+++ /dev/null
-altos (0.7.1+36+g811ced6) unstable; urgency=low
-
- [ Bdale Garbee ]
- * remove the csv build dep, as that code will be abandoned
-
- [ Keith Packard ]
- * altosui: Remove ability to graph data in .csv files
- * altosui: Separate out jfreechart and jcommon directories
-
- -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
-
-altos (0.7.1+32+g8103432) unstable; urgency=low
-
- * add build-dep on libcsv-java
-
- -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
-
-altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
-
- [ Bdale Garbee ]
- * make the column headers comma separated, too, so they align with the
- data
-
- [ Keith Packard ]
- * altosui: set default .csv file name in file save dialog
- * altosui: Remember directory containing firmware files
-
- [ Anthony Towns ]
- * Add graphing.
- * Add JFreeChart to Makefile.am
-
- [ Keith Packard ]
- * altosui: Use recorded ground acceleration when reading eeprom files
- * altosui: Write raw sensor data to .csv files
- * altosui: Factor some UI elements into separate classes
- * altosui: remove unused ReplayThread wrapper classes
- * altosui: Require 4 sats for 'good' GPS data
- * altosui: Create iterables for log file scanning. Split out display
- threads
- * altosui: .CSV output: add link quality, gps hdop and sat C/N0
- numbers
- * altosui: Deal with eeprom dates going backwards across wrap
-
- [ Anthony Towns ]
- * Hax0r graphing to support telem/eeprom files
-
- [ Keith Packard ]
- * altosui: use Altos constants in graphing code
-
- [ Anthony Towns ]
- * Add callsign/serial/flight to graph title
-
- [ Keith Packard ]
- * altosui: Add KML file export.
-
- [ Bdale Garbee ]
- * add build dep on jfreechart lib
-
- -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
-
-altos (0.7.1) unstable; urgency=low
-
- [ Keith Packard ]
- * Add firmware and libaltos to 'fat' target at top-level
- * altosui: Remove some debug printfs.
- * altosui: libaltos.so is built with libtool -- it's in
- ../libaltos/.libs
- * Add --with-fat-dir configure option to publish finished stand-alone
- bits
- * altosui: Fix telemetry file reader to handle tick count wrapping
- * altosui: Remove debug printfs from AltosTelemetryReader
- * altosui: Fill in time value of last Eeprom record read from file
- * altosui: Stop parsing eeprom file after hitting 'landed' state
-
- -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
-
-altos (0.7+96+g48f5799) unstable; urgency=low
-
- [ Keith Packard ]
- * altosui: conflating USB product and vendor IDs is a bad idea
-
- -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
-
-altos (0.7+94+g1ac3d7e) unstable; urgency=low
-
- * initial cut at an altosui man page
-
- -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
-
-altos (0.7+92+g0ea7576) unstable; urgency=low
-
- [ Bdale Garbee ]
- * handle versioning of ihx files (poorly) by just wildcarding the file
- name
-
- [ Keith Packard ]
- * altosui: Need to have JVM include path substituted into libaltos
- Makefile
- * altosui: Store libaltos.so in $(libdir)/altos
- * altosui: Display error dialog when AltOS JNI library can't be loaded
-
- -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
-
-altos (0.7+86+g6c0ae7e) unstable; urgency=low
-
- [ Keith Packard ]
- * altosui: Add explicit requirement to create classes directory
- * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
- ia64
- * altosui: hack to make JAVAROOT directory get created before javac
- runs
- * altosui: remove FATJAR from all-local to avoid building fat .jar
- file
-
- [ Bdale Garbee ]
- * add libtool to build deps
-
- [ Keith Packard ]
- * altosui: Add windows installer build using 'nsis'
- * altosui: ignore built files
- * altosui: oops. renamed the nsis file to altos-windows.nsi
- * icon: add some icons for application programs
- * altosui: Add icons to application and Windows menus.
- * Use autotools for altosui and libaltos
- * altos: add some SDCDB config files
- * Ignore libtool files.
- * Add version numbers to released files. Set version to 0.7.1
- * Add top-level 'fat' target to aid building distribution files
- * altosui: Fix windows installer to ship correct files
- * altosui: Fix up Mac OSX .zip file
- * altosui: Fix linux fat distribution
- * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
- * altosui: Remove debugging printf from AltosEepromReader
- * altosui: Eeprom files contain only one date; save it.
- * altosui: Add elevation and range data to main display
- * altosui: When replay thread is interrupted, don't make final report
- * altosui: Start idle thread after the rocket leaves the pad
- * altosui: Add AltosVoice.drain() to wait for queued speech to finish
- * altosui: Prevent voice altitude data from queueing up
- * altosui: Use local .class files in the classpath
- * altosui: Record flight number when scanning file, not when running
- * altosui: eeprom files place 'boost' time in the flight number
- record.
- * altosui: ensure that 'altosui' script is installed. Pass arguments
- along.
-
- -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
-
-altos (0.7+53+g59798c6) unstable; urgency=low
-
- [ Keith Packard ]
- * altosui: Abort flashing if debug port isn't working
- * altosui: allow flashing to be canceled from the rom config dialog
- * altosui: Hide internal rom config UI helper function
- * altosui: Remove some debug printfs from AltosRomconfig class
- * altosui: Post error dialog on invalid ROM config values.
- * altosui: build Mac OS .zip file to include paths
- * altosui: Report telemetry CRC errors in UI
- * altosui: Deal with altos bug setting radio channel while monitoring
- * altosui: Allow 'connect to device' when already connected
- * Revert "altosui: Deal with altos bug setting radio channel while
- monitoring"
- * altosui: Must flush serial line after configuring for telemetry
- * altosui: Catch I/O errors on telemetry device, report to user
-
- -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
-
-altos (0.7+40+g59a40f6) unstable; urgency=low
-
- [ Bdale Garbee ]
- * add distclean targets to libaltos and altosui to all Debian package
- to build, and clean up other distclean content as needed
-
- [ Keith Packard ]
- * altosui: missed AltosReader.class in the Makefile
- * altos: Bounds check Skytraq GPS tracking data array
- * altosui: Remove Manifest.txt from git repo as it's built now
-
- -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
-
-altos (0.7+28+gd006c5e) unstable; urgency=low
-
- * add runtime dependencies for altos binary package
-
- -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
-
-altos (0.7+26+gc35632e) unstable; urgency=low
-
- * don't build all the "fat" jar deliverables by default
-
- -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
-
-altos (0.7+23+g25764fc) unstable; urgency=low
-
- [ Bdale Garbee ]
- * fix up for an 0.7 release
- * update changelogs for Debian build
-
- [ Keith Packard ]
- * libaltos: AltusMetrum devices use more than one USB ID.
- * altosui: provide separate flush_input/flush_output for serial. deal
- with monitor automatically
- * altosui: discard invalid lines while reading Eeprom flight data
- * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
- * libaltos: Missing OS_LDFLAGS on cjnitest build
- * libaltos: cjnitest needs altos_flush now
- * altos: flush pending output when terminating packet mode
- * altos: Abort radio harder when terminating packet mode.
- * altos: shut down packet mode cleanly
- * libaltos: Fix windows build.
- * libaltos: Improve Makefile
- * Update telemetrum.inf to include all current USB ids.
- * libaltos: Add pre-built Mac OS X libaltos.dylib
- * libaltos: Add pre-built Windows .dll
- * altos: Windows sends USB Out packets of 0 length. Ack them.
- * libaltos: Use overlapped I/O on windows
- * altosui: Build linux, mac and windows archives on Linux
- * altosui: build debian-style altosui too
- * altosui: Devices with USB id 0x000a always get listed
-
- [ Bdale Garbee ]
- * continue even if rm's don't have anything to do
- * make invocation of 'install' pathless to work on more Unix variants
- * add a .gitattributes file, configuring the Mac and Windows binary
- library
-
- -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
-
-altos (0.7) unstable; urgency=low
-
- * update changelogs for Debian build
- * fix up for an 0.7 release
-
- -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
-
-altos (0.6+375+g0bd4cc0) unstable; urgency=low
-
- * fix path to installed shared library
-
- -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
-
-altos (0.6+373+gcf65c6b) unstable; urgency=low
-
- [ Keith Packard ]
- * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
- constants
- * altosui: Capture config and version info in .eeprom files
- * altosui: Merge gps date and time classes into gps class
- * altosui: Clear displayed data rows as needed.
- * altosui: Split status and info panels into separate files
- * altosui: Explicitly initialize Altos class
- * altosui: Split flight record out of telemetry class
- * altosui: Compute flight state from eeprom data
- * altosui: Add comments to Eeprom reader
- * altos: add callsign to packet mode, increase payload to 64 bytes
- * altosui: Start adding code to write csv files from eeprom/telem
- files
- * ao-dumplog: add --channel option (for use with -R option)
- * libaltos: integrate Windows support.
- * altosui: Select devices by USB vendor/product ID.
- * altos: Define USB product ID in per-product Makefile.defs file
- * altosui: Make teledongle callsign configurable
- * altosui: Add TeleMetrum configuration
- * altosui: Set callsign when fetching eeprom data over the air
-
- [ Bdale Garbee ]
- * add freetts as a build dep
- * working on java packaging details
-
- [ Keith Packard ]
- * altosui: Add .ihx file reading code and stub out flashing UI
- * altosui: Add debug dongle API, split flash UI out
- * ao-dumplog: Fix --remote and --channel options to actually work
- * altosui: pad TM config dialog values to avoid clipping descenders
- * libaltos: use pipe to wake up getchar on close. use mutexes
- * altosui: Add lots more cc1111 debug interface functions
- * altosui: remove debug printf from AltosHexfile
- * altosui: flush serial output before waiting for reply
- * altosui: Remove debug printf from AltosRomconfig
- * altosui: Finish device programming code
- * altos: Place rom config variables in fixed location
- * altosui: make default Manifest look for built-in freetts
- * altosui: Separate out log file choosing dialog to share with CSV
- generator
- * altosui: refactor logfile chooser dialog to share more code
- * altosui: Add ability to create CSV file from telem or eeprom files
- * altosui: disable radio monitoring while using serial line for
- debugging
- * altosui: Delay mapping Flash UI until flashing actually starts
- * altosui: fetch existing romconfig for flashing
- * altosui: always display romconfig ui while flashing
- * altosui: write USB serial number string while flashing
- * altosui: flush replies from serial link when entering debug mode
- * altos: always rebuild ao_product.c to track git version
- * altos: print GPS state flags in GPS 'g' command
- * altos: mark gps date written only after it gets into eeprom
- * altosui: Move number parsing code to Altos general class
- * altosui: Add AltosGreatCircle constructors
- * altosui: add rssi and distance/dir from pad to CSV files
- * altosui: AltosEepromReader was mis-setting boost tick
- * altosui: Add support for old (version < 3) telemetry files
- * altosui: Serial line is in UTF-8 encoding. Deal with it.
- * altosui: When parsing saved telem files, errors shouldn't abort file
- * altosui: Remove debug printf from AltosState.java
- * altosui: command line args are converted to csv format
- * altos: prepare for sdcc 2.9.1
-
- [ Bdale Garbee ]
- * add a dummy install target
- * lose the prebuild hook for now while I'm fumbling
- * add install target for libaltos
- * add an install target for altosui
-
- [ Keith Packard ]
- * altosui: add elevation and range information
-
- [ Bdale Garbee ]
- * fix up the wrapper's path to the jar file
- * update Debian standards version
- * fix permissions on installed jar file, switch from ao-view to
- altosui in
- * install altosui man page
- * fix man page delivery path
- * Revert "lose the prebuild hook for now while I'm fumbling"
-
- -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
-
-altos (0.6+303+gb6da90b) unstable; urgency=low
-
- * add freetts as a build dep
- * move to science menu
- * working on java packaging details
-
- -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
-
-altos (0.6+292+g8fc261c) unstable; urgency=low
-
- * see if my new freetts package works
-
- -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
-
-altos (0.6+290+g7877496) unstable; urgency=low
-
- [ Keith Packard ]
- * altosui: check for closed serial device before reading
- * altosui: Remove unnecessary freetts .jar files
- * altosui: Close serial, join reader thread, free altos_file
- * altosui: remove debug printf
- * libaltos: build with java src encoding UTF8
- * altosui: construct Darwin application directory
- * Add Mac OS X packaging bits
- * altosui: Switch eeprom extension back to .eeprom
- * Moved Mac OS packaging to altosui dir
- * altosui: remove option to install to alternate volume
- * Make altosui test script executable
-
- -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
-
-altos (0.6+277+gd184819) unstable; urgency=low
-
- [ Bdale Garbee ]
- * fix text since TM only has one led to blink
- * add swig as a build dep
- * add a jdk to the build deps
-
- [ Keith Packard ]
- * When the EP0 IN buffer is full, don't panic, just skip sending
- another
- * Add libaltos which talks to USB connected altos devices
- * Switch AltosUI to libaltos for device access
- * Present list of altos devices in nice format
- * Re-enable freetts
- * Re-enable Linux support for altosui.
- * Darwin doesn't have strndup.
- * libaltos needs -I. on all systems
- * libaltos: make clean remove all built files
- * libaltos: build fat 10.5-compatible library
- * Add Mac OS X packaging files for altosui
- * Add application icons for Mac OS X
- * Clean up altosui build a bit
- * Remove directories as .class file dependencies; it makes them get
- rebuilt all the time
- * Java clean ups -- use varargs where possible, remove
- AltosSerialReader
- * Java voice reporting cleanups.
- * Force java source encoding to UTF-8
- * Make ao_log_data re-entrant as it is used for both sensor and GPS
- logs
- * altosui: Catch errors opening USB devices. Limit list to relevant
- devices
- * Make voice and channel menus work.
- * Add voice test command for help in adjusting volume.
- * Remove debug printf
- * altosui: Add eeprom data capture function. No UI yet.
- * altosui: Add progress bar for eeprom downloading status
- * altosui: Fix Save flight data monitor layout, add cancel
- * altosui: Replace device dialog. Center eeprom monitor.
- * altosui: report rocket ground bearing at landing only if known
- * Reset GPS ready status when GPS comes unlocked on the pad
-
- -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
-
-altos (0.6+236+gcd8aa79) unstable; urgency=low
-
- [ Keith Packard ]
- * Telemetry code was mis-computing RSSI
- * Switch DBG pins to GPIO when using any debug commands. Reboot to
- restore.
-
- [ Bdale Garbee ]
- * significant documentation update
- * add build dep for sndfile
- * reflect documentation file name change
- * update to latest Debian standards version
-
- -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
-
-altos (0.6+224+g4766b13) unstable; urgency=low
-
- [ Bdale Garbee ]
- * documentation updates from Bob
-
- [ Mike Beattie ]
- * Extension to KML output format, and minor bug fix
-
- [ Keith Packard ]
- * ao-view: disable radio telemetry monitoring during channel change
- * Add special code for USB panic's.
- * ao-postflight: was walking off state.data array
- * Abort any in-progress radio operation when changing radio channel
-
- -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
-
-altos (0.6+214+g16c4cae) unstable; urgency=low
-
- [ Bdale Garbee ]
- * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
- * merge a derivative of Bob Finch's mere mortals guide as getting started
- * merge the altusmetrum-themes package
-
- [ Keith Packard ]
- * Fix telemetrum.inf, tested by Adrian and Keithp
- * Finish basic flight monitoring UI with voice using FreeTTS
-
- -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
-
-altos (0.6+204+g6bd8513) unstable; urgency=low
-
- * lose the quotes since they apparently aren't necessary
-
- -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
-
-altos (0.6+202+gae6854d) unstable; urgency=low
-
- * update desktop file for conformance with current standards
-
- -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
-
-altos (0.6+200+g68eaaa6) unstable; urgency=low
-
- * add initial package build scripts for Arch Linux from Bob Finch
- * add desktop file provided by Bob Finch
-
- -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
-
-altos (0.6+195+gcde60f1) unstable; urgency=low
-
- * Revert "Merge remote branch 'remotes/origin/fix-reset'"
-
- -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
-
-altos (0.6+193+g314d27a) unstable; urgency=low
-
- [ Keith Packard ]
- * Don't change dbg clock while changing reset_n. Use 20ms everywhere
-
- -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
-
-altos (0.6+190+g8b6767e) unstable; urgency=low
-
- [ Keith Packard ]
- * Fix all stdio reading functions to be __critical
- * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
-
- -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
-
-altos (0.6+187+g8702f49) unstable; urgency=low
-
- [ Bdale Garbee ]
- * more text created during SFO->DEN flight
- * initial attempt at a telemetrum turn on script .. needs work
-
- [ Keith Packard ]
- * Revert "Add optional 's' command to packet slave to enable/disable
- slave mode"
- * Disable interrupts while reading from stdin
-
- -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
-
-altos (0.6+180+g99094f0) unstable; urgency=low
-
- [ Keith Packard ]
- * Increase reset switch time to 100ms
- * Add optional 's' command to packet slave to enable/disable slave
- mode
- * More ALtosUI changes
- * Autodetect flite voice registration function
-
- [ Bdale Garbee ]
- * capture work done on SFO->DEN flight
- * add some RF usage information from an email reply sent today, and
- re-indent
-
- -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
-
-altos (0.6+171+g9394393) unstable; urgency=low
-
- [ Bdale Garbee ]
- * wrong Yaesu model
-
- [ Keith Packard ]
- * Only have the slave return a packet if it received one.
-
- -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
-
-altos (0.6+168+gc0ee1ae) unstable; urgency=low
-
- [ Bdale Garbee ]
- * INSTALL file changed by auto tools
-
- [ Keith Packard ]
- * libflite may forget to reference libasound
-
- -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
-
-altos (0.6+164+g5c3b6e2) unstable; urgency=low
-
- [ Keith Packard ]
- * Start adding java-based UI
- * Add telemetry data parsing code
- * Add Windows install .inf file
- * Fix windows install file
- * Add telem parsing code
- * Steal C code from ao-view
- * Display table of flight info. gps is not working yet though
- * Fix up table formatting
- * Fix status update
- * Fix state updates
- * Clean up GPS data formatting
- * Report current gps nsat, not last locked nsat
- * Remove GPS data missing from skytraq. Save max height/accel/speed
- * Remove unused cell renderer class
- * Make .jar file
- * Use RXTX for serial comm. Add logdir preference saving
- * Make ao_radio_idle keep trying to get the radio to idle.
- * Don't abort the radio when enabling telemetry monitoring
- * Clean up some altosui comments
- * Switch TeleMetrum from v0.2 to v1.0
- * Add Linux device discovery
- * Interrupt running replay thread when starting another replay
- * serial port read function cannot be interrupted. poll every 1 second
- * TD reports "not-connected" when GPS has 0 sats
- * Tasks may move in task structure as a result of ao_exit
- * Enable telemetry monitoring
- * Use 16-bit flite voice (which appears to have changed symbols
- recently)
- * When changing RESET line, delay 20ms
-
- [ Bdale Garbee ]
- * choose a better set of docbook xsl files
-
- -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
-
-altos (0.6+131+g6629ec5) unstable; urgency=low
-
- * lose the url entirely for now
-
- -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
-
-altos (0.6+129+g934434f) unstable; urgency=low
-
- * fix typo in url
-
- -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
-
-altos (0.6+127+g05ad583) unstable; urgency=low
-
- * need another build dep
-
- -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
-
-altos (0.6+125+g8f1d47e) unstable; urgency=low
-
- * make lintian happy
- * tweak copyright assertion
- * crudely incorporate "day in the life" info from web page
- * rewrite urls in docbook format
-
- -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
-
-altos (0.6+119+g00f49c8) unstable; urgency=low
-
- [ Bdale Garbee ]
- * update changelogs for Debian build
- * move gbp.conf into debian/
- * initial harness for documentation
- * fix typo
-
- [ Keith Packard ]
- * Round radio calibration value instead of truncating
- * Document the ao-dumplog '--remote' flag for radio-link downloads
-
- -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
-
-altos (0.6+108+g6e61170) unstable; urgency=low
-
- [ Keith Packard ]
- * Need to duplicate new altitude conversion code in aoview.
-
- -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
-
-altos (0.6+106+ga1478f6) unstable; urgency=low
-
- [ Keith Packard ]
- * Add ao_radio_xmit to help test boards without flashing them.
- * Allow product names to have suffixes (like board revisions)
- * Fix and document the ao-rawload --run flag
- * Add LED test
- * Leave .ihx files in the build directory too - easier to debug that way
- * Eliminate deadlock when writing config from radio link
- * Fix up LED colors for each product.
- * Add .gitignore for ao-bringup
-
- [ Bdale Garbee ]
- * create a turn on script for lighting up TeleDongle v0.2 boards
-
- -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
-
-altos (0.6+95+g2f45953) unstable; urgency=low
-
- * update changelogs for Debian build
- * conditionalize use of git on executability of /usr/bin/git binary
-
- -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
-
-altos (0.6+88+gdeccc10) unstable; urgency=low
-
- * add gawk as a build dependency since strtonum is a gawk extension
-
- -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
-
-altos (0.6+86+g2491282) unstable; urgency=low
-
- [ Keith Packard ]
- * Disable monitor mode before attempting radio test.
- * Ensure that ao_alarm waits at least the specified time
- * Remove dbg driver code from telemetrum/teledongle
- * Add AT45DBxx1D driver
- * Remove green LED and temp sensor from v0.2 code
- * Add at45db161d.h header file for new flash part.
- * Add 'f' command to display flash status register contents
- * Dump more flash parameters for the flash_status command
- * Dump config block from read/write config and flash_status commands
- * Don't set ao_flash_setup_done until we're actually done.
- * Remove flash debugging printfs
- * Add simple gps dump command 'g'
- * Force idle mode by shorting the SPI clock to ground at boot time.
- * Switch to using internal cc1111 temperature sensor
- * Missing ao_mutex_put in gps_dump
- * Compute daytime using GPS as time base
- * Pull in a bit more data for filtering the start of the boost
- * Log GPS data on pad after boost detect.
- * Change barometer conversion code to shrink conversion table
- * Change altos build process to support per-product compile-time
- changes
- * Update .gitignore files
- * Quiet make output.
- * Add back stack size checking to altos linking phase
- * Must install .map files for ao-load to work
-
- -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
-
-altos (0.6+60+g10d1bbc) unstable; urgency=low
-
- [ Keith Packard ]
- * Use ao_radio_get/ao_radio_put in packet code.
-
- -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
-
-altos (0.6+58+gbbb152c) unstable; urgency=low
-
- [ Keith Packard ]
- * Re-order config values. Change frequency to cal
- * Allow radio calibration to be set from ao-load
- * Add --cal to man page
-
- -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
-
-altos (0.6+53+gcd49847) unstable; urgency=low
-
- [ Keith Packard ]
- * Remove send_serial and serial_baud commands.
- * Make ao_cmd_decimal produce both 32 and 16 bit values.
- * Add radio calibration configuration.
-
- -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
-
-altos (0.6+49+g9a1d7dd) unstable; urgency=low
-
- [ Keith Packard ]
- * Change default callsign to "N0CALL"
-
- -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
-
-altos (0.6+47+g4053309) unstable; urgency=low
-
- * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
- * change home URL in control file to be the AltOS page
-
- -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
-
-altos (0.6+43+gd6ba07e) unstable; urgency=low
-
- [ Keith Packard ]
- * Decode HDOP data from skytraq GPS
- * Document ao-postflight --gps and --kml options.
- * Make ao-postflight create filenames using input filenames.
- * Make TD print 0000-00-00 for invalid dates.
- * Fix --plot arg handling. Add -all option.
- * Convert telemetry file GPS satellite information in cc_log_read
- * Don't crash if --plot isn't passed on ao-postflight command line
- * ao-postflight: compute barometric alt for each GPS position
- * ao-postflight: don't try to use missing gps sat data
- * Automatically extract flight number for eeprom and telem filenames.
-
- -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
-
-altos (0.6+32+g87e6f3e) unstable; urgency=low
-
- [ Bdale Garbee ]
- * fix typo in comment
-
- [ Keith Packard ]
- * Reduce igniter firing time from 500ms to 50ms.
- * Add GPS date/time output to ao-postflight.
- * Eliminate SiRF state values from ao-view.
-
- -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
-
-altos (0.6+27+gb0d7e3f) unstable; urgency=low
-
- [ Keith Packard ]
- * Add two-point accelerometer calibration.
- * Remove "l" command as ao-dumplong no longer uses it
- * Remove "d" command
- * Remove "f" command
- * Reformat ADC values to show all 16 bits
- * ao_flight_test was using accel value for pressure too
- * Pass accel calibration over telemetry stream. Telemetry data format
- change.
- * Add ability to dump eeprom data over radio link.
- * In packet master, move USB flush from packet thread to echo thread
- * In USB pollchar, wait for packet before re-checking USB out len
- * Explicitly use USB I/O routines in packet code
- * Flush pending input when switching to remote packet mode
- * Stop recording in ao-dumplog after receiving an invalid block
- * Move ao_match_word from ao_ignite.c to ao_cmd.c
- * Add Watchdog Timer Control register definitions
- * Add reboot command.
- * Return radio to telemetry settings when packet system closed.
- * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
- * Loosen tolerances for main->landed transition
- * Provide a dummy 'uninstall' target in the src directory.
- * Share telemetry parsing code in cc library.
- * Enable telemetry receive in ao_view
- * Switch order of serial/flight in ao-postflight summary
- * Add flight number to telemetry stream.
- * Add date to GPS data, captured from GPRMC packet.
- * Stop using SiRF state info.
-
- -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
-
-altos (0.6) unstable; urgency=low
-
- [ Keith Packard ]
- * Add support for the SkyTraq GPS unit
- * Build two versions of TM, one for SiRF, one for SkyTraq
- * Save some DSEG space by marking cmd functions __reentrant
- * Add ao_wake_task and ao_exit
- * Add keyhole-markup generation for ao-postflight.
- * Initial packet bits. Just testing transmission
- * Add radio carrier command
- * Wait for TX to finish sending data
- * Add ao_alarm
- * Remove reason from ao_dma_abort
- * Switch packet code from timer thread to ao_alarm
- * Use ao_radio_done to wait for TX to completely finish with packet
- * Send SYN packet to set sequence numbers
- * Add RFIM register
- * Do more flushing in packet test code
- * Use ao_alarm for ao_delay so it can be easily interrupted
- * Poke master to speed up packet rate when things are busy
- * No need to wakeup &ao_tick_count now
- * Enable packet-based communcation to command processor
- * Add more docs to the README file
- * Disable interrupts while removing tasks from task list
- * Add ao_usb_pollchar to ao.h
-
- -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
-
-altos (0.5+90+g127c312) unstable; urgency=low
-
- * de-version the libreadline-dev build dependency
-
- -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
-
-altos (0.5+86+g2de548f) unstable; urgency=low
-
- * automate push of updated and tagged master branch during
- debian/rules prebuild
- * flush repetitive junk out of debian/changelog, and update the
- prebuild target
- * add support for tagging git repository on each Debian package build
-
- -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
-
-altos (0.5+77+gc57bd7f) unstable; urgency=low
-
- * build for Debian from git
-
- -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600
-