XDS110
 # when more than one are connected to the host.