first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / telelaunch-configuration.inc

diff --git a/doc/telelaunch-configuration.inc b/doc/telelaunch-configuration.inc
index 0e553405ba6ad2f3373e2204f911567c3bd38962..a24776331a09818cece9e6cdfb77b7e78a1a0ec0 100644 (file)
--- a/doc/telelaunch-configuration.inc
+++ b/doc/telelaunch-configuration.inc
@@ -1,6 +1,6 @@
 == Configuration
 
-       There are 3 things you need to configure identically in each unit
+       There are three things you need to configure identically in each unit
        that is part of a TeleLaunch system for wireless communications to
        succeed.  Those are the operating frequency, the callsign, and a key
        for the AES encryption algorithm.  Additionally, each TeleFire unit
@@ -59,9 +59,13 @@
                memory.  For example, the default 435.750 MHz would be 
                configured using
 
-                       c f 435750 +
+                       c F 435750 +
                        c w
 
+               Note that the 'f' parameter is a frequency calibration value
+               that you really, really, really don't want to change.  So, 
+               please be careful to make sure you use capital 'F', not lower
+               case 'f' when changing the operating frequency!
 
        === Callsign
 
@@ -115,7 +119,7 @@
 
                Each TeleFire unit needs to be configured with a bank number,
                and bank numbers should be unique within a given system.  For
-               most systems with 8 or less banks, just use the DIP switch
+               most systems with 8 or fewer banks, just use the DIP switch
                on the circuit board inside the TeleFire unit to select the
                desired bank.  Only one switch should be turned on.  Switch
                one means bank one, etc.