first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / telemini.inc

diff --git a/doc/telemini.inc b/doc/telemini.inc
index 03732b2af2ac4ee03d7dfed70845d42aeabc6b47..97bca72b462e7529998299b7430dd0884dd84218 100644 (file)
--- a/doc/telemini.inc
+++ b/doc/telemini.inc
@@ -38,16 +38,16 @@
                |Apogee pyro channel connection to pyro circuit
 
                |2
-               |Apogee +
-               |Apogee pyro channel common connection to battery +
+               |Apogee +++
+               |Apogee pyro channel common connection to battery +++
 
                |3
                |Main -
                |Main pyro channel connection to pyro circuit
 
                |4
-               |Main +
-               |Main pyro channel common connection to battery +
+               |Main +++
+               |Main pyro channel common connection to battery +++
 
                |Left
                |Switch Output
@@ -136,8 +136,8 @@
                callsign settings are, you can temporarily force it
                back to the original default values (frequency
                434.550MHz, callsign N0CALL) by connecting a wire
-               between hole 3 and hole 7 on the debug connector. Hole
-               3 has the square pad around it, hole 7 is the one
+               between hole 3 and hole 6 on the debug connector. Hole
+               3 has the square pad around it, hole 6 is the one
                nearest the MS5607 baro sensor, which is a rectangular
                component with a metal cap that has two holes in it.