altos/telelco-v3: Create initial flash loader setup

Copied from easymega-v3 with USB pull-up moved to PA9. Note this
assumes the proto boards will have a resistor fitted there, which is
not in the artwork.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/src/telelco-v3.0/flash-loader/Makefile b/src/telelco-v3.0/flash-loader/Makefile
new file mode 100644 (file)
index 0000000..e441b0a
--- /dev/null
+++ b/src/telelco-v3.0/flash-loader/Makefile
@@ -0,0 +1,8 @@
+#
+# AltOS flash loader build
+#
+#
+
+TOPDIR=../..
+HARDWARE=easymega-v3.0
+include $(TOPDIR)/stm32f1/Makefile-flash.defs

diff --git a/src/telelco-v3.0/flash-loader/ao_pins.h b/src/telelco-v3.0/flash-loader/ao_pins.h
new file mode 100644 (file)
index 0000000..0b97d21
--- /dev/null
+++ b/src/telelco-v3.0/flash-loader/ao_pins.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright © 2018 Bdale Garbee <bdale@gag.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+/* 16MHz crystal */
+
+#define AO_HSE         1
+#define AO_HSE_BYPASS  0
+
+#define AO_SYSCLK      72000000
+#define AO_HCLK                72000000
+#define AO_APB1CLK     36000000
+#define AO_APB2CLK     72000000
+#define AO_ADCCLK      12000000
+
+/* PLLMUL is 9, PLLXTPRE (pre divider) is 2, so the
+ * overall PLLCLK is 16 * 9/2 = 72MHz (used as SYSCLK)
+ *
+ * HCLK is SYSCLK / 1 (HPRE_DIV) = 72MHz (72MHz max)
+ * USB is PLLCLK / 1.5 (USBPRE)= 48MHz (must be 48MHz)
+ * APB2 is HCLK / 1 (PPRE2_DIV) = 72MHz (72MHz max)
+ * APB1 is HCLK / 2 (PPRE1_DIV) = 36MHz (36MHz max)
+ * ADC is APB2 / 6 (ADCPRE) = 12MHz (14MHz max)
+ */
+
+#define AO_RCC_CFGR_USBPRE     STM_RCC_CFGR_USBPRE_1_5
+#define AO_RCC_CFGR_PLLMUL     STM_RCC_CFGR_PLLMUL_9
+#define AO_RCC_CFGR_PLLXTPRE   STM_RCC_CFGR_PLLXTPRE_2
+#define AO_RCC_CFGR_PPRE2_DIV  STM_RCC_CFGR_PPRE2_DIV_1
+#define AO_RCC_CFGR_PPRE1_DIV  STM_RCC_CFGR_PPRE1_DIV_2
+#define AO_RCC_CFGR_HPRE_DIV   STM_RCC_CFGR_HPRE_DIV_1
+#define AO_RCC_CFGR_ADCPRE     STM_RCC_CFGR_ADCPRE_6
+
+#include <ao_flash_stm_pins.h>
+
+/* Companion port cs_companion0 PC10 */
+
+#define AO_BOOT_PIN            1
+#define AO_BOOT_APPLICATION_GPIO       stm_gpioc
+#define AO_BOOT_APPLICATION_PIN                10
+#define AO_BOOT_APPLICATION_VALUE      1
+#define AO_BOOT_APPLICATION_MODE       AO_EXTI_MODE_PULL_UP
+
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT     (&stm_gpioa)
+#define AO_USB_PULLUP_PIN      9
+
+#endif /* _AO_PINS_H_ */