first cut at turnon scripts for EasyTimer v2

[fw/altos] / doc / easymega.inc

diff --git a/doc/easymega.inc b/doc/easymega.inc
index a948aaae36cf8dee123ead07e44321319d78ef62..e7351c07d5aa045e2ec4c6ae3438b25d7322b1f8 100644 (file)
--- a/doc/easymega.inc
+++ b/doc/easymega.inc
@@ -1,7 +1,7 @@
 == EasyMega
 
        .EasyMega Board
-       image::easymega-v1.0-top.jpg[width=430]
+       image::easymega-v1.0-top.jpg[width=400]
 
        EasyMega is a 1¼ inch by 2¼ inch circuit board. It was
        designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -36,24 +36,24 @@
                |Main pyro channel connection to pyro circuit
 
                |Top 5
-               |Main +
-               |Main pyro channel common connection to battery +
+               |Main +++
+               |Main pyro channel common connection to battery +++
 
                |Top 6
                |Apogee -
                |Apogee pyro channel connection to pyro circuit
 
                |Top 7
-               |Apogee +
-               |Apogee pyro channel common connection to battery +
+               |Apogee +++
+               |Apogee pyro channel common connection to battery +++
 
                |Top 8
                |D -
                |D pyro channel connection to pyro circuit
 
                |Top 9
-               |D +
-               |D pyro channel common connection to battery +
+               |D +++
+               |D pyro channel common connection to battery +++
 
                |Bottom 1
                |GND
@@ -72,24 +72,24 @@
                |A pyro channel connection to pyro circuit
 
                |Bottom 5
-               |A +
-               |A pyro channel common connection to battery +
+               |A +++
+               |A pyro channel common connection to battery +++
 
                |Bottom 6
                |B -
                |B pyro channel connection to pyro circuit
 
                |Bottom 7
-               |B +
-               |B pyro channel common connection to battery +
+               |B +++
+               |B pyro channel common connection to battery +++
 
                |Bottom 8
                |C -
                |C pyro channel connection to pyro circuit
 
                |Bottom 9
-               |C +
-               |C pyro channel common connection to battery +
+               |C +++
+               |C pyro channel common connection to battery +++
                |====
 
        === Using a Separate Pyro Battery with EasyMega
@@ -97,9 +97,12 @@
                EasyMega provides explicit support for an external pyro
                battery. All that is required is to remove the jumper
                between the lipo terminal (Bottom 3) and the pyro terminal
-               (Bottom 2). Then hook the negative pyro battery terminal to ground
-               (Bottom 1) and the positive pyro battery to the pyro battery
-               input (Bottom 2). You can then use the existing pyro screw
+               (Bottom 2). Then hook the negative pyro battery terminal to 
+               ground (Bottom 1) and the switched positive pyro battery to 
+               the pyro battery input (Bottom 2). Note that you must include
+               a switch between the pyro battery and the board for safety,
+               as the on-board power switch circuit only supports the primary
+               battery!  You can then use the existing pyro screw
                terminals to hook up all of the pyro charges.
 
        === Using Only One Battery With EasyMega