first cut at turnon scripts for EasyTimer v2

[fw/altos] / src / drivers / ao_mr25.c

diff --git a/src/drivers/ao_mr25.c b/src/drivers/ao_mr25.c
index 53cbf9d7eaa6143c1fdf76df4e017544143c318d..86dda22a9b9937fa5a54925e74e98715fcec8de8 100644 (file)
--- a/src/drivers/ao_mr25.c
+++ b/src/drivers/ao_mr25.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,16 +19,16 @@
 #include "ao.h"
 
 /* Total bytes of available storage */
-__pdata uint32_t       ao_storage_total;
+uint32_t       ao_storage_total;
 
 /* Block size - device is erased in these units. At least 256 bytes */
-__pdata uint32_t       ao_storage_block;
+uint32_t       ao_storage_block;
 
 /* Byte offset of config block. Will be ao_storage_block bytes long */
-__pdata uint32_t       ao_storage_config;
+uint32_t       ao_storage_config;
 
 /* Storage unit size - device reads and writes must be within blocks of this size. Usually 256 bytes. */
-__pdata uint16_t       ao_storage_unit;
+uint16_t       ao_storage_unit;
 
 /*
  * MRAM is entirely random access; no erase operations are required,
@@ -50,7 +51,7 @@ __pdata uint16_t      ao_storage_unit;
 #define MR25_STATUS_BP_SHIFT   (2)
 #define MR25_STATUS_WEL                (1 << 1)        /* Write enable latch */
 
-static __xdata uint8_t ao_mr25_mutex;
+static uint8_t ao_mr25_mutex;
 
 /*
  * This little array is abused to send and receive data. A particular
@@ -60,7 +61,7 @@ static __xdata uint8_t ao_mr25_mutex;
  * those last three bytes.
  */
 
-static __xdata uint8_t ao_mr25_instruction[4];
+static uint8_t ao_mr25_instruction[4];
 
 #define MR25_SELECT()          ao_spi_get_mask(AO_MR25_SPI_CS_PORT,(1 << AO_MR25_SPI_CS_PIN),AO_MR25_SPI_BUS, AO_SPI_SPEED_FAST)
 #define MR25_DESELECT()                ao_spi_put_mask(AO_MR25_SPI_CS_PORT,(1 << AO_MR25_SPI_CS_PIN),AO_MR25_SPI_BUS)
@@ -92,7 +93,7 @@ ao_mr25_set_address(uint32_t pos)
  * Erase the specified sector (no-op for MRAM)
  */
 uint8_t
-ao_storage_erase(uint32_t pos) __reentrant
+ao_storage_erase(uint32_t pos) 
 {
        if (pos >= ao_storage_total || pos + ao_storage_block > ao_storage_total)
                return 0;
@@ -103,7 +104,7 @@ ao_storage_erase(uint32_t pos) __reentrant
  * Write to flash
  */
 uint8_t
-ao_storage_device_write(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
+ao_storage_device_write(uint32_t pos, void *d, uint16_t len) 
 {
        if (pos >= ao_storage_total || pos + len > ao_storage_total)
                return 0;
@@ -127,7 +128,7 @@ ao_storage_device_write(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
  * Read from flash
  */
 uint8_t
-ao_storage_device_read(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
+ao_storage_device_read(uint32_t pos, void *d, uint16_t len) 
 {
        if (pos >= ao_storage_total || pos + len > ao_storage_total)
                return 0;
@@ -146,7 +147,7 @@ ao_storage_device_read(uint32_t pos, __xdata void *d, uint16_t len) __reentrant
 }
 
 void
-ao_storage_flush(void) __reentrant
+ao_storage_flush(void) 
 {
 }
 
@@ -156,7 +157,7 @@ ao_storage_setup(void)
 }
 
 void
-ao_storage_device_info(void) __reentrant
+ao_storage_device_info(void) 
 {
        printf ("Detected chips 1 size %d\n", ao_storage_total >> 8);
 }