1 altos (1.0.3) unstable; urgency=low
4 * lose the bluetooth lib dependency until it's relevant
5 * don't try to include bluetooth headers
6 * don't try to link bluetooth lib
7 * mention release notes in Releasing file prep stage
8 * more notes on release notes in Releasing
12 * altos: Create TeleMetrum v1.2 directory
13 * Add 1.0.3 release notes.
15 -- Bdale Garbee <bdale@gag.com> Sun, 25 Dec 2011 19:08:56 -0700
17 altos (1.0.2) unstable; urgency=low
20 * update release process docs
21 * update changelogs for Debian build
22 * include 1.0.1 release notes in docs, closes: #642705
23 * add run-time dependency on libjfreechart-java
26 * altos: Delay reboot by a second to avoid re-entering idle mode
27 * Bump to version 1.0.2
28 * altos: TM: Don't turn on packet slave mode until idle/invalid state
29 * doc: Add 1.0.2 release notes
31 -- Bdale Garbee <bdale@gag.com> Wed, 28 Sep 2011 01:58:27 -0600
33 altos (1.0.1) unstable; urgency=low
36 * use multimaint-merge to make Debian changelogs less ugly
37 * update TeleMini turnon script now that we've made a stable firmware release
38 * moving git-buildpackage config into .git/ since it is fairly specific to
39 Bdale's build environment, and doesn't need to be in the source package
40 * get ready for a 1.0.1 release
41 * update changelogs for Debian build
42 * fix telemini firmware path name
43 * ignore generated log file
44 * roll release notes version from 1.0 to 1.0.1
45 * roll back packaging changelog for rebuild
48 * altos: Clear callsign on initial config load
50 -- Bdale Garbee <bdale@gag.com> Fri, 26 Aug 2011 10:39:29 -0600
52 altos (1.0) unstable; urgency=low
55 * altos: Lost change that reported flight 0 when log memory was full
56 * altosui: Ancient log files used 'apogee' for 'coast' state
57 * altosui: Add 'On-board Data Logging' indicator to pad tab
60 * update changelogs for Debian build
61 * update changelogs for Debian build
64 * altosui: remove debug printf in pad pane
65 * altosui: Disable 'max flight log' config when there are stored flights
66 * altos: Merge common config code in ao_config.c
67 * Bump version to 0.9.7
68 * altos/altosui: Add ability to disable telemetry/rdf completely
69 * altosui: Clean up command line processing. Add --graph
70 * altos-fat/windows: Check and install Java 1.6 as needed
71 * altosui/windows: Fix a bunch of windows compiler warnings.
72 * altosui: Attempt to make both 32- and 64-bit windows DLLs
73 * doc: Add note about telemetry disable mode to 1.0 release notes
74 * doc: Add Installation Recommendations chapter
75 * altosui: Add a few simple unit conversions
76 * altosui: Capture date/time/serial/flight in AltosFlightStats
77 * altosui: Add date/time/serial/flight to flight stats tab
78 * altosui: Show filename in AltosGraph window
79 * altosui: Add --summary option to dump flight stats to stdout
80 * altosui: Make monitor-idle display correct 'On-board data logging' status
81 * altosui: Can't configure flight log max on TeleMini
82 * altosui: fix 'magic' string to signal end of config data
83 * altosui: Only 'show' config dialog once
84 * altosui: Reset all config data on 'reset' command
85 * altosui: Update mac os X library
86 * libaltos: fix Mac OS X function signatures
87 * altosui: add tool-tips to the button box.
90 * turn off auto-tagging during Debian build
91 * update changelogs for Debian build
92 * rewind changelog to 0.9.6.0 for rebuild
93 * update changelogs for Debian build
96 * altosui: Use system look&feel
97 * Remove stale tools (ao-dumplog, ao-postflight, ao-view)
98 * altosui: Add tool-tips to config dialogs
99 * altosui: Try to get dialogs to look a little better
103 * roll changelog back in prep for another test build
104 * update changelogs for Debian build
105 * add pkg-config to the build deps
106 * prepare for another rebuild
107 * update changelogs for Debian build
110 * altosui: Don't trust companion telemetry record 'channels' count
111 * altosui: Make flight monitor font size configurable
112 * altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
115 * doc tweaks through chap 3
118 * doc: Spelling corrections in altusmetrum.xsl
119 * doc: Document pad-mode 'on-board data logging' indicator
125 * doc: Describe packet command mode a bit better.
126 * doc: Move Packet Command Mode section to System Operations chapter
133 * doc: use 'radio link' to refer to packet command mode
139 * doc: Move updating device firmware section to separate chapter
140 * doc: Updating Firmware is now a separate chapter
146 * doc: Move the remaining command-mode descriptions to the appendix
152 * doc: Describe max flight log, ignite mode and pad orientation
153 * doc: Remove duplicate documentation about max flight log
158 * don't deliver sources.list fragment in official Debian packages
159 * changes in preparation for upload to Debian
160 * ao-view is no longer included in the altos package, so have the
161 old-style Debian menu entry point to altosui instead
162 * rewind packaging changelog to last tagged version
163 * update desktop file for consistency with package section
164 * we need a main category in the desktop file
165 * really, I mean it, no longer deliver the sources.list fragment
166 * add a postinst to remove sources.list.d fragment delivered by old
167 private versions of this package, no longer needed once we have
170 -- Bdale Garbee <bdale@gag.com> Thu, 25 Aug 2011 02:22:21 -0600
172 altos (0.9.6.0) unstable; urgency=low
175 * altos: Correct flight log max on Tm to 5k
176 * altosui: Change button to 'Configure Altimeter'
177 * altos: Remove pad_orientation functions from non-accel devices
178 * altos: Add ability to set arbitrary radio frequency
179 * altosui: Add dialogs to configure 'common' frequencies
180 * altosui: Convert from channels to frequencies
181 * Set version to 0.9.5.0
182 * altosui: altimeter is not spelled altimter
183 * altosui: Pull out BlueTooth support
184 * altos: minor type in comment about accel correction
185 * altosui: Must set radio calibration before radio setting
186 * altosui: A few misc cleanups.
187 * altosui: Have single radio_to_frequency function
188 * altosui: Save frequency after setting it in AltosFlightUI
189 * altosui: Show AltosFrequency in scan results
190 * altosui: Remove debugging printfs from AltosSerial
191 * altosui: Flush radio setting to serial device
192 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
193 * altosui: Reading serial from swing thread only bad if remote
194 * altosui: Make set of telemetries to use while scanning configurable
195 * altosui: Add close button to 'fire' dialog
196 * altos: Switch telemini from v0.1 to v1.0
197 * altosui: Don't export product defs from libaltos
198 * altosui: Ensure serial code tracks reply nesting correctly
199 * altosui: Ship TeleMini v1.0 firmware with fat blobs
200 * Altosui: Add flight statistics tab to graph window
201 * altosui: Add a 'Graph Flight' button to the 'landed' tab
202 * altosui: Prune telemetry file graphs to just the flight
203 * altosui: Plot reasonable data from Tm files
204 * altosui: Move launch-sites.txt file to altusmetrum.org
205 * Bump version to 0.9.6.0
206 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
207 * doc: Document Ignite Mode and Pad Orientation configuration options
208 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
209 * doc: Add telemetry docs to debian/linux/mac/windows packages
210 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
211 * doc: Add 1.0 release notes.
212 * altos: Pull igniter pins low as soon as possible at boot time
213 * altos: Apply igniter boot pulse-width reduction to telemini
214 * altos: remove monitor disable stubs from altimeter code
215 * ao-tools: ao-list was crashing with more than 3 devices connected
216 * libaltos: Mis-allocated device list in libaltos
217 * altos: shrink text space from ao_config.c
218 * altos: re-write a bit of GPS parsing code to reduce size
219 * altos/altosui: Report log format in the version command
220 * altos: Don't try to use non-basestations for remote eeprom download
221 * altos: Add SPI-based companion board support
222 * altos: Put SPI in slower mode when talking to companion board
223 * altos: Make sure companion task exits cleanly when done
224 * altos: add the 'L' command to show the status of a linked companion board
225 * altos: Check for companion init packet validity was busted
226 * altosui: Add companion support to the flight UI and CSV conversion
227 * altos: Send SPI message at flight state changes
228 * altos: Send serial/flight to companion board
229 * altos: wait 10s for companion to boot
230 * altosui: Clean up eeprom parsing a bit
231 * altosui: Add support for TeleScience eeprom download
232 * altosui: Devices with log-format can also delete flights
233 * altosui: Eliminate inter-chunk flush_input calls
234 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
235 * altos: Correct AO_CONFIG_MINOR from 6 to 7
236 * altos: Reset radio channel to zero when using radio setting
237 * altos: use raw height while waiting for landing
238 * altosui: don't set channel when using radio setting
239 * altosui: Respect storage limits in flight log max config
241 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
243 altos (0.9.4.5) unstable; urgency=low
246 * altosui: Mark empty eeprom records 'invalid', don't generate exception
247 * altosui: Always read whole eeprom block, even at end of flight
248 * altosui: Display eeprom parsing errors to user
249 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
252 * src/ao_cmd: Shave off bytes from doc strings
255 * altos: Oops. Lost a couple of commands when merging the doc patch
256 * altosui: Missed jcommon.jar in the Mac OS install image
257 * Bump published version number to 0.9.1
258 * aoview: remove -s option.
261 * ao_intflash: Use internal flash for storage
264 * altos: Make serial, usb, beeper and accelerometer optional components
265 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
266 * altos/test: Add baro-only flight test program
267 * altos: Start with packet slave running. Turn off in pad mode.
268 * altos: Add TeleMini v1.0
271 * ao_intflash: Avoid overwriting code
274 * altos: Switch LED usage for TeleMini around
275 * altos: Switch pins around for TeleMini
276 * bringup: Add script for telemini
277 * ao-load: Make usb descriptor rewriting optional
278 * altos: oops -- altitude reporting wasn't pausing between signals
279 * altos: Internal flash ops block when running from flash
282 * ignore new flight test file
285 * altos: Add tiny logging for TeleMini/TeleNano
286 * altos: Add kalman filters for baro-only boards
287 * altos: Tiny logging fixes. Scan at start, stop when land or full.
288 * altos: Add TeleNano support
291 * fix up script to work and have reasonable texts
294 * altos: Fix mini/nano default log size to available flash space
295 * altos/test: Add scripts to run lots of flights through the code
296 * altos: Write height values to log for nano/mini
297 * altos: Baro-only boards must not detect launch on accel or speed data
298 * altosui: Add software version to Configure AltosUI dialog
299 * altos: Don't init packet slave on TD. Make slave start optional
300 * altos: Configure packet size from send/recv parameters.
301 * altos: Make telemetry interval more consistent
302 * altos: Split out tiny telemetry from full telemetry
303 * altos: Split telenano main from telemini
304 * altos: The kalman code requires a constant sample rate
305 * altos: New telemetry report format (version 4). Supports tiny telemetry.
306 * altos: Add .sdcdbrc file for teledongle
307 * altos: Add nickle kalman implementation.
308 * altos: Switch telemetrum over to kalman filter
309 * altos: Compute a 'trust' value for the barometer
310 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
311 * altos: Clean up some debug stuff in ao_flight.c
312 * altos: Add ao_flight_debug code
313 * altos: Missing parens and some bad arithmetic in the kalman code
314 * altos: Fix up flight code testing
315 * altos: Restore sensible kalman values
316 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
317 * altos: Exit flight test at landing. Allow description in test flight list
318 * Add ao_kalman.h to .gitignore
319 * Add description to test flights
320 * altosui: Add support for telemetry version 4
321 * altosui: Add telemetry format menu and preferences
322 * altosui: Remove a bunch of debug printfs from the eeprom manager code
323 * altosui: Add support for downloading TeleMini/TeleNano flight logs
324 * altosui: Remove extra AltosEepromBlock layer
325 * altosui: swing hide/show methods are deprecated
326 * altosui: Allow TM config connection to be canceled.
327 * altos: Variable log rate in full logging code too
328 * altos: full logging must flush pending data before checking state
329 * altosui: Off-by-one error in telemetry format configuration UI
330 * altosui: Allow radio channel to be configured over the radio link
331 * altosui: Tell serial device which frame to use for timeout dialogs
332 * altosui: Handle serial calls from swing thread
333 * altos: Split up flight code into separate flight/sample/kalman bits
334 * altos: Create custom nano flight code
335 * altosui: Clean up packet link connecting dialog
336 * altosui: Make flight log downloading handle 'Connecting...' dialog
337 * altosui: Make deployment testing handle Connecting... dialog
338 * altosui: Display exception messages from swing thread
339 * altosui: Don't display 0000-00-00 for missing flight log dates
340 * altos: ao_sample_preflight was exiting preflight mode immediately
341 * altos: Run RDF beacon after apogee instead of waiting for landing
342 * altos: Enable logging during nano flights
343 * altosui: Parse and export Max flight log value
344 * altosui: Only plot acceleration when present in data file
345 * altos: Reflect ao_flight split in ao_flight_test dependencies
346 * altos: Baro useful ceiling is MSL, not AGL
347 * altos: Make ao_flight_test show true height but report saturated height
348 * altos: Add initial TeleBT code
349 * altos: Add P2SEL_*_MASK defines to cc1111.h
350 * altos: expose set of available stdio values
351 * altos: Provide for a pre-filter on commands
352 * altos: Allow any stdio to be used with packet forwarding
353 * altos: Remove serial monitor command
354 * altos: Make ao_serial_drain public
355 * altos: Clean up usage of serial port for stdio
356 * altos: Clean up serial initialization
357 * altos: Make cmd echo per-connection instead of global
358 * altos: Clean up BT serial communcations
359 * altosui: Add missing AltosTelemetryMap.java file
360 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
361 * altosui: Add TeleBT USB device support
362 * altosui: Add low-level Bluetooth APIs
363 * altos/altosui: Log averaged baro sensor data in Tm/Tn
364 * altosui: oops - lost state changes when downloading eeprom data.
365 * altos: Write a few pre-launch samples for Tm/Tn devices
366 * altosui: Add primitive bluetooth device manager UI.
367 * altosui: Create abstract AltosDevice class
368 * altosui: Make AltosBTDevice implement AltosDevice interface
369 * altosui: Make bluetooth dialog modal
370 * altosui: Use persistent list of bluetooth devices for device dialogs
371 * altos: Add delays to bt startup sequence
372 * altosui: Wait two seconds after bluetooth connect XXX
373 * altos: Solidify BT connections
374 * altos: Simplify BT communications
375 * altos: Remove bt debug command
376 * altos: remove BT logging code
377 * altosui: Eliminate ao_cmd_filter hook
378 * altosui: Make flight data download work through TeleBT
379 * altos: add telebt-v0.0 Makefile
380 * altosui: Separate out flash debug code to separate thread
381 * altosui: Fix TeleBT name in flight monitor title
382 * altosui: Display reader name (usually the device) when an I/O error occurs
383 * altosui: Move AltosIgniteUI device open out of Swing thread
384 * altosui: Fix BT manage dialog so that the device lists resize
385 * altos: Add preliminary telebt v0.1 defines
388 * first cut at a telebt turn on script
391 * altos: Add telebt-v0.1 to Makefile
392 * altos: Use USART configuration 1 with flow control for TBT
393 * altos: Fix BT link status pin for real TBT hardware
394 * altos: pull TBT v0.1 ser_reset line low
395 * altos: Add beeper to TBT v0.1
396 * altos: Debugging TBT issues -- check pin configuration after boot
397 * altos: Initialize beeper for telebt
398 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
399 * altos: clear CPU port 1 interrupt flag when handled
400 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
401 * Switch version to 0.9.4
402 * altosui: Handle old TeleDongle receiving kalman telemetry packets
403 * altos: Rename telemetry to telemetry_orig
404 * altos: Add arbitrary telemetry packet monitoring
405 * altos: Add checksum to TELEM output lines
406 * altos: Start adding new telemetry frame definitions
407 * altos: ao_radio_recv needs byte count *including* rssi and status
408 * altosui: Support raw telemetry from TeleDongle
409 * doc: Add telemetry format description
410 * doc: Complete initial telemetry description
411 * doc: Fix a few minor telemetry doc mistakes
412 * Version strings must be < 8 bytes long
413 * altos: teledongle does not need ao_packet_slave.c
414 * altos: Shrink const space in ao_config
415 * altos: Add sat info to GPS report command
416 * altos: Shrink help text
417 * altos: Add split telemetry code
418 * altos: Complete new telemetry switchover
419 * altosui: Parse remaining standard telemetry packets
420 * doc: Chang Config and Location packets
421 * altos: Adapt to changes in telemetry Configuration packet
422 * doc: Add section about TeleDongle USB line format
423 * altosui: Elide nul bytes at end of telemetry string values
424 * altosui: Elide missing values from graphs
425 * altosui: Add main/drogue voltages to default graph
426 * altosui: Remove debug printf.
427 * altosui: Compress telemetry records marked with the same time
428 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
429 * altos: Shrink ao_config_callsign_set
430 * altos: Shrink ao_add_task by rolling up a memset loop
431 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
432 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
433 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
434 * altos: Switch ao_report.c __xdata to __pdata
435 * altos: Switch ao_rssi.c __xdata to __pdata
436 * altos: Switch ao_sample.c __xdata to __pdata
437 * altos: Switch ao_serial.c __xdata to __pdata
438 * altos: Switch ao_stdio.c __data to __pdata
439 * altos: Switch ao_telemetry.c __xdata to __pdata
440 * altos: Switch ao_usb.c __xdata to __pdata
441 * altos: Switch const for __code in struct ao_cmds
442 * altos: switch ao_cmd __xdata to __pdata
443 * altos: Switch ao_config.c __xdata to __pdata
444 * altos: Switch ao_dbg.c __xdata to __pdata
445 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
446 * altos: Switch flash drivers __xdata to __pdata
447 * altos: Switch Tm and Tn to common telemetry code
448 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
449 * altos: Ensure low-rate telem packets interleave with sensor telem packets
450 * altos: product defines are always in ao_product.h
451 * altosui: Build device constants into .java code
452 * altosui: Don't show missing igniter and gps values
453 * altos: new versions of sdcc require __ prefixes for custom keywords
454 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
455 * altosui: Start adding support for scanning radio for available devices
456 * altosui: Pop up monitor window from scan dialog
457 * altosui: Remove debugging printf from AltosLog
458 * altosui: Configuration telemetry record includes flight number
459 * altosui: Finish radio scanning UI
460 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
461 * altosui: Initialize channel and telemetry before use in ScanUI
462 * altosui: Set 'seen' bits in legacy telemetry packet reader
463 * altosui: Add map preloading GUI
464 * altosui: Try to avoid resize weirdness with map preloading
465 * altosui: Flush telemetry lines before starting to watch for scan results
466 * altosui: Display full map preload area in view.
467 * altosui: Remove a bunch of sitemap debugging printfs
470 * altosui: Make sure degree and minute values are visible (map preload)
473 * Set version to 0.9.4.4
474 * altos, altosui: Add igniter mode (dual, apogee, main)
475 * altosui: Download list of site locations for map preloading
476 * altosui: Add launch-sites.txt
477 * altosui: Add a bunch more site locations
478 * altosui: Mark preload site location with red circles (like launch)
479 * Fix NCR Pawnee location
480 * Add HARA Bragg Farms site
481 * altosui: Change continutity colors to yellow/magenta
482 * altos: Add ability to read new TELEM files to ao_flight_test
483 * altos: Average height values for landing detection
484 * altos: Reduce height averaging filter time constant
485 * altos: Require sequencing through 'main' state before landing
486 * altosui: Standard text field in flight UI needs more width (now 20)
487 * altosui: Parse accel cal from 'c s' command
488 * altosui: Simple timeouts don't work with query data
489 * altosui: Add idle monitor dialog
490 * altos/altosui: Add pad orientation configure option
493 * update version for a Bdale build for use turning on TeleMini v1.0
494 * simplify version in last changelog entry so git-dch is less confused
495 * update changelogs for Debian build
496 * update changelogs for Debian build
497 * stop doing automatic tag push during builds
498 * build depend on bluetooth dev package
499 * clean up all existing lintian warnings
500 * rewind changelog for re-build of 0.9.4.5
502 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
504 altos (0.9.1) unstable; urgency=low
507 * ao-load: fix usage message to note that '=' is required for options
508 * altos/test: Add dependencies in the Makefile for ao_flight_test
509 * altos/test: auto-configure acceleration parameters from the log file
512 * ao_radio: generalise setup of packet size
513 * src/ao_gps_skytraq: simplify parsing code
514 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
517 * tie bringup scripts to Bdale's bench TeleDongle
519 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
521 altos (0.9) unstable; urgency=low
525 * update changelogs for Debian build
526 * update turnon script to prefer TeleDongle as programmer
529 * altos: Program default flight log max value for new boards
531 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
533 altos (0.8.1+81+g4ae724f) unstable; urgency=low
535 * we need an install target to prevent parent dir make from failing
537 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
539 altos (0.8.1+79+g9a5666f) unstable; urgency=low
542 * doc: Don't delete telemetrum-outline.pdf
543 * doc: Add v0.9 features from altosui to documentation.
546 * add 0.9 revision entry, with caveat about telemetry format change
547 * freshen copyright year
550 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
551 * fat: Add docs to Linux package
552 * doc: Build with 'make all' from top level. Build with 'make fat'
554 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
556 altos (0.8.1+71+gda42f40) unstable; urgency=low
559 * doc: Add telemetrum mounting template in svg and pdf forms
562 * Re-order and re-arrange eeprom download dialog
563 * Convert EepromSelect dialog to use a GridBag
564 * Close serial port if Download/Delete dialog is cancelled.
567 * altosui: Reset eeprom download instance variables before reading
569 * altosui: Make serial debug more complete and accurate
570 * altosui: Use long input flush timeout when remote.
571 * altosui: Remove debug message when eeprom downloads are complete.
572 * altosui: Ensure serial device is closed after eeprom download
574 * altosui: Require 4 sats to light up the 'GPS locked' light.
575 * doc: inkscape tracks the filename inside the document
576 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
577 * altos: Flush log when full
580 * altos: Restructure skytraq NMEA parsing code to save some space
583 * altos: average 512 accel/baro samples at startup instead of 1000
586 * altos: Added check for an accel value above 1.5g
587 * altos: Added check for out of bounds accel
590 * altos: Add DATA_TO_XDATA to linux test harness
591 * altosui: Remove spurious colons from eeprom selection headers
594 * Rework invalid accel cal detection code
597 * altos: Auto-calibrate linux-based flight testing code
598 * altos: Ensure flight code gets first crack at new ADC data
599 * altos: Sample the accelerometer reference voltage on v1.1 boards
600 * altos: Optimize fetching of ADC data in flight code
601 * altos: Use 5V reference data to correct accelerometer measurements.
602 * doc: Remove mention of ao_wake_task
605 * update documentation to reflect reality that modifying a board for
606 separate pyro battery is not trivial
608 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
610 altos (0.8.1+42+g646e192) unstable; urgency=low
613 * altosui: Show dialog after successful delete or when no flights
614 * altosui: Ensure serial line is flushed after disabling remote link
615 * altosui: Add preference for serial debugging.
617 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
619 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
622 * altos: Add configuration parameter for maximum flight log size
623 * altos: support storage of multiple flights.
624 * altos: Speed up at45 and 25lc erase speeds
625 * altos: white space fix
626 * altos: report flight log offsets in hex block numbers instead of
628 * altos: ensure erase mark is written when erasing flights
631 * altos: Optimize Morse code generation
634 * altos: Check requested log max size against available space
635 * altos: Check for full log and complain
636 * altosui: Add configuration of flight log size
639 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
640 * altos: Remove redundant initialization of ao_interval variables
643 * altosui: Split eeprom download code apart
644 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
646 * altosui: Add support for parsing list of flights from the 'l'
648 * altosui: Add eeprom 'manage' ui to download and delete multiple
650 * altos: check for valid flight number in ao_log_delete
652 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
654 altos (0.8.1+18+g408a3e0) unstable; urgency=low
657 * altosui: move maps to subdir, fix E/W mismatch
660 * altos: clean up radio abort paths. Share radio code.
661 * altos: eliminate ao_wake_task
662 * windows: Add compatibility IDs to telemetrum.inf
663 * windows: Update NSIS installer file to use compatibility IDs
664 * altos: Split out SPI driver.
665 * altos: Add telemetrum-v1.1 directory
666 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
667 * altos: Simplify storage API
668 * altos: Require manual flight erasing.
669 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
670 * altos: Rip out 'optimization' in ao_log_scan
671 * altos: Mark end of available flight list with 'done' to make the UI
673 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
675 altos (0.8.1+4+gea95c06) unstable; urgency=low
677 * fix symlink paths in rules file
679 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
681 altos (0.8.1+2+gea7130e) unstable; urgency=low
683 * modify Debian package build to deliver one copy of background.png
686 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
688 altos (0.8.1) unstable; urgency=low
691 * moved doc dir in web content to AltOS tree
692 * fix publish target in doc/Makefile
693 * fix section layering
694 * fix an Altos vs Altus typo in the docs
695 * adding Bdale's release process document to the source tree
698 * windows: Add jfreechart.jar and jcommon.jar to windows install image
699 * Move "Releasing" to top level
700 * Add minimal release testing plan to Releasing
705 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
707 altos (0.8) unstable; urgency=low
710 * altosui: Correct windows hardware IDs for nsis installer file
711 * windows: try harder to get windows install to work
712 * windows: remove some non-existent .inf file section references
713 * windows: more .inf file hacking
714 * windows: Bump .inf file version
717 * declaring 0.8 released
718 * update changelogs for Debian build
719 * update changelogs for Debian build
720 * rewind changelog to recover from stupid build failure
722 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
724 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
727 * altosui: Split out flight monitoring to separate window
728 * altosui: Create buttons for main actions
729 * altosui: Fix channel setting at serial open time
730 * altosui: Fix more calls to AltosPreferences.channel()
731 * altosui: Create abstract interface for flight data display
732 * altosui: Add tab UI with 'pad' mode.
733 * altosui: Add ascent, descent and landed tabs
736 * Updated PKGBUILD-git.altos
739 * altos: Use grey leds when unlit - easier to see
742 * use value_font for values
743 * add --replay command line argument
744 * read preferences for --replay
745 * reduce font size for FlightInfoTable
746 * use grayled.png for off
747 * add compass bearing to voice output
748 * add compass bearing during descent
749 * add site map tab, at least for QRS launches
751 * make infotable scrollable, revert its fontsize to 14
752 * pull up maps for arbitrary locations
753 * better error behaviour if no map
756 * first cut at instructions on how to re-flash TM and TD devices based
758 * fold in content from Keith's email on the re-flashing subject
761 * altosui: Add RF calibration to TeleMetrum config dialog
764 * AltosTelemetryReader: actually open serial port
765 * AltosSiteMap: add targeting circles around landing site
768 * continuing to work on the docs
771 * altosui: Eliminate unncessary import altosui lines
772 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
773 * altosui: Replace flight status table with labels, fix resize.
774 * altosui: With --replay option, exit when replay window is closed
775 * altosui: oops, missed a file in the previous commit
776 * altosui: eliminate menu bar, moving elements to buttons.
777 * altosui: add reboot button to telemetrum configuration UI
780 * add a paragraph about forcing TM back to idle mode if an accel cal
784 * altosui: Add callsign configuration in AltosUI configuration dialog
785 * altosui: Cleanup flight UI layout
786 * altosui: Add igniter status to ascent and descent tabs
789 * altosui: tile site maps
790 * AltosSiteMapTile: autoscale to about 2 nmi per tile
791 * AltosSiteMapTile: adjust centering calculation
792 * AltosSiteMapTile: adjust scale to 1 nmi per tile
795 * altosui: Add igniter ground testing code
796 * altosui: Unify datafile selection to AltosDataChooser
797 * altosui: Clean up global AltosUI configuration settings dialog
798 * doc: Add preliminary altosui documentation
799 * doc: git ignore generated doc files
800 * doc: Document the 'Flash Image' operation.
801 * altosui: Use timeouts to recover from broken packet links.
804 * update turnon scripts to use stashed copies of stable release
808 * altosui: switch channel selector to combo box. Shorten displayed
810 * altosui: When switching log files, don't terminate log thread
811 * altosui: calling thread.interrupt with null thread doesn't work well
812 * altosui: Initialize display thread state in constructor instead of
814 * altosui: Fix channel changing in flight UI to actually work
817 * AltosSiteMap: add autoscroll and grabndrag scroll
818 * AltosSiteMapTile: seperate map and drawing layers
819 * AltosSiteMap: automatic fetching of map data
820 * AltosSiteMapTile: draw boost circle as well as landed
821 * AltosAscent/Descent: tidy up layout
822 * AltosDescent: switch elev from height to range
828 * AltosSiteMap: major refactoring
832 * altosui: change descent tab formatting to four columns
835 * AltosSiteMap: be more polite about preferred size
839 * altosui: Rewrite info table to mix with scroll pane well. Fix
843 * AltosSiteMap: better gps check, lower zoom
846 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
849 * AltosSiteMap: explain tile size better
850 * AltosSiteMap: extend map if rocket goes far away
851 * AltosSiteMap: try to get new tile construction right
852 * AltosSiteMap: thread safe tile addition
853 * AltosSiteMap: refactor tile collection
854 * AltosSiteMap: never accept 0,0 as lat/long
855 * AltosSiteMap: limit nr of tiles to 200x200
858 * altosui: When fixing eeprom gps time information, make GPS data
862 * AltosSiteMap: ensure buffer around active tile
863 * altosui: improve sitemap scrolling behaviour
864 * altosui: keep sitemap more centred on rocket
867 * altos: Add on/off modes to 'C' command
870 * Added PKGBUILDs for deps into contribs
873 * altosui: Close serial port when debug link fails
874 * altos: assume igniter worked.
877 * add a rudimentary --help for command line use
880 * doc: Add internal documentation for AltOS
883 * altosui: don't switch away from user selected tab
884 * altosui: sitemap uses rocket gps if no pad gps
887 * merge Keith's AltosUI documention into "the big book"
888 * lose the placeholder on how GPS works, as it's going to be a
891 * altos: remove unused variable from ao_igniter
892 * altos: Don't abort radio transmissions with ao_radio_abort
893 * altos: Make radio test command careful with the radio mutex.
894 * altosui: Make AltosSerial.flush_input keep reading while non-empty
895 * altosui: New AltosSerial.set_radio function sets channel/call
896 * altosui: Disable radio configation over packet link.
897 * altosui: Let people fire igniters that don't read as 'ready'
898 * altosui: Make sure packet mode is turned off when the connection
902 * docs: Document altosui "Graph Data" button
905 * Move altosui to the top level, placing libaltos inside it.
908 * doc: Document altosui "Site Map" tab
911 * Missing change to top level Makefile to build altosui
914 * fix missing section close in Site Map content
916 * manually fold in documentation work from the master branch
919 * doc: Reformat altos to use sections for each function
920 * doc: Add more authors, fix URL formatting, note that AltosUI
922 * doc: Rename telemetrum-doc as altusmetrum
926 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
928 altos (0.7.1+36+g811ced6) unstable; urgency=low
931 * remove the csv build dep, as that code will be abandoned
934 * altosui: Remove ability to graph data in .csv files
935 * altosui: Separate out jfreechart and jcommon directories
937 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
939 altos (0.7.1+32+g8103432) unstable; urgency=low
941 * add build-dep on libcsv-java
943 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
945 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
948 * make the column headers comma separated, too, so they align with the
952 * altosui: set default .csv file name in file save dialog
953 * altosui: Remember directory containing firmware files
957 * Add JFreeChart to Makefile.am
960 * altosui: Use recorded ground acceleration when reading eeprom files
961 * altosui: Write raw sensor data to .csv files
962 * altosui: Factor some UI elements into separate classes
963 * altosui: remove unused ReplayThread wrapper classes
964 * altosui: Require 4 sats for 'good' GPS data
965 * altosui: Create iterables for log file scanning. Split out display
967 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
969 * altosui: Deal with eeprom dates going backwards across wrap
972 * Hax0r graphing to support telem/eeprom files
975 * altosui: use Altos constants in graphing code
978 * Add callsign/serial/flight to graph title
981 * altosui: Add KML file export.
984 * add build dep on jfreechart lib
986 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
988 altos (0.7.1) unstable; urgency=low
991 * Add firmware and libaltos to 'fat' target at top-level
992 * altosui: Remove some debug printfs.
993 * altosui: libaltos.so is built with libtool -- it's in
995 * Add --with-fat-dir configure option to publish finished stand-alone
997 * altosui: Fix telemetry file reader to handle tick count wrapping
998 * altosui: Remove debug printfs from AltosTelemetryReader
999 * altosui: Fill in time value of last Eeprom record read from file
1000 * altosui: Stop parsing eeprom file after hitting 'landed' state
1002 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
1004 altos (0.7+96+g48f5799) unstable; urgency=low
1007 * altosui: conflating USB product and vendor IDs is a bad idea
1009 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
1011 altos (0.7+94+g1ac3d7e) unstable; urgency=low
1013 * initial cut at an altosui man page
1015 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
1017 altos (0.7+92+g0ea7576) unstable; urgency=low
1020 * handle versioning of ihx files (poorly) by just wildcarding the file
1024 * altosui: Need to have JVM include path substituted into libaltos
1026 * altosui: Store libaltos.so in $(libdir)/altos
1027 * altosui: Display error dialog when AltOS JNI library can't be loaded
1029 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
1031 altos (0.7+86+g6c0ae7e) unstable; urgency=low
1034 * altosui: Add explicit requirement to create classes directory
1035 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
1037 * altosui: hack to make JAVAROOT directory get created before javac
1039 * altosui: remove FATJAR from all-local to avoid building fat .jar
1043 * add libtool to build deps
1046 * altosui: Add windows installer build using 'nsis'
1047 * altosui: ignore built files
1048 * altosui: oops. renamed the nsis file to altos-windows.nsi
1049 * icon: add some icons for application programs
1050 * altosui: Add icons to application and Windows menus.
1051 * Use autotools for altosui and libaltos
1052 * altos: add some SDCDB config files
1053 * Ignore libtool files.
1054 * Add version numbers to released files. Set version to 0.7.1
1055 * Add top-level 'fat' target to aid building distribution files
1056 * altosui: Fix windows installer to ship correct files
1057 * altosui: Fix up Mac OSX .zip file
1058 * altosui: Fix linux fat distribution
1059 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
1060 * altosui: Remove debugging printf from AltosEepromReader
1061 * altosui: Eeprom files contain only one date; save it.
1062 * altosui: Add elevation and range data to main display
1063 * altosui: When replay thread is interrupted, don't make final report
1064 * altosui: Start idle thread after the rocket leaves the pad
1065 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
1066 * altosui: Prevent voice altitude data from queueing up
1067 * altosui: Use local .class files in the classpath
1068 * altosui: Record flight number when scanning file, not when running
1069 * altosui: eeprom files place 'boost' time in the flight number
1071 * altosui: ensure that 'altosui' script is installed. Pass arguments
1074 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
1076 altos (0.7+53+g59798c6) unstable; urgency=low
1079 * altosui: Abort flashing if debug port isn't working
1080 * altosui: allow flashing to be canceled from the rom config dialog
1081 * altosui: Hide internal rom config UI helper function
1082 * altosui: Remove some debug printfs from AltosRomconfig class
1083 * altosui: Post error dialog on invalid ROM config values.
1084 * altosui: build Mac OS .zip file to include paths
1085 * altosui: Report telemetry CRC errors in UI
1086 * altosui: Deal with altos bug setting radio channel while monitoring
1087 * altosui: Allow 'connect to device' when already connected
1088 * Revert "altosui: Deal with altos bug setting radio channel while
1090 * altosui: Must flush serial line after configuring for telemetry
1091 * altosui: Catch I/O errors on telemetry device, report to user
1093 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
1095 altos (0.7+40+g59a40f6) unstable; urgency=low
1098 * add distclean targets to libaltos and altosui to all Debian package
1099 to build, and clean up other distclean content as needed
1102 * altosui: missed AltosReader.class in the Makefile
1103 * altos: Bounds check Skytraq GPS tracking data array
1104 * altosui: Remove Manifest.txt from git repo as it's built now
1106 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
1108 altos (0.7+28+gd006c5e) unstable; urgency=low
1110 * add runtime dependencies for altos binary package
1112 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
1114 altos (0.7+26+gc35632e) unstable; urgency=low
1116 * don't build all the "fat" jar deliverables by default
1118 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
1120 altos (0.7+23+g25764fc) unstable; urgency=low
1123 * fix up for an 0.7 release
1124 * update changelogs for Debian build
1127 * libaltos: AltusMetrum devices use more than one USB ID.
1128 * altosui: provide separate flush_input/flush_output for serial. deal
1129 with monitor automatically
1130 * altosui: discard invalid lines while reading Eeprom flight data
1131 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
1132 * libaltos: Missing OS_LDFLAGS on cjnitest build
1133 * libaltos: cjnitest needs altos_flush now
1134 * altos: flush pending output when terminating packet mode
1135 * altos: Abort radio harder when terminating packet mode.
1136 * altos: shut down packet mode cleanly
1137 * libaltos: Fix windows build.
1138 * libaltos: Improve Makefile
1139 * Update telemetrum.inf to include all current USB ids.
1140 * libaltos: Add pre-built Mac OS X libaltos.dylib
1141 * libaltos: Add pre-built Windows .dll
1142 * altos: Windows sends USB Out packets of 0 length. Ack them.
1143 * libaltos: Use overlapped I/O on windows
1144 * altosui: Build linux, mac and windows archives on Linux
1145 * altosui: build debian-style altosui too
1146 * altosui: Devices with USB id 0x000a always get listed
1149 * continue even if rm's don't have anything to do
1150 * make invocation of 'install' pathless to work on more Unix variants
1151 * add a .gitattributes file, configuring the Mac and Windows binary
1154 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1156 altos (0.7) unstable; urgency=low
1158 * update changelogs for Debian build
1159 * fix up for an 0.7 release
1161 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1163 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1165 * fix path to installed shared library
1167 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1169 altos (0.6+373+gcf65c6b) unstable; urgency=low
1172 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1174 * altosui: Capture config and version info in .eeprom files
1175 * altosui: Merge gps date and time classes into gps class
1176 * altosui: Clear displayed data rows as needed.
1177 * altosui: Split status and info panels into separate files
1178 * altosui: Explicitly initialize Altos class
1179 * altosui: Split flight record out of telemetry class
1180 * altosui: Compute flight state from eeprom data
1181 * altosui: Add comments to Eeprom reader
1182 * altos: add callsign to packet mode, increase payload to 64 bytes
1183 * altosui: Start adding code to write csv files from eeprom/telem
1185 * ao-dumplog: add --channel option (for use with -R option)
1186 * libaltos: integrate Windows support.
1187 * altosui: Select devices by USB vendor/product ID.
1188 * altos: Define USB product ID in per-product Makefile.defs file
1189 * altosui: Make teledongle callsign configurable
1190 * altosui: Add TeleMetrum configuration
1191 * altosui: Set callsign when fetching eeprom data over the air
1194 * add freetts as a build dep
1195 * working on java packaging details
1198 * altosui: Add .ihx file reading code and stub out flashing UI
1199 * altosui: Add debug dongle API, split flash UI out
1200 * ao-dumplog: Fix --remote and --channel options to actually work
1201 * altosui: pad TM config dialog values to avoid clipping descenders
1202 * libaltos: use pipe to wake up getchar on close. use mutexes
1203 * altosui: Add lots more cc1111 debug interface functions
1204 * altosui: remove debug printf from AltosHexfile
1205 * altosui: flush serial output before waiting for reply
1206 * altosui: Remove debug printf from AltosRomconfig
1207 * altosui: Finish device programming code
1208 * altos: Place rom config variables in fixed location
1209 * altosui: make default Manifest look for built-in freetts
1210 * altosui: Separate out log file choosing dialog to share with CSV
1212 * altosui: refactor logfile chooser dialog to share more code
1213 * altosui: Add ability to create CSV file from telem or eeprom files
1214 * altosui: disable radio monitoring while using serial line for
1216 * altosui: Delay mapping Flash UI until flashing actually starts
1217 * altosui: fetch existing romconfig for flashing
1218 * altosui: always display romconfig ui while flashing
1219 * altosui: write USB serial number string while flashing
1220 * altosui: flush replies from serial link when entering debug mode
1221 * altos: always rebuild ao_product.c to track git version
1222 * altos: print GPS state flags in GPS 'g' command
1223 * altos: mark gps date written only after it gets into eeprom
1224 * altosui: Move number parsing code to Altos general class
1225 * altosui: Add AltosGreatCircle constructors
1226 * altosui: add rssi and distance/dir from pad to CSV files
1227 * altosui: AltosEepromReader was mis-setting boost tick
1228 * altosui: Add support for old (version < 3) telemetry files
1229 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1230 * altosui: When parsing saved telem files, errors shouldn't abort file
1231 * altosui: Remove debug printf from AltosState.java
1232 * altosui: command line args are converted to csv format
1233 * altos: prepare for sdcc 2.9.1
1236 * add a dummy install target
1237 * lose the prebuild hook for now while I'm fumbling
1238 * add install target for libaltos
1239 * add an install target for altosui
1242 * altosui: add elevation and range information
1245 * fix up the wrapper's path to the jar file
1246 * update Debian standards version
1247 * fix permissions on installed jar file, switch from ao-view to
1249 * install altosui man page
1250 * fix man page delivery path
1251 * Revert "lose the prebuild hook for now while I'm fumbling"
1253 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1255 altos (0.6+303+gb6da90b) unstable; urgency=low
1257 * add freetts as a build dep
1258 * move to science menu
1259 * working on java packaging details
1261 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1263 altos (0.6+292+g8fc261c) unstable; urgency=low
1265 * see if my new freetts package works
1267 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1269 altos (0.6+290+g7877496) unstable; urgency=low
1272 * altosui: check for closed serial device before reading
1273 * altosui: Remove unnecessary freetts .jar files
1274 * altosui: Close serial, join reader thread, free altos_file
1275 * altosui: remove debug printf
1276 * libaltos: build with java src encoding UTF8
1277 * altosui: construct Darwin application directory
1278 * Add Mac OS X packaging bits
1279 * altosui: Switch eeprom extension back to .eeprom
1280 * Moved Mac OS packaging to altosui dir
1281 * altosui: remove option to install to alternate volume
1282 * Make altosui test script executable
1284 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1286 altos (0.6+277+gd184819) unstable; urgency=low
1289 * fix text since TM only has one led to blink
1290 * add swig as a build dep
1291 * add a jdk to the build deps
1294 * When the EP0 IN buffer is full, don't panic, just skip sending
1296 * Add libaltos which talks to USB connected altos devices
1297 * Switch AltosUI to libaltos for device access
1298 * Present list of altos devices in nice format
1300 * Re-enable Linux support for altosui.
1301 * Darwin doesn't have strndup.
1302 * libaltos needs -I. on all systems
1303 * libaltos: make clean remove all built files
1304 * libaltos: build fat 10.5-compatible library
1305 * Add Mac OS X packaging files for altosui
1306 * Add application icons for Mac OS X
1307 * Clean up altosui build a bit
1308 * Remove directories as .class file dependencies; it makes them get
1309 rebuilt all the time
1310 * Java clean ups -- use varargs where possible, remove
1312 * Java voice reporting cleanups.
1313 * Force java source encoding to UTF-8
1314 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1316 * altosui: Catch errors opening USB devices. Limit list to relevant
1318 * Make voice and channel menus work.
1319 * Add voice test command for help in adjusting volume.
1320 * Remove debug printf
1321 * altosui: Add eeprom data capture function. No UI yet.
1322 * altosui: Add progress bar for eeprom downloading status
1323 * altosui: Fix Save flight data monitor layout, add cancel
1324 * altosui: Replace device dialog. Center eeprom monitor.
1325 * altosui: report rocket ground bearing at landing only if known
1326 * Reset GPS ready status when GPS comes unlocked on the pad
1328 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1330 altos (0.6+236+gcd8aa79) unstable; urgency=low
1333 * Telemetry code was mis-computing RSSI
1334 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1338 * significant documentation update
1339 * add build dep for sndfile
1340 * reflect documentation file name change
1341 * update to latest Debian standards version
1343 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1345 altos (0.6+224+g4766b13) unstable; urgency=low
1348 * documentation updates from Bob
1351 * Extension to KML output format, and minor bug fix
1354 * ao-view: disable radio telemetry monitoring during channel change
1355 * Add special code for USB panic's.
1356 * ao-postflight: was walking off state.data array
1357 * Abort any in-progress radio operation when changing radio channel
1359 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1361 altos (0.6+214+g16c4cae) unstable; urgency=low
1364 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1365 * merge a derivative of Bob Finch's mere mortals guide as getting started
1366 * merge the altusmetrum-themes package
1369 * Fix telemetrum.inf, tested by Adrian and Keithp
1370 * Finish basic flight monitoring UI with voice using FreeTTS
1372 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1374 altos (0.6+204+g6bd8513) unstable; urgency=low
1376 * lose the quotes since they apparently aren't necessary
1378 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1380 altos (0.6+202+gae6854d) unstable; urgency=low
1382 * update desktop file for conformance with current standards
1384 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1386 altos (0.6+200+g68eaaa6) unstable; urgency=low
1388 * add initial package build scripts for Arch Linux from Bob Finch
1389 * add desktop file provided by Bob Finch
1391 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1393 altos (0.6+195+gcde60f1) unstable; urgency=low
1395 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1397 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1399 altos (0.6+193+g314d27a) unstable; urgency=low
1402 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1404 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1406 altos (0.6+190+g8b6767e) unstable; urgency=low
1409 * Fix all stdio reading functions to be __critical
1410 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1412 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1414 altos (0.6+187+g8702f49) unstable; urgency=low
1417 * more text created during SFO->DEN flight
1418 * initial attempt at a telemetrum turn on script .. needs work
1421 * Revert "Add optional 's' command to packet slave to enable/disable
1423 * Disable interrupts while reading from stdin
1425 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1427 altos (0.6+180+g99094f0) unstable; urgency=low
1430 * Increase reset switch time to 100ms
1431 * Add optional 's' command to packet slave to enable/disable slave
1433 * More ALtosUI changes
1434 * Autodetect flite voice registration function
1437 * capture work done on SFO->DEN flight
1438 * add some RF usage information from an email reply sent today, and
1441 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1443 altos (0.6+171+g9394393) unstable; urgency=low
1449 * Only have the slave return a packet if it received one.
1451 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1453 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1456 * INSTALL file changed by auto tools
1459 * libflite may forget to reference libasound
1461 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1463 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1466 * Start adding java-based UI
1467 * Add telemetry data parsing code
1468 * Add Windows install .inf file
1469 * Fix windows install file
1470 * Add telem parsing code
1471 * Steal C code from ao-view
1472 * Display table of flight info. gps is not working yet though
1473 * Fix up table formatting
1476 * Clean up GPS data formatting
1477 * Report current gps nsat, not last locked nsat
1478 * Remove GPS data missing from skytraq. Save max height/accel/speed
1479 * Remove unused cell renderer class
1481 * Use RXTX for serial comm. Add logdir preference saving
1482 * Make ao_radio_idle keep trying to get the radio to idle.
1483 * Don't abort the radio when enabling telemetry monitoring
1484 * Clean up some altosui comments
1485 * Switch TeleMetrum from v0.2 to v1.0
1486 * Add Linux device discovery
1487 * Interrupt running replay thread when starting another replay
1488 * serial port read function cannot be interrupted. poll every 1 second
1489 * TD reports "not-connected" when GPS has 0 sats
1490 * Tasks may move in task structure as a result of ao_exit
1491 * Enable telemetry monitoring
1492 * Use 16-bit flite voice (which appears to have changed symbols
1494 * When changing RESET line, delay 20ms
1497 * choose a better set of docbook xsl files
1499 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1501 altos (0.6+131+g6629ec5) unstable; urgency=low
1503 * lose the url entirely for now
1505 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1507 altos (0.6+129+g934434f) unstable; urgency=low
1511 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1513 altos (0.6+127+g05ad583) unstable; urgency=low
1515 * need another build dep
1517 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1519 altos (0.6+125+g8f1d47e) unstable; urgency=low
1521 * make lintian happy
1522 * tweak copyright assertion
1523 * crudely incorporate "day in the life" info from web page
1524 * rewrite urls in docbook format
1526 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1528 altos (0.6+119+g00f49c8) unstable; urgency=low
1531 * update changelogs for Debian build
1532 * move gbp.conf into debian/
1533 * initial harness for documentation
1537 * Round radio calibration value instead of truncating
1538 * Document the ao-dumplog '--remote' flag for radio-link downloads
1540 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1542 altos (0.6+108+g6e61170) unstable; urgency=low
1545 * Need to duplicate new altitude conversion code in aoview.
1547 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1549 altos (0.6+106+ga1478f6) unstable; urgency=low
1552 * Add ao_radio_xmit to help test boards without flashing them.
1553 * Allow product names to have suffixes (like board revisions)
1554 * Fix and document the ao-rawload --run flag
1556 * Leave .ihx files in the build directory too - easier to debug that way
1557 * Eliminate deadlock when writing config from radio link
1558 * Fix up LED colors for each product.
1559 * Add .gitignore for ao-bringup
1562 * create a turn on script for lighting up TeleDongle v0.2 boards
1564 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1566 altos (0.6+95+g2f45953) unstable; urgency=low
1568 * update changelogs for Debian build
1569 * conditionalize use of git on executability of /usr/bin/git binary
1571 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1573 altos (0.6+88+gdeccc10) unstable; urgency=low
1575 * add gawk as a build dependency since strtonum is a gawk extension
1577 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1579 altos (0.6+86+g2491282) unstable; urgency=low
1582 * Disable monitor mode before attempting radio test.
1583 * Ensure that ao_alarm waits at least the specified time
1584 * Remove dbg driver code from telemetrum/teledongle
1585 * Add AT45DBxx1D driver
1586 * Remove green LED and temp sensor from v0.2 code
1587 * Add at45db161d.h header file for new flash part.
1588 * Add 'f' command to display flash status register contents
1589 * Dump more flash parameters for the flash_status command
1590 * Dump config block from read/write config and flash_status commands
1591 * Don't set ao_flash_setup_done until we're actually done.
1592 * Remove flash debugging printfs
1593 * Add simple gps dump command 'g'
1594 * Force idle mode by shorting the SPI clock to ground at boot time.
1595 * Switch to using internal cc1111 temperature sensor
1596 * Missing ao_mutex_put in gps_dump
1597 * Compute daytime using GPS as time base
1598 * Pull in a bit more data for filtering the start of the boost
1599 * Log GPS data on pad after boost detect.
1600 * Change barometer conversion code to shrink conversion table
1601 * Change altos build process to support per-product compile-time
1603 * Update .gitignore files
1604 * Quiet make output.
1605 * Add back stack size checking to altos linking phase
1606 * Must install .map files for ao-load to work
1608 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1610 altos (0.6+60+g10d1bbc) unstable; urgency=low
1613 * Use ao_radio_get/ao_radio_put in packet code.
1615 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1617 altos (0.6+58+gbbb152c) unstable; urgency=low
1620 * Re-order config values. Change frequency to cal
1621 * Allow radio calibration to be set from ao-load
1622 * Add --cal to man page
1624 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1626 altos (0.6+53+gcd49847) unstable; urgency=low
1629 * Remove send_serial and serial_baud commands.
1630 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1631 * Add radio calibration configuration.
1633 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1635 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1638 * Change default callsign to "N0CALL"
1640 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1642 altos (0.6+47+g4053309) unstable; urgency=low
1644 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1645 * change home URL in control file to be the AltOS page
1647 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1649 altos (0.6+43+gd6ba07e) unstable; urgency=low
1652 * Decode HDOP data from skytraq GPS
1653 * Document ao-postflight --gps and --kml options.
1654 * Make ao-postflight create filenames using input filenames.
1655 * Make TD print 0000-00-00 for invalid dates.
1656 * Fix --plot arg handling. Add -all option.
1657 * Convert telemetry file GPS satellite information in cc_log_read
1658 * Don't crash if --plot isn't passed on ao-postflight command line
1659 * ao-postflight: compute barometric alt for each GPS position
1660 * ao-postflight: don't try to use missing gps sat data
1661 * Automatically extract flight number for eeprom and telem filenames.
1663 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1665 altos (0.6+32+g87e6f3e) unstable; urgency=low
1668 * fix typo in comment
1671 * Reduce igniter firing time from 500ms to 50ms.
1672 * Add GPS date/time output to ao-postflight.
1673 * Eliminate SiRF state values from ao-view.
1675 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1677 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1680 * Add two-point accelerometer calibration.
1681 * Remove "l" command as ao-dumplong no longer uses it
1682 * Remove "d" command
1683 * Remove "f" command
1684 * Reformat ADC values to show all 16 bits
1685 * ao_flight_test was using accel value for pressure too
1686 * Pass accel calibration over telemetry stream. Telemetry data format
1688 * Add ability to dump eeprom data over radio link.
1689 * In packet master, move USB flush from packet thread to echo thread
1690 * In USB pollchar, wait for packet before re-checking USB out len
1691 * Explicitly use USB I/O routines in packet code
1692 * Flush pending input when switching to remote packet mode
1693 * Stop recording in ao-dumplog after receiving an invalid block
1694 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1695 * Add Watchdog Timer Control register definitions
1696 * Add reboot command.
1697 * Return radio to telemetry settings when packet system closed.
1698 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1699 * Loosen tolerances for main->landed transition
1700 * Provide a dummy 'uninstall' target in the src directory.
1701 * Share telemetry parsing code in cc library.
1702 * Enable telemetry receive in ao_view
1703 * Switch order of serial/flight in ao-postflight summary
1704 * Add flight number to telemetry stream.
1705 * Add date to GPS data, captured from GPRMC packet.
1706 * Stop using SiRF state info.
1708 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1710 altos (0.6) unstable; urgency=low
1713 * Add support for the SkyTraq GPS unit
1714 * Build two versions of TM, one for SiRF, one for SkyTraq
1715 * Save some DSEG space by marking cmd functions __reentrant
1716 * Add ao_wake_task and ao_exit
1717 * Add keyhole-markup generation for ao-postflight.
1718 * Initial packet bits. Just testing transmission
1719 * Add radio carrier command
1720 * Wait for TX to finish sending data
1722 * Remove reason from ao_dma_abort
1723 * Switch packet code from timer thread to ao_alarm
1724 * Use ao_radio_done to wait for TX to completely finish with packet
1725 * Send SYN packet to set sequence numbers
1727 * Do more flushing in packet test code
1728 * Use ao_alarm for ao_delay so it can be easily interrupted
1729 * Poke master to speed up packet rate when things are busy
1730 * No need to wakeup &ao_tick_count now
1731 * Enable packet-based communcation to command processor
1732 * Add more docs to the README file
1733 * Disable interrupts while removing tasks from task list
1734 * Add ao_usb_pollchar to ao.h
1736 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1738 altos (0.5+90+g127c312) unstable; urgency=low
1740 * de-version the libreadline-dev build dependency
1742 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1744 altos (0.5+86+g2de548f) unstable; urgency=low
1746 * automate push of updated and tagged master branch during
1747 debian/rules prebuild
1748 * flush repetitive junk out of debian/changelog, and update the
1750 * add support for tagging git repository on each Debian package build
1752 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1754 altos (0.5+77+gc57bd7f) unstable; urgency=low
1756 * build for Debian from git
1758 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600