first cut at turnon scripts for EasyTimer v2

[fw/altos] / src / kernel / ao_storage.h

diff --git a/src/kernel/ao_storage.h b/src/kernel/ao_storage.h
index 59b137ad8e792a7976cc5875c3bf1bbc12331102..ff8548eb150d71bb73a92ddf4457e7079a7a760f 100644 (file)
--- a/src/kernel/ao_storage.h
+++ b/src/kernel/ao_storage.h
@@ -31,18 +31,26 @@
 typedef ao_storage_pos_t ao_pos_t;
 
 /* Total bytes of available storage */
-extern __pdata ao_pos_t        ao_storage_total;
+#ifndef ao_storage_total
+extern ao_pos_t        ao_storage_total;
+#endif
 
 /* Block size - device is erased in these units. At least 256 bytes */
-extern __pdata ao_pos_t        ao_storage_block;
+#ifndef ao_storage_block
+extern ao_pos_t        ao_storage_block;
+#endif
 
 #ifndef USE_STORAGE_CONFIG
 #define USE_STORAGE_CONFIG 1
 #endif
 
+#ifndef AO_STORAGE_ERASED_BYTE
+#define AO_STORAGE_ERASED_BYTE 0xff
+#endif
+
 #if USE_STORAGE_CONFIG
 /* Byte offset of config block. Will be ao_storage_block bytes long */
-extern __pdata ao_pos_t        ao_storage_config;
+extern ao_pos_t        ao_storage_config;
 
 #define ao_storage_log_max     ao_storage_config
 #else
@@ -50,27 +58,35 @@ extern __pdata ao_pos_t     ao_storage_config;
 #endif
 
 /* Storage unit size - device reads and writes must be within blocks of this size. Usually 256 bytes. */
-extern __pdata uint16_t ao_storage_unit;
+#ifndef ao_storage_unit
+extern uint16_t ao_storage_unit;
+#endif
 
 /* Initialize above values. Can only be called once the OS is running */
 void
-ao_storage_setup(void) __reentrant;
+ao_storage_setup(void);
 
 /* Write data. Returns 0 on failure, 1 on success */
 uint8_t
-ao_storage_write(ao_pos_t pos, __xdata void *buf, uint16_t len) __reentrant;
+ao_storage_write(ao_pos_t pos, void *buf, uint16_t len);
 
 /* Read data. Returns 0 on failure, 1 on success */
 uint8_t
-ao_storage_read(ao_pos_t pos, __xdata void *buf, uint16_t len) __reentrant;
+ao_storage_read(ao_pos_t pos, void *buf, uint16_t len);
 
 /* Erase a block of storage. This always clears ao_storage_block bytes */
 uint8_t
-ao_storage_erase(ao_pos_t pos) __reentrant;
+ao_storage_erase(ao_pos_t pos, uint32_t len);
+
+/* Check storage starting at pos to see if the chunk there
+ * is erased
+ */
+uint8_t
+ao_storage_is_erased(uint32_t pos);
 
 /* Flush any pending writes to stable storage */
 void
-ao_storage_flush(void) __reentrant;
+ao_storage_flush(void);
 
 /* Initialize the storage code */
 void
@@ -82,11 +98,15 @@ ao_storage_init(void);
 
 /* Read data within a storage unit */
 uint8_t
-ao_storage_device_read(ao_pos_t pos, __xdata void *buf, uint16_t len) __reentrant;
+ao_storage_device_read(ao_pos_t pos, void *buf, uint16_t len);
 
 /* Write data within a storage unit */
 uint8_t
-ao_storage_device_write(ao_pos_t pos, __xdata void *buf, uint16_t len) __reentrant;
+ao_storage_device_write(ao_pos_t pos, void *buf, uint16_t len);
+
+/* Erase device from pos through pos + ao_storage_block */
+uint8_t
+ao_storage_device_erase(uint32_t pos);
 
 /* Initialize low-level device bits */
 void
@@ -94,6 +114,6 @@ ao_storage_device_init(void);
 
 /* Print out information about flash chips */
 void
-ao_storage_device_info(void) __reentrant;
+ao_storage_device_info(void);
 
 #endif /* _AO_STORAGE_H_ */