altosui: Add config and pyro tabs to graph widget

[fw/altos] / src / telemega-v0.1 / ao_pins.h

diff --git a/src/telemega-v0.1/ao_pins.h b/src/telemega-v0.1/ao_pins.h
index 7ccc6085ba1b49139dcf1c6ba164304a2393b19f..c16b33a03975475c34076cfa911f11bceb346c6e 100644 (file)
--- a/src/telemega-v0.1/ao_pins.h
+++ b/src/telemega-v0.1/ao_pins.h
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +19,6 @@
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
-#define HAS_TASK_QUEUE         1
 
 /* 8MHz High speed external crystal */
 #define AO_HSE                 8000000
@@ -68,6 +68,7 @@
 #define AO_CONFIG_MAX_SIZE                     1024
 #define LOG_ERASE_MARK                         0x55
 #define LOG_MAX_ERASE                          128
+#define AO_LOG_FORMAT                          AO_LOG_FORMAT_TELEMEGA
 
 #define HAS_EEPROM             1
 #define USE_INTERNAL_FLASH     0
@@ -75,6 +76,10 @@
 #define USE_STORAGE_CONFIG     0
 #define HAS_USB                        1
 #define HAS_BEEP               1
+#define BEEPER_TIMER           3
+#define BEEPER_CHANNEL         1
+#define BEEPER_PORT            (&stm_gpioc)
+#define BEEPER_PIN             6
 #define HAS_BATTERY_REPORT     1
 #define HAS_RADIO              1
 #define HAS_TELEMETRY          1
@@ -163,9 +168,6 @@
 /* Number of general purpose pyro channels available */
 #define AO_PYRO_NUM    4
 
-#define AO_IGNITER_SET_DROGUE(v)       stm_gpio_set(AO_IGNITER_DROGUE_PORT, AO_IGNITER_DROGUE_PIN, v)
-#define AO_IGNITER_SET_MAIN(v)         stm_gpio_set(AO_IGNITER_MAIN_PORT, AO_IGNITER_MAIN_PIN, v)
-
 /*
  * ADC
  */
@@ -180,7 +182,7 @@ struct ao_adc {
 };
 
 #define AO_ADC_DUMP(p) \
-       printf("tick: %5u A: %5d B: %5d C: %5d D: %5d drogue: %5d main: %5d batt: %5d pbatt: %5d temp: %5d\n", \
+       printf("tick: %5lu A: %5d B: %5d C: %5d D: %5d drogue: %5d main: %5d batt: %5d pbatt: %5d temp: %5d\n", \
               (p)->tick, \
               (p)->adc.sense[0], (p)->adc.sense[1], (p)->adc.sense[2], \
               (p)->adc.sense[3], (p)->adc.sense[4], (p)->adc.sense[5], \
@@ -261,6 +263,12 @@ struct ao_adc {
 #define AO_BATTERY_DIV_PLUS    56      /* 5.6k */
 #define AO_BATTERY_DIV_MINUS   100     /* 10k */
 
+/*
+ * Voltage divider on ADC pyro battery sampler
+ */
+#define AO_PYRO_BATTERY_DIV_PLUS       100     /* 100k */
+#define AO_PYRO_BATTERY_DIV_MINUS      27      /* 27k */
+
 /*
  * Voltage divider on ADC igniter samplers
  */
@@ -346,6 +354,7 @@ struct ao_adc {
  */
 
 #define HAS_MMA655X            1
+#define AO_MMA655X_INVERT      0
 #define AO_MMA655X_SPI_INDEX   AO_SPI_1_PE13_PE14_PE15
 #define AO_MMA655X_CS_PORT     (&stm_gpiod)
 #define AO_MMA655X_CS_PIN      4