measure battery voltage at battery, not LDO input
[hw/telemini] / telemini.pcb
2013-12-02 Bdale Garbeemeasure battery voltage at battery, not LDO input next
2013-12-02 Keith PackardReplace LDO output cap with 4.7uF
2013-12-02 Keith PackardReduce ballast cap from 47uF to 22uF
2013-12-02 Keith PackardSwitch LDO to TI TPS76133
2013-12-02 Keith PackardResize and reposition refdes
2013-08-26 Keith PackardResistors: current-limit -> 1k. Pyro -> 8.06k/9.09k
2013-08-09 Bdale Garbeeadd a serial number block to the silk fab-phoenix
2013-03-28 Bdale Garbeeset version to 1.1
2013-03-27 Bdale Garbeeadd surface floods for good RF launch
2013-03-26 Bdale Garbeeimprove silk
2013-03-26 Bdale Garbeef'ing selection that won't go away
2013-03-26 Bdale Garbeeroute complete, drc clean
2013-03-23 Bdale Garbeelots more done
2013-03-23 Bdale Garbeemaking progress on placement .. lots still to do, though
2013-03-23 Bdale Garbeefirst stab at an EasyMetrum + TeleMini hybrid for TeleM...
2013-01-20 Bdale GarbeeMerge branch 'master' into next
2013-01-20 Bdale Garbeereplace SMA with new footprint
2012-12-05 Bdale Garbeework in progress
2011-06-06 Bdale Garbeeupdate version to 1.0 in anticipation of sending out...
2011-05-13 Bdale Garbeeadd apogee / main labels to silk screen
2011-04-21 Bdale Garbeeadd silkscreen rectangle for serial number fab-v0.2
2011-04-21 Bdale Garbeeadd 100uF ballast cap on 3.3V rail, update silkscreen...
2011-04-19 Bdale Garbeechange debug connector to 50 mil pitch
2011-03-15 Bdale Garbeemore copper shoving to add a "guard trace" at ground...
2011-03-15 Bdale Garbeemove oscillator as far west as possible to try and...
2010-11-23 Bdale Garbeehide top silk again v0.1 fab-v0.1
2010-11-23 Bdale Garbeemake sure all silk elements are within board outline
2010-11-23 Bdale Garbeeadd outline layer, center ground plane polygon
2010-11-18 Bdale Garbeelose C9 as redundant on this tight layout
2010-11-18 Bdale Garbeeupdate to reflect footprint name change
2010-11-11 Bdale Garbeemore copper shoving to reduce impedance in the pyro...
2010-11-11 Bdale Garbeecomponent move to improve bypass capacitor placement...
2010-11-11 Bdale Garbeefix reset circuit component values to match TeleMetrum...
2010-11-10 Bdale Garbeeno remaining DRC errors
2010-11-09 Bdale Garbeeroute complete, 16 DRC errors
2010-11-08 Bdale GarbeeThis is a TeleNano but with dual deployment .. calling...