first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / easymini-device.inc

diff --git a/doc/easymini-device.inc b/doc/easymini-device.inc
index fb2b6098879f9b95f66f14ca94dbcae4e32bd827..841f7a3ee6a7966a58ddba1ee8bb63104478f68b 100644 (file)
--- a/doc/easymini-device.inc
+++ b/doc/easymini-device.inc
@@ -1,7 +1,7 @@
 == EasyMini
 
        .EasyMini Board
-       image::easymini-top.jpg[width="5.5in"]
+       image::easymini-top.jpg[width=400]
 
        EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
        designed to fit in a 24mm coupler tube.
@@ -31,11 +31,11 @@
                |Main pyro channel connection to pyro circuit
              
                |Top 2
-               |Main +
-               |Main pyro channel common connection to battery +
+               |Main +++
+               |Main pyro channel common connection to battery +++
              
                |Top 3
-               |Battery +
+               |Battery +++
                |Positive external battery terminal
              
                |Top 4
@@ -47,8 +47,8 @@
                |Apogee pyro channel connection to pyro circuit
              
                |Bottom 2
-               |Apogee +
-               |Apogee pyro channel common connection to battery +
+               |Apogee +++
+               |Apogee pyro channel common connection to battery +++
              
                |Bottom 3
                |Switch Output
@@ -94,9 +94,11 @@
                ground, connect it to the negative external battery
                connection, top terminal 4.
 
-               Connecting the positive battery terminal to the pyro
+               Connecting the switched positive battery terminal to the pyro
                charges must be done separate from EasyMini, by soldering
-               them together or using some other connector.
+               them together or using some other connector.  Note that for
+               safety, you must put a switch between the pyro battery and
+               the rest of the circuit!
 
                The other lead from each pyro charge is then inserted into
                the appropriate per-pyro channel screw terminal (top