descriptionUSB true (hardware) random number generator
ownerBdale Garbee
last changeMon, 27 Jun 2016 16:54:57 +0000 (09:54 -0700)
2016-06-27 Keith PackardShove components and traces to provide 0.4mm clearance... master v1.0
2016-05-19 Keith PackardInclude docs for seeed build
2016-05-19 Keith PackardRespond to seeed DFM report
2016-04-04 Keith PackardReplace SoC footprint (again). Make all vias the same... v0.5
2016-03-09 Keith PackardSwitch LED current-limit resistor to 220Ω
2016-03-07 Keith PackardSwap STM footprint for fewer edges. Fix mask on LDO...
2016-02-21 Keith PackardSwitch 1uF cap to 35V part
2016-02-08 Keith PackardAdd red LED v0.4
2016-02-08 Keith PackardUse smaller traces for signal runs
2016-02-08 Keith PackardG6 part has pin 18 as VDDIO2, not GPIO
2016-01-20 Keith PackardResize J6 name on PCB
2016-01-19 Keith PackardAdd outline bits to USB connector slots
2016-01-19 Keith PackardAdd force-flash pin. Move components to preferred-parts.
2016-01-19 Keith PackardSwitch to 28-pin QFN process. Rework for tiny box.
2016-01-18 Keith PackardRemove spurious comma from transistor mfg part number
2016-01-18 Keith PackardFix attributes to build complete parts list
8 years ago v1.0
8 years ago v0.5 run another half dozen through...
8 years ago v0.4
9 years ago fab-dual-source-1.0 Fabricated at oshpark on 2014-12-24
8 years ago master
9 years ago lqfp-32
9 years ago high-voltage
9 years ago dual-source