altos/test: Adjust CRC error rate after FEC fix

[fw/altos] / doc / telelaunch-troubleshooting.inc

diff --git a/doc/telelaunch-troubleshooting.inc b/doc/telelaunch-troubleshooting.inc
index 57ef2d4436e215259efbe2810b9213cf0c839211..d44d043b4392a11aa4f6a2bf267de2f74560d7b5 100644 (file)
--- a/doc/telelaunch-troubleshooting.inc
+++ b/doc/telelaunch-troubleshooting.inc
@@ -1,6 +1,25 @@
 [appendix]
 == Troubleshooting
 
+       === TeleFire Fails to Arm
+
+               If turning the TeleLCO key switch from "SAFE" to "ARM" does
+               not cause the selected TeleFire box to start flashing and
+               sounding its siren, the most likely cause is that the 
+               TeleFire box was left with the local safe/arm switch in the
+               safe position.  The Remote Arm LED on TeleLCO shows the state
+               of the safe/arm switch on the currently selected TeleFire box
+               and can be used to confirm this situation.
+
+               Note that in a cross-bank drag race configuration, any TeleFire
+               boxes involved in the drag race that are fully armed will
+               launch, while any TeleFire boxes involved in the drag race
+               that are not fully armed will not launch.  Pay attention to
+               make sure all involved TeleFire boxes are flashing their
+               strobe lights and sounding their sirens before launch to
+               ensure all desired rockets will actually participate in such
+               a drag race.
+
        === Radio Signal Strength
 
                Each unit in the TeleLaunch system has a debugging feature
@@ -21,8 +40,11 @@
                mounting arrangements, and so forth with more granularity than
                provided by the red/amber/green operational LED indicators.
 
-               The system is good down to about -100dBm, and it takes about 
-               6dB to double the range.  So a reading of -84dBm means that you
+               The system is good down to below -100dBm, and it takes about 
+               6dB to double the range.  So a reading of -80dBm means that you
                could extend the distance between the units by a factor of
                10 before losing the link.  Note, however, that real world
-               range is affected by terrain, vegetation, etc.
+               range is affected by terrain, vegetation, etc.  And you really
+               don't ever want to be operating close to the minimum signal
+               threshold!  Keep the RF signal indicators green with good
+               antenna choices and installations for maximum satisfaction.