first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / telemetrum-outline.txt

diff --git a/doc/telemetrum-outline.txt b/doc/telemetrum-outline.txt
index ab6871f93c2562b5b8763bd4d4120a21757cb9d5..a57c3621c4a405aef5932487c8e52567d9d53cc6 100644 (file)
--- a/doc/telemetrum-outline.txt
+++ b/doc/telemetrum-outline.txt
@@ -1,9 +1,12 @@
-= TeleMetrum Outline and Hole Pattern
+:notitle:
 :doctype: article
 
+== TeleMetrum Outline and Hole Pattern
        This image, when printed, provides a precise template for the
        mounting holes in TeleMetrum. TeleMetrum has overall dimensions of
-       1.000 x 2.750 inches, and the mounting holes are sized for use
-       with 4-40 or M3 screws.
+       1.000 x 2.750 inches, and the mounting holes are 0.125 inches from
+       three of the board edges, and 0.375 inches from the screw terminal 
+       end.  That means they are in a rectangle measuring 0.750 x 2.250
+       inches, sized for use with 4-40 or M3 screws.
 
        image::telemetrum.svg[align="center"]