1 altos (0.9.6.0+32+gfc7e46b) unstable; urgency=low
4 * altos: Lost change that reported flight 0 when log memory was full
5 * altosui: Ancient log files used 'apogee' for 'coast' state
6 * altosui: Add 'On-board Data Logging' indicator to pad tab
7 * altosui: remove debug printf in pad pane
8 * altosui: Disable 'max flight log' config when there are stored flights
9 * altos: Merge common config code in ao_config.c
10 * Bump version to 0.9.7
11 * altos/altosui: Add ability to disable telemetry/rdf completely
12 * altosui: Clean up command line processing. Add --graph
13 * altos-fat/windows: Check and install Java 1.6 as needed
14 * altosui/windows: Fix a bunch of windows compiler warnings.
15 * altosui: Attempt to make both 32- and 64-bit windows DLLs
16 * doc: Add note about telemetry disable mode to 1.0 release notes
17 * doc: Add Installation Recommendations chapter
18 * altosui: Add a few simple unit conversions
19 * altosui: Capture date/time/serial/flight in AltosFlightStats
20 * altosui: Add date/time/serial/flight to flight stats tab
21 * altosui: Show filename in AltosGraph window
22 * altosui: Add --summary option to dump flight stats to stdout
23 * altosui: Make monitor-idle display correct 'On-board data logging' status
24 * altosui: Can't configure flight log max on TeleMini
25 * altosui: fix 'magic' string to signal end of config data
26 * altosui: Only 'show' config dialog once
27 * altosui: Reset all config data on 'reset' command
28 * altosui: Update mac os X library
29 * libaltos: fix Mac OS X function signatures
30 * altosui: add tool-tips to the button box.
33 * turn off auto-tagging during Debian build
35 -- Bdale Garbee <bdale@gag.com> Tue, 23 Aug 2011 20:10:38 -0600
37 altos (0.9.6.0) unstable; urgency=low
40 * altos: Correct flight log max on Tm to 5k
41 * altosui: Change button to 'Configure Altimeter'
42 * altos: Remove pad_orientation functions from non-accel devices
43 * altos: Add ability to set arbitrary radio frequency
44 * altosui: Add dialogs to configure 'common' frequencies
45 * altosui: Convert from channels to frequencies
46 * Set version to 0.9.5.0
47 * altosui: altimeter is not spelled altimter
48 * altosui: Pull out BlueTooth support
49 * altos: minor type in comment about accel correction
50 * altosui: Must set radio calibration before radio setting
51 * altosui: A few misc cleanups.
52 * altosui: Have single radio_to_frequency function
53 * altosui: Save frequency after setting it in AltosFlightUI
54 * altosui: Show AltosFrequency in scan results
55 * altosui: Remove debugging printfs from AltosSerial
56 * altosui: Flush radio setting to serial device
57 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
58 * altosui: Reading serial from swing thread only bad if remote
59 * altosui: Make set of telemetries to use while scanning configurable
60 * altosui: Add close button to 'fire' dialog
61 * altos: Switch telemini from v0.1 to v1.0
62 * altosui: Don't export product defs from libaltos
63 * altosui: Ensure serial code tracks reply nesting correctly
64 * altosui: Ship TeleMini v1.0 firmware with fat blobs
65 * Altosui: Add flight statistics tab to graph window
66 * altosui: Add a 'Graph Flight' button to the 'landed' tab
67 * altosui: Prune telemetry file graphs to just the flight
68 * altosui: Plot reasonable data from Tm files
69 * altosui: Move launch-sites.txt file to altusmetrum.org
70 * Bump version to 0.9.6.0
71 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
72 * doc: Document Ignite Mode and Pad Orientation configuration options
73 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
74 * doc: Add telemetry docs to debian/linux/mac/windows packages
75 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
76 * doc: Add 1.0 release notes.
77 * altos: Pull igniter pins low as soon as possible at boot time
78 * altos: Apply igniter boot pulse-width reduction to telemini
79 * altos: remove monitor disable stubs from altimeter code
80 * ao-tools: ao-list was crashing with more than 3 devices connected
81 * libaltos: Mis-allocated device list in libaltos
82 * altos: shrink text space from ao_config.c
83 * altos: re-write a bit of GPS parsing code to reduce size
84 * altos/altosui: Report log format in the version command
85 * altos: Don't try to use non-basestations for remote eeprom download
86 * altos: Add SPI-based companion board support
87 * altos: Put SPI in slower mode when talking to companion board
88 * altos: Make sure companion task exits cleanly when done
89 * altos: add the 'L' command to show the status of a linked companion board
90 * altos: Check for companion init packet validity was busted
91 * altosui: Add companion support to the flight UI and CSV conversion
92 * altos: Send SPI message at flight state changes
93 * altos: Send serial/flight to companion board
94 * altos: wait 10s for companion to boot
95 * altosui: Clean up eeprom parsing a bit
96 * altosui: Add support for TeleScience eeprom download
97 * altosui: Devices with log-format can also delete flights
98 * altosui: Eliminate inter-chunk flush_input calls
99 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
100 * altos: Correct AO_CONFIG_MINOR from 6 to 7
101 * altos: Reset radio channel to zero when using radio setting
102 * altos: use raw height while waiting for landing
103 * altosui: don't set channel when using radio setting
104 * altosui: Respect storage limits in flight log max config
106 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
108 altos (0.9.4.5) unstable; urgency=low
111 * altosui: Mark empty eeprom records 'invalid', don't generate exception
112 * altosui: Always read whole eeprom block, even at end of flight
113 * altosui: Display eeprom parsing errors to user
114 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
117 * src/ao_cmd: Shave off bytes from doc strings
120 * altos: Oops. Lost a couple of commands when merging the doc patch
121 * altosui: Missed jcommon.jar in the Mac OS install image
122 * Bump published version number to 0.9.1
123 * aoview: remove -s option.
126 * ao_intflash: Use internal flash for storage
129 * altos: Make serial, usb, beeper and accelerometer optional components
130 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
131 * altos/test: Add baro-only flight test program
132 * altos: Start with packet slave running. Turn off in pad mode.
133 * altos: Add TeleMini v1.0
136 * ao_intflash: Avoid overwriting code
139 * altos: Switch LED usage for TeleMini around
140 * altos: Switch pins around for TeleMini
141 * bringup: Add script for telemini
142 * ao-load: Make usb descriptor rewriting optional
143 * altos: oops -- altitude reporting wasn't pausing between signals
144 * altos: Internal flash ops block when running from flash
147 * ignore new flight test file
150 * altos: Add tiny logging for TeleMini/TeleNano
151 * altos: Add kalman filters for baro-only boards
152 * altos: Tiny logging fixes. Scan at start, stop when land or full.
153 * altos: Add TeleNano support
156 * fix up script to work and have reasonable texts
159 * altos: Fix mini/nano default log size to available flash space
160 * altos/test: Add scripts to run lots of flights through the code
161 * altos: Write height values to log for nano/mini
162 * altos: Baro-only boards must not detect launch on accel or speed data
163 * altosui: Add software version to Configure AltosUI dialog
164 * altos: Don't init packet slave on TD. Make slave start optional
165 * altos: Configure packet size from send/recv parameters.
166 * altos: Make telemetry interval more consistent
167 * altos: Split out tiny telemetry from full telemetry
168 * altos: Split telenano main from telemini
169 * altos: The kalman code requires a constant sample rate
170 * altos: New telemetry report format (version 4). Supports tiny telemetry.
171 * altos: Add .sdcdbrc file for teledongle
172 * altos: Add nickle kalman implementation.
173 * altos: Switch telemetrum over to kalman filter
174 * altos: Compute a 'trust' value for the barometer
175 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
176 * altos: Clean up some debug stuff in ao_flight.c
177 * altos: Add ao_flight_debug code
178 * altos: Missing parens and some bad arithmetic in the kalman code
179 * altos: Fix up flight code testing
180 * altos: Restore sensible kalman values
181 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
182 * altos: Exit flight test at landing. Allow description in test flight list
183 * Add ao_kalman.h to .gitignore
184 * Add description to test flights
185 * altosui: Add support for telemetry version 4
186 * altosui: Add telemetry format menu and preferences
187 * altosui: Remove a bunch of debug printfs from the eeprom manager code
188 * altosui: Add support for downloading TeleMini/TeleNano flight logs
189 * altosui: Remove extra AltosEepromBlock layer
190 * altosui: swing hide/show methods are deprecated
191 * altosui: Allow TM config connection to be canceled.
192 * altos: Variable log rate in full logging code too
193 * altos: full logging must flush pending data before checking state
194 * altosui: Off-by-one error in telemetry format configuration UI
195 * altosui: Allow radio channel to be configured over the radio link
196 * altosui: Tell serial device which frame to use for timeout dialogs
197 * altosui: Handle serial calls from swing thread
198 * altos: Split up flight code into separate flight/sample/kalman bits
199 * altos: Create custom nano flight code
200 * altosui: Clean up packet link connecting dialog
201 * altosui: Make flight log downloading handle 'Connecting...' dialog
202 * altosui: Make deployment testing handle Connecting... dialog
203 * altosui: Display exception messages from swing thread
204 * altosui: Don't display 0000-00-00 for missing flight log dates
205 * altos: ao_sample_preflight was exiting preflight mode immediately
206 * altos: Run RDF beacon after apogee instead of waiting for landing
207 * altos: Enable logging during nano flights
208 * altosui: Parse and export Max flight log value
209 * altosui: Only plot acceleration when present in data file
210 * altos: Reflect ao_flight split in ao_flight_test dependencies
211 * altos: Baro useful ceiling is MSL, not AGL
212 * altos: Make ao_flight_test show true height but report saturated height
213 * altos: Add initial TeleBT code
214 * altos: Add P2SEL_*_MASK defines to cc1111.h
215 * altos: expose set of available stdio values
216 * altos: Provide for a pre-filter on commands
217 * altos: Allow any stdio to be used with packet forwarding
218 * altos: Remove serial monitor command
219 * altos: Make ao_serial_drain public
220 * altos: Clean up usage of serial port for stdio
221 * altos: Clean up serial initialization
222 * altos: Make cmd echo per-connection instead of global
223 * altos: Clean up BT serial communcations
224 * altosui: Add missing AltosTelemetryMap.java file
225 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
226 * altosui: Add TeleBT USB device support
227 * altosui: Add low-level Bluetooth APIs
228 * altos/altosui: Log averaged baro sensor data in Tm/Tn
229 * altosui: oops - lost state changes when downloading eeprom data.
230 * altos: Write a few pre-launch samples for Tm/Tn devices
231 * altosui: Add primitive bluetooth device manager UI.
232 * altosui: Create abstract AltosDevice class
233 * altosui: Make AltosBTDevice implement AltosDevice interface
234 * altosui: Make bluetooth dialog modal
235 * altosui: Use persistent list of bluetooth devices for device dialogs
236 * altos: Add delays to bt startup sequence
237 * altosui: Wait two seconds after bluetooth connect XXX
238 * altos: Solidify BT connections
239 * altos: Simplify BT communications
240 * altos: Remove bt debug command
241 * altos: remove BT logging code
242 * altosui: Eliminate ao_cmd_filter hook
243 * altosui: Make flight data download work through TeleBT
244 * altos: add telebt-v0.0 Makefile
245 * altosui: Separate out flash debug code to separate thread
246 * altosui: Fix TeleBT name in flight monitor title
247 * altosui: Display reader name (usually the device) when an I/O error occurs
248 * altosui: Move AltosIgniteUI device open out of Swing thread
249 * altosui: Fix BT manage dialog so that the device lists resize
250 * altos: Add preliminary telebt v0.1 defines
253 * first cut at a telebt turn on script
256 * altos: Add telebt-v0.1 to Makefile
257 * altos: Use USART configuration 1 with flow control for TBT
258 * altos: Fix BT link status pin for real TBT hardware
259 * altos: pull TBT v0.1 ser_reset line low
260 * altos: Add beeper to TBT v0.1
261 * altos: Debugging TBT issues -- check pin configuration after boot
262 * altos: Initialize beeper for telebt
263 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
264 * altos: clear CPU port 1 interrupt flag when handled
265 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
266 * Switch version to 0.9.4
267 * altosui: Handle old TeleDongle receiving kalman telemetry packets
268 * altos: Rename telemetry to telemetry_orig
269 * altos: Add arbitrary telemetry packet monitoring
270 * altos: Add checksum to TELEM output lines
271 * altos: Start adding new telemetry frame definitions
272 * altos: ao_radio_recv needs byte count *including* rssi and status
273 * altosui: Support raw telemetry from TeleDongle
274 * doc: Add telemetry format description
275 * doc: Complete initial telemetry description
276 * doc: Fix a few minor telemetry doc mistakes
277 * Version strings must be < 8 bytes long
278 * altos: teledongle does not need ao_packet_slave.c
279 * altos: Shrink const space in ao_config
280 * altos: Add sat info to GPS report command
281 * altos: Shrink help text
282 * altos: Add split telemetry code
283 * altos: Complete new telemetry switchover
284 * altosui: Parse remaining standard telemetry packets
285 * doc: Chang Config and Location packets
286 * altos: Adapt to changes in telemetry Configuration packet
287 * doc: Add section about TeleDongle USB line format
288 * altosui: Elide nul bytes at end of telemetry string values
289 * altosui: Elide missing values from graphs
290 * altosui: Add main/drogue voltages to default graph
291 * altosui: Remove debug printf.
292 * altosui: Compress telemetry records marked with the same time
293 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
294 * altos: Shrink ao_config_callsign_set
295 * altos: Shrink ao_add_task by rolling up a memset loop
296 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
297 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
298 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
299 * altos: Switch ao_report.c __xdata to __pdata
300 * altos: Switch ao_rssi.c __xdata to __pdata
301 * altos: Switch ao_sample.c __xdata to __pdata
302 * altos: Switch ao_serial.c __xdata to __pdata
303 * altos: Switch ao_stdio.c __data to __pdata
304 * altos: Switch ao_telemetry.c __xdata to __pdata
305 * altos: Switch ao_usb.c __xdata to __pdata
306 * altos: Switch const for __code in struct ao_cmds
307 * altos: switch ao_cmd __xdata to __pdata
308 * altos: Switch ao_config.c __xdata to __pdata
309 * altos: Switch ao_dbg.c __xdata to __pdata
310 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
311 * altos: Switch flash drivers __xdata to __pdata
312 * altos: Switch Tm and Tn to common telemetry code
313 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
314 * altos: Ensure low-rate telem packets interleave with sensor telem packets
315 * altos: product defines are always in ao_product.h
316 * altosui: Build device constants into .java code
317 * altosui: Don't show missing igniter and gps values
318 * altos: new versions of sdcc require __ prefixes for custom keywords
319 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
320 * altosui: Start adding support for scanning radio for available devices
321 * altosui: Pop up monitor window from scan dialog
322 * altosui: Remove debugging printf from AltosLog
323 * altosui: Configuration telemetry record includes flight number
324 * altosui: Finish radio scanning UI
325 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
326 * altosui: Initialize channel and telemetry before use in ScanUI
327 * altosui: Set 'seen' bits in legacy telemetry packet reader
328 * altosui: Add map preloading GUI
329 * altosui: Try to avoid resize weirdness with map preloading
330 * altosui: Flush telemetry lines before starting to watch for scan results
331 * altosui: Display full map preload area in view.
332 * altosui: Remove a bunch of sitemap debugging printfs
335 * altosui: Make sure degree and minute values are visible (map preload)
338 * Set version to 0.9.4.4
339 * altos, altosui: Add igniter mode (dual, apogee, main)
340 * altosui: Download list of site locations for map preloading
341 * altosui: Add launch-sites.txt
342 * altosui: Add a bunch more site locations
343 * altosui: Mark preload site location with red circles (like launch)
344 * Fix NCR Pawnee location
345 * Add HARA Bragg Farms site
346 * altosui: Change continutity colors to yellow/magenta
347 * altos: Add ability to read new TELEM files to ao_flight_test
348 * altos: Average height values for landing detection
349 * altos: Reduce height averaging filter time constant
350 * altos: Require sequencing through 'main' state before landing
351 * altosui: Standard text field in flight UI needs more width (now 20)
352 * altosui: Parse accel cal from 'c s' command
353 * altosui: Simple timeouts don't work with query data
354 * altosui: Add idle monitor dialog
355 * altos/altosui: Add pad orientation configure option
358 * update version for a Bdale build for use turning on TeleMini v1.0
359 * simplify version in last changelog entry so git-dch is less confused
360 * update changelogs for Debian build
361 * update changelogs for Debian build
362 * stop doing automatic tag push during builds
363 * build depend on bluetooth dev package
364 * clean up all existing lintian warnings
365 * rewind changelog for re-build of 0.9.4.5
367 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
369 altos (0.9.1) unstable; urgency=low
372 * ao-load: fix usage message to note that '=' is required for options
373 * altos/test: Add dependencies in the Makefile for ao_flight_test
374 * altos/test: auto-configure acceleration parameters from the log file
377 * ao_radio: generalise setup of packet size
378 * src/ao_gps_skytraq: simplify parsing code
379 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
382 * tie bringup scripts to Bdale's bench TeleDongle
384 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
386 altos (0.9) unstable; urgency=low
390 * update changelogs for Debian build
391 * update turnon script to prefer TeleDongle as programmer
394 * altos: Program default flight log max value for new boards
396 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
398 altos (0.8.1+81+g4ae724f) unstable; urgency=low
400 * we need an install target to prevent parent dir make from failing
402 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
404 altos (0.8.1+79+g9a5666f) unstable; urgency=low
407 * doc: Don't delete telemetrum-outline.pdf
408 * doc: Add v0.9 features from altosui to documentation.
411 * add 0.9 revision entry, with caveat about telemetry format change
412 * freshen copyright year
415 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
416 * fat: Add docs to Linux package
417 * doc: Build with 'make all' from top level. Build with 'make fat'
419 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
421 altos (0.8.1+71+gda42f40) unstable; urgency=low
424 * doc: Add telemetrum mounting template in svg and pdf forms
427 * Re-order and re-arrange eeprom download dialog
428 * Convert EepromSelect dialog to use a GridBag
429 * Close serial port if Download/Delete dialog is cancelled.
432 * altosui: Reset eeprom download instance variables before reading
434 * altosui: Make serial debug more complete and accurate
435 * altosui: Use long input flush timeout when remote.
436 * altosui: Remove debug message when eeprom downloads are complete.
437 * altosui: Ensure serial device is closed after eeprom download
439 * altosui: Require 4 sats to light up the 'GPS locked' light.
440 * doc: inkscape tracks the filename inside the document
441 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
442 * altos: Flush log when full
445 * altos: Restructure skytraq NMEA parsing code to save some space
448 * altos: average 512 accel/baro samples at startup instead of 1000
451 * altos: Added check for an accel value above 1.5g
452 * altos: Added check for out of bounds accel
455 * altos: Add DATA_TO_XDATA to linux test harness
456 * altosui: Remove spurious colons from eeprom selection headers
459 * Rework invalid accel cal detection code
462 * altos: Auto-calibrate linux-based flight testing code
463 * altos: Ensure flight code gets first crack at new ADC data
464 * altos: Sample the accelerometer reference voltage on v1.1 boards
465 * altos: Optimize fetching of ADC data in flight code
466 * altos: Use 5V reference data to correct accelerometer measurements.
467 * doc: Remove mention of ao_wake_task
470 * update documentation to reflect reality that modifying a board for
471 separate pyro battery is not trivial
473 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
475 altos (0.8.1+42+g646e192) unstable; urgency=low
478 * altosui: Show dialog after successful delete or when no flights
479 * altosui: Ensure serial line is flushed after disabling remote link
480 * altosui: Add preference for serial debugging.
482 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
484 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
487 * altos: Add configuration parameter for maximum flight log size
488 * altos: support storage of multiple flights.
489 * altos: Speed up at45 and 25lc erase speeds
490 * altos: white space fix
491 * altos: report flight log offsets in hex block numbers instead of
493 * altos: ensure erase mark is written when erasing flights
496 * altos: Optimize Morse code generation
499 * altos: Check requested log max size against available space
500 * altos: Check for full log and complain
501 * altosui: Add configuration of flight log size
504 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
505 * altos: Remove redundant initialization of ao_interval variables
508 * altosui: Split eeprom download code apart
509 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
511 * altosui: Add support for parsing list of flights from the 'l'
513 * altosui: Add eeprom 'manage' ui to download and delete multiple
515 * altos: check for valid flight number in ao_log_delete
517 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
519 altos (0.8.1+18+g408a3e0) unstable; urgency=low
522 * altosui: move maps to subdir, fix E/W mismatch
525 * altos: clean up radio abort paths. Share radio code.
526 * altos: eliminate ao_wake_task
527 * windows: Add compatibility IDs to telemetrum.inf
528 * windows: Update NSIS installer file to use compatibility IDs
529 * altos: Split out SPI driver.
530 * altos: Add telemetrum-v1.1 directory
531 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
532 * altos: Simplify storage API
533 * altos: Require manual flight erasing.
534 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
535 * altos: Rip out 'optimization' in ao_log_scan
536 * altos: Mark end of available flight list with 'done' to make the UI
538 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
540 altos (0.8.1+4+gea95c06) unstable; urgency=low
542 * fix symlink paths in rules file
544 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
546 altos (0.8.1+2+gea7130e) unstable; urgency=low
548 * modify Debian package build to deliver one copy of background.png
551 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
553 altos (0.8.1) unstable; urgency=low
556 * moved doc dir in web content to AltOS tree
557 * fix publish target in doc/Makefile
558 * fix section layering
559 * fix an Altos vs Altus typo in the docs
560 * adding Bdale's release process document to the source tree
563 * windows: Add jfreechart.jar and jcommon.jar to windows install image
564 * Move "Releasing" to top level
565 * Add minimal release testing plan to Releasing
570 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
572 altos (0.8) unstable; urgency=low
575 * altosui: Correct windows hardware IDs for nsis installer file
576 * windows: try harder to get windows install to work
577 * windows: remove some non-existent .inf file section references
578 * windows: more .inf file hacking
579 * windows: Bump .inf file version
582 * declaring 0.8 released
583 * update changelogs for Debian build
584 * update changelogs for Debian build
585 * rewind changelog to recover from stupid build failure
587 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
589 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
592 * altosui: Split out flight monitoring to separate window
593 * altosui: Create buttons for main actions
594 * altosui: Fix channel setting at serial open time
595 * altosui: Fix more calls to AltosPreferences.channel()
596 * altosui: Create abstract interface for flight data display
597 * altosui: Add tab UI with 'pad' mode.
598 * altosui: Add ascent, descent and landed tabs
601 * Updated PKGBUILD-git.altos
604 * altos: Use grey leds when unlit - easier to see
607 * use value_font for values
608 * add --replay command line argument
609 * read preferences for --replay
610 * reduce font size for FlightInfoTable
611 * use grayled.png for off
612 * add compass bearing to voice output
613 * add compass bearing during descent
614 * add site map tab, at least for QRS launches
616 * make infotable scrollable, revert its fontsize to 14
617 * pull up maps for arbitrary locations
618 * better error behaviour if no map
621 * first cut at instructions on how to re-flash TM and TD devices based
623 * fold in content from Keith's email on the re-flashing subject
626 * altosui: Add RF calibration to TeleMetrum config dialog
629 * AltosTelemetryReader: actually open serial port
630 * AltosSiteMap: add targeting circles around landing site
633 * continuing to work on the docs
636 * altosui: Eliminate unncessary import altosui lines
637 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
638 * altosui: Replace flight status table with labels, fix resize.
639 * altosui: With --replay option, exit when replay window is closed
640 * altosui: oops, missed a file in the previous commit
641 * altosui: eliminate menu bar, moving elements to buttons.
642 * altosui: add reboot button to telemetrum configuration UI
645 * add a paragraph about forcing TM back to idle mode if an accel cal
649 * altosui: Add callsign configuration in AltosUI configuration dialog
650 * altosui: Cleanup flight UI layout
651 * altosui: Add igniter status to ascent and descent tabs
654 * altosui: tile site maps
655 * AltosSiteMapTile: autoscale to about 2 nmi per tile
656 * AltosSiteMapTile: adjust centering calculation
657 * AltosSiteMapTile: adjust scale to 1 nmi per tile
660 * altosui: Add igniter ground testing code
661 * altosui: Unify datafile selection to AltosDataChooser
662 * altosui: Clean up global AltosUI configuration settings dialog
663 * doc: Add preliminary altosui documentation
664 * doc: git ignore generated doc files
665 * doc: Document the 'Flash Image' operation.
666 * altosui: Use timeouts to recover from broken packet links.
669 * update turnon scripts to use stashed copies of stable release
673 * altosui: switch channel selector to combo box. Shorten displayed
675 * altosui: When switching log files, don't terminate log thread
676 * altosui: calling thread.interrupt with null thread doesn't work well
677 * altosui: Initialize display thread state in constructor instead of
679 * altosui: Fix channel changing in flight UI to actually work
682 * AltosSiteMap: add autoscroll and grabndrag scroll
683 * AltosSiteMapTile: seperate map and drawing layers
684 * AltosSiteMap: automatic fetching of map data
685 * AltosSiteMapTile: draw boost circle as well as landed
686 * AltosAscent/Descent: tidy up layout
687 * AltosDescent: switch elev from height to range
693 * AltosSiteMap: major refactoring
697 * altosui: change descent tab formatting to four columns
700 * AltosSiteMap: be more polite about preferred size
704 * altosui: Rewrite info table to mix with scroll pane well. Fix
708 * AltosSiteMap: better gps check, lower zoom
711 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
714 * AltosSiteMap: explain tile size better
715 * AltosSiteMap: extend map if rocket goes far away
716 * AltosSiteMap: try to get new tile construction right
717 * AltosSiteMap: thread safe tile addition
718 * AltosSiteMap: refactor tile collection
719 * AltosSiteMap: never accept 0,0 as lat/long
720 * AltosSiteMap: limit nr of tiles to 200x200
723 * altosui: When fixing eeprom gps time information, make GPS data
727 * AltosSiteMap: ensure buffer around active tile
728 * altosui: improve sitemap scrolling behaviour
729 * altosui: keep sitemap more centred on rocket
732 * altos: Add on/off modes to 'C' command
735 * Added PKGBUILDs for deps into contribs
738 * altosui: Close serial port when debug link fails
739 * altos: assume igniter worked.
742 * add a rudimentary --help for command line use
745 * doc: Add internal documentation for AltOS
748 * altosui: don't switch away from user selected tab
749 * altosui: sitemap uses rocket gps if no pad gps
752 * merge Keith's AltosUI documention into "the big book"
753 * lose the placeholder on how GPS works, as it's going to be a
756 * altos: remove unused variable from ao_igniter
757 * altos: Don't abort radio transmissions with ao_radio_abort
758 * altos: Make radio test command careful with the radio mutex.
759 * altosui: Make AltosSerial.flush_input keep reading while non-empty
760 * altosui: New AltosSerial.set_radio function sets channel/call
761 * altosui: Disable radio configation over packet link.
762 * altosui: Let people fire igniters that don't read as 'ready'
763 * altosui: Make sure packet mode is turned off when the connection
767 * docs: Document altosui "Graph Data" button
770 * Move altosui to the top level, placing libaltos inside it.
773 * doc: Document altosui "Site Map" tab
776 * Missing change to top level Makefile to build altosui
779 * fix missing section close in Site Map content
781 * manually fold in documentation work from the master branch
784 * doc: Reformat altos to use sections for each function
785 * doc: Add more authors, fix URL formatting, note that AltosUI
787 * doc: Rename telemetrum-doc as altusmetrum
791 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
793 altos (0.7.1+36+g811ced6) unstable; urgency=low
796 * remove the csv build dep, as that code will be abandoned
799 * altosui: Remove ability to graph data in .csv files
800 * altosui: Separate out jfreechart and jcommon directories
802 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
804 altos (0.7.1+32+g8103432) unstable; urgency=low
806 * add build-dep on libcsv-java
808 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
810 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
813 * make the column headers comma separated, too, so they align with the
817 * altosui: set default .csv file name in file save dialog
818 * altosui: Remember directory containing firmware files
822 * Add JFreeChart to Makefile.am
825 * altosui: Use recorded ground acceleration when reading eeprom files
826 * altosui: Write raw sensor data to .csv files
827 * altosui: Factor some UI elements into separate classes
828 * altosui: remove unused ReplayThread wrapper classes
829 * altosui: Require 4 sats for 'good' GPS data
830 * altosui: Create iterables for log file scanning. Split out display
832 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
834 * altosui: Deal with eeprom dates going backwards across wrap
837 * Hax0r graphing to support telem/eeprom files
840 * altosui: use Altos constants in graphing code
843 * Add callsign/serial/flight to graph title
846 * altosui: Add KML file export.
849 * add build dep on jfreechart lib
851 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
853 altos (0.7.1) unstable; urgency=low
856 * Add firmware and libaltos to 'fat' target at top-level
857 * altosui: Remove some debug printfs.
858 * altosui: libaltos.so is built with libtool -- it's in
860 * Add --with-fat-dir configure option to publish finished stand-alone
862 * altosui: Fix telemetry file reader to handle tick count wrapping
863 * altosui: Remove debug printfs from AltosTelemetryReader
864 * altosui: Fill in time value of last Eeprom record read from file
865 * altosui: Stop parsing eeprom file after hitting 'landed' state
867 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
869 altos (0.7+96+g48f5799) unstable; urgency=low
872 * altosui: conflating USB product and vendor IDs is a bad idea
874 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
876 altos (0.7+94+g1ac3d7e) unstable; urgency=low
878 * initial cut at an altosui man page
880 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
882 altos (0.7+92+g0ea7576) unstable; urgency=low
885 * handle versioning of ihx files (poorly) by just wildcarding the file
889 * altosui: Need to have JVM include path substituted into libaltos
891 * altosui: Store libaltos.so in $(libdir)/altos
892 * altosui: Display error dialog when AltOS JNI library can't be loaded
894 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
896 altos (0.7+86+g6c0ae7e) unstable; urgency=low
899 * altosui: Add explicit requirement to create classes directory
900 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
902 * altosui: hack to make JAVAROOT directory get created before javac
904 * altosui: remove FATJAR from all-local to avoid building fat .jar
908 * add libtool to build deps
911 * altosui: Add windows installer build using 'nsis'
912 * altosui: ignore built files
913 * altosui: oops. renamed the nsis file to altos-windows.nsi
914 * icon: add some icons for application programs
915 * altosui: Add icons to application and Windows menus.
916 * Use autotools for altosui and libaltos
917 * altos: add some SDCDB config files
918 * Ignore libtool files.
919 * Add version numbers to released files. Set version to 0.7.1
920 * Add top-level 'fat' target to aid building distribution files
921 * altosui: Fix windows installer to ship correct files
922 * altosui: Fix up Mac OSX .zip file
923 * altosui: Fix linux fat distribution
924 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
925 * altosui: Remove debugging printf from AltosEepromReader
926 * altosui: Eeprom files contain only one date; save it.
927 * altosui: Add elevation and range data to main display
928 * altosui: When replay thread is interrupted, don't make final report
929 * altosui: Start idle thread after the rocket leaves the pad
930 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
931 * altosui: Prevent voice altitude data from queueing up
932 * altosui: Use local .class files in the classpath
933 * altosui: Record flight number when scanning file, not when running
934 * altosui: eeprom files place 'boost' time in the flight number
936 * altosui: ensure that 'altosui' script is installed. Pass arguments
939 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
941 altos (0.7+53+g59798c6) unstable; urgency=low
944 * altosui: Abort flashing if debug port isn't working
945 * altosui: allow flashing to be canceled from the rom config dialog
946 * altosui: Hide internal rom config UI helper function
947 * altosui: Remove some debug printfs from AltosRomconfig class
948 * altosui: Post error dialog on invalid ROM config values.
949 * altosui: build Mac OS .zip file to include paths
950 * altosui: Report telemetry CRC errors in UI
951 * altosui: Deal with altos bug setting radio channel while monitoring
952 * altosui: Allow 'connect to device' when already connected
953 * Revert "altosui: Deal with altos bug setting radio channel while
955 * altosui: Must flush serial line after configuring for telemetry
956 * altosui: Catch I/O errors on telemetry device, report to user
958 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
960 altos (0.7+40+g59a40f6) unstable; urgency=low
963 * add distclean targets to libaltos and altosui to all Debian package
964 to build, and clean up other distclean content as needed
967 * altosui: missed AltosReader.class in the Makefile
968 * altos: Bounds check Skytraq GPS tracking data array
969 * altosui: Remove Manifest.txt from git repo as it's built now
971 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
973 altos (0.7+28+gd006c5e) unstable; urgency=low
975 * add runtime dependencies for altos binary package
977 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
979 altos (0.7+26+gc35632e) unstable; urgency=low
981 * don't build all the "fat" jar deliverables by default
983 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
985 altos (0.7+23+g25764fc) unstable; urgency=low
988 * fix up for an 0.7 release
989 * update changelogs for Debian build
992 * libaltos: AltusMetrum devices use more than one USB ID.
993 * altosui: provide separate flush_input/flush_output for serial. deal
994 with monitor automatically
995 * altosui: discard invalid lines while reading Eeprom flight data
996 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
997 * libaltos: Missing OS_LDFLAGS on cjnitest build
998 * libaltos: cjnitest needs altos_flush now
999 * altos: flush pending output when terminating packet mode
1000 * altos: Abort radio harder when terminating packet mode.
1001 * altos: shut down packet mode cleanly
1002 * libaltos: Fix windows build.
1003 * libaltos: Improve Makefile
1004 * Update telemetrum.inf to include all current USB ids.
1005 * libaltos: Add pre-built Mac OS X libaltos.dylib
1006 * libaltos: Add pre-built Windows .dll
1007 * altos: Windows sends USB Out packets of 0 length. Ack them.
1008 * libaltos: Use overlapped I/O on windows
1009 * altosui: Build linux, mac and windows archives on Linux
1010 * altosui: build debian-style altosui too
1011 * altosui: Devices with USB id 0x000a always get listed
1014 * continue even if rm's don't have anything to do
1015 * make invocation of 'install' pathless to work on more Unix variants
1016 * add a .gitattributes file, configuring the Mac and Windows binary
1019 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1021 altos (0.7) unstable; urgency=low
1023 * update changelogs for Debian build
1024 * fix up for an 0.7 release
1026 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1028 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1030 * fix path to installed shared library
1032 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1034 altos (0.6+373+gcf65c6b) unstable; urgency=low
1037 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1039 * altosui: Capture config and version info in .eeprom files
1040 * altosui: Merge gps date and time classes into gps class
1041 * altosui: Clear displayed data rows as needed.
1042 * altosui: Split status and info panels into separate files
1043 * altosui: Explicitly initialize Altos class
1044 * altosui: Split flight record out of telemetry class
1045 * altosui: Compute flight state from eeprom data
1046 * altosui: Add comments to Eeprom reader
1047 * altos: add callsign to packet mode, increase payload to 64 bytes
1048 * altosui: Start adding code to write csv files from eeprom/telem
1050 * ao-dumplog: add --channel option (for use with -R option)
1051 * libaltos: integrate Windows support.
1052 * altosui: Select devices by USB vendor/product ID.
1053 * altos: Define USB product ID in per-product Makefile.defs file
1054 * altosui: Make teledongle callsign configurable
1055 * altosui: Add TeleMetrum configuration
1056 * altosui: Set callsign when fetching eeprom data over the air
1059 * add freetts as a build dep
1060 * working on java packaging details
1063 * altosui: Add .ihx file reading code and stub out flashing UI
1064 * altosui: Add debug dongle API, split flash UI out
1065 * ao-dumplog: Fix --remote and --channel options to actually work
1066 * altosui: pad TM config dialog values to avoid clipping descenders
1067 * libaltos: use pipe to wake up getchar on close. use mutexes
1068 * altosui: Add lots more cc1111 debug interface functions
1069 * altosui: remove debug printf from AltosHexfile
1070 * altosui: flush serial output before waiting for reply
1071 * altosui: Remove debug printf from AltosRomconfig
1072 * altosui: Finish device programming code
1073 * altos: Place rom config variables in fixed location
1074 * altosui: make default Manifest look for built-in freetts
1075 * altosui: Separate out log file choosing dialog to share with CSV
1077 * altosui: refactor logfile chooser dialog to share more code
1078 * altosui: Add ability to create CSV file from telem or eeprom files
1079 * altosui: disable radio monitoring while using serial line for
1081 * altosui: Delay mapping Flash UI until flashing actually starts
1082 * altosui: fetch existing romconfig for flashing
1083 * altosui: always display romconfig ui while flashing
1084 * altosui: write USB serial number string while flashing
1085 * altosui: flush replies from serial link when entering debug mode
1086 * altos: always rebuild ao_product.c to track git version
1087 * altos: print GPS state flags in GPS 'g' command
1088 * altos: mark gps date written only after it gets into eeprom
1089 * altosui: Move number parsing code to Altos general class
1090 * altosui: Add AltosGreatCircle constructors
1091 * altosui: add rssi and distance/dir from pad to CSV files
1092 * altosui: AltosEepromReader was mis-setting boost tick
1093 * altosui: Add support for old (version < 3) telemetry files
1094 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1095 * altosui: When parsing saved telem files, errors shouldn't abort file
1096 * altosui: Remove debug printf from AltosState.java
1097 * altosui: command line args are converted to csv format
1098 * altos: prepare for sdcc 2.9.1
1101 * add a dummy install target
1102 * lose the prebuild hook for now while I'm fumbling
1103 * add install target for libaltos
1104 * add an install target for altosui
1107 * altosui: add elevation and range information
1110 * fix up the wrapper's path to the jar file
1111 * update Debian standards version
1112 * fix permissions on installed jar file, switch from ao-view to
1114 * install altosui man page
1115 * fix man page delivery path
1116 * Revert "lose the prebuild hook for now while I'm fumbling"
1118 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1120 altos (0.6+303+gb6da90b) unstable; urgency=low
1122 * add freetts as a build dep
1123 * move to science menu
1124 * working on java packaging details
1126 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1128 altos (0.6+292+g8fc261c) unstable; urgency=low
1130 * see if my new freetts package works
1132 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1134 altos (0.6+290+g7877496) unstable; urgency=low
1137 * altosui: check for closed serial device before reading
1138 * altosui: Remove unnecessary freetts .jar files
1139 * altosui: Close serial, join reader thread, free altos_file
1140 * altosui: remove debug printf
1141 * libaltos: build with java src encoding UTF8
1142 * altosui: construct Darwin application directory
1143 * Add Mac OS X packaging bits
1144 * altosui: Switch eeprom extension back to .eeprom
1145 * Moved Mac OS packaging to altosui dir
1146 * altosui: remove option to install to alternate volume
1147 * Make altosui test script executable
1149 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1151 altos (0.6+277+gd184819) unstable; urgency=low
1154 * fix text since TM only has one led to blink
1155 * add swig as a build dep
1156 * add a jdk to the build deps
1159 * When the EP0 IN buffer is full, don't panic, just skip sending
1161 * Add libaltos which talks to USB connected altos devices
1162 * Switch AltosUI to libaltos for device access
1163 * Present list of altos devices in nice format
1165 * Re-enable Linux support for altosui.
1166 * Darwin doesn't have strndup.
1167 * libaltos needs -I. on all systems
1168 * libaltos: make clean remove all built files
1169 * libaltos: build fat 10.5-compatible library
1170 * Add Mac OS X packaging files for altosui
1171 * Add application icons for Mac OS X
1172 * Clean up altosui build a bit
1173 * Remove directories as .class file dependencies; it makes them get
1174 rebuilt all the time
1175 * Java clean ups -- use varargs where possible, remove
1177 * Java voice reporting cleanups.
1178 * Force java source encoding to UTF-8
1179 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1181 * altosui: Catch errors opening USB devices. Limit list to relevant
1183 * Make voice and channel menus work.
1184 * Add voice test command for help in adjusting volume.
1185 * Remove debug printf
1186 * altosui: Add eeprom data capture function. No UI yet.
1187 * altosui: Add progress bar for eeprom downloading status
1188 * altosui: Fix Save flight data monitor layout, add cancel
1189 * altosui: Replace device dialog. Center eeprom monitor.
1190 * altosui: report rocket ground bearing at landing only if known
1191 * Reset GPS ready status when GPS comes unlocked on the pad
1193 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1195 altos (0.6+236+gcd8aa79) unstable; urgency=low
1198 * Telemetry code was mis-computing RSSI
1199 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1203 * significant documentation update
1204 * add build dep for sndfile
1205 * reflect documentation file name change
1206 * update to latest Debian standards version
1208 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1210 altos (0.6+224+g4766b13) unstable; urgency=low
1213 * documentation updates from Bob
1216 * Extension to KML output format, and minor bug fix
1219 * ao-view: disable radio telemetry monitoring during channel change
1220 * Add special code for USB panic's.
1221 * ao-postflight: was walking off state.data array
1222 * Abort any in-progress radio operation when changing radio channel
1224 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1226 altos (0.6+214+g16c4cae) unstable; urgency=low
1229 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1230 * merge a derivative of Bob Finch's mere mortals guide as getting started
1231 * merge the altusmetrum-themes package
1234 * Fix telemetrum.inf, tested by Adrian and Keithp
1235 * Finish basic flight monitoring UI with voice using FreeTTS
1237 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1239 altos (0.6+204+g6bd8513) unstable; urgency=low
1241 * lose the quotes since they apparently aren't necessary
1243 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1245 altos (0.6+202+gae6854d) unstable; urgency=low
1247 * update desktop file for conformance with current standards
1249 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1251 altos (0.6+200+g68eaaa6) unstable; urgency=low
1253 * add initial package build scripts for Arch Linux from Bob Finch
1254 * add desktop file provided by Bob Finch
1256 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1258 altos (0.6+195+gcde60f1) unstable; urgency=low
1260 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1262 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1264 altos (0.6+193+g314d27a) unstable; urgency=low
1267 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1269 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1271 altos (0.6+190+g8b6767e) unstable; urgency=low
1274 * Fix all stdio reading functions to be __critical
1275 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1277 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1279 altos (0.6+187+g8702f49) unstable; urgency=low
1282 * more text created during SFO->DEN flight
1283 * initial attempt at a telemetrum turn on script .. needs work
1286 * Revert "Add optional 's' command to packet slave to enable/disable
1288 * Disable interrupts while reading from stdin
1290 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1292 altos (0.6+180+g99094f0) unstable; urgency=low
1295 * Increase reset switch time to 100ms
1296 * Add optional 's' command to packet slave to enable/disable slave
1298 * More ALtosUI changes
1299 * Autodetect flite voice registration function
1302 * capture work done on SFO->DEN flight
1303 * add some RF usage information from an email reply sent today, and
1306 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1308 altos (0.6+171+g9394393) unstable; urgency=low
1314 * Only have the slave return a packet if it received one.
1316 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1318 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1321 * INSTALL file changed by auto tools
1324 * libflite may forget to reference libasound
1326 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1328 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1331 * Start adding java-based UI
1332 * Add telemetry data parsing code
1333 * Add Windows install .inf file
1334 * Fix windows install file
1335 * Add telem parsing code
1336 * Steal C code from ao-view
1337 * Display table of flight info. gps is not working yet though
1338 * Fix up table formatting
1341 * Clean up GPS data formatting
1342 * Report current gps nsat, not last locked nsat
1343 * Remove GPS data missing from skytraq. Save max height/accel/speed
1344 * Remove unused cell renderer class
1346 * Use RXTX for serial comm. Add logdir preference saving
1347 * Make ao_radio_idle keep trying to get the radio to idle.
1348 * Don't abort the radio when enabling telemetry monitoring
1349 * Clean up some altosui comments
1350 * Switch TeleMetrum from v0.2 to v1.0
1351 * Add Linux device discovery
1352 * Interrupt running replay thread when starting another replay
1353 * serial port read function cannot be interrupted. poll every 1 second
1354 * TD reports "not-connected" when GPS has 0 sats
1355 * Tasks may move in task structure as a result of ao_exit
1356 * Enable telemetry monitoring
1357 * Use 16-bit flite voice (which appears to have changed symbols
1359 * When changing RESET line, delay 20ms
1362 * choose a better set of docbook xsl files
1364 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1366 altos (0.6+131+g6629ec5) unstable; urgency=low
1368 * lose the url entirely for now
1370 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1372 altos (0.6+129+g934434f) unstable; urgency=low
1376 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1378 altos (0.6+127+g05ad583) unstable; urgency=low
1380 * need another build dep
1382 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1384 altos (0.6+125+g8f1d47e) unstable; urgency=low
1386 * make lintian happy
1387 * tweak copyright assertion
1388 * crudely incorporate "day in the life" info from web page
1389 * rewrite urls in docbook format
1391 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1393 altos (0.6+119+g00f49c8) unstable; urgency=low
1396 * update changelogs for Debian build
1397 * move gbp.conf into debian/
1398 * initial harness for documentation
1402 * Round radio calibration value instead of truncating
1403 * Document the ao-dumplog '--remote' flag for radio-link downloads
1405 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1407 altos (0.6+108+g6e61170) unstable; urgency=low
1410 * Need to duplicate new altitude conversion code in aoview.
1412 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1414 altos (0.6+106+ga1478f6) unstable; urgency=low
1417 * Add ao_radio_xmit to help test boards without flashing them.
1418 * Allow product names to have suffixes (like board revisions)
1419 * Fix and document the ao-rawload --run flag
1421 * Leave .ihx files in the build directory too - easier to debug that way
1422 * Eliminate deadlock when writing config from radio link
1423 * Fix up LED colors for each product.
1424 * Add .gitignore for ao-bringup
1427 * create a turn on script for lighting up TeleDongle v0.2 boards
1429 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1431 altos (0.6+95+g2f45953) unstable; urgency=low
1433 * update changelogs for Debian build
1434 * conditionalize use of git on executability of /usr/bin/git binary
1436 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1438 altos (0.6+88+gdeccc10) unstable; urgency=low
1440 * add gawk as a build dependency since strtonum is a gawk extension
1442 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1444 altos (0.6+86+g2491282) unstable; urgency=low
1447 * Disable monitor mode before attempting radio test.
1448 * Ensure that ao_alarm waits at least the specified time
1449 * Remove dbg driver code from telemetrum/teledongle
1450 * Add AT45DBxx1D driver
1451 * Remove green LED and temp sensor from v0.2 code
1452 * Add at45db161d.h header file for new flash part.
1453 * Add 'f' command to display flash status register contents
1454 * Dump more flash parameters for the flash_status command
1455 * Dump config block from read/write config and flash_status commands
1456 * Don't set ao_flash_setup_done until we're actually done.
1457 * Remove flash debugging printfs
1458 * Add simple gps dump command 'g'
1459 * Force idle mode by shorting the SPI clock to ground at boot time.
1460 * Switch to using internal cc1111 temperature sensor
1461 * Missing ao_mutex_put in gps_dump
1462 * Compute daytime using GPS as time base
1463 * Pull in a bit more data for filtering the start of the boost
1464 * Log GPS data on pad after boost detect.
1465 * Change barometer conversion code to shrink conversion table
1466 * Change altos build process to support per-product compile-time
1468 * Update .gitignore files
1469 * Quiet make output.
1470 * Add back stack size checking to altos linking phase
1471 * Must install .map files for ao-load to work
1473 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1475 altos (0.6+60+g10d1bbc) unstable; urgency=low
1478 * Use ao_radio_get/ao_radio_put in packet code.
1480 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1482 altos (0.6+58+gbbb152c) unstable; urgency=low
1485 * Re-order config values. Change frequency to cal
1486 * Allow radio calibration to be set from ao-load
1487 * Add --cal to man page
1489 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1491 altos (0.6+53+gcd49847) unstable; urgency=low
1494 * Remove send_serial and serial_baud commands.
1495 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1496 * Add radio calibration configuration.
1498 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1500 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1503 * Change default callsign to "N0CALL"
1505 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1507 altos (0.6+47+g4053309) unstable; urgency=low
1509 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1510 * change home URL in control file to be the AltOS page
1512 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1514 altos (0.6+43+gd6ba07e) unstable; urgency=low
1517 * Decode HDOP data from skytraq GPS
1518 * Document ao-postflight --gps and --kml options.
1519 * Make ao-postflight create filenames using input filenames.
1520 * Make TD print 0000-00-00 for invalid dates.
1521 * Fix --plot arg handling. Add -all option.
1522 * Convert telemetry file GPS satellite information in cc_log_read
1523 * Don't crash if --plot isn't passed on ao-postflight command line
1524 * ao-postflight: compute barometric alt for each GPS position
1525 * ao-postflight: don't try to use missing gps sat data
1526 * Automatically extract flight number for eeprom and telem filenames.
1528 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1530 altos (0.6+32+g87e6f3e) unstable; urgency=low
1533 * fix typo in comment
1536 * Reduce igniter firing time from 500ms to 50ms.
1537 * Add GPS date/time output to ao-postflight.
1538 * Eliminate SiRF state values from ao-view.
1540 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1542 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1545 * Add two-point accelerometer calibration.
1546 * Remove "l" command as ao-dumplong no longer uses it
1547 * Remove "d" command
1548 * Remove "f" command
1549 * Reformat ADC values to show all 16 bits
1550 * ao_flight_test was using accel value for pressure too
1551 * Pass accel calibration over telemetry stream. Telemetry data format
1553 * Add ability to dump eeprom data over radio link.
1554 * In packet master, move USB flush from packet thread to echo thread
1555 * In USB pollchar, wait for packet before re-checking USB out len
1556 * Explicitly use USB I/O routines in packet code
1557 * Flush pending input when switching to remote packet mode
1558 * Stop recording in ao-dumplog after receiving an invalid block
1559 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1560 * Add Watchdog Timer Control register definitions
1561 * Add reboot command.
1562 * Return radio to telemetry settings when packet system closed.
1563 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1564 * Loosen tolerances for main->landed transition
1565 * Provide a dummy 'uninstall' target in the src directory.
1566 * Share telemetry parsing code in cc library.
1567 * Enable telemetry receive in ao_view
1568 * Switch order of serial/flight in ao-postflight summary
1569 * Add flight number to telemetry stream.
1570 * Add date to GPS data, captured from GPRMC packet.
1571 * Stop using SiRF state info.
1573 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1575 altos (0.6) unstable; urgency=low
1578 * Add support for the SkyTraq GPS unit
1579 * Build two versions of TM, one for SiRF, one for SkyTraq
1580 * Save some DSEG space by marking cmd functions __reentrant
1581 * Add ao_wake_task and ao_exit
1582 * Add keyhole-markup generation for ao-postflight.
1583 * Initial packet bits. Just testing transmission
1584 * Add radio carrier command
1585 * Wait for TX to finish sending data
1587 * Remove reason from ao_dma_abort
1588 * Switch packet code from timer thread to ao_alarm
1589 * Use ao_radio_done to wait for TX to completely finish with packet
1590 * Send SYN packet to set sequence numbers
1592 * Do more flushing in packet test code
1593 * Use ao_alarm for ao_delay so it can be easily interrupted
1594 * Poke master to speed up packet rate when things are busy
1595 * No need to wakeup &ao_tick_count now
1596 * Enable packet-based communcation to command processor
1597 * Add more docs to the README file
1598 * Disable interrupts while removing tasks from task list
1599 * Add ao_usb_pollchar to ao.h
1601 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1603 altos (0.5+90+g127c312) unstable; urgency=low
1605 * de-version the libreadline-dev build dependency
1607 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1609 altos (0.5+86+g2de548f) unstable; urgency=low
1611 * automate push of updated and tagged master branch during
1612 debian/rules prebuild
1613 * flush repetitive junk out of debian/changelog, and update the
1615 * add support for tagging git repository on each Debian package build
1617 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1619 altos (0.5+77+gc57bd7f) unstable; urgency=low
1621 * build for Debian from git
1623 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600