]>
git.gag.com Git - fw/altos/log
Keith Packard [Sun, 28 Jan 2024 00:03:35 +0000 (16:03 -0800)]
altos/telelco-v3.0: Control LCD backlight with PWM
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Jan 2024 00:03:20 +0000 (16:03 -0800)]
altos: Add support for backlight control in ao_lco_bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 28 Jan 2024 00:01:20 +0000 (16:01 -0800)]
altos/stm32f1: For some reason the DBG registers aren't always available
Attempts to discover the device model during flash loading appear to fail
for unknown reasons. Switch to basing the memory page size on the total
memory size, which should be just as reliable.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 23:31:04 +0000 (15:31 -0800)]
altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz
Need enough bandwidth to run at 20MHz
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 23:30:27 +0000 (15:30 -0800)]
altos: Bump ST7565 speed to 20MHz
Go as fast as we can manage
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 01:35:43 +0000 (17:35 -0800)]
altos/telelco-v3.0: Add contrast setting
Provide a UI for setting the LCD contrast.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 01:35:21 +0000 (17:35 -0800)]
altos: Build TeleLCO v3.0 bits by default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 00:06:44 +0000 (16:06 -0800)]
telelco-v3.0: Minor setup fixes
Change beeper to lower tone. Switch LCD SPI to mode 3. Fix the
quadrature device ID.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 27 Jan 2024 00:05:45 +0000 (16:05 -0800)]
altos: Fix pretend pad range for TeleLCO
Off-by-one when setting up the pretend pads.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 26 Jan 2024 22:03:40 +0000 (14:03 -0800)]
altos: Add wiring docs to st-7565 header
Write down what worked today.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 26 Jan 2024 19:07:55 +0000 (11:07 -0800)]
altos: Add SPI bus parameter to ao_spi_speed
The stm32f1 series has two SPI busses and they operate from different
base clocks, so the computation of the clock divider to get a
particular frequency depends upon which SPI bus is being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 26 Jan 2024 18:59:19 +0000 (10:59 -0800)]
stm32f1: make spi speed per-bus
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 26 Jan 2024 18:57:56 +0000 (10:57 -0800)]
switch to mode 3 for LCD
Keith Packard [Wed, 24 Jan 2024 23:36:34 +0000 (15:36 -0800)]
src/stm32f1: Disable extra JTAG pins in ao_clock_init
Need to enable AFIO before trying to adjust bits there.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Jan 2024 04:57:38 +0000 (20:57 -0800)]
altos/telelco-v3.0: Use timer 2 for fast timer
We need timer 1 for PWM on the backlight
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Jan 2024 04:57:00 +0000 (20:57 -0800)]
altos/stm32f1: Support timers 2,3,4 for fast timer
Make the code deal with differences between timer 18 and 234
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 23:17:32 +0000 (16:17 -0700)]
altos/telelco-v3.0: Battery voltage is on PA2
Which is ADC input #2
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 23:16:58 +0000 (16:16 -0700)]
altos/telelco-v3.0: Don't connect PA6 to SPI
MISO is not used, and we need the pin for other stuff.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 22:12:34 +0000 (15:12 -0700)]
altos/stm32f1: Allow PA6 to be left alone in the SPI code
This is MISO, which the LCD driver doesn't use. Leave it alone so we
can use it for other stuff.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 22:11:06 +0000 (15:11 -0700)]
altos/stm32f1: Poke the ADC harder to get it to sample
The ADC requires a bunch of poking to get it started.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 07:49:00 +0000 (23:49 -0800)]
altos/stm32f1: Turn on ADC during initialization sequence
The ADC needs to be left 'on' so that it will actually
run the conversion sequence when started.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 00:27:33 +0000 (17:27 -0700)]
altos/telelco-v3.0: Add USB pull up
And move the ARM LED to PA9
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 00:26:12 +0000 (17:26 -0700)]
altos/stm32f1: Add STM_RCC_CFGR_PLLXTPRE_MASK value
Necessary when setting the PLLXTPRE value
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 00:24:32 +0000 (17:24 -0700)]
altos/stm32f1: Set PLLXTPRE value
This is the pre-PLL divider value which is needed when we want to
use a 16MHz crystal and a 72MHz sysclk
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jan 2024 00:22:57 +0000 (17:22 -0700)]
altos/stm32f1: Support beeper on tim3
Add a bit more flexibility to the beeper code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 04:13:04 +0000 (20:13 -0800)]
altos/telelco*: Make LCO voltage display work on 2.0 and 3.0
Fix up the common code to handle LCO voltage display via box 0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 03:57:03 +0000 (19:57 -0800)]
altos/telelco-v3.0: Fix up search UI
Present a progress bar. Show the detected box numbers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 03:14:03 +0000 (19:14 -0800)]
altos/telelco-v3.0: Add ao_adc_single usage to get battery voltage
Poll the ADC to acquire battery voltage data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 03:13:22 +0000 (19:13 -0800)]
altos/stm32f1: Add ao_adc_single support
This supports polling the ADC for values instead of having
them get dumped into a ring at a regular rate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 02:58:41 +0000 (18:58 -0800)]
altos: Move ao_adc_single.h API header to kernel/
THis was in stm, but will be needed by other architectures.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 01:05:34 +0000 (17:05 -0800)]
altos/telelco-v3.0: Add some real drawing stuff
This required enabling devices with 128kB flash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 00:48:43 +0000 (16:48 -0800)]
altos/telelco-v3.0: Use eeprom emulation for config storage
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 00:47:47 +0000 (16:47 -0800)]
altos/stm32f1: Add eeprom emulation using flash
Use the last 2kB of flash to emulate eeprom storage for TeleLCO. This should
also be useful for EasyMega.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 00:21:40 +0000 (16:21 -0800)]
altos: Add initial TeleLCO-v3 bits
This might light up some of the hardware...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 00:20:42 +0000 (16:20 -0800)]
altos: Build in 'draw' directory first
This makes various font bits for targets using graphics
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 8 Jan 2024 00:20:18 +0000 (16:20 -0800)]
altos/stm32f1: Add ao_fast_timer.c
Needed for TeleLCO
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jan 2024 07:24:13 +0000 (23:24 -0800)]
altos/telelco-v3: Move USB pullup from PA9 to PA10
Production boards will have the pull-up on PA10, and Bdale will hack
up the protos to match so we don't have to have separate firmware.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 7 Jan 2024 22:55:53 +0000 (15:55 -0700)]
fix product name
Keith Packard [Sun, 7 Jan 2024 07:16:23 +0000 (23:16 -0800)]
altos/telelco-v3: Create initial flash loader setup
Copied from easymega-v3 with USB pull-up moved to PA9. Note this
assumes the proto boards will have a resistor fitted there, which is
not in the artwork.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 30 Mar 2023 07:46:36 +0000 (00:46 -0700)]
altos/easymega-v3.0: Switch to STM32F103
For some reason, there was easymega v3.0 firmware sitting here, but
it was mostly a copy of easymega v2.0 bits. Fix that to support the
current design based on the STM32F103 SoC.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 30 Mar 2023 07:45:17 +0000 (00:45 -0700)]
drivers: Add real i2c support to mmc5983
It only had bit-banging i2c support; go ahead
and add "real" i2c support for EasyMega v3
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 30 Mar 2023 07:05:21 +0000 (00:05 -0700)]
altos/stm32f1: Add more IP block drivers
adc, beep, exti, i2c
Also hooked up data sampling bits in ao_timer.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Mar 2023 17:24:36 +0000 (10:24 -0700)]
altos: Fix up stm32f103-nucleo 'lco' demo mode
Adjust some layout now that I've got a real screen to play with.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Mar 2023 17:23:05 +0000 (10:23 -0700)]
altos: Clean up st7565 LCD driver
Get rid of AO_ prefix on chip-specific register values.
Declare ao_st7565_instructions to take const uint8_t * so
it can accept an array in flash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 9 Mar 2023 01:14:56 +0000 (17:14 -0800)]
altos/stm32f103-nucleo: Draw more of the LCO demo screen
Add the box/pad screen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:54:39 +0000 (15:54 -0800)]
altos/stm32f103-nucleo: Drive a screen too
Use the ST7565 driver to control an LCD screen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:53:58 +0000 (15:53 -0800)]
altos/stm32f1: Add DMA and SPI drivers
These came from the code for the stm32l15 chips
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:53:03 +0000 (15:53 -0800)]
altos/driver: Document setting for AO_ST7565_BIAS
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:52:11 +0000 (15:52 -0800)]
altos/draw: Have each font declare ao_glyph_temp as .comm
Create temporary glyph drawing space by having every glyph declare how
much space it needs and letting the linker allocate the largest
possible space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:50:57 +0000 (15:50 -0800)]
altos/draw: Skip line adjustment for vertical/horizontal
When e3 is zero, don't adjust the minor position based on
the major as it doesn't move.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:50:19 +0000 (15:50 -0800)]
altos/draw: Build demos with -O3 to catch more bugs
The compiler fails to do a lot of checks in -O0
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:49:52 +0000 (15:49 -0800)]
src/draw: Provide some useful constants
The two colors and a stride macro
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 8 Mar 2023 23:14:53 +0000 (15:14 -0800)]
altos: Add ST7565 LCD driver
This is the chip used by various NewHaven LCD displays
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Feb 2023 06:41:48 +0000 (22:41 -0800)]
altos/stm32f103-nucleo: Add boot loader
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Feb 2023 03:24:11 +0000 (19:24 -0800)]
stm32f1: Get boot loader working
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2023 00:29:56 +0000 (16:29 -0800)]
altos/stm32f1: Start work on self-flash code
Looks like this uses the same IP block as the stm32f0 series; copied
the code, haven't gotten it working yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Feb 2023 23:45:29 +0000 (15:45 -0800)]
altos/stm32f103-nucleo: Use more bits
Get the OS running, use the serial for console
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 19 Feb 2023 23:44:32 +0000 (15:44 -0800)]
altos/stm32f1: More stm32f103 work
Serial driver works
Interrupts work
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Feb 2023 07:02:16 +0000 (23:02 -0800)]
altos: Start work on stm32f1 support
Got clocks working. CPU now running at 72MHz.
Got systick timer working. Ticks at 100Hz.
Got GPIO working. LED blinks.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 26 Feb 2023 06:40:29 +0000 (22:40 -0800)]
ao-tools: Add flash utility for stm32f1x chips
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 30 Jan 2024 20:33:22 +0000 (12:33 -0800)]
altos/lpc: Adjust ADC clock from 450kHz to 4.5MHz
A missing zero. Also, let products change this value if desired to
improve high-impedence performance.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 1 Feb 2024 01:47:08 +0000 (17:47 -0800)]
Fix configure tests for multi-arch libaltos
libaltos builds now require a long list of compilers. Check for all of them
before enabling it when building in auto mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 22 Jan 2024 23:15:44 +0000 (16:15 -0700)]
kernel: conditionalize config "report in feet" on presence of baro sensor
Keith Packard [Sun, 7 Jan 2024 06:09:41 +0000 (22:09 -0800)]
altos/easytimer-v2: Initialize logging too
Now that the logging bits are all written, let's turn it on.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jan 2024 06:08:54 +0000 (22:08 -0800)]
altos: Updating pyro format tried to copy entries with no value
Need to check for NO_VALUE before attempting to copy data, otherwise
things will go badly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jan 2024 06:07:29 +0000 (22:07 -0800)]
altos/samd21: Enable stdio for USB by default
samd21 usb driver didn't bother to enable stdio for USB for some
reason.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jan 2024 01:06:58 +0000 (17:06 -0800)]
altos/easytimer-v2: Update comments in flash loader ao_pins.h
No code changes, but the comments were wrong.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jan 2024 01:03:30 +0000 (17:03 -0800)]
altos/easytimer-v2: Add logging bits
32-byte records with all data in a single record instead of
separate volt/sensor bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Mar 2023 17:30:24 +0000 (10:30 -0700)]
altos: Build easytimer-v2 bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Mar 2023 17:29:10 +0000 (10:29 -0700)]
altos: Initial easytimer-v2 bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Mar 2023 17:25:19 +0000 (10:25 -0700)]
altos: Use BMI088 as z-axis accel as needed
When there's no high-g accel available, use the 'along' axis
to measure acceleration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 11 Dec 2023 21:44:54 +0000 (13:44 -0800)]
fixup seven segment debug code
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 16 Nov 2023 16:28:44 +0000 (09:28 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 16 Nov 2023 16:28:21 +0000 (09:28 -0700)]
add a paragraph about how to hook up a pressure sensor to an EasyMotor
Keith Packard [Tue, 10 Oct 2023 18:24:45 +0000 (11:24 -0700)]
micropeak: Include firmware in install bits
These are useful for people building their own hardware.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Oct 2023 18:19:54 +0000 (11:19 -0700)]
doc: Use -optimize with asciidoctorpdf
This does some additional compression on the output to make it
smaller.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 30 Aug 2023 17:52:44 +0000 (11:52 -0600)]
update Releasing with learnings from 1.9.17 release
Bdale Garbee [Thu, 20 Jul 2023 18:02:36 +0000 (12:02 -0600)]
doc: fix a typo in the staging example
Keith Packard [Wed, 30 Aug 2023 16:15:28 +0000 (09:15 -0700)]
Version 1.9.17
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 30 Aug 2023 16:12:34 +0000 (09:12 -0700)]
doc: Release notes for 1.9.17
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 30 Aug 2023 16:27:39 +0000 (10:27 -0600)]
ao-bringup: be consistent with success text in TeleGPS test script
Bdale Garbee [Mon, 28 Aug 2023 17:44:40 +0000 (11:44 -0600)]
ao-test-igniter: allow anything other than 'open' to be valid so LED tests work
Keith Packard [Fri, 4 Aug 2023 18:54:10 +0000 (11:54 -0700)]
altos: Use ublox-10 mode for TM v4.0
This will only work on a hacked board with a swapped GPS unit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 22 Jul 2023 07:01:03 +0000 (00:01 -0700)]
altos: Use pyro voltage to check igniters
Instead of using an absolute value for the igniter continuity good
voltage, use 15/16 of the pyro voltage instead. This ensures we scale
with the pyro voltage to find marginal igniters even with high voltage
pyro systems.
This doesn't work on TeleMetrum where we have no pyro voltage
value. On these boards, continue to use a fixed 3.5V value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 22 Jul 2023 07:00:12 +0000 (00:00 -0700)]
altos: Don't include ao_pyro.h into telelco code
This isn't used at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 22 Jul 2023 06:59:07 +0000 (23:59 -0700)]
altos: Add pyro voltage divider values to boards with them
EasyMega and TeleMega have separate measurement circuits for pyro
battery voltages, provide the resistor values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 22 Jul 2023 06:19:06 +0000 (23:19 -0700)]
altos: Compute igniter good/bad thresholds using 3.5V value
Instead of requiring each product to set the ADC values for good/bad
igniters, compute them based upon a 3.5V value using the ADC
characteristics already present in ao_pins.h.
This changes the threshold used on LPC parts from 400 (0.189V) to
7388.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 13 Jun 2023 06:15:36 +0000 (23:15 -0700)]
altos/stmf0: Disable ao_boot_check_pin if not in use
This allows rebuilding the boot loader without boot pin support (as
required to debug TeleMini) by only editing ao_pins.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 13 Jun 2023 06:13:29 +0000 (23:13 -0700)]
altos: Add AO_STACK_CANARY to detect stack overflows sometimes
Checks above and below the current task stack at each switch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 13 Jun 2023 06:11:01 +0000 (23:11 -0700)]
altos/stm32f042: Increase interrupt stack to 256 bytes
Running the radio on TeleMini in monitor idle mode ended up
overflowing the interrupt stack of 128 bytes. Increase to 256 bytes
and adjust task stack sizes so targets continue to build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 6 Jun 2023 21:57:53 +0000 (14:57 -0700)]
altoslib: Support Monitor Idle for EasyMini-3
Needed to explicitly support this target even though it was almost the
same as EasyMini v1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 May 2023 17:38:01 +0000 (10:38 -0700)]
altos-mapd: Install systemd dir in arch-independent location
Use $(bindir)/../lib instead of $(libdir) as the latter has the
arch-specific directory added.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 28 Apr 2023 06:35:28 +0000 (00:35 -0600)]
update Releasing based on 1.9.16 release experiences
Bdale Garbee [Fri, 28 Apr 2023 06:29:01 +0000 (00:29 -0600)]
have TeleGPS production script save RF cal value
Keith Packard [Fri, 28 Apr 2023 03:25:43 +0000 (20:25 -0700)]
Version 1.9.16
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 28 Apr 2023 05:11:30 +0000 (22:11 -0700)]
altosdroid: Deal with Google requiring API version 31
Need to add some magic constants to the build.
Need to support BLUETOOTH_SCAN permission.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 27 Apr 2023 00:08:09 +0000 (18:08 -0600)]
update TeleGPS v3.0 production script to flash correct firmware versions
Keith Packard [Wed, 26 Apr 2023 23:08:38 +0000 (16:08 -0700)]
Add TeleGPS v3.0 firmware
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 26 Apr 2023 23:04:21 +0000 (16:04 -0700)]
doc: Add 1.9.16 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 26 Apr 2023 23:06:42 +0000 (17:06 -0600)]
add production scripts for TeleGPS v3.0