]>
git.gag.com Git - fw/altos/log
Keith Packard [Wed, 17 Jun 2015 06:40:34 +0000 (23:40 -0700)]
altoslib: Let the application disable the link cancel dialog
This lets the application control whether to pop up the cancel dialog
when the link isn't working.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 17 Jun 2015 06:38:07 +0000 (23:38 -0700)]
altoslib: Set product for idle monitor
This lets the UI show the product name
Signed-off-by: Keith Packard <keithp@keithp.com>
Robert Garbee [Sat, 13 Jun 2015 23:40:59 +0000 (17:40 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Robert Garbee [Sat, 13 Jun 2015 23:40:16 +0000 (17:40 -0600)]
add beep when test completes
Keith Packard [Sun, 7 Jun 2015 03:37:53 +0000 (20:37 -0700)]
altosdroid: Resource changes needed for multi-tracker mode
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jun 2015 03:37:27 +0000 (20:37 -0700)]
altosdroid: Note recent changes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jun 2015 03:36:18 +0000 (20:36 -0700)]
altosdroid: Add multi-tracker support
This lets you view multiple trackers in the offline maps tab (online
maps not done yet), saves state of each tracker to preferences.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 7 Jun 2015 03:35:32 +0000 (20:35 -0700)]
altoslib: Add preferences for saving/restoring multiple flight states
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Jun 2015 13:00:43 +0000 (06:00 -0700)]
ao-tools: Add missing ao-cal-freq man page
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Jun 2015 05:52:51 +0000 (22:52 -0700)]
ao-bringup: Do telegps freq cal before testing GPS
This lets the GPS get some time to see sats while we're messing with
the radio frequency calibration.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Jun 2015 05:52:21 +0000 (22:52 -0700)]
ao-bringup: Use new ao-cal-freq program for cal-freq script
Remove shell script bits that were unreliable.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 6 Jun 2015 05:17:02 +0000 (22:17 -0700)]
ao-tools: Create ao-cal-freq
Create C-based frequency calibration program to replace shell script
which isn't reliable.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 2 Jun 2015 19:48:42 +0000 (12:48 -0700)]
altosdroid: Highlight age in red when older than 10 seconds
This lets you quickly identify stale data
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 1 Jun 2015 06:09:18 +0000 (23:09 -0700)]
altosdroid: Switch from custom title to standard Holo theme
This gives us the menu button, which is awfully useful on devices
without a hardware version...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 16:49:30 +0000 (09:49 -0700)]
altoslib: Require 'debug' hook in AltosMapInterface
This lets the map users redirect debug messages as appropriate
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 16:43:58 +0000 (09:43 -0700)]
altosdroid: use 'show' to set new tab contents in onResume
Hook onResume so that newly created/recreated tabs get current
contents. The set_visible hook isn't sufficient for that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 16:42:58 +0000 (09:42 -0700)]
altosdroid: Missing call to super.onDetach from TabMapOffline
Causes an exception when you shut down the application.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 05:13:39 +0000 (22:13 -0700)]
altosdroid: Split out AltosMapView into separate file
This lets us use the regular layout configuration bits in the .xml
file instead of needing to patch the map object into the display. That
was causing problems when re-entering the map tab as the map view
would somehow end up with a zero width.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 05:12:26 +0000 (22:12 -0700)]
altosdroid: Add 'Current Location' as an option when preloading maps
This lets you load maps around your current location, in case your
favorite launch site isn't in the list.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 05:08:51 +0000 (22:08 -0700)]
altosdroid: Save selected map type in AltosDroid object
The map tabs may not have been created when the map type was selected,
so save the desired type in the main application object.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 05:06:55 +0000 (22:06 -0700)]
altosdroid: Disable debug output on release builds
We generate an awful lot of debug spew to the log; presumably that's
not helping performance, so lose that for release builds.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2015 05:05:36 +0000 (22:05 -0700)]
altosdroid: Look for zipalign in the new place too
This build tool moved for some reason...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 08:05:18 +0000 (01:05 -0700)]
altosdroid: Add map types and map preloading UIs
This adds an ugly dialog to select which maps to preload, and also
adds the ability to display other map types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 08:01:23 +0000 (01:01 -0700)]
altoslib: Pass all map loader params to set_load_params
Add zoom and map type to the param list so we don't call set_zoom and
set_maptype separately, which only causes lots of extra image loads to
get started unnecessarily.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 08:00:47 +0000 (01:00 -0700)]
altosuilib: Eliminate extra MapCache in AltosUIMapPreloadNew
Use the cache from the map.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 08:00:22 +0000 (01:00 -0700)]
altosuilib: Get rid of AltosUIMapNew.set_load_params
This isn't needed anywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 06:14:09 +0000 (23:14 -0700)]
altosuilib: Switch to altoslib map loading code
Remove the map loading code from the UI bits and use the new altoslib
version instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 06:12:34 +0000 (23:12 -0700)]
altoslib: Add map loading helper class
This adds the AltosMapLoader class, which iterates over a sequence of
zoom levels and formats to get local copies of a desired launch site.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 06:11:58 +0000 (23:11 -0700)]
altoslib: Provide toString method for AltosLatLon
Makes printing them easier.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2015 05:43:53 +0000 (22:43 -0700)]
altoslib: Start with map empty
Don't load images from 0,0 for no good reason; wait until someone sets
a desired lat/lon
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 22:31:25 +0000 (15:31 -0700)]
altosuilib: Use altoslib site list loader
Removes the custom version and uses the shared code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 22:30:29 +0000 (15:30 -0700)]
altoslib: Add AltosLaunchSite bits
This asynchronously fetches the list of available launch sites from
the standard location and notifies the caller when finished.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 06:05:49 +0000 (23:05 -0700)]
altosdroid: Place icons on screen instead of drawing path
This makes drawing a bunch faster, and locating stuff on the screen easier.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 06:05:11 +0000 (23:05 -0700)]
altosdroid: Centralize debug printf code
Create AltosDebug to hold the debug code, use it everywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 06:02:43 +0000 (23:02 -0700)]
altosdroid: Move pause before reopening bluetooth into connec thread
This avoids stalling the UI while waiting for TBT to boot.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 27 May 2015 02:47:04 +0000 (19:47 -0700)]
altosdroid: Add offline map tab
It's not very fancy yet, but it does zoom and pan, and show the path
of the rocket with a line.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 08:04:00 +0000 (01:04 -0700)]
altosuilib: Get rid of AltosUIVersion.java
It's been moved to altoslib/AltosVersion.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 07:56:17 +0000 (00:56 -0700)]
altosuilib: Remove old map bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 07:46:21 +0000 (00:46 -0700)]
altosuilib: Use new map code for map preload UI
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 07:33:02 +0000 (00:33 -0700)]
altosuilib: Add AltosUIImage.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 07:29:53 +0000 (00:29 -0700)]
altoslib/altosuilib: Get new Map display code running in altosui and telegps
Looks like the display is all hooked up. Still need to replace the
preload UIs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 03:34:05 +0000 (20:34 -0700)]
altoslib/altosuilib: Update library version to 7
So many ABI/API changes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 03:33:28 +0000 (20:33 -0700)]
altoslib: More frobbing with new map bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 26 May 2015 03:10:37 +0000 (20:10 -0700)]
altoslib: Get new abstract mapping code compiling
Not useful yet, but at least it compiles now?
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 23:35:23 +0000 (16:35 -0700)]
altoslib: Build AltosVersion.java in configure.ac
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 23:26:01 +0000 (16:26 -0700)]
altos/telelco: Show box voltage with pad knob instead of firing button
Turn left past '1' and see the firing box battery voltage instead of
pushing the firing button with the box disarmed. This seems like a
safer UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 22:49:21 +0000 (15:49 -0700)]
altos/telelco: Display telefire battery voltage
When the firing button is pressed while unarmed, show the telefire
battery voltage in the display.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 22:47:46 +0000 (15:47 -0700)]
altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 20:23:54 +0000 (13:23 -0700)]
telefire: Report telefire battery voltage over telemetry link
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 00:28:07 +0000 (17:28 -0700)]
altos: Only set CMAC RSSI value on valid packet received
This ignores spurious packets for the purpose of showing the RSSI
value in telelco/telefire, avoiding warning about 'low RSSI' when the
radio receives noise.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 25 May 2015 00:25:25 +0000 (17:25 -0700)]
telefire: Make 'good' RSSI value configurable
Different radios will have different 'good' RSSI values, so let each
product configure it, leaving the default set to -90dBm, which is
a solid signal value for the CC1111.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 21 May 2015 20:49:28 +0000 (13:49 -0700)]
altoslib: Create display-independent map support code
This takes the swing-specific map code and creates a generic version.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:25:05 +0000 (10:25 -0700)]
Flip version to 1.6.0.2
Tag a version for development builds
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:23:09 +0000 (10:23 -0700)]
micropeak: Use fast load mode by default in -load script
Speed up flashing in default config
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:22:10 +0000 (10:22 -0700)]
microsplash: Add 'publish' target to Makefile
This dumps the resulting binary and -load script into the Binaries
directory of the altusmetrumllc repo
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:17:01 +0000 (10:17 -0700)]
altos: Support 32MHz xtal on cc1200
I ended up building some cc1200-based boards with 32MHz xtals, so just
make this an option when building the driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:16:10 +0000 (10:16 -0700)]
doc: Clarify what 'after motor' means
Note that this means after motor burn-out, not after motor start.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:14:43 +0000 (10:14 -0700)]
ao-dump-up: Add --wait option to make testing µPusb easier
The --wait option hangs around until a suitable device appears, so
that you can test a pile of µPusb devices without needing to
constantly interact with the command line.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:12:52 +0000 (10:12 -0700)]
altosui: Remove un-implemented --fetchmaps argument
This has been stubbed out for a while, so just remove it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 May 2015 17:09:22 +0000 (10:09 -0700)]
altoslib: Expose locale and non-locale floating point parsing functions
UI bits use locale-specific floating point formats, so parsing those
needs to use the locale. Network-based data, like .kml bits need to
use non-locale-specific parsing code, so now we've got both APIs
available, and each used as appropriate.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2015 17:52:24 +0000 (10:52 -0700)]
altoslib: Use Locale.ROOT for KML export
This avoids locale-specific number formatting, which breaks
googleearth when importing the resulting file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Apr 2015 05:29:45 +0000 (22:29 -0700)]
altosdroid: Fix tab label height problems
With a newer android API versions, we can set the indicator to a View
instead of just a string. This lets us wrap the desired string in a
TextView and show just that for the indicator, making it exactly the
right size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Apr 2015 04:20:22 +0000 (21:20 -0700)]
altosdroid: Add USB support for TeleDongle/TeleBT
This lets AltosDroid use a USB-connected receiver as well as Bluetooth devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 29 Mar 2015 19:10:47 +0000 (12:10 -0700)]
windows: Use new windows stub to launch applications
This avoids needing to locate javaw on the system while also making
the registry entries less fragile.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 29 Mar 2015 19:08:42 +0000 (12:08 -0700)]
icon: Convert windows stub into launcher program
Instead of an empty windows stub that exists only to hold icons, add
useful code that allows it to find and run the related java
application. This also adds more resources to that application to
provide more information to Windows too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 20 Mar 2015 22:09:20 +0000 (15:09 -0700)]
altos/stmf0: Have fast ADC ring buffer code use wrap-around
Instead of requiring that the whole set of returned values fit
precisely in the ring, allow for wrap-around so that we can fetch an
odd number of ADC values. The previous version required that the fetch
amount always be a factor of the ADC buffer size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 19 Mar 2015 08:12:24 +0000 (01:12 -0700)]
altos/chaoskey: Set USB VID/PID to 0x1d50/0x60c6
These are allocated from the OpenMoko USB vendor ID page and offer a
more 'official' number than from using the 0xfffe space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 19 Mar 2015 08:11:33 +0000 (01:11 -0700)]
altos: Add the ability to configure a different USB vendor ID
ChaosKey will use an OpenMoko vid/pid, so we need the ability to
configure a different USB vendor ID for each product.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Mar 2015 15:35:02 +0000 (09:35 -0600)]
ao-tools/ao-list: Show devices that have no TTY
chaoskey doesn't advertise itself as a modem, so the kernel doesn't
allocate a tty device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Mar 2015 15:34:01 +0000 (09:34 -0600)]
altos/test: Support old telemega eeprom file formats in ao_flight_test
The old eeprom format used different stoarge for the accel calibration
data, which doesn't matter to this code, but the change in the format
value does.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Mar 2015 15:32:20 +0000 (09:32 -0600)]
altos/test: Make aprs test code compile again
Adding the compressed/uncompressed config option broke the APRS test harness.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Mar 2015 15:30:53 +0000 (09:30 -0600)]
ao-tools/ao-mega: Clean up formatting of pyro status messages
There was an extra newline and missing space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 Mar 2015 15:29:52 +0000 (09:29 -0600)]
altosui: Add map to MonitorIdle display
Nice to be able to verify that maps are working by using this mode,
instead of needing to use flight monitoring.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Mar 2015 00:53:58 +0000 (16:53 -0800)]
altos/stmf0: Need ao_exti.h for pin configuration
Flash loader uses pin configuration to set up GPIOs for boot selection
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 8 Mar 2015 00:40:30 +0000 (16:40 -0800)]
altos: Add makefile for chaoskey flash loader
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Mar 2015 20:38:08 +0000 (12:38 -0800)]
altos: Build chaoskey by default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Mar 2015 20:36:57 +0000 (12:36 -0800)]
altos: Add .gitignore for chaoskey
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Mar 2015 20:33:36 +0000 (12:33 -0800)]
doc: Update telemetry docs to include new packet formats
Add TeleMega TeleMetrum v2 and companion data packet formats.
List which radio parts each product uses.
Document modulation parameters for new data rates.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Mar 2015 18:18:57 +0000 (10:18 -0800)]
altosdroid: Deal with bluetooth connection failures better
Remember when we've closed the bluetooth connection so that we stop
operations, including reporting connection status messages or even
starting a connection attempt.
Pass the AltosBluetooth object back in connection status messages so
that TelemetryService can tell when messages from closed objects get
delivered. There's a queue between the two, so the above fix catches
most of these instances, but not all of them.
Stick a delay during reconnect -- if the TeleBT device is getting
power-cycled, it will need a few seconds to reconfigure the device at
startup, if AltosDroid manages to connect during that time, the
configuration commands will be ignored.
Unlock the AltosBluetooth device while we connect so that cancel
calls will actually work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 06:23:22 +0000 (22:23 -0800)]
altosui/telegps: Change from variable-units snuck into master
show_units_name(double) only exists on the variable-units branch...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:16:06 +0000 (21:16 -0800)]
altos: Missing pad field in TMv2 data packet
The normal ARM padding would have filled this in correctly, but it's
best to be explicit about the structure.
This also adds a test to make sure the resulting telemetry declaration
is exactly 32 bytes,
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:11:33 +0000 (21:11 -0800)]
altos: Wait for BT disconnect before sending command
If AltosDroid manages to connect to the BT module before we've
configured it, we won't be able to talk to it as we can't force the
module to ignore connection attempts. Wait for AltosDroid to give up
and let us configure the device. Eventually, we'll manage, if
AltosDroid's delay interval is longer than the time it takes to
configure the unit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:08:44 +0000 (21:08 -0800)]
ao-tools: Add ao-flash-stm32f0x
This new script uses openocd to flash stm32f0x parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:06:51 +0000 (21:06 -0800)]
altoslib: Round frequency when configuring radio
This makes sure we set the right frequency, instead of being off by
1kHz on a regular basis...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:06:02 +0000 (21:06 -0800)]
altosui/telegps: Add config option for APRS format
Allow configuration of APRS compressed/uncompressed
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 Mar 2015 05:02:31 +0000 (21:02 -0800)]
altos: Make APRS format (compressed/uncompressed) configurable
This provides a choice of compressed vs uncompressed when sending APRS
packets to deal with receivers that still do not have support for the
more useful compressed format.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Mar 2015 00:06:23 +0000 (16:06 -0800)]
altos/usbtrng: Split out random number generating code to separate driver
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Mar 2015 00:04:00 +0000 (16:04 -0800)]
altos: Add chaoskey flash loader
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Mar 2015 00:02:17 +0000 (16:02 -0800)]
altos: Create chaoskey product
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Mar 2015 00:00:45 +0000 (16:00 -0800)]
altos/stmf0: Allocate USB buffers at startup
This lets the extra allocations used from ao_usb_alloc_buffers be
allocated before the first USB connection happens.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 1 Mar 2015 00:00:17 +0000 (16:00 -0800)]
altos/stmf0: Typo in ao_crc_stm.c
Extra semicolon
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Feb 2015 23:59:30 +0000 (15:59 -0800)]
altos/stmf0: Fix fast ADC interface
This was configuring the hardware wrong, and wasn't keeping the output
ring full.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 Feb 2015 23:07:16 +0000 (15:07 -0800)]
altos: Allow software to offer other USB interface classes than CDC
This lets some boards offer non-CDC class USB interfaces so that the
modem driver doesn't pick them up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 22 Feb 2015 21:55:40 +0000 (14:55 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Sun, 8 Feb 2015 16:29:01 +0000 (09:29 -0700)]
swap names so v3.0 is the default TeleDongle version to turn on
Keith Packard [Tue, 17 Feb 2015 06:22:37 +0000 (22:22 -0800)]
altosdroid: Ignore automatic tab changing while activity is saved
When the activity state is saved (after onSaveInstanceState()), we
can't update the UI until the activity is restarted or restored; that
means any UI changes we make, like switching tabs, must deal with this
by allowing those changes to be ignored, using commitAllowingStateLoss
instead of commit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 Feb 2015 05:35:34 +0000 (21:35 -0800)]
altosdroid: Missing file: DeviceAddress.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 Feb 2015 05:32:54 +0000 (21:32 -0800)]
altosdroid: Only speak when GUI is running
Create voice in onStart, stop it in onStop. This way, if some other
application is in use, the voice won't be annoying you.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 Feb 2015 05:19:09 +0000 (21:19 -0800)]
altosdroid: Explicitly disconnect BT on termination or 'disconnect'
This adds an explicit message to the telemetry service telling it when
to stop trying to talk to the bluetooth device. Until this message is
received, the service will reconnect to the specified BT device.
That message is sent when you 'quit' the application, or when you 'disconnect'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 Feb 2015 04:57:11 +0000 (20:57 -0800)]
altosdroid: Lots of bluetooth connection changes
Appears to more reliably abort in-progress connection attempts so you
can switch TBT devices without having the previous device in
operation.
Shows which device the connection is being attempted for.
Eliminate the 10-second timer and just disable the service when the GUI
shuts down while no BT connection is running.
Signed-off-by: Keith Packard <keithp@keithp.com>