first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / easymini-device.inc

diff --git a/doc/easymini-device.inc b/doc/easymini-device.inc
index b7af82f2ee8f28506e650c454cff7d3afe289cc5..841f7a3ee6a7966a58ddba1ee8bb63104478f68b 100644 (file)
--- a/doc/easymini-device.inc
+++ b/doc/easymini-device.inc
@@ -31,11 +31,11 @@
                |Main pyro channel connection to pyro circuit
              
                |Top 2
-               |Main +
-               |Main pyro channel common connection to battery +
+               |Main +++
+               |Main pyro channel common connection to battery +++
              
                |Top 3
-               |Battery +
+               |Battery +++
                |Positive external battery terminal
              
                |Top 4
@@ -47,8 +47,8 @@
                |Apogee pyro channel connection to pyro circuit
              
                |Bottom 2
-               |Apogee +
-               |Apogee pyro channel common connection to battery +
+               |Apogee +++
+               |Apogee pyro channel common connection to battery +++
              
                |Bottom 3
                |Switch Output
@@ -97,7 +97,7 @@
                Connecting the switched positive battery terminal to the pyro
                charges must be done separate from EasyMini, by soldering
                them together or using some other connector.  Note that for
-               safety, you should put a switch between the pyro battery and
+               safety, you must put a switch between the pyro battery and
                the rest of the circuit!
 
                The other lead from each pyro charge is then inserted into