fw/altos
7 years agoaltos: Configure telefire SPI and LEDs correctly
Keith Packard [Fri, 24 Aug 2012 07:46:55 +0000 (00:46 -0700)]
altos: Configure telefire SPI and LEDs correctly

This places the telefire SPI bus on USART1 option 2 and
marks the various LED functions with symbolic names.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: telelaunch doesn't need ao_radio_cmac_init
Keith Packard [Fri, 24 Aug 2012 07:44:35 +0000 (00:44 -0700)]
altos: telelaunch doesn't need ao_radio_cmac_init

This function was used to initialize the LCO functions, which were
moved to ao_lco.c a few commits back, so ao_radio_cmac_init doesn't
even exist anymore.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Get ao_pad.c working on telefire v0.1
Keith Packard [Fri, 24 Aug 2012 07:42:32 +0000 (00:42 -0700)]
altos: Get ao_pad.c working on telefire v0.1

Monitor all four channels, allow any channel to be fired.
Turn on power LED at startup time.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Split out LCO functions from ao_radio_cmac.c to ao_lco.c
Keith Packard [Fri, 24 Aug 2012 07:40:27 +0000 (00:40 -0700)]
altos: Split out LCO functions from ao_radio_cmac.c to ao_lco.c

These functions are not used in the telelaunch or telefire nodes, so
don't force them to be included.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Have radio_cmac turn on LEDs as appropriate
Keith Packard [Fri, 24 Aug 2012 07:39:46 +0000 (00:39 -0700)]
altos: Have radio_cmac turn on LEDs as appropriate

Use AO_LED_RX and AO_LED_TX defines if present to control LEDs during
radio operations.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add 'ao_led_set_mask' in the PCA9922 driver
Keith Packard [Fri, 24 Aug 2012 07:34:55 +0000 (00:34 -0700)]
altos: Add 'ao_led_set_mask' in the PCA9922 driver

This lets a subset of the LEDs be controlled independent of other LED settings.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Make cc1111 SPI pins configurable
Keith Packard [Fri, 24 Aug 2012 07:33:38 +0000 (00:33 -0700)]
altos: Make cc1111 SPI pins configurable

Allow either USART in any configuration. Still only supports one SPI
bus though.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Disable telefire 'pad' listener when testing radio
Keith Packard [Fri, 24 Aug 2012 07:27:13 +0000 (00:27 -0700)]
altos: Disable telefire 'pad' listener when testing radio

Ensures that the radio testing won't block waiting for a firing mode
packet to arrive.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Check for JRE 1.7 in Windows installer
Keith Packard [Sun, 19 Aug 2012 17:02:16 +0000 (10:02 -0700)]
altosui: Check for JRE 1.7 in Windows installer

altosui runs fine with version 1.7 (on Linux at least), so allow that
version to satisfy the java check instead of requiring the user to
down-grade to 1.6

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoHere's the button driver and event queue logic
Keith Packard [Sun, 19 Aug 2012 05:51:47 +0000 (22:51 -0700)]
Here's the button driver and event queue logic

These were neglected in the commit which was supposed to include them

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add MMA655X driver
Keith Packard [Sun, 19 Aug 2012 04:26:34 +0000 (21:26 -0700)]
altos: Add MMA655X driver

Just debug code at this point, will complete on real hardware

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/cc1111: Document SPI bus pin options
Keith Packard [Sun, 19 Aug 2012 04:25:34 +0000 (21:25 -0700)]
altos/cc1111: Document SPI bus pin options

Just a comment in the source code about which pins each option selects.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Use split SPI bus for MS5607 sensor
Keith Packard [Sun, 19 Aug 2012 04:24:16 +0000 (21:24 -0700)]
altos: Use split SPI bus for MS5607 sensor

Leave CS low while releasing the SPI bus when waiting for conversion
complete -- other SPI bus users will use another set of pins.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Allow STM SPI bus on multiple pin sets
Keith Packard [Sun, 19 Aug 2012 04:21:58 +0000 (21:21 -0700)]
altos: Allow STM SPI bus on multiple pin sets

This allows multiple STM pin groups to be used for each SPI
bus. Useful for the MS5607 sensor which signals conversion complete on
the MISO line.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoao-send-telem: make --realtime work
Mike Beattie [Tue, 7 Aug 2012 19:07:49 +0000 (07:07 +1200)]
ao-send-telem: make --realtime work

(add "break;" to the case statement for options)

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Mike Beattie [Tue, 7 Aug 2012 18:49:15 +0000 (06:49 +1200)]
Merge branch 'master' of git://git.gag.com/fw/altos

7 years agoMerge remote-tracking branch 'mjb/master'
Keith Packard [Tue, 7 Aug 2012 18:48:20 +0000 (11:48 -0700)]
Merge remote-tracking branch 'mjb/master'

7 years agoMerge branch 'master' of git://git.gag.com/fw/altos
Mike Beattie [Tue, 7 Aug 2012 18:46:56 +0000 (06:46 +1200)]
Merge branch 'master' of git://git.gag.com/fw/altos

7 years agoAdd ao-send-telem to .gitignore
Mike Beattie [Tue, 7 Aug 2012 18:45:03 +0000 (06:45 +1200)]
Add ao-send-telem to .gitignore

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoaltos: Fix .sdcdbrc file for telebt-v0.1
Keith Packard [Tue, 7 Aug 2012 18:32:16 +0000 (11:32 -0700)]
altos: Fix .sdcdbrc file for telebt-v0.1

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Oops. Serial 1 stdin was busted by typo
Keith Packard [Tue, 7 Aug 2012 18:30:47 +0000 (11:30 -0700)]
altos: Oops. Serial 1 stdin was busted by typo

A typo in the symbol used to enable stdin wakeups from serial1 caused
the input to pend until some other wakeup occurred.

This also makes the serial1 hw flow control pin selects in config 2
work right, although those aren't used by any current product

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add button driver and event queue
Keith Packard [Tue, 7 Aug 2012 05:53:52 +0000 (22:53 -0700)]
altos: Add button driver and event queue

With this, a single task can wait for any button or quadrature input
device.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Support multiple quadrature encoders.
Keith Packard [Tue, 7 Aug 2012 04:54:58 +0000 (21:54 -0700)]
altos: Support multiple quadrature encoders.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Fix up quadrature driver
Keith Packard [Tue, 7 Aug 2012 03:20:32 +0000 (20:20 -0700)]
altos: Fix up quadrature driver

Mostly works now, should work reliably with a bit of input filtering.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoSigned-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 7 Aug 2012 02:35:02 +0000 (19:35 -0700)]
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Test quadrature driver

7 years agoaltos: Add quadrature driver
Keith Packard [Tue, 7 Aug 2012 02:34:34 +0000 (19:34 -0700)]
altos: Add quadrature driver

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add ao_gpio_get and ao_exti_set_mode
Keith Packard [Tue, 7 Aug 2012 02:33:44 +0000 (19:33 -0700)]
altos: Add ao_gpio_get and ao_exti_set_mode

Needed to support general GPIO interrupts

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Build ao_kalman.h from cc1111 subdirs as needed
Keith Packard [Sun, 5 Aug 2012 21:58:40 +0000 (14:58 -0700)]
altos: Build ao_kalman.h from cc1111 subdirs as needed

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoAdjust service to be persistent.
Mike Beattie [Sun, 26 Feb 2012 09:30:09 +0000 (22:30 +1300)]
Adjust service to be persistent.

* Run as a foreground service -> high priority
* Notification set to display as "Ongoing".

Changed logo to be in colour at keithp's request. Greyscale logos still present as *_g.png

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agomove from Debian packaged sdcc to new cc1111 package forked from 2.9.0-5
Bdale Garbee [Mon, 11 Jun 2012 02:04:24 +0000 (20:04 -0600)]
move from Debian packaged sdcc to new cc1111 package forked from 2.9.0-5

7 years agosrc/cc1111: Enable SPI slave mode
Keith Packard [Sun, 5 Aug 2012 19:17:25 +0000 (12:17 -0700)]
src/cc1111: Enable SPI slave mode

This is untested...

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agosrc/cc1111: Allow serial0 without serial1
Keith Packard [Sun, 5 Aug 2012 19:16:25 +0000 (12:16 -0700)]
src/cc1111: Allow serial0 without serial1

The ao_serial_speed structure is needed by serial0 too.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agosrc/cc1111: Add ao_gpio_set macro
Keith Packard [Sun, 5 Aug 2012 19:15:36 +0000 (12:15 -0700)]
src/cc1111: Add ao_gpio_set macro

Allows general GPIO-using code to run on cc1111

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Move 'implements Runnable' from AltosSerial to AltosLink
Keith Packard [Sun, 5 Aug 2012 05:58:48 +0000 (22:58 -0700)]
altosui: Move 'implements Runnable' from AltosSerial to AltosLink

AltosLink is the class providing the 'run' method, after all...

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoReduce size of textview.
Mike Beattie [Thu, 2 Aug 2012 11:38:26 +0000 (23:38 +1200)]
Reduce size of textview.

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoAltosDroid: Begin re-working Bluetooth code
Mike Beattie [Thu, 2 Aug 2012 10:09:24 +0000 (22:09 +1200)]
AltosDroid: Begin re-working Bluetooth code

* Move to using explicit 'magic' UUID, rather than java reflection
* Re-work UI to make it more useful for testing
* Use Insecure RFCOMM only, and remove code that differentiates.

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoFix min/target SDK versions
Mike Beattie [Thu, 2 Aug 2012 09:20:23 +0000 (21:20 +1200)]
Fix min/target SDK versions

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoMerge branch 'master' of ssh://mjb@git.ethernal.org/~/git/altos
Mike Beattie [Thu, 2 Aug 2012 09:18:15 +0000 (21:18 +1200)]
Merge branch 'master' of ssh://mjb@git.ethernal.org/~/git/altos

7 years agoRe-work external lib support for newer Android SDK
Mike Beattie [Thu, 2 Aug 2012 09:16:54 +0000 (21:16 +1200)]
Re-work external lib support for newer Android SDK

* Remove older *.properties methods of locating lib dir
* clean up Eclipse classpath file
* adjust Makefile.am to link AltosLib.jar into libs/

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoIgnore autogenerated file: altosui/Info.plist
Mike Beattie [Tue, 31 Jul 2012 08:05:35 +0000 (20:05 +1200)]
Ignore autogenerated file: altosui/Info.plist

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoDon't build ao-stmload if stlink is not available.
Mike Beattie [Tue, 31 Jul 2012 08:04:34 +0000 (20:04 +1200)]
Don't build ao-stmload if stlink is not available.

Signed-off-by: Mike Beattie <mike@ethernal.org>
7 years agoaltos: Add driver for STM internal flash
Keith Packard [Mon, 30 Jul 2012 02:48:08 +0000 (19:48 -0700)]
altos: Add driver for STM internal flash

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add telefire-v0.1
Keith Packard [Mon, 30 Jul 2012 02:44:56 +0000 (19:44 -0700)]
altos: Add telefire-v0.1

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add software AES implementation
Keith Packard [Mon, 30 Jul 2012 02:42:53 +0000 (19:42 -0700)]
altos: Add software AES implementation

This is untested

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/cc1111: Fix serial 0 option 2 pins definitions
Keith Packard [Mon, 30 Jul 2012 02:36:50 +0000 (19:36 -0700)]
altos/cc1111: Fix serial 0 option 2 pins definitions

tx/rx are 4/5, rts/cts are 2/3

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Remove duplicate values from info table. Add altitude
Keith Packard [Mon, 30 Jul 2012 02:35:15 +0000 (19:35 -0700)]
altosui: Remove duplicate values from info table. Add altitude

No need to have state/call/serial/flight data, those are all in the
header. Having altitude makes Monitor Idle slightly more useful.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Handle Monitor Idle errors better
Keith Packard [Mon, 30 Jul 2012 02:34:00 +0000 (19:34 -0700)]
altosui: Handle Monitor Idle errors better

Deal with missing data by checking for MISSING in more places.
Handle serial communication failures during send by reporting back
from libaltos.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoAdd ability to re-play telemetry through TeleDongle
Keith Packard [Sun, 29 Jul 2012 23:22:23 +0000 (16:22 -0700)]
Add ability to re-play telemetry through TeleDongle

This adds a new command to TeleDongle to send arbitrary data, and then
creates a new tool, 'ao-send-telem' that replays existing telemetry
files through TeleDongle.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Move ao_radio_cmac.c to core (it doesn't depend on hardware)
Keith Packard [Sun, 22 Jul 2012 22:18:27 +0000 (15:18 -0700)]
altos: Move ao_radio_cmac.c to core (it doesn't depend on hardware)

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Move AltosIgnite.java to altoslib
Keith Packard [Sun, 22 Jul 2012 18:53:44 +0000 (11:53 -0700)]
altosui: Move AltosIgnite.java to altoslib

To be shared with altosdroid eventually

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agotools: Use pkgconfig to find stlink for ao-stmload
Keith Packard [Fri, 20 Jul 2012 19:04:17 +0000 (12:04 -0700)]
tools: Use pkgconfig to find stlink for ao-stmload

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoAdd stlink pinout
Keith Packard [Fri, 20 Jul 2012 18:08:22 +0000 (11:08 -0700)]
Add stlink pinout

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Delay starting KML output for flight and GPS coords
Keith Packard [Thu, 19 Jul 2012 16:46:20 +0000 (09:46 -0700)]
altosui: Delay starting KML output for flight and GPS coords

Don't start outputing KML data until the telem record containing
flight number and GPS coordinates are present.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agotelescience: correctly calculating rate values with higher resolution
Robert Garbee [Thu, 19 Jul 2012 00:41:00 +0000 (18:41 -0600)]
telescience: correctly calculating rate values with higher resolution

7 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Robert Garbee [Wed, 18 Jul 2012 20:25:27 +0000 (14:25 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

7 years agoICP3 working
Robert Garbee [Wed, 18 Jul 2012 20:24:05 +0000 (14:24 -0600)]
ICP3 working

7 years agoTimer 3 working with slower clock and all 16 bits.
Robert Garbee [Wed, 18 Jul 2012 19:41:27 +0000 (13:41 -0600)]
Timer 3 working with slower clock and all 16 bits.

7 years agoaltosdroid: Start adding an AltosLink subclass for android
Keith Packard [Wed, 18 Jul 2012 07:03:54 +0000 (00:03 -0700)]
altosdroid: Start adding an AltosLink subclass for android

Will talks over bluetooth while providing an AltosLink APi

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Make scan UI handle incremental telem data
Keith Packard [Wed, 18 Jul 2012 07:01:51 +0000 (00:01 -0700)]
altosui: Make scan UI handle incremental telem data

The new telem format doesn't send everything in each telem packet, so
we need to handle updating information incrementally in the scan
results. This involved clearing old scan data when switching
frequencies and then updating existing entries with new data as it arrives.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Toggling telemetry monitoring would replay the telem queue
Keith Packard [Wed, 18 Jul 2012 06:59:13 +0000 (23:59 -0700)]
altos: Toggling telemetry monitoring would replay the telem queue

Using the 'm' command to turn telem off and back on would end up going
around the whole telemetry queue replaying everything there as the
wait loop would exit when disabling monitoring even if the ring was empty.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: With debug cables disconnected, CC1120 seems happy at +16dBm
Keith Packard [Wed, 18 Jul 2012 04:06:07 +0000 (21:06 -0700)]
altos: With debug cables disconnected, CC1120 seems happy at +16dBm

Let's see how it goes...

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Accept variations in spacing for igniter status reply
Keith Packard [Wed, 18 Jul 2012 04:04:58 +0000 (21:04 -0700)]
altosui: Accept variations in spacing for igniter status reply

Megametrum uses different white space; just deal with it here.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltoslib: Move idle monitor managing code to altoslib
Keith Packard [Wed, 18 Jul 2012 04:04:23 +0000 (21:04 -0700)]
altoslib: Move idle monitor managing code to altoslib

More stuff to be shared (potentially)

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Megametrum ADC values are 12 bits, discard low 4 for telemetry
Keith Packard [Wed, 18 Jul 2012 03:44:55 +0000 (20:44 -0700)]
altos: Megametrum ADC values are 12 bits, discard low 4 for telemetry

We've only got space for 8 bits for the ADC values for pyro channels,
discard the low 4 bits instead of the low 8 bits.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltoslib: Don't use MISSING values in max computations
Keith Packard [Wed, 18 Jul 2012 03:43:31 +0000 (20:43 -0700)]
altoslib: Don't use MISSING values in max computations

Early telemetry state may be missing critical data, don't use MISSING
values in computing max ranges.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltoslib: Fix MM conversion functions
Keith Packard [Wed, 18 Jul 2012 03:42:42 +0000 (20:42 -0700)]
altoslib: Fix MM conversion functions

Pressure is already reported in Pa, no need to convert that.
Voltage divider computations were backwards.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agofirst work on PWM input to TeleScience, 'p' command displays timer 1
Robert Garbee [Tue, 17 Jul 2012 19:23:48 +0000 (13:23 -0600)]
first work on PWM input to TeleScience, 'p' command displays timer 1

7 years agoaltos: Place STM config values at fixed addresses for re-use
Keith Packard [Tue, 17 Jul 2012 08:24:52 +0000 (01:24 -0700)]
altos: Place STM config values at fixed addresses for re-use

Just like cc1111, stick the serial number and radio calibration values
at known fixed addresses so that when re-flashing the board, we can go
find the existing values.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoAdd ao-stmload tool
Keith Packard [Tue, 17 Jul 2012 08:18:45 +0000 (01:18 -0700)]
Add ao-stmload tool

This loads an ELF image through the STlink programming interface using
the stlink utility library

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Skip unknown data when parsing ADC for idle monitoring
Keith Packard [Mon, 16 Jul 2012 22:36:20 +0000 (15:36 -0700)]
altosui: Skip unknown data when parsing ADC for idle monitoring

This resolves an infinite loop when talking to megametrum.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Move serial datastream parser to altoslib
Keith Packard [Mon, 16 Jul 2012 22:35:11 +0000 (15:35 -0700)]
altosui: Move serial datastream parser to altoslib

instead of having it in altosui

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: megametrum depends on ao_companion.h
Keith Packard [Mon, 16 Jul 2012 22:34:01 +0000 (15:34 -0700)]
altos: megametrum depends on ao_companion.h

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Enable pyro channel control in telepyro
Keith Packard [Mon, 16 Jul 2012 22:32:26 +0000 (15:32 -0700)]
altos: Enable pyro channel control in telepyro

This should make the board actually work now.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add manual firing command for extra pyro channels
Keith Packard [Mon, 16 Jul 2012 22:30:29 +0000 (15:30 -0700)]
altos: Add manual firing command for extra pyro channels

In parallel with the existing igniter commands, this tests the
programmable pyro channels

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Use 'HAS_ORIENT' to enable orientation selection in pyro code
Keith Packard [Mon, 16 Jul 2012 22:27:58 +0000 (15:27 -0700)]
altos: Use 'HAS_ORIENT' to enable orientation selection in pyro code

Don't expose orientation options when no orientation data is available

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Pass flight dynamics to companion boards
Keith Packard [Mon, 16 Jul 2012 22:25:47 +0000 (15:25 -0700)]
altos: Pass flight dynamics to companion boards

Necessary for TelePyro

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Make ao_tick_count visible
Keith Packard [Mon, 16 Jul 2012 22:24:21 +0000 (15:24 -0700)]
altos: Make ao_tick_count visible

Necessary to fetch it when interrupts are already disabled as we can't
call ao_time then.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Remove some debug code from avr ADC driver
Keith Packard [Mon, 16 Jul 2012 22:21:21 +0000 (15:21 -0700)]
altos: Remove some debug code from avr ADC driver

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Make sure telepyro ao_product.h is built before .o files
Keith Packard [Mon, 16 Jul 2012 22:18:12 +0000 (15:18 -0700)]
altos: Make sure telepyro ao_product.h is built before .o files

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Make storage addresses datatype configurable
Keith Packard [Mon, 16 Jul 2012 21:47:53 +0000 (14:47 -0700)]
altos: Make storage addresses datatype configurable

No sense using 32 bits for tiny hardware

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agosrc: Add driver for AVR internal eeprom. Use for telepyro config.
Keith Packard [Mon, 16 Jul 2012 21:44:40 +0000 (14:44 -0700)]
src: Add driver for AVR internal eeprom. Use for telepyro config.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: No space for pyro help on TP v0.1
Keith Packard [Mon, 16 Jul 2012 21:40:49 +0000 (14:40 -0700)]
altos: No space for pyro help on TP v0.1

AVR doesn't have enough ram to hold the help messages, and we can't
use them in flash.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Remove unused 'func' from ao_config_set
Keith Packard [Mon, 16 Jul 2012 21:39:05 +0000 (14:39 -0700)]
altos: Remove unused 'func' from ao_config_set

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/avr: Remove debugging command from USB driver
Keith Packard [Mon, 16 Jul 2012 21:37:58 +0000 (14:37 -0700)]
altos/avr: Remove debugging command from USB driver

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/avr: Remove debugging printf in avr stdio startup
Keith Packard [Mon, 16 Jul 2012 21:36:51 +0000 (14:36 -0700)]
altos/avr: Remove debugging printf in avr stdio startup

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agosrc: Add explicit 'pin' argument to ao_enable_output
Keith Packard [Sat, 14 Jul 2012 09:44:17 +0000 (02:44 -0700)]
src: Add explicit 'pin' argument to ao_enable_output

This lets the cc1111 use the atomic bit operation instead of a mask,
which is immune to interrupt issues as well as being a shorter code sequence.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/megametrum: Support the four additional pyro channels
Keith Packard [Sat, 14 Jul 2012 08:29:50 +0000 (01:29 -0700)]
altos/megametrum: Support the four additional pyro channels

These use the new pyro code to allow for some flexibility in programming.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/stm: Expose ao_gpio_set which sets a specific GPIO pin
Keith Packard [Sat, 14 Jul 2012 08:28:55 +0000 (01:28 -0700)]
altos/stm: Expose ao_gpio_set which sets a specific GPIO pin

Will need versions for other architectures

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agostm: running out of memory in MM -- reduce stack to 668 bytes
Keith Packard [Sat, 14 Jul 2012 08:28:31 +0000 (01:28 -0700)]
stm: running out of memory in MM -- reduce stack to 668 bytes

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos: Add arbitrary pyro channel support
Keith Packard [Sat, 14 Jul 2012 08:26:38 +0000 (01:26 -0700)]
altos: Add arbitrary pyro channel support

Programmed by specifying a conjunction of flight conditions that
trigger the igniter to fire.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltos/stm: Force STM stack to start at the top of RAM
Keith Packard [Sat, 14 Jul 2012 08:24:14 +0000 (01:24 -0700)]
altos/stm: Force STM stack to start at the top of RAM

Using a fixed size means crashing if there's not enough space for
that, or wasting memory if there's too much.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Abstract remote connection timeout stuff
Keith Packard [Thu, 12 Jul 2012 02:15:32 +0000 (19:15 -0700)]
altosui: Abstract remote connection timeout stuff

This moves some of the logic for managing when to present the 'cancel'
dialog for remote operations to altoslib.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 years agoaltosui: Remove a bunch of debugging printfs
Keith Packard [Wed, 11 Jul 2012 21:28:53 +0000 (14:28 -0700)]
altosui: Remove a bunch of debugging printfs

These aren't useful at this point.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoReport RSSI values in monitor idle UI (trac #44)
Keith Packard [Wed, 11 Jul 2012 20:53:30 +0000 (13:53 -0700)]
Report RSSI values in monitor idle UI (trac #44)

This adds a new 's' command to TeleDongle to report RSSI value from last
received packet, and then has AltosUI request that value when closing
the remote link.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoaltos: Fix gcc compiler warnings in GPS code
Keith Packard [Wed, 11 Jul 2012 20:52:32 +0000 (13:52 -0700)]
altos: Fix gcc compiler warnings in GPS code

unused variables and mis-matches in printf format codes.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoaltos: Create macros to convert from/to radio RSSI representation
Keith Packard [Wed, 11 Jul 2012 20:50:56 +0000 (13:50 -0700)]
altos: Create macros to convert from/to radio RSSI representation

AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI.

Removes a bunch of open-coded versions of the same function.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoaltos: Have 'make clean' remove all programs, even old ones
Keith Packard [Wed, 11 Jul 2012 20:49:26 +0000 (13:49 -0700)]
altos: Have 'make clean' remove all programs, even old ones

This makes sure that changing version numbers doesn't leave old
compiled output lying around.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoaltos: remove optimization for 'help' that confuses cc1111 compiler
Keith Packard [Wed, 11 Jul 2012 20:47:25 +0000 (13:47 -0700)]
altos: remove optimization for 'help' that confuses cc1111 compiler

The cc1111 compiler gets this very wrong and prints piles of garbage

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoAdd megametrum outline to doc dir
Keith Packard [Wed, 11 Jul 2012 20:40:54 +0000 (13:40 -0700)]
Add megametrum outline to doc dir

And install it alongside telemetrum-outline

Signed-off-by: Keith Packard <keithp@keithp.com>
8 years agoaltos: Ignore megametrum built files
Keith Packard [Wed, 11 Jul 2012 20:40:07 +0000 (13:40 -0700)]
altos: Ignore megametrum built files

Signed-off-by: Keith Packard <keithp@keithp.com>