1 commit da42f406e88ccc821cd45d5a94d5afec65ec50e9
3 Author: Bdale Garbee <bdale@gag.com>
4 Date: Mon Jan 17 09:50:17 2011 -0700
6 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
8 commit ea4cdfb87e03ecfb974f98305671265b6fb95372
9 Author: Bdale Garbee <bdale@gag.com>
10 Date: Mon Jan 17 09:49:45 2011 -0700
12 update documentation to reflect reality that modifying a board or separate
13 pyro battery is not as simple as one trace cut on v1.0 and v1.1 boards
15 commit cf550f9b96fa94d8db559e01df0e265bb1c7b572
16 Author: Keith Packard <keithp@keithp.com>
17 Date: Sun Jan 16 23:23:45 2011 -0800
19 doc: Remove mention of ao_wake_task
21 This has been removed from the altos sources, so remove it from the
24 Signed-off-by: Keith Packard <keithp@keithp.com>
26 commit 4b71c4f4ed6cae23a7f4a2e7ae697da9ec614898
27 Author: Keith Packard <keithp@keithp.com>
28 Date: Sat Jan 15 12:26:53 2011 -0800
30 altos: Use 5V reference data to correct accelerometer measurements.
32 When the 3.3V and 5V values shift relative to each other (usually due
33 to changes in power consumption), the measured acceleration will
34 appear to shift. This patch converts the 3.3V referenced acceleration
35 value into a 5V referenced acceleration, eliminating this error.
37 Signed-off-by: Keith Packard <keithp@keithp.com>
39 commit 2887fe7affc0706dbeb2f04df9a00a9b799903ed
40 Author: Keith Packard <keithp@keithp.com>
41 Date: Sat Jan 15 12:25:57 2011 -0800
43 altos: Optimize fetching of ADC data in flight code
45 This stores the address of the desired sample in a local variable and
46 then fetches through that. Saves quite a few instructions.
48 Signed-off-by: Keith Packard <keithp@keithp.com>
50 commit 2681a17500913cbaf3966f09380bb1d6b59e3863
51 Author: Keith Packard <keithp@keithp.com>
52 Date: Sat Jan 15 12:18:32 2011 -0800
54 altos: Sample the accelerometer reference voltage on v1.1 boards
56 This places the 5v reference samples in an array parallel to the basic
57 ADC values. It doesn't do anything with the values, just stores them.
59 Signed-off-by: Keith Packard <keithp@keithp.com>
61 commit 69290588980bb15732a99eca5c911a3b6e9a37b9
62 Author: Keith Packard <keithp@keithp.com>
63 Date: Sat Jan 15 12:12:02 2011 -0800
65 altos: Ensure flight code gets first crack at new ADC data
67 Instead of having everyone wait on the raw ADC ring, have the flight
68 code wait on that and have everyone else wait for the flight code to
69 finish looking at the data and move its pointer forwards.
71 Signed-off-by: Keith Packard <keithp@keithp.com>
73 commit 1b8d7313504240ed04e0747e9b0f6e9a83d323e2
74 Author: Keith Packard <keithp@keithp.com>
75 Date: Sun Jan 16 15:57:15 2011 -0800
77 altos: Auto-calibrate linux-based flight testing code
79 Use the provided ground acceleration average to set the two
80 accelerometer calibration values so that the flight code will
81 detect pad/idle mode correctly.
83 Signed-off-by: Keith Packard <keithp@keithp.com>
85 commit afd3d3cdb8c2291c1c7cda7908392d68cd04f87f
86 Author: Mike Beattie <mike@ethernal.org>
87 Date: Mon Jan 17 15:03:40 2011 +1300
89 Rework invalid accel cal detection code
91 Slightly reduces code space.
93 Uncalibrated accelerometer now enters invalid state as well.
95 Signed-off-by: Mike Beattie <mike@ethernal.org>
97 commit 3566dee1cf83870396a0bb164f5549dd3faf58f5
98 Author: Keith Packard <keithp@keithp.com>
99 Date: Sun Jan 16 14:40:31 2011 -0800
101 altosui: Remove spurious colons from eeprom selection headers
103 This colons make the presentation a bit confusing.
105 Signed-off-by: Keith Packard <keithp@keithp.com>
107 commit ab31b1c737d8fd32af482e5b06699f1b832a25a1
108 Author: Keith Packard <keithp@keithp.com>
109 Date: Sat Jan 15 00:56:22 2011 -0800
111 altos: Add DATA_TO_XDATA to linux test harness
113 The flight test harness needs to expose every function used by the
114 flight code in some form, and this macro is about to become used.
116 Signed-off-by: Keith Packard <keithp@keithp.com>
118 commit add2802a8a33336180fe6856241a7f4a8200e89c
119 Author: Mike Beattie <mike@ethernal.org>
120 Date: Sun Jan 16 00:10:30 2011 +1300
122 altos: Added check for out of bounds accel
124 Chose invalid flight mode instead of idle to give user feedback.
126 Signed-off-by: Mike Beattie <mike@ethernal.org>
128 commit 58838c0b96a91da0bd0cd77c3ff312b589c08136
129 Author: Mike Beattie <mike@ethernal.org>
130 Date: Sat Jan 15 23:21:26 2011 +1300
132 altos: Added check for an accel value above 1.5g
134 When detecting flight or idle mode, this should indicate
135 that accel cal values are out of whack.
137 Signed-off-by: Mike Beattie <mike@ethernal.org>
139 commit 118fe84c9ff1cc9d1653e67a2315e22e19d60a14
140 Author: Keith Packard <keithp@keithp.com>
141 Date: Sat Jan 15 11:26:31 2011 -0800
143 altos: average 512 accel/baro samples at startup instead of 1000
145 This lets us use a simple shift instead of a divide, saving a huge
146 amount of code space.
148 Signed-off-by: Keith Packard <keithp@keithp.com>
150 commit 8a775b8f9ecefa143050653d74dfd218b32b9bb5
151 Author: Anthony Towns <aj@erisian.com.au>
152 Date: Sun Jan 16 10:54:45 2011 +1000
154 altos: Restructure skytraq NMEA parsing code to save some space
156 Splitting this into several smaller functions appears to make SDCC
157 generate better code.
159 commit 7a35b2d7048669a96256d4ea0086299f8a0cb1df
160 Author: Keith Packard <keithp@keithp.com>
161 Date: Sat Jan 15 22:42:38 2011 -0800
163 altos: Flush log when full
165 When the log storage is full, make sure any pending writes are flushed
166 out so that the last bit isn't lost.
168 Signed-off-by: Keith Packard <keithp@keithp.com>
170 commit 47ee4597e55749e8f66f61a585ea32776979bf80
171 Author: Keith Packard <keithp@keithp.com>
172 Date: Sat Jan 15 16:25:10 2011 -0800
174 altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
176 What a terrible mistake! The flight computer serial numbers were
177 recorded in only 8 bits, so serial numbers > 255 would get truncated.
179 There's really no fix other than bumping the field to 16 bits and
180 reflashing every TM and TD on the planet. Very unfortunate.
182 Signed-off-by: Keith Packard <keithp@keithp.com>
184 commit b22ba359a02297e39a446cbd5ef51e63b795624a
185 Author: Keith Packard <keithp@keithp.com>
186 Date: Sat Jan 15 12:05:50 2011 -0800
188 doc: inkscape tracks the filename inside the document
190 telemetrum-outline.svg was renamed from telemetrum.svg and inkscape
193 Signed-off-by: Keith Packard <keithp@keithp.com>
195 commit d0a841b285fb398f0be72183ec3c9d1e358419a9
196 Author: Keith Packard <keithp@keithp.com>
197 Date: Sat Jan 15 12:02:43 2011 -0800
199 altosui: Require 4 sats to light up the 'GPS locked' light.
201 This tracks the same GPS signal requirement needed for 'GPS ready' and
202 ensures that we have a 3d fix.
204 Signed-off-by: Keith Packard <keithp@keithp.com>
206 commit 1bfdce6fc3367fdf03e0dc7ddd94da18723b8ba3
207 Author: Keith Packard <keithp@keithp.com>
208 Date: Sun Jan 16 14:30:38 2011 -0800
210 altosui: Ensure serial device is closed after eeprom download finishes
212 As this code is all event-driven, track which events will trigger
213 further work and block closing the device in those specific cases,
214 ensuring that all other code paths end up closing the device.
216 Signed-off-by: Keith Packard <keithp@keithp.com>
218 commit 987039b8f0b1d889aca9109d4c6a83f034ff64a7
219 Author: Keith Packard <keithp@keithp.com>
220 Date: Sun Jan 16 14:29:57 2011 -0800
222 altosui: Remove debug message when eeprom downloads are complete.
224 This message isn't useful now that this code appears to work.
226 Signed-off-by: Keith Packard <keithp@keithp.com>
228 commit fb534aae15f0f1e5d69790e159d0287b6b8a514a
229 Author: Keith Packard <keithp@keithp.com>
230 Date: Sun Jan 16 14:28:35 2011 -0800
232 altosui: Use long input flush timeout when remote.
234 100ms isn't long enough to capture pending remote serial input, so use
237 Signed-off-by: Keith Packard <keithp@keithp.com>
239 commit d4add23186b3586c99579d83efdc003f79e9bf7a
240 Author: Keith Packard <keithp@keithp.com>
241 Date: Sun Jan 16 14:26:18 2011 -0800
243 altosui: Make serial debug more complete and accurate
245 Display all serial input, including telemetry.
246 Wait to display serial output until flush time, to debug missing flushing.
247 Show when devices are opened and closed.
249 Signed-off-by: Keith Packard <keithp@keithp.com>
251 commit deb3c7b9206be0c9c46f75d35c8f766c26d9838f
252 Author: Keith Packard <keithp@keithp.com>
253 Date: Sat Jan 15 22:43:37 2011 -0800
255 altosui: Reset eeprom download instance variables before reading flight
257 To deal with downloading multiple flights in a single invocation, make
258 sure all relevant instance variables are set back to start of flight
259 download values each time a log is read.
261 Signed-off-by: Keith Packard <keithp@keithp.com>
263 commit eec9eb2e81535e62c52fbb2e57a2d33f88f92c1a
264 Author: Mike Beattie <mike@ethernal.org>
265 Date: Mon Jan 17 07:56:53 2011 +1300
267 Close serial port if Download/Delete dialog is cancelled.
269 Signed-off-by: Mike Beattie <mike@ethernal.org>
271 commit df1c6ab3ac079199b5a12328c9ff5cfa6ac29b36
272 Author: Mike Beattie <mike@ethernal.org>
273 Date: Mon Jan 17 00:40:07 2011 +1300
275 Convert EepromSelect dialog to use a GridBag
277 Signed-off-by: Mike Beattie <mike@ethernal.org>
279 commit fef302656f21ae0ab4772f72979cbb7f071da89a
280 Author: Mike Beattie <mike@ethernal.org>
281 Date: Sun Jan 16 20:25:19 2011 +1300
283 Re-order and re-arrange eeprom download dialog
285 Signed-off-by: Mike Beattie <mike@ethernal.org>
287 commit 35adb7c98fe02e84fff70c1bee22bfa019cfacc2
288 Author: Keith Packard <keithp@keithp.com>
289 Date: Fri Jan 14 21:44:59 2011 -0800
291 doc: Add telemetrum mounting template in svg and pdf forms
293 telemetrum-outline.svg and telemetrum-outline.pdf
295 Signed-off-by: Keith Packard <keithp@keithp.com>
297 commit fdba0f24afd59becc499d750bbdb80aea86066ac
298 Author: Bdale Garbee <bdale@gag.com>
299 Date: Fri Jan 14 18:01:16 2011 -0700
301 update changelogs for Debian build
303 commit 646e1926cdf56e2cf2425413ce716e6999b64a58
304 Author: Bdale Garbee <bdale@gag.com>
305 Date: Fri Jan 14 18:01:00 2011 -0700
307 update changelogs for Debian build
309 commit d908c2ebd0b11a54cfd922a192249d0f0df0ddb0
310 Author: Keith Packard <keithp@keithp.com>
311 Date: Fri Jan 14 16:47:36 2011 -0800
313 altosui: Add preference for serial debugging.
315 This dumps serial input/output to stdout.
317 Signed-off-by: Keith Packard <keithp@keithp.com>
319 commit fcaee12a64d5e195b55b8f77c19dfc0c57ef5d58
320 Author: Keith Packard <keithp@keithp.com>
321 Date: Fri Jan 14 16:47:19 2011 -0800
323 altosui: Ensure serial line is flushed after disabling remote link
325 Flush the '~' character.
327 Signed-off-by: Keith Packard <keithp@keithp.com>
329 commit 2d154be89246e111a36f7c2700effbb2c97da541
330 Author: Keith Packard <keithp@keithp.com>
331 Date: Fri Jan 14 16:44:50 2011 -0800
333 altosui: Show dialog after successful delete or when no flights
335 Make sure the user always sees confirmation for flight log management.
337 Signed-off-by: Keith Packard <keithp@keithp.com>
339 commit b490455807d1c70c81785ed8931a07ab44e8e421
340 Author: Bdale Garbee <bdale@gag.com>
341 Date: Fri Jan 14 14:31:19 2011 -0700
343 update changelogs for Debian build
345 commit 97b1ca994599ad262400eb3c685799582f7f1b94
346 Author: Bdale Garbee <bdale@gag.com>
347 Date: Fri Jan 14 14:30:49 2011 -0700
349 update changelogs for Debian build
351 commit d794ef9e0fbe4d13259db1bbd69f01717c14400b
352 Author: Keith Packard <keithp@keithp.com>
353 Date: Wed Jan 12 12:41:26 2011 -0800
355 altos: check for valid flight number in ao_log_delete
357 Zero is not a valid flight number, and ao_log_flight uses that to
358 indicate 'no flight in this slot'. Check the user-provided input for
359 zero before looking through the slots.
361 Signed-off-by: Keith Packard <keithp@keithp.com>
363 commit 8801b8c1947bd39f7c985b91a2ba8dbc81bcc91a
364 Author: Keith Packard <keithp@keithp.com>
365 Date: Wed Jan 12 12:40:45 2011 -0800
367 altosui: Add eeprom 'manage' ui to download and delete multiple flights
369 This shows the list of available flights and provides options to
370 download and/or delete each one.
372 Signed-off-by: Keith Packard <keithp@keithp.com>
374 commit 440d52e34364fdeeddc76a2d744cc6d1c934364f
375 Author: Keith Packard <keithp@keithp.com>
376 Date: Tue Jan 11 21:28:07 2011 -0800
378 altosui: Add support for parsing list of flights from the 'l' command
380 This adds parsing support to enumerate the available flights, but does
381 not yet provide any UI to use it.
383 Signed-off-by: Keith Packard <keithp@keithp.com>
385 commit 7ad419d81c90ef6a16656970466313767fef830f
386 Author: Keith Packard <keithp@keithp.com>
387 Date: Tue Jan 11 21:26:41 2011 -0800
389 altos: oops -- 'e' command was only showing 7 of the 8 bytes per line
391 Just a silly off-by-one error when printing out the data received from flash.
393 Signed-off-by: Keith Packard <keithp@keithp.com>
395 commit bd2480fd757b67557d9c7de42e402034002c3e37
396 Author: Keith Packard <keithp@keithp.com>
397 Date: Tue Jan 11 15:39:24 2011 -0800
399 altosui: Split eeprom download code apart
401 Create separate 'download config data', 'read single record' and 'read
402 block' functions. This code will be shared with future multi-log
403 reading code for new firmware.
405 Signed-off-by: Keith Packard <keithp@keithp.com>
407 commit c437b14b7fc7afdfc7b809a04d7fa29d5e742307
408 Author: Anthony Towns <aj@erisian.com.au>
409 Date: Fri Jan 7 21:00:10 2011 -0800
411 altos: Remove redundant initialization of ao_interval variables
413 These are all initialized in the ao_flight_drogue state transition.
415 Signed-off-by: Keith Packard <keithp@keithp.com>
417 commit 57de960b8148bf485607898c3d66af6994d76481
418 Author: Anthony Towns <aj@erisian.com.au>
419 Date: Fri Jan 7 20:52:33 2011 -0800
421 altos: Remove unused accel_vel_mach and accel_vel_boost variables
423 Presumably left-over debugging code.
425 Signed-off-by: Keith Packard <keithp@keithp.com>
427 commit ca66f86a899c191b6362a334417fc84a79349677
428 Author: Keith Packard <keithp@keithp.com>
429 Date: Fri Jan 7 20:46:29 2011 -0800
431 altosui: Add configuration of flight log size
433 This adds to the TeleMetrum configuration UI the ability to set the
434 maximum flight log size.
436 Signed-off-by: Keith Packard <keithp@keithp.com>
438 commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a
439 Author: Keith Packard <keithp@keithp.com>
440 Date: Fri Jan 7 20:26:39 2011 -0800
442 altos: Check for full log and complain
444 Reports special tone along with the continuity checks.
445 Reports flight 0 in telemetry.
447 Signed-off-by: Keith Packard <keithp@keithp.com>
449 commit 00891b40754962ef6530b237ef52017bb58112d5
450 Author: Keith Packard <keithp@keithp.com>
451 Date: Fri Jan 7 20:25:09 2011 -0800
453 altos: Check requested log max size against available space
455 Make sure the amount of memory requested for a single log isn't more
456 than is available on the device.
458 Signed-off-by: Keith Packard <keithp@keithp.com>
460 commit bbddcae2a15b6d430e84956ddf26955aa9173cc0
461 Author: Anthony Towns <aj@erisian.com.au>
462 Date: Fri Jan 7 20:18:25 2011 -0800
464 altos: Optimize Morse code generation
466 This reduces the size of data and code needed to report the
469 Signed-off-by: Keith Packard <keithp@keithp.com>
471 commit 73620c41017c1774d6190dfd4be5b742eb64f8d3
472 Author: Keith Packard <keithp@keithp.com>
473 Date: Fri Jan 7 20:13:28 2011 -0800
475 altos: ensure erase mark is written when erasing flights
477 It was getting called only when *failing* to erase a flight (oops),
478 secondly, it wasn't getting written because ao_storage_flush wasn't
481 Signed-off-by: Keith Packard <keithp@keithp.com>
483 commit edd22ee49adf60c35f2fe6ba97c111b7ad4131c2
484 Author: Keith Packard <keithp@keithp.com>
485 Date: Fri Jan 7 17:56:06 2011 -0800
487 altos: report flight log offsets in hex block numbers instead of bytes
489 makes them compatible with the 'e' command.
491 Signed-off-by: Keith Packard <keithp@keithp.com>
493 commit 1cc08af4f4a1ff61fc0deca3bdd95e8a5ca8ec5c
494 Author: Keith Packard <keithp@keithp.com>
495 Date: Fri Jan 7 17:55:54 2011 -0800
497 altos: white space fix
499 Signed-off-by: Keith Packard <keithp@keithp.com>
501 commit d8c9684239b67a69a4a3d24202a6df0d73c4f7f5
502 Author: Keith Packard <keithp@keithp.com>
503 Date: Fri Jan 7 17:54:54 2011 -0800
505 altos: Speed up at45 and 25lc erase speeds
507 No need to read the block to be erased before erasing it.
509 Signed-off-by: Keith Packard <keithp@keithp.com>
511 commit 2722703bd848b07a02d3ce0c83a502eca52a9f1d
512 Author: Keith Packard <keithp@keithp.com>
513 Date: Fri Jan 7 14:58:39 2011 -0800
515 altos: support storage of multiple flights.
517 This adds the logging support for dealing with multiple flights
519 Signed-off-by: Keith Packard <keithp@keithp.com>
521 commit a9b210bc33cd95e7108ab51925fdf0d5e8deaf7e
522 Author: Keith Packard <keithp@keithp.com>
523 Date: Fri Jan 7 10:05:11 2011 -0800
525 altos: Add configuration parameter for maximum flight log size
527 This parameter will permit available storage to be split into multiple
528 separate flight logs.
530 Signed-off-by: Keith Packard <keithp@keithp.com>
532 commit 3bcf14f12f6681888c3162d0f33ef2d454eb75dd
533 Author: Bdale Garbee <bdale@gag.com>
534 Date: Fri Jan 7 00:52:50 2011 -0700
536 update changelogs for Debian build
538 commit 408a3e04362d626778640dd0ce7d356d3863de53
539 Author: Keith Packard <keithp@keithp.com>
540 Date: Thu Jan 6 23:38:13 2011 -0800
542 altos: Mark end of available flight list with 'done' to make the UI
545 Signed-off-by: Keith Packard <keithp@keithp.com>
547 commit e991f52276248fa08d96fbecc458bc478e98d299
548 Author: Keith Packard <keithp@keithp.com>
549 Date: Thu Jan 6 23:35:31 2011 -0800
551 altos: Rip out 'optimization' in ao_log_scan
553 Remove premature optimization to avoid re-scanning the flight logs for
554 the best empty entry.
556 Signed-off-by: Keith Packard <keithp@keithp.com>
558 commit 569a1dac55b70c30f01afa7bcb74442ecdd85d85
559 Author: Keith Packard <keithp@keithp.com>
560 Date: Thu Jan 6 22:37:38 2011 -0800
562 altos: Move common storage code to ao_storage.c. Add M25P80 driver
564 This reworks the storage API so that you erase blocks and then store
565 data to them so that the M25P80 driver will work.
567 Signed-off-by: Keith Packard <keithp@keithp.com>
569 commit e4ba9bf4291bf17c777c8c3ef7c71e4a30b9947a
570 Author: Keith Packard <keithp@keithp.com>
571 Date: Thu Jan 6 17:34:58 2011 -0800
573 altos: Require manual flight erasing.
575 This supports flash chips that require larger erase blocks.
577 Signed-off-by: Keith Packard <keithp@keithp.com>
579 commit ddcc94da4326f9ce954bd31a46b36165c58e6c18
580 Author: Keith Packard <keithp@keithp.com>
581 Date: Thu Jan 6 12:51:39 2011 -0800
583 altos: Simplify storage API
585 This removes the config-specific APIs and exposes global variables for
586 the available storage space, block size and config storage location.
588 Signed-off-by: Keith Packard <keithp@keithp.com>
590 commit f3f1b1488bdc92fa9277dc549ba9f3210a8d4c8c
591 Author: Keith Packard <keithp@keithp.com>
592 Date: Thu Jan 6 11:28:35 2011 -0800
594 altos: packet and usb i/o routines use 'char', not 'uint8_t'
596 Just fixing the type of a local variable holding a character
597 passed from the packet link to usb.
599 Signed-off-by: Keith Packard <keithp@keithp.com>
601 commit 5688af4e4d7ca8e559d758257e79b7979f1cc924
602 Author: Keith Packard <keithp@keithp.com>
603 Date: Wed Dec 22 21:13:56 2010 -0800
605 altos: Add telemetrum-v1.1 directory
607 This just clones the v1.0 build; changes will be added on top of this.
609 Signed-off-by: Keith Packard <keithp@keithp.com>
611 commit 9f7296b3feab872bf51fc369ade69cc1e7cf7a3f
612 Author: Keith Packard <keithp@keithp.com>
613 Date: Wed Dec 22 21:06:22 2010 -0800
615 altos: Split out SPI driver.
617 For TM with the companion connector, the SPI bus will be shared among
618 multiple devices. Split out the existing SPI code into a common
619 driver, with the SPI bus protected by a mutex.
621 Signed-off-by: Keith Packard <keithp@keithp.com>
623 commit 51c410c1c952e0e9bcf1b2c438813de63753be5f
624 Author: Keith Packard <keithp@keithp.com>
625 Date: Sun Nov 28 00:24:54 2010 -0800
627 windows: Update NSIS installer file to use compatibility IDs
629 This allows the file to contain a single InitDriverSetup function,
630 making things shorter and (I hope) clearer.
632 commit 4a42f9d5c20dcaf5fd7591ccf9e32c6130d9d538
633 Author: Keith Packard <keithp@keithp.com>
634 Date: Sun Nov 28 00:22:14 2010 -0800
636 windows: Add compatibility IDs to telemetrum.inf
638 This will allow the .nsi file to reference just the compatibility ID
639 instead of needing to have all of the USB IDs listed.
641 Signed-off-by: Keith Packard <keithp@keithp.com>
643 commit 484b44e81b655f1ecb48256095382a56d2839bae
644 Author: Keith Packard <keithp@keithp.com>
645 Date: Fri Nov 26 17:39:40 2010 -0800
647 altos: eliminate ao_wake_task
649 Waking up a task waiting on some random object is a bad idea. Fix
650 the waiters to look for suitable signalling.
652 Signed-off-by: Keith Packard <keithp@keithp.com>
654 commit 07213dc34fa20470a4b36a327a83d75b0f010ebb
655 Author: Keith Packard <keithp@keithp.com>
656 Date: Fri Nov 26 16:14:15 2010 -0800
658 altos: clean up radio abort paths. Share radio code.
660 Instead of aborting the DMA and radio operation and expecting that to
661 be handled reasonably by the radio receiving task, rewrite things so
662 that the abort function just wakes the receiving task while that
663 terminates the DMA and cleans up the radio.
665 This eliminates all kinds of nasty bugs dealing with radio abort
666 smashing the radio registers at the wrong time, or interrupting a
669 Signed-off-by: Keith Packard <keithp@keithp.com>
671 commit b62580855c5144f5bc7e0172289bce08814d9472
672 Author: Anthony Towns <aj@erisian.com.au>
673 Date: Tue Dec 14 03:40:18 2010 +1000
675 altosui: move maps to subdir, fix E/W mismatch
677 commit b8d2eb5509096fd5bd04598b1312077659109620
678 Author: Bdale Garbee <bdale@gag.com>
679 Date: Wed Dec 1 00:15:17 2010 -0700
681 update changelogs for Debian build
683 commit ea95c060f8bd959cefc60dd6d411151f3c91384e
684 Author: Bdale Garbee <bdale@gag.com>
685 Date: Wed Dec 1 00:12:05 2010 -0700
687 fix symlink paths in rules file
689 commit f95220b6f0cc74928e0e7d7c7e1f443eafc32a02
690 Author: Bdale Garbee <bdale@gag.com>
691 Date: Wed Dec 1 00:03:23 2010 -0700
693 update changelogs for Debian build
695 commit ea7130e953622884afc348265f5a4c58f9876823
696 Author: Bdale Garbee <bdale@gag.com>
697 Date: Wed Dec 1 00:00:58 2010 -0700
699 modify Debian package build to deliver one copy of background.png for
700 the themes and symlink it into place for gdm and slim
702 commit 3696b30a8d1eb351353d84b5f7af8eeff55c468b
703 Author: Bdale Garbee <bdale@gag.com>
704 Date: Mon Nov 29 21:47:13 2010 -0700
706 update changelogs for Debian build
708 commit 11b3f9ff715017a2dec02003275885334f22c009
709 Author: Bdale Garbee <bdale@gag.com>
710 Date: Mon Nov 29 21:46:02 2010 -0700
714 commit 5f3f11e11dff9b9f4d1dde279c0d474de0de12a5
715 Author: Keith Packard <keithp@keithp.com>
716 Date: Mon Nov 29 20:41:49 2010 -0800
718 Add minimal release testing plan to Releasing
720 Signed-off-by: Keith Packard <keithp@keithp.com>
722 commit f0a4deee23984a8f779917bbeaf74a66a0abf592
723 Author: Keith Packard <keithp@keithp.com>
724 Date: Mon Nov 29 20:34:27 2010 -0800
726 Move "Releasing" to top level
728 This file documents the AltOS release process for all systems.
730 Signed-off-by: Keith Packard <keithp@keithp.com>
732 commit b727156ef0a7fb6e442ca28be27eb344a213ecf8
733 Author: Keith Packard <keithp@keithp.com>
734 Date: Mon Nov 29 20:17:35 2010 -0800
736 windows: Add jfreechart.jar and jcommon.jar to windows install image
738 These are necessary for the Graph Data button to do anything useful.
740 Signed-off-by: Keith Packard <keithp@keithp.com>
742 commit 3e2220a180f95971d222a597d2057ca328c27356
743 Author: Bdale Garbee <bdale@gag.com>
744 Date: Mon Nov 29 21:29:14 2010 -0700
746 adding Bdale's release process document to the source tree
748 commit 61a924099800494b589cbbb87c65b552ccbd8394
749 Author: Bdale Garbee <bdale@gag.com>
750 Date: Mon Nov 29 14:40:27 2010 -0700
752 fix an Altos vs Altus typo in the docs
754 commit e840b6594b8a939f148fa7231e1b06a280d94074
755 Author: Bdale Garbee <bdale@gag.com>
756 Date: Sun Nov 28 22:42:43 2010 -0700
760 commit f39698bbc12afdfadfac56c90030e16db93cf4fc
761 Author: Bdale Garbee <bdale@gag.com>
762 Date: Sun Nov 28 19:46:03 2010 -0700
764 fix publish target in doc/Makefile
766 commit 13cea7a96821165a10a8b2433af1da7508882b0a
767 Author: Bdale Garbee <bdale@gag.com>
768 Date: Sun Nov 28 18:48:31 2010 -0700
770 moved doc dir in web content to AltOS tree
772 commit 6f3c72462af86a7d9dec20f4c813a524a5be9fbb
773 Author: Bdale Garbee <bdale@gag.com>
774 Date: Sun Nov 28 18:32:17 2010 -0700
776 update changelogs for Debian build
778 commit a375942979dbcd8239d8c0addb10616e6048f6ea
779 Author: Bdale Garbee <bdale@gag.com>
780 Date: Sun Nov 28 18:31:26 2010 -0700
782 rewind changelog to recover from stupid build failure
784 commit 263cf6c4fc5c1a240d719bb0ceb33393864fb3d6
785 Author: Bdale Garbee <bdale@gag.com>
786 Date: Sun Nov 28 18:24:00 2010 -0700
788 update changelogs for Debian build
790 commit 2615289265b6f8fa08827be794b4eee569fc6333
791 Author: Bdale Garbee <bdale@gag.com>
792 Date: Sun Nov 28 18:23:17 2010 -0700
794 update changelogs for Debian build
796 commit 5e23bcc2d2ad33a839fedd2158213098a05cd9ae
797 Author: Bdale Garbee <bdale@gag.com>
798 Date: Sun Nov 28 18:21:31 2010 -0700
800 declaring 0.8 released
802 commit b09d3e11c32abd07f8e11b483ac4b57148f4f2d8
803 Author: Keith Packard <keithp@keithp.com>
804 Date: Sat Nov 27 23:08:41 2010 -0800
806 windows: Bump .inf file version
808 commit 42c2394ccc1a1ee6dc134ed963a4f79acf031d0b
809 Author: Keith Packard <keithp@keithp.com>
810 Date: Sat Nov 27 23:04:50 2010 -0800
812 windows: more .inf file hacking
814 Add a LayoutFile reference
815 Add the FakeModemCopyFileSection
817 Copy AltosMetrum.Install section to AltusMetrum.Install.NT section. I
818 don't know what this might do; existing files seem inconsistent.
820 Signed-off-by: Keith Packard <keithp@keithp.com>
822 commit 26369a92398f4ebe3fcd54ce34cebffae0cfdf07
823 Author: Keith Packard <keithp@keithp.com>
824 Date: Sat Nov 27 22:39:31 2010 -0800
826 windows: remove some non-existent .inf file section references
828 The mfglt and VerboseResultCodes sections are not present in the .inf
829 file, so remove refernces to them.
831 Signed-off-by: Keith Packard <keithp@keithp.com>
833 commit 641c5373724d34c3adfcf42420a528d6bba736b9
834 Author: Keith Packard <keithp@keithp.com>
835 Date: Sat Nov 27 22:35:18 2010 -0800
837 windows: try harder to get windows install to work
839 Add devIDs to .nsi file. Fix install section name mapping from the
842 Signed-off-by: Keith Packard <keithp@keithp.com>
844 commit cd414e2c04ce5ecbc75f19325a6d6f82cd489fb3
845 Author: Keith Packard <keithp@keithp.com>
846 Date: Sat Nov 27 16:30:29 2010 -0800
848 altosui: Correct windows hardware IDs for nsis installer file
850 Need real hardware IDs (encoded USB ids) to get windows to
851 auto-install the driver?
853 Signed-off-by: Keith Packard <keithp@keithp.com>
855 commit f834b22905db87557f729f942607dc363b013694
856 Author: Bdale Garbee <bdale@gag.com>
857 Date: Thu Nov 25 22:31:33 2010 -0700
859 update changelogs for Debian build
861 commit da3b39d6b1b5ba48686c2a4add4b5448fd5711af
862 Author: Bdale Garbee <bdale@gag.com>
863 Date: Thu Nov 25 22:29:01 2010 -0700
865 changed main document name from telemetrum-doc to altusmetrum
867 commit ab6c9c983a2830bc8807e1b75d2576141b73632d
868 Author: Bdale Garbee <bdale@gag.com>
869 Date: Thu Nov 25 19:30:02 2010 -0700
871 update fat target in Makefiles to reflect move of altosui and libaltos
873 commit b8f05cdc0e9b4a96852eed9d38ff6d5950e2d2ed
874 Author: Keith Packard <keithp@keithp.com>
875 Date: Thu Nov 25 17:29:28 2010 -0800
877 altosui: Clean up flash code to ensure swing gets called from right thread
879 This moves all of the flash code to a separate thread and passes
880 messages back to the swing thread to keep the UI up to date.
882 Signed-off-by: Keith Packard <keithp@keithp.com>
884 commit adbb14c63d85b7a54223f88ac623571456f4a462
885 Author: Keith Packard <keithp@keithp.com>
886 Date: Thu Nov 25 16:28:04 2010 -0800
888 altosui: Remove gratuitous threading from device flashing UI
890 There's no need for a thread here, and swing doesn't want us to use
893 Signed-off-by: Keith Packard <keithp@keithp.com>
895 commit 7f88520089660845009148b69bfcea6c9dff9672
896 Author: Keith Packard <keithp@keithp.com>
897 Date: Thu Nov 25 16:23:18 2010 -0800
899 altosui: Flight data download GUI operations called only from main thread
901 Swing doesn't like UI functions being called from non-dispatch thread,
902 so fix up the eeprom download code to use SwingUtilities.invokeLater
903 to make sure this works right.
905 Signed-off-by: Keith Packard <keithp@keithp.com>
907 commit 6d3612e267cd4c1e7fdd74fc33952b3f26f870f5
908 Author: Keith Packard <keithp@keithp.com>
909 Date: Thu Nov 25 16:09:37 2010 -0800
911 altosui: Eliminate unnecessary thread from config UI
913 There's no reason to use a thread to run a dialog box, and
914 swing doesn't like threads anyways.
916 Signed-off-by: Keith Packard <keithp@keithp.com>
918 commit 12fb7f0e70cd244475d84469f93283112478d1e1
919 Author: Keith Packard <keithp@keithp.com>
920 Date: Thu Nov 25 15:56:42 2010 -0800
922 altosui: Only call swing display functions from main thread.
924 Swing insists that all display functions be called from a single
925 thread, and the flight window wasn't following this for display
926 updates. Use SwingUtilities.invokeLater to make sure the flight UI
927 updates happen in the right context.
929 Fixes a UI freeze on Mac OS.
931 Signed-off-by: Keith Packard <keithp@keithp.com>
933 commit b74cec6cd0bc043f53e9e28472765aa343136813
934 Author: Bob Finch <w9ya@qrparci.net>
935 Date: Thu Nov 25 13:30:48 2010 -0700
937 Updated AltOS PKGBUILD to track makefile changes
939 commit f88bde21d76a4ff91099a5051153ebace1619978
940 Author: Keith Packard <keithp@keithp.com>
941 Date: Thu Nov 25 11:16:55 2010 -0800
943 altosui: Hack up standalone makefile to maybe build altosui again
945 This isn't tested, but at least the paths are more likely to be correct
947 Signed-off-by: Keith Packard <keithp@keithp.com>
949 commit 3d98440d53378aaa6da87ed65e9abb2f96f7ee49
950 Author: Keith Packard <keithp@keithp.com>
951 Date: Thu Nov 25 11:16:28 2010 -0800
953 altosui: Make windows bits build after moving altosui directory
955 Signed-off-by: Keith Packard <keithp@keithp.com>
957 commit 4893ed50bc14772986ac02f9b39928f1882da923
958 Author: Keith Packard <keithp@keithp.com>
959 Date: Wed Nov 24 23:54:08 2010 -0800
961 Revert "altos: Don't abort radio transmissions with ao_radio_abort"
963 This reverts commit 54468e5dc567aaac5c5c20e921859b7cec28bb88.
965 With this patch in place, TD could not be placed in 'packet' mode.
967 commit cb08bc264c71ca972027392b42f347a03df76a43
968 Author: Keith Packard <keithp@keithp.com>
969 Date: Wed Nov 24 22:55:08 2010 -0800
971 doc: Rename telemetrum-doc as altusmetrum
973 Signed-off-by: Keith Packard <keithp@keithp.com>
975 commit 554bdd25e132dbaec322bc11f94093d2c2e78751
976 Author: Keith Packard <keithp@keithp.com>
977 Date: Wed Nov 24 22:49:33 2010 -0800
979 doc: Add more authors, fix URL formatting, note that AltosUI actually exists
981 Add aj and bfinch as authors. Insert an acknowledgements section. Fill
982 in the Fire Igniter section in the AltosUI chapter. Then change the
983 section talking about the future plans for Java to mention that they
986 Signed-off-by: Keith Packard <keithp@keithp.com>
988 commit bcf78b67717374b5971820021b83061e2e9734cf
989 Author: Keith Packard <keithp@keithp.com>
990 Date: Wed Nov 24 21:39:18 2010 -0800
992 doc: Reformat altos to use sections for each function
994 This places them in the TOC, making them easier to find.
996 Signed-off-by: Keith Packard <keithp@keithp.com>
998 commit 51c7741040d95c5deece939dae5e4136cc04afc4
999 Merge: d1dbe3b 4e47c44
1000 Author: Keith Packard <keithp@keithp.com>
1001 Date: Wed Nov 24 21:00:52 2010 -0800
1003 Merge branch 'buttonbox'
1006 doc/telemetrum-doc.xsl
1008 Pull the buttbox version of the docs in as it had been updated.
1010 Signed-off-by: Keith Packard <keithp@keithp.com>
1012 commit 4e47c44d335276cf0dc5ed3a0756e50c98c1b9b9
1013 Author: Bdale Garbee <bdale@gag.com>
1014 Date: Wed Nov 24 21:44:53 2010 -0700
1016 manually fold in documentation work from the master branch
1018 commit 8a68c1da253c0b29a7cb9c7540c20585ad6e3dec
1019 Author: Bdale Garbee <bdale@gag.com>
1020 Date: Wed Nov 24 21:21:53 2010 -0700
1024 commit 7cd1c7765d137df711caeeb69abaaba1b36e0a65
1025 Author: Bdale Garbee <bdale@gag.com>
1026 Date: Wed Nov 24 20:53:36 2010 -0700
1028 fix missing section close in Site Map content
1030 commit db2b19b8f0d452d682d53c7ed0ff6e359b46efa0
1031 Merge: b372f3c 915f881
1032 Author: Keith Packard <keithp@keithp.com>
1033 Date: Wed Nov 24 18:57:35 2010 -0800
1035 Merge remote branch 'aj/buttonbox' into buttonbox
1037 commit b372f3c0ee4ec49aabe61c169cb1eb9bb4fb2cfc
1038 Author: Keith Packard <keithp@keithp.com>
1039 Date: Wed Nov 24 18:50:46 2010 -0800
1041 Missing change to top level Makefile to build altosui
1043 Signed-off-by: Keith Packard <keithp@keithp.com>
1045 commit 915f881d61294dc6f5a6a3e8d75567e18492a631
1046 Author: Anthony Towns <aj@erisian.com.au>
1047 Date: Thu Nov 25 09:52:30 2010 +1000
1049 doc: Document altosui "Site Map" tab
1051 commit f01096c4b42f9a4720ed0414826c2a283a992545
1052 Merge: 357826a 3fbefb3
1053 Author: Anthony Towns <aj@erisian.com.au>
1054 Date: Thu Nov 25 09:10:50 2010 +1000
1056 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1058 commit 3fbefb3eea981d34a09496cf8abf0119de2e35bf
1059 Author: Keith Packard <keithp@keithp.com>
1060 Date: Wed Nov 24 14:57:57 2010 -0800
1062 Move altosui to the top level, placing libaltos inside it.
1064 Signed-off-by: Keith Packard <keithp@keithp.com>
1066 commit 357826aa9c7b42c59f5d52b8eb016d73b6da0c7f
1067 Author: Anthony Towns <aj@erisian.com.au>
1068 Date: Thu Nov 25 09:07:34 2010 +1000
1070 docs: Document altosui "Graph Data" button
1072 commit 7811e6dfa6caf10251da7df7c24b98cdc3787892
1073 Merge: 71b1949 7a50837
1074 Author: Anthony Towns <aj@erisian.com.au>
1075 Date: Thu Nov 25 08:47:36 2010 +1000
1077 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1079 commit 7a50837ea0d92db3f469f197ec8210aee22aa143
1080 Author: Keith Packard <keithp@keithp.com>
1081 Date: Wed Nov 24 10:55:18 2010 -0800
1083 altosui: Make sure packet mode is turned off when the connection fails
1085 When the packet connection times out, turn packet mode off when
1086 closing the serial port.
1088 Signed-off-by: Keith Packard <keithp@keithp.com>
1090 commit 7d90e2f6009e060fb59c519f7e564483a7ca6872
1091 Author: Keith Packard <keithp@keithp.com>
1092 Date: Tue Nov 23 20:17:44 2010 -0800
1094 altosui: Let people fire igniters that don't read as 'ready'
1096 This provides for igniter testing with LEDs or other materials that
1097 don't look like regular igniters.
1099 Signed-off-by: Keith Packard <keithp@keithp.com>
1101 commit f3233985a132e1d660e6df12d0056b6729f16faf
1102 Author: Keith Packard <keithp@keithp.com>
1103 Date: Tue Nov 23 19:09:31 2010 -0800
1105 altosui: Disable radio configation over packet link.
1107 Attempting to configure the radio over the packet link will only end
1108 up confusing the user, so disable it. This also works around a bug in
1109 older TM code which would lock up when trying to do this.
1111 Signed-off-by: Keith Packard <keithp@keithp.com>
1113 commit 6cd9be22f06f21d12ee2f668989d83d3c61d14c0
1114 Author: Keith Packard <keithp@keithp.com>
1115 Date: Tue Nov 23 19:08:07 2010 -0800
1117 altosui: New AltosSerial.set_radio function sets channel/call
1119 Use this anytime you need to set the device radio channel and call
1120 sign, either for telemetry reception or packet mode origination. This
1121 uses the saved callsign and per-device radio channel number. Do not
1122 use this when opening a telemetrum as there won't be a saved channel number.
1124 Signed-off-by: Keith Packard <keithp@keithp.com>
1126 commit ed7cf7d262fcf7c0c677c2fb981582b571de9e5e
1127 Author: Keith Packard <keithp@keithp.com>
1128 Date: Tue Nov 23 19:04:55 2010 -0800
1130 altosui: Make AltosSerial.flush_input keep reading while non-empty
1132 Flushing the input buffer can take a while, especially over the packet
1133 link. Keep reading while stuff is appearing on the reply queue.
1135 Signed-off-by: Keith Packard <keithp@keithp.com>
1137 commit 3b9db8c82d26a6a2e43d4ca40742fc1bdc502380
1138 Author: Keith Packard <keithp@keithp.com>
1139 Date: Tue Nov 23 19:02:54 2010 -0800
1141 altos: Make radio test command careful with the radio mutex.
1143 Remember whether the radio test mode is on or off and don't try to do
1144 either of them twice to prevent the mutex from being acquired or
1147 Signed-off-by: Keith Packard <keithp@keithp.com>
1149 commit 54468e5dc567aaac5c5c20e921859b7cec28bb88
1150 Author: Keith Packard <keithp@keithp.com>
1151 Date: Tue Nov 23 18:57:49 2010 -0800
1153 altos: Don't abort radio transmissions with ao_radio_abort
1155 We only want to abort pending radio reception to release the radio for
1156 other use, or to change the radio channel. Let radio transmission
1157 proceed. This fixes a problem with using packet mode to configure the
1158 radio channel; if the packet transmission is aborted, the TM ends up
1161 Signed-off-by: Keith Packard <keithp@keithp.com>
1163 commit d873dc28f0752aeb58a6263e42bdd5b9095bd392
1164 Author: Keith Packard <keithp@keithp.com>
1165 Date: Tue Nov 23 18:56:46 2010 -0800
1167 altos: remove unused variable from ao_igniter
1169 The 'status' variable used to hold a reported status value from the
1170 igniter after firing, but we ignore that now.
1172 Signed-off-by: Keith Packard <keithp@keithp.com>
1174 commit 71b1949e50f4533bcf44537da65b19bc67863c8e
1175 Merge: a79225c f1892b1
1176 Author: Anthony Towns <aj@erisian.com.au>
1177 Date: Wed Nov 24 12:14:11 2010 +1000
1179 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1181 commit f1892b137b1de3d6caf0293bd40ed5c3e4948066
1182 Author: Bdale Garbee <bdale@gag.com>
1183 Date: Tue Nov 23 18:58:11 2010 -0700
1185 lose the placeholder on how GPS works, as it's going to be a
1186 while before I tackle that, if ever.
1188 commit a79225c215f17fa5218ddd9db4fc3f5c563a9f74
1189 Merge: 84cd5d4 853b711
1190 Author: Anthony Towns <aj@erisian.com.au>
1191 Date: Wed Nov 24 11:55:14 2010 +1000
1193 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1195 commit 853b7112e34212040c4cb7289f9cfdb2f3ea9f90
1196 Author: Bdale Garbee <bdale@gag.com>
1197 Date: Tue Nov 23 18:53:18 2010 -0700
1199 merge Keith's AltosUI documention into "the big book"
1201 commit 84cd5d42d8b5659463544fe2a400758b56478609
1202 Author: Anthony Towns <aj@erisian.com.au>
1203 Date: Wed Nov 24 02:13:32 2010 +1000
1205 altosui: sitemap uses rocket gps if no pad gps
1207 commit c7119c21baa9d4ca681975b8613ade6593f65577
1208 Author: Anthony Towns <aj@erisian.com.au>
1209 Date: Wed Nov 24 02:11:36 2010 +1000
1211 altosui: don't switch away from user selected tab
1213 commit ae55a107f12546dc65f04618c7abc17beb920d73
1214 Merge: d1005f6 737f2fd
1215 Author: Anthony Towns <aj@erisian.com.au>
1216 Date: Wed Nov 24 01:53:46 2010 +1000
1218 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1220 commit 737f2fdd012202f453120ece117ae5e859b32082
1221 Author: Keith Packard <keithp@keithp.com>
1222 Date: Mon Nov 22 22:26:19 2010 -0800
1224 doc: Add internal documentation for AltOS
1226 Signed-off-by: Keith Packard <keithp@keithp.com>
1228 commit 5523e7d55ecc8d310e495fa4f5115f7483c42d65
1229 Author: Bdale Garbee <bdale@gag.com>
1230 Date: Mon Nov 22 21:07:10 2010 -0700
1232 add a rudimentary --help for command line use
1234 commit d1005f68376d695039c314b8d7a68bbf9acbca4f
1235 Merge: 9a83e0d 22c0978
1236 Author: Anthony Towns <aj@erisian.com.au>
1237 Date: Tue Nov 23 10:14:55 2010 +1000
1239 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1241 commit 22c09781af1df4b38562b577e9926c23e4a397f2
1242 Merge: b27327a a79606a
1243 Author: Keith Packard <keithp@keithp.com>
1244 Date: Mon Nov 22 16:02:22 2010 -0800
1246 Merge remote branch 'origin/buttonbox' into buttonbox
1248 commit b27327a05d249eaf969b67d2a8d12fc6a93841f0
1249 Author: Keith Packard <keithp@keithp.com>
1250 Date: Mon Nov 22 15:56:04 2010 -0800
1252 altos: assume igniter worked.
1254 Many igniters don't go open when fired, so there's no way
1255 to know if they worked. Assume they did as a failed igniter is
1256 unlikely to do anything when fired again anyways.
1258 Signed-off-by: Keith Packard <keithp@keithp.com>
1260 commit 68323cbb222f1f33198a42abaa0550af22f75a93
1261 Author: Keith Packard <keithp@keithp.com>
1262 Date: Mon Nov 22 15:53:27 2010 -0800
1264 altosui: Close serial port when debug link fails
1266 If the debug connection isn't working, close down the serial port when
1267 reporting the failure.
1269 Signed-off-by: Keith Packard <keithp@keithp.com>
1271 commit 9a83e0dc79f7a7467c7814d58daa2a2b89e50972
1272 Merge: 902735f a79606a
1273 Author: Anthony Towns <aj@erisian.com.au>
1274 Date: Tue Nov 23 08:07:04 2010 +1000
1276 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1278 commit a79606a6507fc01a74910f7959e84c4e9a730714
1279 Author: Bob Finch <w9ya@qrparci.net>
1280 Date: Mon Nov 22 12:24:42 2010 -0700
1282 Added PKGBUILDs for deps into contribs
1284 commit 377ee7e90ecd028f984cd1abce96b2efc3b5b977
1285 Author: Keith Packard <keithp@keithp.com>
1286 Date: Sun Nov 21 14:03:17 2010 -0800
1288 altos: Add on/off modes to 'C' command
1290 This lets the user turn the radio on/off and then invoke other commands.
1292 Signed-off-by: Keith Packard <keithp@keithp.com>
1294 commit 902735ffbfdd97672d52b09f17cdcd619193fd05
1295 Author: Anthony Towns <aj@erisian.com.au>
1296 Date: Mon Nov 22 05:29:26 2010 +1000
1298 altosui: keep sitemap more centred on rocket
1300 commit b85df38b5611e45cb9296df07b720badf74ac26e
1301 Author: Anthony Towns <aj@erisian.com.au>
1302 Date: Mon Nov 22 05:22:17 2010 +1000
1304 altosui: improve sitemap scrolling behaviour
1306 commit 4a9ded5b39ed08e13abc2cddba8b712f62b983f2
1307 Author: Anthony Towns <aj@erisian.com.au>
1308 Date: Sun Nov 21 17:39:50 2010 +1000
1310 AltosSiteMap: ensure buffer around active tile
1312 commit ec47bc93a487614714a752cb30ec9fe3d8f72929
1313 Merge: 0393830 e7954c8
1314 Author: Anthony Towns <aj@erisian.com.au>
1315 Date: Sun Nov 21 16:08:37 2010 +1000
1317 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1319 commit e7954c820763f80e993f9f822e837725cf36af84
1320 Author: Keith Packard <keithp@keithp.com>
1321 Date: Sat Nov 20 22:03:26 2010 -0800
1323 altosui: When fixing eeprom gps time information, make GPS data valid
1325 Eeprom files may be missing the GPS time (due to a firmware bug). Working
1326 around this involves finding the next valid GPS time and using that to
1327 create a fake GPS time entry. However, that next GPS time may not
1328 be locked or may have few sats as it is from the boost stage of the
1329 flight. Fix this by simply forcing the fake time packet to have
1330 4 sats and be locked.
1332 Signed-off-by: Keith Packard <keithp@keithp.com>
1334 commit 0393830f85da5efc96bbdf0d9769b66019c34b33
1335 Author: Anthony Towns <aj@erisian.com.au>
1336 Date: Sun Nov 21 15:13:35 2010 +1000
1338 AltosSiteMap: limit nr of tiles to 200x200
1340 commit a08b2a6363c194195db92029743f6612676373ce
1341 Author: Anthony Towns <aj@erisian.com.au>
1342 Date: Sun Nov 21 15:03:21 2010 +1000
1344 AltosSiteMap: never accept 0,0 as lat/long
1346 commit 84e570d8a8a52e0d358582135ec1b3a12be94c26
1347 Author: Anthony Towns <aj@erisian.com.au>
1348 Date: Sun Nov 21 14:45:10 2010 +1000
1350 AltosSiteMap: refactor tile collection
1352 commit 71e487344395a8efc9cd279aad92f601ff4c6d3d
1353 Author: Anthony Towns <aj@erisian.com.au>
1354 Date: Sun Nov 21 14:05:00 2010 +1000
1356 AltosSiteMap: thread safe tile addition
1358 commit c040bcd06679484175542208fb564d0271a7fc1b
1359 Author: Anthony Towns <aj@erisian.com.au>
1360 Date: Sun Nov 21 13:19:36 2010 +1000
1362 AltosSiteMap: try to get new tile construction right
1364 commit c3994dd82d489289ebc99ff9c5fa88f560c023ac
1365 Author: Anthony Towns <aj@erisian.com.au>
1366 Date: Sun Nov 21 13:07:11 2010 +1000
1368 AltosSiteMap: extend map if rocket goes far away
1370 commit 835b903727a2eabda8d9659cc46e53301f92897c
1371 Merge: 440a0f3 8789135
1372 Author: Anthony Towns <aj@erisian.com.au>
1373 Date: Sun Nov 21 11:15:02 2010 +1000
1375 Merge branch 'sitemap' into buttonbox
1378 ao-tools/altosui/AltosSiteMap.java
1380 commit 878913551a1e4e3c8f2b39fa4aeb234880735a1c
1381 Author: Anthony Towns <aj@erisian.com.au>
1382 Date: Sun Nov 21 10:55:22 2010 +1000
1384 AltosSiteMap: explain tile size better
1386 commit 440a0f3f5130eb0c8e614691892be8c94e7fd3c3
1387 Author: Keith Packard <keithp@keithp.com>
1388 Date: Sat Nov 20 16:55:12 2010 -0800
1390 altosui: Set site map flight path lines to 6 pixels anti-aliased.
1392 Much more visible over the map.
1394 Signed-off-by: Keith Packard <keithp@keithp.com>
1396 commit 2a7dc3ba36bac81640a9498e0d0caf1470b57c19
1397 Merge: e5b1ada ece2c86
1398 Author: Anthony Towns <aj@erisian.com.au>
1399 Date: Sun Nov 21 10:45:15 2010 +1000
1401 Merge branch 'buttonbox' into sitemap
1404 ao-tools/altosui/AltosFlightUI.java
1406 commit 8df185cd95cfecbed8272dd1275d077c5b45535b
1407 Merge: ece2c86 1e71264
1408 Author: Keith Packard <keithp@keithp.com>
1409 Date: Sat Nov 20 16:35:48 2010 -0800
1411 Merge remote branch 'aj/sitemap' into buttonbox
1414 ao-tools/altosui/AltosFlightUI.java
1416 Signed-off-by: Keith Packard <keithp@keithp.com>
1418 commit e5b1adae9b23b98a6321986f5cd67c9d3166b87f
1419 Author: Anthony Towns <aj@erisian.com.au>
1420 Date: Sun Nov 21 10:34:39 2010 +1000
1422 AltosSiteMap: better gps check, lower zoom
1424 commit ece2c86e2641b2cd613791293526c492b1606aa1
1425 Author: Keith Packard <keithp@keithp.com>
1426 Date: Sat Nov 20 16:19:42 2010 -0800
1428 altosui: Rewrite info table to mix with scroll pane well. Fix startup size
1430 Using a single table for the info table means that the scroll pane
1431 automatically picks up the table headers and shows them above the
1434 This patch also fixes the application size at startup so that no
1435 scrollbar is required in the info table, and the window is < 800x600.
1437 Signed-off-by: Keith Packard <keithp@keithp.com>
1439 commit 1e712647dd6df1e77650db705f3ac32a3c8f6907
1440 Author: Anthony Towns <aj@erisian.com.au>
1441 Date: Sun Nov 21 08:58:44 2010 +1000
1445 commit a59a204e188e40ec8848a0dc63d6de710cee3039
1446 Merge: 8263630 37f0201
1447 Author: Anthony Towns <aj@erisian.com.au>
1448 Date: Sun Nov 21 08:56:13 2010 +1000
1450 Merge branch 'buttonbox' into sitemap
1452 commit 82636305021c41d676f5f0f11378724fe0de0079
1453 Author: Anthony Towns <aj@erisian.com.au>
1454 Date: Sun Nov 21 08:44:13 2010 +1000
1456 AltosSiteMap: be more polite about preferred size
1458 commit 37f0201d724693528f37ac7d275f68f90cf94da0
1459 Author: Keith Packard <keithp@keithp.com>
1460 Date: Sat Nov 20 14:31:23 2010 -0800
1462 altosui: change descent tab formatting to four columns
1464 This places labels to the left of each field. For igniter voltages,
1465 it uses three columns for the labels.
1467 Signed-off-by: Keith Packard <keithp@keithp.com>
1469 commit 66ebd954d9c9a44a8db0ee713c682e39306fabd8
1470 Author: Anthony Towns <aj@erisian.com.au>
1471 Date: Sun Nov 21 08:28:24 2010 +1000
1475 commit 72f5e05f9f0055f2cef8b840812f090556c94338
1476 Author: Anthony Towns <aj@erisian.com.au>
1477 Date: Sun Nov 21 08:18:39 2010 +1000
1479 AltosSiteMap: major refactoring
1481 commit b47517d4c2e49f6f7b9954d2c85f96397fe1103e
1482 Author: Keith Packard <keithp@keithp.com>
1483 Date: Sat Nov 20 14:06:37 2010 -0800
1487 commit 6f8bc2ad20b715343e0510563ab0f14787ef3e07
1488 Author: Anthony Towns <aj@erisian.com.au>
1489 Date: Sun Nov 21 01:34:52 2010 +1000
1491 AltosDescent: switch elev from height to range
1493 commit 89f44c5587ea4f927d5e398b6af919df0d6561c3
1494 Author: Anthony Towns <aj@erisian.com.au>
1495 Date: Sun Nov 21 01:27:01 2010 +1000
1497 AltosAscent/Descent: tidy up layout
1499 commit 51e403145d28ac913e36d205077a613845596be2
1500 Author: Anthony Towns <aj@erisian.com.au>
1501 Date: Sun Nov 21 00:17:51 2010 +1000
1503 AltosSiteMapTile: draw boost circle as well as landed
1505 commit 25ffe1cc7823895886b4777f310b4bda1c80133b
1506 Author: Anthony Towns <aj@erisian.com.au>
1507 Date: Sun Nov 21 00:07:16 2010 +1000
1509 AltosSiteMap: automatic fetching of map data
1511 commit 20f714bbe3137de8fb7491b39985021fd1774930
1512 Author: Anthony Towns <aj@erisian.com.au>
1513 Date: Sat Nov 20 22:49:51 2010 +1000
1515 AltosSiteMapTile: seperate map and drawing layers
1517 commit 58f8d069ce9488e2987b8e92caa69fe68cda7569
1518 Author: Anthony Towns <aj@erisian.com.au>
1519 Date: Sat Nov 20 21:06:37 2010 +1000
1521 AltosSiteMap: add autoscroll and grabndrag scroll
1523 commit 74cab8503b51ba6fb05a4d12a031c749e870b0ef
1524 Merge: 0ecf033 9a99cab
1525 Author: Anthony Towns <aj@erisian.com.au>
1526 Date: Sat Nov 20 18:20:45 2010 +1000
1528 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1530 commit 0ecf033110084f1a8be98282d7029dc14f70dab5
1531 Merge: 081fbd5 71c41ea
1532 Author: Anthony Towns <aj@erisian.com.au>
1533 Date: Sat Nov 20 18:14:30 2010 +1000
1535 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1537 commit 9a99cabc1c34c657fc95246192ba6d330f5f22d3
1538 Author: Keith Packard <keithp@keithp.com>
1539 Date: Sat Nov 20 00:13:58 2010 -0800
1541 altosui: Fix channel changing in flight UI to actually work
1543 Replacing the menu with a combo box required reworking the way events
1544 are delivered from that widget back to the channel changing
1545 function. Just delete the old magic and use the JComboBox action
1548 Signed-off-by: Keith Packard <keithp@keithp.com>
1550 commit 71c41eadd12c3ece5fffce7669e4991778046d4e
1551 Author: Keith Packard <keithp@keithp.com>
1552 Date: Sat Nov 20 00:09:03 2010 -0800
1554 altosui: Initialize display thread state in constructor instead of run
1556 Some state will get set before run is called, initializing it there
1559 Signed-off-by: Keith Packard <keithp@keithp.com>
1561 commit 081fbd5715f9d3d81d98e149fb95d40447c07a79
1562 Merge: 90b9bc4 7920ed5
1563 Author: Anthony Towns <aj@erisian.com.au>
1564 Date: Sat Nov 20 17:40:49 2010 +1000
1566 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1569 ao-tools/altosui/AltosFlightUI.java
1571 commit 7920ed5c34b088f45ce4213b061ddd1ffe22cee8
1572 Author: Keith Packard <keithp@keithp.com>
1573 Date: Fri Nov 19 23:18:51 2010 -0800
1575 altosui: calling thread.interrupt with null thread doesn't work well
1577 This was a left-over from debugging the previous patch.
1579 Signed-off-by: Keith Packard <keithp@keithp.com>
1581 commit 8c8dc3794c7b5fa5a5b43b1c461d6c8bb3ab425d
1582 Author: Keith Packard <keithp@keithp.com>
1583 Date: Fri Nov 19 23:09:15 2010 -0800
1585 altosui: When switching log files, don't terminate log thread
1587 The log thread automatically switches output files when the incoming
1588 telemetry changes. Don't use 'close' for that as 'close' terminates
1589 the log thread as well as closing the file. Create a new
1590 'close_log_file' function which just closes the file.
1592 Signed-off-by: Keith Packard <keithp@keithp.com>
1594 commit 594e80572821f1848db062d0cff18ca8bf0d90ce
1595 Author: Keith Packard <keithp@keithp.com>
1596 Date: Fri Nov 19 22:44:48 2010 -0800
1598 altosui: switch channel selector to combo box. Shorten displayed device names
1600 A combo box displays the current value, which is quite nice to
1601 have. Add a 'toShortString' for AltosDevice so that the window frames
1602 and error messages don't have extra spaces generated by the
1603 altos_device toString method.
1605 Signed-off-by: Keith Packard <keithp@keithp.com>
1607 commit fa07afc73bc5eccff8464a2def05ad600da33c97
1608 Author: Bdale Garbee <bdale@gag.com>
1609 Date: Fri Nov 19 23:33:42 2010 -0700
1611 update turnon scripts to use stashed copies of stable release firmware
1613 commit 9ffc2eb53a47e435f39b02896b0e43ae5f47f450
1614 Author: Keith Packard <keithp@keithp.com>
1615 Date: Fri Nov 19 18:25:48 2010 -0800
1617 altosui: Use timeouts to recover from broken packet links.
1619 This puts timeouts every place the system reads from the packet link
1620 and aborts the in-progress operation if it takes more than a second to
1623 Also mixed in here are persistent igniter status displays for the
1624 ejection testing UI.
1626 Signed-off-by: Keith Packard <keithp@keithp.com>
1628 commit 68078eab3c07d8dc83302747cf6f3dcb1797c6ce
1629 Author: Keith Packard <keithp@keithp.com>
1630 Date: Fri Nov 19 20:44:29 2010 +0800
1632 doc: Document the 'Flash Image' operation.
1634 Signed-off-by: Keith Packard <keithp@keithp.com>
1636 commit b4bdda65488e8ef27d2889cb6cc8eda3c5d50e0a
1637 Author: Keith Packard <keithp@keithp.com>
1638 Date: Fri Nov 19 20:29:14 2010 +0800
1640 doc: git ignore generated doc files
1642 Signed-off-by: Keith Packard <keithp@keithp.com>
1644 commit f0542085de2139ef562af068ec05fa73f47c73b1
1645 Author: Keith Packard <keithp@keithp.com>
1646 Date: Fri Nov 19 20:26:49 2010 +0800
1648 doc: Add preliminary altosui documentation
1650 Also, update the Makefile to allow for further documents to be added
1651 without a lot of custom rules.
1653 Signed-off-by: Keith Packard <keithp@keithp.com>
1655 commit 0e7a10f71803d60f8b34c5a91efd220449442769
1656 Author: Keith Packard <keithp@keithp.com>
1657 Date: Fri Nov 19 17:16:03 2010 +0800
1659 altosui: Clean up global AltosUI configuration settings dialog
1661 This dialog had a mish-mash of styles and was confusing.
1662 Now it's got a label for each line, and suitable setters for
1665 Signed-off-by: Keith Packard <keithp@keithp.com>
1667 commit 8f72f08839346fb225238420324f0edcd070e531
1668 Author: Keith Packard <keithp@keithp.com>
1669 Date: Fri Nov 19 17:14:17 2010 +0800
1671 altosui: Unify datafile selection to AltosDataChooser
1673 Instead of having several separate intefaces, use a single dialog for
1674 selecting data files for graph/export/replay.
1676 Signed-off-by: Keith Packard <keithp@keithp.com>
1678 commit 24ffcf86c43290ce0f70fb4ee0984b3debdb8a5f
1679 Author: Keith Packard <keithp@keithp.com>
1680 Date: Fri Nov 19 15:41:30 2010 +0800
1682 altosui: Add igniter ground testing code
1684 Not yet hooked up, but the UI is finished.
1686 Signed-off-by: Keith Packard <keithp@keithp.com>
1688 commit 90b9bc4475011bead7117ed72fa5efa0f77b2813
1689 Author: Anthony Towns <aj@erisian.com.au>
1690 Date: Fri Nov 19 13:30:00 2010 +1000
1692 AltosSiteMapTile: adjust scale to 1 nmi per tile
1694 commit fa45336062523838ba8abb08427cdc4d9c7de7a8
1695 Author: Anthony Towns <aj@erisian.com.au>
1696 Date: Fri Nov 19 13:17:29 2010 +1000
1698 AltosSiteMapTile: adjust centering calculation
1700 commit fda93afcd8aa4133b0e5f008b824d072e338d0ed
1701 Author: Anthony Towns <aj@erisian.com.au>
1702 Date: Fri Nov 19 13:02:05 2010 +1000
1704 AltosSiteMapTile: autoscale to about 2 nmi per tile
1706 commit 483346a03c94b200692f5e6d59f3feee4dcf2ace
1707 Author: Anthony Towns <aj@erisian.com.au>
1708 Date: Fri Nov 19 12:09:46 2010 +1000
1710 altosui: tile site maps
1712 commit 939be6793238a275b7682ecc376fed14379cf044
1713 Merge: e68fe94 1a4b6e9
1714 Author: Anthony Towns <aj@erisian.com.au>
1715 Date: Thu Nov 18 05:54:06 2010 +1000
1717 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1720 ao-tools/altosui/AltosFlightUI.java
1722 commit 1a4b6e96f823035b113f01d1bdfd61afc1f33e25
1723 Author: Keith Packard <keithp@keithp.com>
1724 Date: Tue Nov 16 22:46:29 2010 +0800
1726 altosui: Add igniter status to ascent and descent tabs
1728 Monitor igniters during all phases of the flight.
1730 Signed-off-by: Keith Packard <keithp@keithp.com>
1732 commit d0eb41619544ead6d9dab3a8d024a12936c9cdd0
1733 Author: Keith Packard <keithp@keithp.com>
1734 Date: Tue Nov 16 22:20:00 2010 +0800
1736 altosui: Cleanup flight UI layout
1738 Use common constants for fonts and insets
1739 Shrink fonts so that the window is < 600 pixels tall.
1741 Signed-off-by: Keith Packard <keithp@keithp.com>
1743 commit fcca333cda64be35f0c9fb0109eef1be3709dddd
1744 Author: Keith Packard <keithp@keithp.com>
1745 Date: Tue Nov 16 21:49:59 2010 +0800
1747 altosui: Add callsign configuration in AltosUI configuration dialog
1749 This callsign is used during packet communication.
1751 Signed-off-by: Keith Packard <keithp@keithp.com>
1753 commit d1dbe3b69e6f95ef8ecd4cf959863b922ab47c66
1754 Author: Bdale Garbee <bdale@gag.com>
1755 Date: Mon Nov 15 11:08:00 2010 -0700
1757 add a paragraph about forcing TM back to idle mode if an accel cal goes badly
1759 commit 39e371561469d8e5059638ffa4e7075f391de268
1760 Author: Keith Packard <keithp@keithp.com>
1761 Date: Mon Nov 15 23:14:51 2010 +0800
1763 altosui: add reboot button to telemetrum configuration UI
1765 This lets you reconfigure and reboot telemetrum, including over the
1768 Signed-off-by: Keith Packard <keithp@keithp.com>
1770 commit 257e97137325f5dbbd6aa034f20fd6937b67df90
1771 Author: Keith Packard <keithp@keithp.com>
1772 Date: Mon Nov 15 22:38:35 2010 +0800
1774 altosui: eliminate menu bar, moving elements to buttons.
1776 This adds a new 'configure AltosUI' dialog to set the log directory
1777 and voice preferences.
1779 Signed-off-by: Keith Packard <keithp@keithp.com>
1781 commit 524644d8d8ce3f8a5a914ecfc7e2a8d474d89095
1782 Author: Keith Packard <keithp@keithp.com>
1783 Date: Mon Nov 15 22:04:44 2010 +0800
1785 altosui: oops, missed a file in the previous commit
1787 AltosSerialInUseException.java just defines a new exception, thanks to
1788 java for making this live in a separate file.
1790 Signed-off-by: Keith Packard <keithp@keithp.com>
1792 commit 511903704f7e1b22e88dd3e3cc35fd3c0583820e
1793 Author: Keith Packard <keithp@keithp.com>
1794 Date: Sun Nov 14 03:26:57 2010 -0800
1796 altosui: With --replay option, exit when replay window is closed
1798 Otherwise, the application hangs around forever.
1800 Signed-off-by: Keith Packard <keithp@keithp.com>
1802 commit 11c95f687b1f68d35fa1a0af2c4e7982b8bb226a
1803 Author: Keith Packard <keithp@keithp.com>
1804 Date: Sat Nov 13 17:09:51 2010 -0800
1806 altosui: Replace flight status table with labels, fix resize.
1808 There's no reason to use a table for the flight status data,
1809 replace that with a selection of widgets instead.
1811 Also, set all of the grid bag constraints for the various flight
1812 status displays so that resize does something sensible.
1814 Adds a scrollbar to the table display so that it can shrink.
1816 Signed-off-by: Keith Packard <keithp@keithp.com>
1818 commit dcfa56498d1b65a213b8aba9cbd6c4806532383c
1819 Author: Keith Packard <keithp@keithp.com>
1820 Date: Sat Nov 13 16:07:04 2010 -0800
1822 altosui: Open serial device at 'new' time. Prohibit duplicate opens.
1824 With the per-serial UI, there's never a reason to create a serial
1825 device without opening it right away. This eliminates the bug caused
1826 by not opening the serial device for telemetry reception.
1828 Serial devices can now be opened only once; this eliminates errors
1829 when trying to reflash or configure devices while receiving telemetry.
1831 Signed-off-by: Keith Packard <keithp@keithp.com>
1833 commit 8463ffcaca6bcd31e645aba71c171f548dce96d8
1834 Author: Keith Packard <keithp@keithp.com>
1835 Date: Sat Nov 13 15:19:14 2010 -0800
1837 altosui: Eliminate unncessary import altosui lines
1839 Java appears to automatically import every module from the current
1842 Signed-off-by: Keith Packard <keithp@keithp.com>
1844 commit 566c6486c8815ae241e0b116a93b1a0ff4783831
1845 Author: Bdale Garbee <bdale@gag.com>
1846 Date: Sat Nov 13 12:19:12 2010 -0700
1848 continuing to work on the docs
1850 commit e68fe9454352087889c560d95797922493117acb
1851 Author: Anthony Towns <aj@erisian.com.au>
1852 Date: Sun Nov 14 00:59:01 2010 +1000
1854 AltosSiteMap: add targeting circles around landing site
1856 commit 1e7e02987276847274493312202d22222c953149
1857 Author: Anthony Towns <aj@erisian.com.au>
1858 Date: Sun Nov 14 00:57:45 2010 +1000
1860 AltosTelemetryReader: actually open serial port
1862 commit 9c32b93ef5fb43558fb0179ea1b047e35b7ed6e8
1863 Merge: 991541f a6f30fa
1864 Author: Anthony Towns <aj@erisian.com.au>
1865 Date: Sun Nov 14 00:29:11 2010 +1000
1867 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
1869 commit a6f30fae906bd87dff192c5fd4d10df283f99930
1870 Author: Keith Packard <keithp@keithp.com>
1871 Date: Fri Nov 12 17:02:22 2010 -0800
1873 altosui: Add RF calibration to TeleMetrum config dialog
1875 I think that's the last user-settable value.
1877 Signed-off-by: Keith Packard <keithp@keithp.com>
1879 commit 1bdc6166f3bc5ce3f8e55acb1484923781412e21
1880 Merge: f111871 5c6a533
1881 Author: Bdale Garbee <bdale@gag.com>
1882 Date: Fri Nov 12 17:32:43 2010 -0700
1884 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
1886 commit f1118717780a81f9257d2eed7828b66538deb8a8
1887 Author: Bdale Garbee <bdale@gag.com>
1888 Date: Fri Nov 12 17:32:21 2010 -0700
1890 fold in content from Keith's email on the re-flashing subject
1892 commit 7def9dd0d0a4ce9cf7c65de573100e664f278717
1893 Author: Bdale Garbee <bdale@gag.com>
1894 Date: Fri Nov 12 10:58:54 2010 -0700
1896 first cut at instructions on how to re-flash TM and TD devices based on email
1897 reply to a user who asked
1899 commit 991541f57f065f429c6ec425efd6ac731280b2c1
1900 Author: Anthony Towns <aj@erisian.com.au>
1901 Date: Fri Nov 12 23:42:42 2010 +1000
1903 better error behaviour if no map
1905 commit 1bcfa22de7821984149db10cb79913efed36b41e
1906 Author: Anthony Towns <aj@erisian.com.au>
1907 Date: Fri Nov 12 23:29:40 2010 +1000
1909 pull up maps for arbitrary locations
1911 commit beb6c881ec006241c7d2820c64e5381131d41180
1912 Author: Anthony Towns <aj@erisian.com.au>
1913 Date: Fri Nov 12 03:24:26 2010 +1000
1915 make infotable scrollable, revert its fontsize to 14
1917 commit 0327c1da01a3f6ede01f05c1d775651a57fd0c68
1918 Author: Anthony Towns <aj@erisian.com.au>
1919 Date: Fri Nov 12 02:08:58 2010 +1000
1923 commit 81e7b43ecad666e2e2310c7c94184f888bc86585
1924 Author: Anthony Towns <aj@erisian.com.au>
1925 Date: Fri Nov 12 02:07:41 2010 +1000
1927 add site map tab, at least for QRS launches
1929 commit 5394548fa5c7bdbfcc01e8aa19e93e1cf6345e2a
1930 Merge: 891e629 75f7698
1931 Author: Keith Packard <keithp@keithp.com>
1932 Date: Wed Nov 10 22:11:21 2010 -0800
1934 Merge remote branch 'aj/buttonbox' into buttonbox
1936 commit 75f7698b99a661ed17a91748a99699fa6761772a
1937 Author: Anthony Towns <aj@erisian.com.au>
1938 Date: Thu Nov 11 16:06:32 2010 +1000
1940 add compass bearing during descent
1942 commit cc0a730de093c49be2a921101d27622b6f592e92
1943 Author: Anthony Towns <aj@erisian.com.au>
1944 Date: Thu Nov 11 15:57:52 2010 +1000
1946 add compass bearing to voice output
1948 commit 317ec72a34906faad88c6924e634617b074e71db
1949 Author: Anthony Towns <aj@erisian.com.au>
1950 Date: Thu Nov 11 15:52:01 2010 +1000
1952 use grayled.png for off
1954 commit 8503943e3613f8670b128012b12ff14fb54321d7
1955 Author: Anthony Towns <aj@erisian.com.au>
1956 Date: Thu Nov 11 15:45:43 2010 +1000
1958 reduce font size for FlightInfoTable
1960 commit 3ffaa5d1c00b28be20fd4a26deb7bd41d953e92a
1961 Author: Anthony Towns <aj@erisian.com.au>
1962 Date: Thu Nov 11 15:43:05 2010 +1000
1964 read preferences for --replay
1966 commit 1f3e091efdfb2fe6f06a066cac60f5d267b94856
1967 Author: Anthony Towns <aj@erisian.com.au>
1968 Date: Thu Nov 11 15:40:37 2010 +1000
1970 add --replay command line argument
1972 commit b16b873723ee3e5097e6725c59ce191119439ad7
1973 Author: Anthony Towns <aj@erisian.com.au>
1974 Date: Thu Nov 11 15:38:27 2010 +1000
1976 use value_font for values
1978 commit 891e629f6ba20654b614f3ca7211a0f1c92670cb
1979 Author: Keith Packard <keithp@keithp.com>
1980 Date: Wed Nov 10 16:28:19 2010 -0800
1982 altos: Use grey leds when unlit - easier to see
1984 commit 5c6a5335a057be0219450b4b9889c647d8d4a012
1985 Author: Bob Finch <w9ya@qrparci.net>
1986 Date: Mon Nov 1 14:36:41 2010 -0600
1988 Updated PKGBUILD-git.altos
1990 Signed-off-by: Keith Packard <keithp@keithp.com>
1992 commit b0d31910da592e2f67c47c8fc3e15ce8135d5094
1993 Author: Keith Packard <keithp@keithp.com>
1994 Date: Tue Nov 9 23:34:32 2010 -0800
1996 altosui: Add ascent, descent and landed tabs
1998 This completes the set of tabs for in-flight status information.
2000 Signed-off-by: Keith Packard <keithp@keithp.com>
2002 commit 22d00785188a880700cd372528189a7a15278da9
2003 Author: Keith Packard <keithp@keithp.com>
2004 Date: Tue Nov 9 14:40:58 2010 -0800
2006 altosui: Add tab UI with 'pad' mode.
2008 This creates a multi-tab interface for flight monitoring
2009 and includes a special tab for 'pad' mode.
2011 Signed-off-by: Keith Packard <keithp@keithp.com>
2013 commit eb77e806ded99532dc7eaa39c1893f075b028af6
2014 Author: Keith Packard <keithp@keithp.com>
2015 Date: Tue Nov 9 10:21:34 2010 -0800
2017 altosui: Create abstract interface for flight data display
2019 This allows the implementation of the flight data display to occur in
2020 the flight UI instead of the display thread.
2022 Signed-off-by: Keith Packard <keithp@keithp.com>
2024 commit a0a92c605e238277c9881545a7226e53b5dbc295
2025 Author: Keith Packard <keithp@keithp.com>
2026 Date: Mon Nov 8 22:17:26 2010 -0800
2028 altosui: Fix more calls to AltosPreferences.channel()
2032 Signed-off-by: Keith Packard <keithp@keithp.com>
2034 commit 94f4a50d6430cc8280cbdaa9f39d3cb858d0e077
2035 Author: Keith Packard <keithp@keithp.com>
2036 Date: Mon Nov 8 22:10:46 2010 -0800
2038 altosui: Fix channel setting at serial open time
2040 Was using the previous non-device-specific preferences API.
2042 Signed-off-by: Keith Packard <keithp@keithp.com>
2044 commit 6b17d276271faa8a420a1c8f6be17faaa0c7043c
2045 Author: Keith Packard <keithp@keithp.com>
2046 Date: Mon Nov 8 22:07:04 2010 -0800
2048 altosui: Create buttons for main actions
2050 Signed-off-by: Keith Packard <keithp@keithp.com>
2052 commit 16916be51d746b1e1057b3219e5bec8f8814259e
2053 Author: Keith Packard <keithp@keithp.com>
2054 Date: Fri Nov 5 23:44:47 2010 -0700
2056 altosui: Split out flight monitoring to separate window
2058 This creates a per-TD (or replay) window to contain the flight
2059 monitoring information, allowing multiple monitors.
2061 This also adds per-TD preferences for monitoring channel.
2063 Signed-off-by: Keith Packard <keithp@keithp.com>
2065 commit ca931b1c484bd6b64617370e81b16e169fdae1c2
2066 Author: Bdale Garbee <bdale@gag.com>
2067 Date: Wed Oct 6 17:47:44 2010 -0600
2069 update changelogs for Debian build
2071 commit 811ced628d586134224c1b501b40ce9eb435fc7c
2072 Author: Keith Packard <keithp@keithp.com>
2073 Date: Wed Oct 6 16:42:27 2010 -0700
2075 altosui: Separate out jfreechart and jcommon directories
2077 This allows these packages to be referenced separately
2079 Signed-off-by: Keith Packard <keithp@keithp.com>
2081 commit c2c4d515ef9cc2cae8a8f2803e9498bb0794c4ed
2082 Author: Keith Packard <keithp@keithp.com>
2083 Date: Wed Oct 6 16:25:49 2010 -0700
2085 altosui: Remove ability to graph data in .csv files
2087 There's no reason to support these files when the raw .eeprom or
2088 .telem files which generate them should be used instead.
2090 Signed-off-by: Keith Packard <keithp@keithp.com>
2092 commit d5caf6f2f4d9257e26aa4305b26c02d1b263fa24
2093 Author: Bdale Garbee <bdale@gag.com>
2094 Date: Wed Oct 6 17:14:35 2010 -0600
2096 remove the csv build dep, as that code will be abandoned
2098 commit 43e23a60780191e3c6f61df44c5dd08cc8604c51
2099 Author: Bdale Garbee <bdale@gag.com>
2100 Date: Wed Oct 6 16:27:57 2010 -0600
2102 update changelogs for Debian build
2104 commit 8103432bf7adfe6ee5bf3ee42e1672475e6edd5a
2105 Author: Bdale Garbee <bdale@gag.com>
2106 Date: Wed Oct 6 16:26:33 2010 -0600
2108 update changelogs for Debian build
2110 commit 635066cd35fb24cacf8400a477ea4b4e3dd2c39c
2111 Author: Bdale Garbee <bdale@gag.com>
2112 Date: Wed Oct 6 16:26:19 2010 -0600
2114 update changelogs for Debian build
2116 commit 4396aaaf34cda3751dcca0eceb05b4ffeb411cde
2117 Author: Bdale Garbee <bdale@gag.com>
2118 Date: Wed Oct 6 16:25:22 2010 -0600
2120 add build-dep on libcsv-java
2122 commit 7475ab5804bf3fb12b1b755e850af90d5a15d3eb
2123 Author: Bdale Garbee <bdale@gag.com>
2124 Date: Wed Oct 6 16:19:35 2010 -0600
2126 update changelogs for Debian build
2128 commit d8a2f4ceb1c70a6be976a78e2264c961de2f2277
2129 Author: Bdale Garbee <bdale@gag.com>
2130 Date: Wed Oct 6 16:18:45 2010 -0600
2132 add build dep on jfreechart lib
2134 commit f0d1468ceae065f0cdae6f6ae3323dec5636f073
2135 Author: Keith Packard <keithp@keithp.com>
2136 Date: Tue Sep 28 17:56:49 2010 -0700
2138 altosui: Add KML file export.
2140 Command line has switches now, --kml and --csv
2141 Export save dialog has combo box to select kml or csv result.
2143 Signed-off-by: Keith Packard <keithp@keithp.com>
2145 commit 5a119fd92532d53e552efe1f7c61e87181fcace0
2146 Merge: 28da340 82744c3
2147 Author: Keith Packard <keithp@keithp.com>
2148 Date: Mon Sep 27 22:28:07 2010 -0700
2150 Merge remote branch 'aj/master'
2152 commit 82744c3497d37650b88dee80be7956c4bd1cffb2
2153 Author: Anthony Towns <aj@erisian.com.au>
2154 Date: Tue Sep 28 15:27:07 2010 +1000
2156 Add callsign/serial/flight to graph title
2158 commit 28da3406426437604125d332e4cda90d459df487
2159 Author: Keith Packard <keithp@keithp.com>
2160 Date: Mon Sep 27 22:26:56 2010 -0700
2162 altosui: use Altos constants in graphing code
2164 The Altos class nicely defines constants for all of the flight states.
2166 Signed-off-by: Keith Packard <keithp@keithp.com>
2168 commit ce7f59fbfb5a94a67a4ceced3cc371b4c6b6e5d1
2169 Author: Anthony Towns <aj@erisian.com.au>
2170 Date: Tue Sep 28 14:45:01 2010 +1000
2172 Hax0r graphing to support telem/eeprom files
2174 commit e2b9f47a205348d38756c70e928a2a9183de6884
2175 Merge: 7ef3ad0 8032031
2176 Author: Anthony Towns <aj@erisian.com.au>
2177 Date: Tue Sep 28 12:55:47 2010 +1000
2179 Merge branch 'master' of git://git.gag.com/fw/altos
2181 commit 803203197e51e71e9c77b3610047fd5bf9a56c56
2182 Author: Keith Packard <keithp@keithp.com>
2183 Date: Mon Sep 27 18:52:30 2010 -0700
2185 altosui: Deal with eeprom dates going backwards across wrap
2187 eeprom timestamps can go backwards as the GPS time stamps are
2188 recorded when the first GPS character is received, but not placed into
2189 the eeprom log until the last GPS packet is complete. If this happens
2190 at the same time the tick count is wrapping, then the tick count will
2191 wrap backwards across the 0 boundary causing time to jump forwards.
2193 Fix this by letting time go backwards across the tick boundary, which
2194 requires that we know when the first 'real' tick is read from the
2197 Signed-off-by: Keith Packard <keithp@keithp.com>
2199 commit fe7eba2e4af36cf29d8dc2378ac6985be04f68c6
2200 Author: Keith Packard <keithp@keithp.com>
2201 Date: Mon Sep 27 18:51:05 2010 -0700
2203 altosui: .CSV output: add link quality, gps hdop and sat C/N0 numbers
2205 This makes the CSV files contain all of the available information.
2207 Signed-off-by: Keith Packard <keithp@keithp.com>
2209 commit c89a34d1eb25155405b0036baeadc7bbfeade1c2
2210 Author: Keith Packard <keithp@keithp.com>
2211 Date: Mon Sep 27 17:11:48 2010 -0700
2213 altosui: Create iterables for log file scanning. Split out display threads
2215 Convert from log file reading paradigm to using iterators which is
2216 more idiomatic for java. Split more code out of AltosUI.java,
2217 including the display update threads for telemetry monitoring and
2220 Signed-off-by: Keith Packard <keithp@keithp.com>
2222 commit 7ef3ad0c9354c0484c25badc69334b59c7f355e2
2223 Merge: eb74866 e66919a
2224 Author: Anthony Towns <aj@erisian.com.au>
2225 Date: Fri Sep 24 10:28:06 2010 +1000
2227 Merge branch 'master' of git://git.gag.com/fw/altos
2229 commit e66919aa46193bd8c7a1e86fb32a3367dae121f5
2230 Author: Keith Packard <keithp@keithp.com>
2231 Date: Thu Sep 23 16:52:51 2010 -0700
2233 altosui: Require 4 sats for 'good' GPS data
2235 Wait for 10 consecutive GPS reports with at least 4 sats before
2236 reporting "GPS ready" state.
2238 Signed-off-by: Keith Packard <keithp@keithp.com>
2240 commit 34ca8c00f4be72c314baff4c96f1e2f010948454
2241 Author: Keith Packard <keithp@keithp.com>
2242 Date: Mon Sep 20 06:30:49 2010 -0700
2244 altosui: remove unused ReplayThread wrapper classes
2246 These aren't used now that the replay opener dialog knows how to build
2247 a reader from a filename.
2249 Signed-off-by: Keith Packard <keithp@keithp.com>
2251 commit fd010661ced6075f82a961625826665a3d8d1efe
2252 Author: Keith Packard <keithp@keithp.com>
2253 Date: Mon Aug 30 14:00:04 2010 -0700
2255 altosui: Factor some UI elements into separate classes
2257 Clean up AltosUI by moving the two main tables to separate class files.
2259 Signed-off-by: Keith Packard <keithp@keithp.com>
2261 commit eb74866e919e8c661153847871f5a79e66d37296
2262 Merge: af404b4 1260589
2263 Author: Anthony Towns <aj@erisian.com.au>
2264 Date: Mon Sep 20 22:05:26 2010 +1000
2266 Merge branch 'master' of git://git.gag.com/fw/altos
2268 commit 1260589976c1a95848b298497fd251c4ee7d3f93
2269 Author: Keith Packard <keithp@keithp.com>
2270 Date: Sun Sep 19 02:52:29 2010 -0700
2272 altosui: Write raw sensor data to .csv files
2274 For data export, provide the raw sensor samples instead of the
2277 Signed-off-by: Keith Packard <keithp@keithp.com>
2279 commit 7a4d7110debb88f4e906fee7c46f2badd561809d
2280 Author: Keith Packard <keithp@keithp.com>
2281 Date: Sun Sep 19 02:50:43 2010 -0700
2283 altosui: Use recorded ground acceleration when reading eeprom files
2285 The flight software records 1000 accelerometer samples and records
2286 that in the flight log. Use that value instead of using the very few
2287 samples recorded in the eeprom before boost is detected. This
2288 generates far more accurate accerometer data in the .csv files.
2290 Signed-off-by: Keith Packard <keithp@keithp.com>
2292 commit af404b428bd742039afc25ff3850f76bc92c7c29
2293 Author: Anthony Towns <aj@erisian.com.au>
2294 Date: Wed Sep 15 07:24:04 2010 +1000
2296 Add JFreeChart to Makefile.am
2298 commit 61590b8729831cb138b2ba6b88802c208d114753
2299 Author: Anthony Towns <aj@erisian.com.au>
2300 Date: Wed Sep 15 06:51:05 2010 +1000
2304 commit 3d64f5a6511529ca53699190f4d54de1ba62a9bd
2305 Merge: ec6da08 b9623f8
2306 Author: Anthony Towns <aj@erisian.com.au>
2307 Date: Sat Sep 11 15:15:14 2010 +1000
2309 Merge branch 'master' of git://git.gag.com/fw/altos
2311 commit b9623f8ef26491e9fa14e2478295fe6f5cbbd87f
2312 Author: Keith Packard <keithp@keithp.com>
2313 Date: Fri Sep 10 21:07:14 2010 -0700
2315 altosui: Remember directory containing firmware files
2317 Instead of forcing the user to navigate to the firmware directory each
2318 time, this remembers the previous directory and starts there.
2320 Signed-off-by: Keith Packard <keithp@keithp.com>
2322 commit 7f2204e0832b14b1edca4266a2cbc272141ecc2b
2323 Author: Keith Packard <keithp@keithp.com>
2324 Date: Fri Sep 10 20:55:05 2010 -0700
2326 altosui: set default .csv file name in file save dialog
2328 This uses setSelectedFile to specify which output filename to make the
2329 default in the save dialog.
2331 Signed-off-by: Keith Packard <keithp@keithp.com>
2333 commit 7e053ae1f2d09347123ac9fa79e46645378b4c70
2334 Author: Bdale Garbee <bdale@gag.com>
2335 Date: Fri Sep 10 10:42:35 2010 -0600
2337 make the column headers comma separated, too, so they align with the data
2339 commit ec6da0824474e46de842845d7b53fe1a1dde33ed
2340 Merge: 7c2e411 1031067
2341 Author: Anthony Towns <aj@erisian.com.au>
2342 Date: Fri Sep 10 16:11:34 2010 +1000
2344 Merge branch 'master' of git://git.gag.com/fw/altos
2346 commit 10310672a83a66dc630718b151d653fc066f8e59
2347 Author: Bdale Garbee <bdale@gag.com>
2348 Date: Fri Sep 10 00:09:25 2010 -0600
2350 update changelogs for Debian build
2352 commit 9d0e89e8ad8926dc8371fa809835a580ae49711d
2353 Author: Keith Packard <keithp@keithp.com>
2354 Date: Thu Sep 9 23:04:59 2010 -0700
2356 altosui: Stop parsing eeprom file after hitting 'landed' state
2358 Sometimes there are additional records found in the eeprom file; the
2359 reader is mostly worried about not losing anything, so it reads as
2360 much as it can. However, the last record written for any flight is the
2361 'landed' record, so we can stop looking at the file after hitting that.
2363 Signed-off-by: Keith Packard <keithp@keithp.com>
2365 commit 67b6952f7126704478ede5575e5e938d18fcc329
2366 Author: Keith Packard <keithp@keithp.com>
2367 Date: Thu Sep 9 23:04:14 2010 -0700
2369 altosui: Fill in time value of last Eeprom record read from file
2371 The last record is handled separately, and was missing the code to
2372 compute the time. Sigh.
2374 Signed-off-by: Keith Packard <keithp@keithp.com>
2376 commit 8b0b584cd0ca7542e65aac0c7897ad7ab4115122
2377 Author: Keith Packard <keithp@keithp.com>
2378 Date: Thu Sep 9 22:55:47 2010 -0700
2380 altosui: Remove debug printfs from AltosTelemetryReader
2382 Signed-off-by: Keith Packard <keithp@keithp.com>
2384 commit a80bfae15f1499c49f7ef47978bf0337d8120892
2385 Author: Bdale Garbee <bdale@gag.com>
2386 Date: Thu Sep 9 23:57:34 2010 -0600
2388 rewind packaging changelog, again
2390 commit 78ce3120e5a53858ca0d43c734aa5d28b4948ce3
2391 Author: Bdale Garbee <bdale@gag.com>
2392 Date: Thu Sep 9 23:52:20 2010 -0600
2394 update changelogs for Debian build
2396 commit 71c85613a28c24c3aad7b4aa3299d8677ef1268e
2397 Author: Bdale Garbee <bdale@gag.com>
2398 Date: Thu Sep 9 23:51:23 2010 -0600
2400 rewind packaging changelog
2402 commit 7c2e4114a3a43f919a7a6c967d3f16e5d630f90f
2403 Merge: ddc83b4 af200f5
2404 Author: Anthony Towns <aj@erisian.com.au>
2405 Date: Fri Sep 10 15:50:01 2010 +1000
2407 Merge branch 'master' of git://git.gag.com/fw/altos
2409 commit af200f5b84555de0556b52146379f3934774a3f3
2410 Author: Keith Packard <keithp@keithp.com>
2411 Date: Thu Sep 9 22:30:48 2010 -0700
2413 altosui: Fix telemetry file reader to handle tick count wrapping
2415 The telemetry reader was ignoring tick count wrapping, so you'd see
2416 time go backwards in jumps. Not useful.
2418 Signed-off-by: Keith Packard <keithp@keithp.com>
2420 commit 96ca7051f60ea299e3e05bafbe5717fc83c3afd2
2421 Author: Bdale Garbee <bdale@gag.com>
2422 Date: Thu Sep 9 22:50:03 2010 -0600
2424 update changelogs for Debian build
2426 commit 2d5e48c5dc0e822fdf430f43804c1e5e79fdbf84
2427 Author: Keith Packard <keithp@keithp.com>
2428 Date: Thu Sep 9 21:28:10 2010 -0700
2430 Add --with-fat-dir configure option to publish finished stand-alone bits
2432 --with-fat-dir specifies a directory to copy the finished
2433 linux/macosx/windows stand-alone ("fat") packages to. A sub-directory
2434 will be created under the specified directory based on the product
2435 version number and the files copied there.
2437 Signed-off-by: Keith Packard <keithp@keithp.com>
2439 commit dd2b77b2a516a055f29191dcdfeb727e637aae86
2440 Author: Keith Packard <keithp@keithp.com>
2441 Date: Thu Sep 9 20:59:29 2010 -0700
2443 altosui: libaltos.so is built with libtool -- it's in ../libaltos/.libs
2445 It used to be in ../libaltos
2447 Signed-off-by: Keith Packard <keithp@keithp.com>
2449 commit 72a5c1258db92d0ddd660bfa875e8e55cab47af7
2450 Author: Keith Packard <keithp@keithp.com>
2451 Date: Thu Sep 9 20:39:41 2010 -0700
2453 altosui: Remove some debug printfs.
2455 Signed-off-by: Keith Packard <keithp@keithp.com>
2457 commit 031fd9a954f2e3447d0150eb4ecc81af7b620dca
2458 Author: Keith Packard <keithp@keithp.com>
2459 Date: Thu Sep 9 20:36:12 2010 -0700
2461 Add firmware and libaltos to 'fat' target at top-level
2463 This ensures that all of the necessary bits are available to construct
2464 the distribution images.
2466 Signed-off-by: Keith Packard <keithp@keithp.com>
2468 commit fcaa480b1dfeb2fd4044f9c4e1b6d50c46fc9984
2469 Author: Bdale Garbee <bdale@gag.com>
2470 Date: Thu Sep 9 21:29:20 2010 -0600
2472 update changelogs for Debian build
2474 commit 48f57997452e17564e28fe3e37403f6f63d32dea
2475 Author: Keith Packard <keithp@keithp.com>
2476 Date: Thu Sep 9 20:24:42 2010 -0700
2478 altosui: conflating USB product and vendor IDs is a bad idea
2480 We've now got a USB vendor ID called 'altusmetrum' for generic
2481 altusmetrum devices (old USB ID 0x000A) while the general vendor name
2482 for all devices is 'altusmetrum' as well.
2484 This patch splits vendors and products into separate name spaces,
2485 products are prefixed with product_ and vendor with (oddly) vendor_.
2487 Signed-off-by: Keith Packard <keithp@keithp.com>
2489 commit 632d276118ab04de67561104be650f8fb69a0450
2490 Author: Bdale Garbee <bdale@gag.com>
2491 Date: Thu Sep 9 20:34:43 2010 -0600
2493 update changelogs for Debian build
2495 commit 1ac3d7e3ba52d1b0dc834eaa5d7886c730eaf307
2496 Author: Bdale Garbee <bdale@gag.com>
2497 Date: Thu Sep 9 20:34:22 2010 -0600
2499 initial cut at an altosui man page
2501 commit 5c4e437975054d33604402591e1ea2f314932593
2502 Author: Bdale Garbee <bdale@gag.com>
2503 Date: Thu Sep 9 20:06:09 2010 -0600
2505 update changelogs for Debian build
2507 commit 0ea75761416bff299233991e961ba25b6c7dcf89
2508 Merge: 35d70c9 8ee3464
2509 Author: Bdale Garbee <bdale@gag.com>
2510 Date: Thu Sep 9 20:05:27 2010 -0600
2512 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
2514 commit 8ee3464d8064ebe1694c7b20177878c0d9961451
2515 Author: Keith Packard <keithp@keithp.com>
2516 Date: Thu Sep 9 17:54:41 2010 -0700
2518 altosui: Display error dialog when AltOS JNI library can't be loaded
2520 Having an error dialog appear at application startup seems better than
2521 simply failing to present the device dialog later on.
2523 Signed-off-by: Keith Packard <keithp@keithp.com>
2525 commit 4224a7526e51eb8fbf1f0a31bae7ee68c6385095
2526 Author: Keith Packard <keithp@keithp.com>
2527 Date: Thu Sep 9 17:52:46 2010 -0700
2529 altosui: Store libaltos.so in $(libdir)/altos
2531 It's not a public library, so hide it away in a subdirectory.
2533 Signed-off-by: Keith Packard <keithp@keithp.com>
2535 commit 1e4c18777d982061f5e507a4d4f4f1cd4d685268
2536 Author: Keith Packard <keithp@keithp.com>
2537 Date: Thu Sep 9 17:49:37 2010 -0700
2539 altosui: Need to have JVM include path substituted into libaltos Makefile
2541 The libaltos Makefile needs to find the relevant jni.h file, which is
2542 found in the JVM_INCLUDE path, all nicely located by the configure.ac script.
2544 Signed-off-by: Keith Packard <keithp@keithp.com>
2546 commit 35d70c92307dd478bc619b2f6c5a88e155cdad28
2547 Author: Bdale Garbee <bdale@gag.com>
2548 Date: Thu Sep 9 17:27:07 2010 -0600
2550 handle versioning of ihx files (poorly) by just wildcarding the file name,
2551 which assumes there's only one matching .. probably ok on Debian?
2553 commit c286ada6457579d64e9d8ca44b927258b4a561da
2554 Author: Bdale Garbee <bdale@gag.com>
2555 Date: Thu Sep 9 16:27:40 2010 -0600
2557 update changelogs for Debian build
2559 commit 6c0ae7e966a81ece35bccbe89d626a58afe899a2
2560 Author: Keith Packard <keithp@keithp.com>
2561 Date: Thu Sep 9 15:25:18 2010 -0700
2563 altosui: remove FATJAR from all-local to avoid building fat .jar file
2565 the fat .jar file is used in non-native builds to run from a directory
2566 containing all of the freetts jar files along with the altosui jar
2567 file. We don't want this on a real install where freetts is installed separately.
2569 Signed-off-by: Keith Packard <keithp@keithp.com>
2571 commit 737a64c57a8f979f51c3fa6b3f214520c736cf8a
2572 Author: Keith Packard <keithp@keithp.com>
2573 Date: Thu Sep 9 15:22:14 2010 -0700
2575 altosui: hack to make JAVAROOT directory get created before javac runs
2577 This ensures that the JAVAROOT directory gets created by adding it to
2578 the variable used to set the CLASSPATH environment value.
2580 Signed-off-by: Keith Packard <keithp@keithp.com>
2582 commit b456bd9d7bcd9d968e43c38eeb6fa6ad8c58f895
2583 Author: Keith Packard <keithp@keithp.com>
2584 Date: Thu Sep 9 15:11:41 2010 -0700
2586 altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and ia64
2588 This appears to matter to Vista. Dunno why.
2590 Signed-off-by: Keith Packard <keithp@keithp.com>
2592 commit 16980b848651a6b20a0b458446f0a19fb517539d
2593 Author: Keith Packard <keithp@keithp.com>
2594 Date: Thu Sep 9 15:10:25 2010 -0700
2596 altosui: Add explicit requirement to create classes directory
2598 The implicit ordering doesn't appear reliable.
2600 Signed-off-by: Keith Packard <keithp@keithp.com>
2602 commit 15da683c2f747baef49c8b8d321a86faede0de30
2603 Author: Bdale Garbee <bdale@gag.com>
2604 Date: Thu Sep 9 15:51:50 2010 -0600
2606 update changelogs for Debian build
2608 commit 012e7176954a6b74b3b667317be0f6dc41d7ab70
2609 Author: Bdale Garbee <bdale@gag.com>
2610 Date: Thu Sep 9 15:51:02 2010 -0600
2612 add libtool to build deps
2614 commit 3e5824b9a71971ce99bfe38a1e860b421e265f02
2615 Author: Bdale Garbee <bdale@gag.com>
2616 Date: Thu Sep 9 15:43:47 2010 -0600
2618 update changelogs for Debian build
2620 commit ddc83b4c401be965a9947782becf20cc8c54e6a2
2621 Merge: afea6c2 3d49d5f
2622 Author: Anthony Towns <aj@erisian.com.au>
2623 Date: Sun Sep 5 20:49:34 2010 +1000
2625 Merge branch 'master' of git://git.gag.com/fw/altos
2627 commit 3d49d5f69b41c27003dbc5ccf1899014bd13bd99
2628 Author: Keith Packard <keithp@keithp.com>
2629 Date: Sun Sep 5 02:05:06 2010 -0700
2631 altosui: ensure that 'altosui' script is installed. Pass arguments along.
2633 Signed-off-by: Keith Packard <keithp@keithp.com>
2635 commit b61fec225ada6a9e252e4c7920101ee18c77cbdc
2636 Author: Keith Packard <keithp@keithp.com>
2637 Date: Sun Sep 5 01:55:56 2010 -0700
2639 altosui: eeprom files place 'boost' time in the flight number record.
2641 Instead of looking for the first state change record, use the Flight
2642 record to get the boost tick.
2644 Signed-off-by: Keith Packard <keithp@keithp.com>
2646 commit 6c653a4cba5fef8d49261cf1c024f3e86e9058c6
2647 Author: Keith Packard <keithp@keithp.com>
2648 Date: Sun Sep 5 01:52:36 2010 -0700
2650 altosui: Record flight number when scanning file, not when running
2652 The very first record in the eeprom is the flight number, but it is
2653 time-stamped with the 'boost' time, and so it gets sorted until much
2654 later, delaying the return of data until the rocket enters boost
2655 mode. This drops all of the nice pad GPS and state date on the floor.
2657 Signed-off-by: Keith Packard <keithp@keithp.com>
2659 commit 38e1d87c8d449866faac026577fefa9a118428cb
2660 Author: Keith Packard <keithp@keithp.com>
2661 Date: Sun Sep 5 01:23:53 2010 -0700
2663 altosui: Use local .class files in the classpath
2665 This ensures that compiling only a few changed files will
2666 locate the old .class files instead of using a stale .jar file.
2668 commit 9941b05a1d03dafd6cd899b5fe999ed769efb1d6
2669 Author: Keith Packard <keithp@keithp.com>
2670 Date: Sun Sep 5 01:21:14 2010 -0700
2672 altosui: Prevent voice altitude data from queueing up
2674 When flight status changes rapidly, the queue of voice data can get
2675 quite long. This change does two things -- first, it remembers when
2676 the altitude reporting happens due to flight events and delays the
2677 periodic reporting until a suitable time after that, second it ensures
2678 that the voice data has all been delivered before generating a new
2681 Signed-off-by: Keith Packard <keithp@keithp.com>
2683 commit 4dec5c36702d76dc95beada7c1d3222a638a2cbb
2684 Author: Keith Packard <keithp@keithp.com>
2685 Date: Sun Sep 5 01:19:11 2010 -0700
2687 altosui: Add AltosVoice.drain() to wait for queued speech to finish
2689 drain() blocks until all pending phrases have been processed, allowing
2690 the UI code to avoid pending data that will end up stale by the time
2693 Signed-off-by: Keith Packard <keithp@keithp.com>
2695 commit 410ba89eef9c9817eef81b702966cb88820ff7c4
2696 Author: Keith Packard <keithp@keithp.com>
2697 Date: Sun Sep 5 01:13:01 2010 -0700
2699 altosui: Start idle thread after the rocket leaves the pad
2701 This makes the first altitude report time consistently 10 seconds
2702 after launch, instead of some random time depending on when the rocket
2703 launched relative to the time the device connection was made.
2705 Signed-off-by: Keith Packard <keithp@keithp.com>
2707 commit 6205547ec7191aab0259a8449520e966a96129e6
2708 Author: Keith Packard <keithp@keithp.com>
2709 Date: Sun Sep 5 01:08:50 2010 -0700
2711 altosui: When replay thread is interrupted, don't make final report
2713 Normally, the replay process makes one final report after the file has
2714 been parsed. However, if the reading process is interrupted to display
2715 something else, this report is just annoying, so don't make it.
2717 Signed-off-by: Keith Packard <keithp@keithp.com>
2719 commit 3d99584fcfe43b22e8581874e0ac77ce3d635d48
2720 Author: Keith Packard <keithp@keithp.com>
2721 Date: Sun Sep 5 01:03:18 2010 -0700
2723 altosui: Add elevation and range data to main display
2725 Reported by voice, it's useful to see these on the display as well.
2727 Signed-off-by: Keith Packard <keithp@keithp.com>
2729 commit 2d58f319a7c1a6a8ccc6a539722009996ba886ab
2730 Author: Keith Packard <keithp@keithp.com>
2731 Date: Sun Sep 5 01:01:10 2010 -0700
2733 altosui: Eeprom files contain only one date; save it.
2735 While reading eeprom files, the GPS record is reconstructed each time
2736 the system sees the first GPS log item (the time field), but as the
2737 date isn't repeated, we need to copy it from the old GPS data record.
2739 Signed-off-by: Keith Packard <keithp@keithp.com>
2741 commit b2aa689bf3d61e4a3ebe7c828162d1be20aad0f6
2742 Author: Keith Packard <keithp@keithp.com>
2743 Date: Sun Sep 5 00:59:54 2010 -0700
2745 altosui: Remove debugging printf from AltosEepromReader
2747 These were in place while validing the GPS data reconstruction code
2748 that handles eeprom files missing the first GPS date line due to the
2749 record overwriting bug in old firmware versions.
2751 Signed-off-by: Keith Packard <keithp@keithp.com>
2753 commit eb0e7a59f0806734a4c959a3ce7c57f71cbe3986
2754 Author: Keith Packard <keithp@keithp.com>
2755 Date: Sun Sep 5 00:57:38 2010 -0700
2757 altosui: Return AO_LOG_INVALID instead of exception for eeprom files
2759 When an eeprom file contains an invalid line, just return
2760 AO_LOG_INVALID instead of throwing an exception. This allows us to
2761 replay and parse files with extraneous serial communication.
2763 Signed-off-by: Keith Packard <keithp@keithp.com>
2765 commit c3a17c71a45207dd715d537704f161de9219f0d7
2766 Author: Keith Packard <keithp@keithp.com>
2767 Date: Sat Sep 4 18:49:22 2010 -0700
2769 altosui: Fix linux fat distribution
2771 Again, use 'cp -p' instead of 'cp -a' to get files into the archive
2772 instead of links. Also, make the shell script 'altosui' instead of
2775 Signed-off-by: Keith Packard <keithp@keithp.com>
2777 commit 828e9e4c68e3ac90b6ba2e9fd5f131a9975f7e4a
2778 Author: Keith Packard <keithp@keithp.com>
2779 Date: Sat Sep 4 18:39:58 2010 -0700
2781 altosui: Fix up Mac OSX .zip file
2783 Must contain 'altosui.jar' instead of altosui-fat.jar.
2784 Also, was using 'cp -a' instead of 'cp -p' which made files
2785 represented by symlinks not end up in the archive.
2787 Signed-off-by: Keith Packard <keithp@keithp.com>
2789 commit 044fd27449c70474f51b99dec25fd23d3c03a559
2790 Author: Keith Packard <keithp@keithp.com>
2791 Date: Sat Sep 4 18:20:45 2010 -0700
2793 altosui: Fix windows installer to ship correct files
2795 Was shipping altosui.jar instead of altosui-fat.jar
2797 Signed-off-by: Keith Packard <keithp@keithp.com>
2799 commit 148b927c3b8bc7b7b5c5356392032faf2b1203d3
2800 Author: Keith Packard <keithp@keithp.com>
2801 Date: Sat Sep 4 18:04:04 2010 -0700
2803 Add top-level 'fat' target to aid building distribution files
2805 Signed-off-by: Keith Packard <keithp@keithp.com>
2807 commit aed59e1c057c13e28fd368dc2592aa4628211097
2808 Author: Keith Packard <keithp@keithp.com>
2809 Date: Sat Sep 4 17:59:11 2010 -0700
2811 Add version numbers to released files. Set version to 0.7.1
2813 Instead of using git revision counts for version numbers, use explicit
2814 versions numbers configured in the configure.ac file. Expose published
2815 files with version numbers.
2817 Signed-off-by: Keith Packard <keithp@keithp.com>
2819 commit 2808bba3efa1cff133cc060dabff06fab8b75388
2820 Author: Keith Packard <keithp@keithp.com>
2821 Date: Sat Sep 4 17:58:52 2010 -0700
2823 Ignore libtool files.
2825 commit bc183400ab93d5902c52851319999cc77f27bc81
2826 Author: Keith Packard <keithp@keithp.com>
2827 Date: Sat Sep 4 17:35:17 2010 -0700
2829 altos: add some SDCDB config files
2831 commit 887b11f6b9c81b9f15348d54017e700ca7dc5e55
2832 Author: Keith Packard <keithp@keithp.com>
2833 Date: Sat Sep 4 17:27:17 2010 -0700
2835 Use autotools for altosui and libaltos
2837 This switches from hand-written Makefiles to automake with libtool
2838 for these parts of the system.
2840 Signed-off-by: Keith Packard <keithp@keithp.com>
2842 commit e844e8a0695e27af6f8e3e37a5e3bcc865b862e3
2843 Author: Keith Packard <keithp@keithp.com>
2844 Date: Sat Sep 4 01:13:42 2010 -0700
2846 altosui: Add icons to application and Windows menus.
2848 Use the altus-metrum icon for an application icon and a windows start
2851 Signed-off-by: Keith Packard <keithp@keithp.com>
2853 commit e9ea28504c646fc25791aab09b9e5faf73e0ac0c
2854 Author: Keith Packard <keithp@keithp.com>
2855 Date: Sat Sep 4 01:08:34 2010 -0700
2857 icon: add some icons for application programs
2859 altus-metrum.ico: Windows ICO file
2860 altus-metrum-16x16.jpg: 16x16 jpg image for java
2862 Signed-off-by: Keith Packard <keithp@keithp.com>
2864 commit f550677df016070430ed38bfa2b2be33f1b8c40a
2865 Author: Keith Packard <keithp@keithp.com>
2866 Date: Sat Sep 4 00:16:41 2010 -0700
2868 altosui: oops. renamed the nsis file to altos-windows.nsi
2870 And forgot to change the dependency in the Makefile
2872 Signed-off-by: Keith Packard <keithp@keithp.com>
2874 commit c0988ddbf104ea729090c2e7e2a28cc6dc9e90f6
2875 Author: Keith Packard <keithp@keithp.com>
2876 Date: Sat Sep 4 00:14:15 2010 -0700
2878 altosui: ignore built files
2880 commit ecb4a09535b6a8da0765010489a96e605dbdeb46
2881 Author: Keith Packard <keithp@keithp.com>
2882 Date: Sat Sep 4 00:13:11 2010 -0700
2884 altosui: Add windows installer build using 'nsis'
2886 nsis happens to be packaged in debian, and it appears to build usable
2887 installers, which is all very cool.
2889 Signed-off-by: Keith Packard <keithp@keithp.com>
2891 commit bf22923cd8b4f6f954718358b411b5b10d8e7b4d
2892 Author: Bdale Garbee <bdale@gag.com>
2893 Date: Sat Sep 4 00:46:29 2010 -0400
2895 update changelogs for Debian build
2897 commit 59798c6fd11502a9c8b66090c23ba50eb250692e
2898 Author: Keith Packard <keithp@keithp.com>
2899 Date: Fri Sep 3 12:43:45 2010 -0700
2901 altosui: Catch I/O errors on telemetry device, report to user
2903 This catches the USB device being unplugged and makes sure the
2904 user sees an error dialog in this case.
2906 Signed-off-by: Keith Packard <keithp@keithp.com>
2908 commit 16d8d6a8853d09f683b13f9cda3c3174a0aab130
2909 Author: Keith Packard <keithp@keithp.com>
2910 Date: Fri Sep 3 12:31:05 2010 -0700
2912 altosui: Must flush serial line after configuring for telemetry
2914 Without flushing the configuration commands to the serial device, it
2915 never sees them as the telemetry input thread doesn't flush.
2917 Signed-off-by: Keith Packard <keithp@keithp.com>
2919 commit d4f64e95e31e2335470efc15df2ab357b7d197f3
2920 Author: Keith Packard <keithp@keithp.com>
2921 Date: Fri Sep 3 11:48:55 2010 -0700
2923 Revert "altosui: Deal with altos bug setting radio channel while monitoring"
2925 This reverts commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f.
2927 Testing the old code
2929 commit 71191ecef3ba0e00d0f8a7cd1a24982bfa44ec72
2930 Author: Keith Packard <keithp@keithp.com>
2931 Date: Fri Sep 3 01:30:33 2010 -0700
2933 altosui: Allow 'connect to device' when already connected
2935 Opening another serial device involves shutting down the display
2936 thread (to reset its state) and spawning another one. Shutting down
2937 the display thread normally closes the serial device as a part of the
2938 process, and if this isn't done before the new serial device is
2939 opened, then the new serial device ends up getting closed too.
2941 Interrupting the display thread and waiting for it to stop before
2942 opening the new serial device solves the problem.
2944 Signed-off-by: Keith Packard <keithp@keithp.com>
2946 commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f
2947 Author: Keith Packard <keithp@keithp.com>
2948 Date: Fri Sep 3 01:21:57 2010 -0700
2950 altosui: Deal with altos bug setting radio channel while monitoring
2952 If the monitoring thread is active, then setting the radio channel can
2953 sometimes cause the monitoring thread to get stuck. I'm not entirely
2954 sure why though. For now, work around the issue by making sure
2955 monitoring is off, and the monitoring thread has stopped, before
2956 changing the radio channel.
2958 Signed-off-by: Keith Packard <keithp@keithp.com>
2960 commit e5ef42c2b22c6639d90631dbbb588f9fd2494385
2961 Author: Keith Packard <keithp@keithp.com>
2962 Date: Fri Sep 3 01:12:24 2010 -0700
2964 altosui: Report telemetry CRC errors in UI
2966 Telemetry CRC errors can signal problems with TeleMetrum or TeleDongle
2967 units, so report them in the UI.
2969 Signed-off-by: Keith Packard <keithp@keithp.com>
2971 commit 3b3aa448f3a0f44137f7530b04b58967ba5f22f5
2972 Author: Keith Packard <keithp@keithp.com>
2973 Date: Thu Sep 2 21:11:29 2010 -0700
2975 altosui: build Mac OS .zip file to include paths
2977 Without the paths, the OS X zip file doesn't create a usable
2978 application structure.
2980 Signed-off-by: Keith Packard <keithp@keithp.com>
2982 commit cff0d1ef6b338b3d5ad9450d4d5f95df934cb5e4
2983 Author: Keith Packard <keithp@keithp.com>
2984 Date: Wed Sep 1 22:56:34 2010 -0700
2986 altosui: Post error dialog on invalid ROM config values.
2988 Signed-off-by: Keith Packard <keithp@keithp.com>
2990 commit 8d8980f56a4f2c7d6f2ce667130706e0f04f8ded
2991 Author: Keith Packard <keithp@keithp.com>
2992 Date: Wed Sep 1 22:56:12 2010 -0700
2994 altosui: Remove some debug printfs from AltosRomconfig class
2996 Signed-off-by: Keith Packard <keithp@keithp.com>
2998 commit 5ee6cd41ed189c3166f76558ecada80917f40652
2999 Author: Keith Packard <keithp@keithp.com>
3000 Date: Wed Sep 1 22:47:15 2010 -0700
3002 altosui: Hide internal rom config UI helper function
3004 This was getting mis-used by the flash UI causing the rom dialog
3005 'cancel' button to work just like 'ok'.
3007 Signed-off-by: Keith Packard <keithp@keithp.com>
3009 commit 9a690c9795e8257d2a3225f905117681668a472f
3010 Author: Keith Packard <keithp@keithp.com>
3011 Date: Wed Sep 1 22:46:04 2010 -0700
3013 altosui: allow flashing to be canceled from the rom config dialog
3015 Was using the rom config class wrong, causing cancel actions to work
3016 just like 'ok' actions. Oops.
3018 Signed-off-by: Keith Packard <keithp@keithp.com>
3020 commit 2f07ad14a16dbf1b75c71784ceae303825c90ade
3021 Author: Keith Packard <keithp@keithp.com>
3022 Date: Wed Sep 1 22:43:22 2010 -0700
3024 altosui: Abort flashing if debug port isn't working
3026 Check each command going over the debug port and make sure it works as
3027 expected. This commit adds checks for initializing the clock,
3028 selecting the desired program counter and running the flash
3031 Signed-off-by: Keith Packard <keithp@keithp.com>
3033 commit cf30343aadd5039627a85319872685f743e64b16
3034 Author: Bdale Garbee <bdale@gag.com>
3035 Date: Thu Sep 2 00:55:41 2010 -0400
3037 update changelogs for Debian build
3039 commit 59a40f6d5a2159b9009a3fa0737bb679efd5b32c
3040 Author: Bdale Garbee <bdale@gag.com>
3041 Date: Thu Sep 2 00:55:01 2010 -0400
3043 another distclean fix
3045 commit 59ff9180f11063c257746b895a167179b3a4ff7c
3046 Author: Bdale Garbee <bdale@gag.com>
3047 Date: Thu Sep 2 00:53:16 2010 -0400
3049 and a few more distclean fixes
3051 commit 3aafd70257b70b7c11ba9c55749157979bc61ea2
3052 Author: Bdale Garbee <bdale@gag.com>
3053 Date: Thu Sep 2 00:52:04 2010 -0400
3055 more makefile distclean target work
3057 commit d5a6ad87c7a9ac03b2e694bed0a54b6cc4322a6f
3058 Author: Bdale Garbee <bdale@gag.com>
3059 Date: Thu Sep 2 00:50:16 2010 -0400
3061 update changelogs for Debian build
3063 commit 14fa24ed93b3b1cec08a170004c6fb7f4d74f7e5
3064 Author: Bdale Garbee <bdale@gag.com>
3065 Date: Thu Sep 2 00:48:31 2010 -0400
3067 update changelogs for Debian build
3069 commit 83552dfa0d38db9cdf3efc89e64e6c7896467856
3070 Author: Bdale Garbee <bdale@gag.com>
3071 Date: Thu Sep 2 00:47:54 2010 -0400
3073 add distclean targets to libaltos and altosui to all Debian package to build
3075 commit 6f24d2a476759104a10b26b54faff2b18b0e208b
3076 Author: Bdale Garbee <bdale@gag.com>
3077 Date: Thu Sep 2 00:46:21 2010 -0400
3079 update changelogs for Debian build
3081 commit d079bfe86ed40ff450ece445cf5f5e3970e44cec
3082 Author: Bdale Garbee <bdale@gag.com>
3083 Date: Thu Sep 2 00:44:30 2010 -0400
3085 update changelogs for Debian build
3087 commit a470315e5d822a69ef5304512cf73c604c88e481
3088 Author: Keith Packard <keithp@keithp.com>
3089 Date: Wed Sep 1 20:14:51 2010 -0700
3091 altosui: Remove Manifest.txt from git repo as it's built now
3093 This file is built with appropriate contents for each different .jar file.
3095 Signed-off-by: Keith Packard <keithp@keithp.com>
3097 commit 1177e0a684328422be5adc68093d0091a218a824
3098 Author: Keith Packard <keithp@keithp.com>
3099 Date: Wed Sep 1 19:53:24 2010 -0700
3101 altos: Bounds check Skytraq GPS tracking data array
3103 Missing GPS serial data could cause the tracking array reset to
3104 get skipped, causing the array to be overrun, smashing critical data
3107 This was detected using the 'altosui' flash command to program a
3108 device from TM. Hitting the USB that hard caused TM to crash with a
3109 mutex error (3 beeps) after the ao_gps_task structure was overwritten
3112 Signed-off-by: Keith Packard <keithp@keithp.com>
3114 commit 775acb89660cdee2f3c54c38297baefe39f2414c
3115 Author: Keith Packard <keithp@keithp.com>
3116 Date: Mon Aug 30 22:24:09 2010 -0700
3118 altosui: missed AltosReader.class in the Makefile
3120 This caused clean builds to fail to make this file
3122 Signed-off-by: Keith Packard <keithp@keithp.com>
3124 commit bd2b9d958c2b7f846031b076ed51c4fbaaf2d68f
3125 Author: Bdale Garbee <bdale@gag.com>
3126 Date: Tue Aug 31 00:20:06 2010 -0400
3128 update changelogs for Debian build
3130 commit d006c5e1255433181aca4c8e6a277b2d1bc0841b
3131 Author: Bdale Garbee <bdale@gag.com>
3132 Date: Tue Aug 31 00:19:37 2010 -0400
3134 add runtime dependencies for altos binary package
3136 commit c1c7d731e3774883fa0bb5538be225a59334d124
3137 Author: Bdale Garbee <bdale@gag.com>
3138 Date: Mon Aug 30 19:52:51 2010 -0600
3140 update changelogs for Debian build
3142 commit c35632efb1919764e4b8581ed6fcf2bedd4bd517
3143 Author: Bdale Garbee <bdale@gag.com>
3144 Date: Mon Aug 30 19:37:50 2010 -0600
3146 update changelogs for Debian build
3148 commit 2a004d17a13b4ff52d892bfdecff8ad3d0823f7c
3149 Author: Bdale Garbee <bdale@gag.com>
3150 Date: Mon Aug 30 19:37:17 2010 -0600
3152 don't build all the "fat" jar deliverables by default
3154 commit 507e429db6638f82c32449e9c5ca06b46da30134
3155 Author: Bdale Garbee <bdale@gag.com>
3156 Date: Mon Aug 30 19:09:00 2010 -0600
3158 update changelogs for Debian build
3160 commit 25764fcd1b65c3a5a817afdb5901ac30e8a5f0c0
3161 Author: Bdale Garbee <bdale@gag.com>
3162 Date: Mon Aug 30 19:08:29 2010 -0600
3164 update changelogs for Debian build
3166 commit 4790f78aead8a816e5b247c022b2998ce3a94053
3167 Author: Bdale Garbee <bdale@gag.com>
3168 Date: Mon Aug 30 18:48:50 2010 -0600
3170 add a .gitattributes file, configuring the Mac and Windows binary library
3171 files with the export-ignore attribute, in hopes that this will prevent
3172 them showing up in source packages
3174 commit 81318e5b7179b0311ab099043ecb04a25d763750
3175 Author: Bdale Garbee <bdale@gag.com>
3176 Date: Mon Aug 30 18:15:40 2010 -0600
3178 make invocation of 'install' pathless to work on more Unix variants
3180 commit cbc72399a0f4d7429df0189bcdae683dd491cb9e
3181 Author: Bdale Garbee <bdale@gag.com>
3182 Date: Mon Aug 30 17:56:56 2010 -0600
3184 continue even if rm's don't have anything to do
3186 commit a9a8d23c877e6f6c76857b7c85e3d43b4da1db27
3187 Author: Keith Packard <keithp@keithp.com>
3188 Date: Mon Aug 30 05:49:11 2010 -0700
3190 altosui: Devices with USB id 0x000a always get listed
3192 List 'unknown' AltusMetrum devices anytime the UI needs a device
3195 Signed-off-by: Keith Packard <keithp@keithp.com>
3197 commit a94900b8862b99b4e317ea0ee3edd2a560f270c7
3198 Author: Keith Packard <keithp@keithp.com>
3199 Date: Mon Aug 30 05:48:23 2010 -0700
3201 altosui: build debian-style altosui too
3203 This adds the dependencies to make sure altosui and altosui.jar get built.
3205 Signed-off-by: Keith Packard <keithp@keithp.com>
3207 commit 38ac388baf8125c0644b868a7aaf8eba1bdf990d
3208 Author: Keith Packard <keithp@keithp.com>
3209 Date: Mon Aug 30 05:28:37 2010 -0700
3211 altosui: Build linux, mac and windows archives on Linux
3213 This adds 'fat' archives for each target OS.
3215 Signed-off-by: Keith Packard <keithp@keithp.com>
3217 commit 35d9a8214252dbe79aeb69ae47d2e5c58a654702
3218 Author: Keith Packard <keithp@keithp.com>
3219 Date: Mon Aug 30 05:27:45 2010 -0700
3221 libaltos: Use overlapped I/O on windows
3223 Otherwise, reads block writes and vice-versa. Crazy stuff.
3225 Signed-off-by: Keith Packard <keithp@keithp.com>
3227 commit c7ba92317ac55272acbde12416448ebd17b983a6
3228 Author: Keith Packard <keithp@keithp.com>
3229 Date: Mon Aug 30 04:52:00 2010 -0700
3231 altos: Windows sends USB Out packets of 0 length. Ack them.
3233 This was an untested case as no other operating system sents 0-length
3234 out packets (they're not necessary). The correct response is to ACK
3235 them by clearing the OUTPKT_RDY bit so that another packet can be sent.
3237 Signed-off-by: Keith Packard <keithp@keithp.com>
3239 commit 20a472cfe3369200150ea4ff067ceb28968dbcac
3240 Author: Keith Packard <keithp@keithp.com>
3241 Date: Mon Aug 30 02:58:23 2010 -0700
3243 libaltos: Add pre-built Windows .dll
3245 This lets us create the windows distribution on Linux.
3247 Signed-off-by: Keith Packard <keithp@keithp.com>
3249 commit 0300fe581c949232bc52b05fe9c1f6032cad6b60
3250 Author: Keith Packard <keithp@keithp.com>
3251 Date: Mon Aug 30 02:56:25 2010 -0700
3253 libaltos: Add pre-built Mac OS X libaltos.dylib
3255 This allows the mac bits to be built on Linux.
3257 Signed-off-by: Keith Packard <keithp@keithp.com>
3259 commit 5d48c494325524bbeed10e0dc7300ed44e7e208e
3260 Author: Keith Packard <keithp@keithp.com>
3261 Date: Mon Aug 30 02:53:26 2010 -0700
3263 Update telemetrum.inf to include all current USB ids.
3265 Windows 7 has 'encouraged' us to split out each product into a
3266 separate USB ID. telemetrum.inf now has all of them listed.
3268 Signed-off-by: Keith Packard <keithp@keithp.com>
3270 commit df34bbe7d1c43b12ab6d610fe810b6e1683e4c21
3271 Author: Keith Packard <keithp@keithp.com>
3272 Date: Mon Aug 30 02:49:49 2010 -0700
3274 libaltos: Improve Makefile
3276 Builds Windows .dll correctly now and sample app.
3277 Moves linux install target to end so it is not default
3278 Adds .NOTPARALLEL to disable parallel gnumake.
3279 Removes -g debugging flags to shrink file size.
3281 Signed-off-by: Keith Packard <keithp@keithp.com>
3283 commit dd5374b8e660012ae4f8b058454fd101e0749ca7
3284 Author: Keith Packard <keithp@keithp.com>
3285 Date: Mon Aug 30 02:00:30 2010 -0700
3287 libaltos: Fix windows build.
3289 Need stdlib.h to get calloc/free defined, remove debug printfs, fix
3292 Signed-off-by: Keith Packard <keithp@keithp.com>
3294 commit 63c832394a829f41b8f77d075786530536360349
3295 Author: Keith Packard <keithp@keithp.com>
3296 Date: Sun Aug 29 23:22:27 2010 -0700
3298 altos: shut down packet mode cleanly
3300 Instead of constantly bashing the packet master thread, let it shut
3301 itself down in an orderly fashion. It will shut down fairly quickly as
3302 all of the activities in that thread are bounded. Otherwise, the
3303 master packet thread might leave mutexes locked and all sorts of other
3306 Tested on Linux and Mac OS X and shown to be reliable.
3308 Signed-off-by: Keith Packard <keithp@keithp.com>
3310 commit 43619c13f749b79c096d1e8fdab3d5cfb5fd85f1
3311 Author: Keith Packard <keithp@keithp.com>
3312 Date: Sun Aug 29 22:42:23 2010 -0700
3314 altos: Abort radio harder when terminating packet mode.
3316 Make sure the master radio tasks don't get stuck waiting for an
3317 incoming packet again by aborting the radio each time we poke the
3320 Signed-off-by: Keith Packard <keithp@keithp.com>
3322 commit c4a8569f61eddf690d00337543462235ecbfbe54
3323 Author: Keith Packard <keithp@keithp.com>
3324 Date: Sun Aug 29 22:41:18 2010 -0700
3326 altos: flush pending output when terminating packet mode
3328 Just in case the last command sent hasn't been transmitted, hang
3329 around for up to a second waiting for the data to get across the link.
3331 Signed-off-by: Keith Packard <keithp@keithp.com>
3333 commit 1acd3c7ec167b1b18e4ea493e5978c938a91cc89
3334 Author: Keith Packard <keithp@keithp.com>
3335 Date: Sun Aug 29 21:45:19 2010 -0700
3337 libaltos: cjnitest needs altos_flush now
3339 commit 6527357d1f0e94faf9e7dacac10a39875131be7c
3340 Author: Keith Packard <keithp@keithp.com>
3341 Date: Sun Aug 29 21:43:46 2010 -0700
3343 libaltos: Missing OS_LDFLAGS on cjnitest build
3345 commit b7fa1ea3338f63b8edcf8aacccb5e519ca0b213f
3346 Author: Keith Packard <keithp@keithp.com>
3347 Date: Sun Aug 29 21:41:40 2010 -0700
3349 libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
3351 Who ships this stuff, anyway? Instead of blocking, we'll poll every 100ms now,
3352 otherwise, we won't be able to abort the read when the device is closed. Yay!
3354 Signed-off-by: Keith Packard <keithp@keithp.com>
3356 commit e60c59123232915e808cee23ef89eb1a38ced34b
3357 Author: Keith Packard <keithp@keithp.com>
3358 Date: Sun Aug 29 21:40:21 2010 -0700
3360 altosui: discard invalid lines while reading Eeprom flight data
3362 This shouldn't happen, but it's easy enough to get back in sync by just
3363 skipping lines with weird contents.
3365 Signed-off-by: Keith Packard <keithp@keithp.com>
3367 commit ae02b1590439d5c8dfb472cf1f83a14fdcfbaf11
3368 Author: Keith Packard <keithp@keithp.com>
3369 Date: Sun Aug 29 21:36:47 2010 -0700
3371 altosui: provide separate flush_input/flush_output for serial. deal with monitor automatically
3373 (yes, this should be two patches, but the diffs in AltosSerial were merged together).
3375 First, this replaces the existing flush/flush_reply mess with two simple functions,
3376 one to flush output to the serial device, making sure that all data written will be seen
3377 while we wait for input. The other sucks any pending input off of the serial line and
3380 Second, AltosSerial now tracks whether the serial line is being used for telemetry
3381 monitoring. If so, it enables monitoring, otherwise it disables it. Eliminates a
3382 bunch of manual state tracking elsewhere.
3384 Signed-off-by: Keith Packard <keithp@keithp.com>
3386 commit edcfb1bdf64772d3b83405ccf99385b8fea5d8e4
3387 Author: Keith Packard <keithp@keithp.com>
3388 Date: Sun Aug 29 17:33:59 2010 -0700
3390 libaltos: AltusMetrum devices use more than one USB ID.
3392 List all usb devices, picking those with AltusMetrum IDs.
3394 Signed-off-by: Keith Packard <keithp@keithp.com>
3396 commit 236685807b63860ad033aa0254ce8f6d8d36d4ef
3397 Author: Bdale Garbee <bdale@gag.com>
3398 Date: Fri Aug 27 22:26:09 2010 -0600
3400 update changelogs for Debian build
3402 commit 1cda15fdef2d9d3e54354bd5c43a0bcc7e3240cb
3403 Author: Bdale Garbee <bdale@gag.com>
3404 Date: Fri Aug 27 22:24:51 2010 -0600
3406 fix up for an 0.7 release
3408 commit 4c5c7c7f198775c398c1ad2edafb3488384cc297
3409 Author: Bdale Garbee <bdale@gag.com>
3410 Date: Fri Aug 27 22:13:38 2010 -0600
3412 update changelogs for Debian build
3414 commit 42055af5c6f17d14a2f1c6a2b5e1ce6d3b45a615
3415 Author: Bdale Garbee <bdale@gag.com>
3416 Date: Fri Aug 27 13:13:19 2010 -0600
3418 update changelogs for Debian build
3420 commit 0bd4cc03b3bf23aa32b5ce1921078021d1d8a9c6
3421 Author: Bdale Garbee <bdale@gag.com>
3422 Date: Fri Aug 27 13:12:46 2010 -0600
3424 fix path to installed shared library
3426 commit 99c1d9b4ef10ec4ebbee058ce0bb38c954a0a3a6
3427 Author: Bdale Garbee <bdale@gag.com>
3428 Date: Fri Aug 27 12:41:26 2010 -0600
3430 update changelogs for Debian build
3432 commit cf65c6b8056c4af7c26b52ec6f9fbd3400cef638
3433 Merge: 5f2f6a8 ae5eff7
3434 Author: Bdale Garbee <bdale@gag.com>
3435 Date: Fri Aug 27 12:38:25 2010 -0600
3437 Merge branch 'bdale'
3442 commit ae5eff7bc0b63047737223423009707bedcb00f5
3443 Author: Bdale Garbee <bdale@gag.com>
3444 Date: Fri Aug 27 12:37:36 2010 -0600
3446 Revert "lose the prebuild hook for now while I'm fumbling"
3448 This reverts commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf.
3450 commit de2e71c4923a0282df74dbe37d087c34b4ddd279
3451 Author: Bdale Garbee <bdale@gag.com>
3452 Date: Fri Aug 27 12:25:20 2010 -0600
3454 fix man page delivery path
3456 commit a8dbe082960dc9bdd44c6e4b1198423c4e566029
3457 Author: Bdale Garbee <bdale@gag.com>
3458 Date: Fri Aug 27 12:18:28 2010 -0600
3460 install altosui man page
3462 commit 5cc933039e4763b8675611c63b6147b42878a2bb
3463 Author: Bdale Garbee <bdale@gag.com>
3464 Date: Fri Aug 27 12:16:19 2010 -0600
3466 fix permissions on installed jar file, switch from ao-view to altosui in
3469 commit 138009e9fad01f79df4c3820fbc206f78688bdce
3470 Author: Bdale Garbee <bdale@gag.com>
3471 Date: Fri Aug 27 12:06:01 2010 -0600
3473 update Debian standards version
3475 commit c280071b7db4e9a7af31dc5740eb8d27f137950e
3476 Author: Bdale Garbee <bdale@gag.com>
3477 Date: Fri Aug 27 12:04:13 2010 -0600
3479 fix up the wrapper's path to the jar file
3481 commit 5f2f6a8f9ba56be867888758848bc7f152ccbd47
3482 Merge: 63bd34c 9d1b27f
3483 Author: Keith Packard <keithp@keithp.com>
3484 Date: Fri Aug 27 11:00:31 2010 -0700
3486 Merge remote branch 'origin/master' into new-packet-format
3488 commit 63bd34cd1b5a411489e8c3ab377f0fe0eec11f67
3489 Author: Keith Packard <keithp@keithp.com>
3490 Date: Fri Aug 27 10:58:55 2010 -0700
3492 altosui: add elevation and range information
3494 Signed-off-by: Keith Packard <keithp@keithp.com>
3496 commit 72a18502e40f55cbba6418dc94315517881cd411
3497 Author: Bdale Garbee <bdale@gag.com>
3498 Date: Fri Aug 27 11:51:24 2010 -0600
3500 add an install target for altosui
3502 commit 72c33a72ee105ec692dad62d6d9c1ad40b89bfe8
3503 Author: Bdale Garbee <bdale@gag.com>
3504 Date: Fri Aug 27 11:45:19 2010 -0600
3506 add install target for libaltos
3508 commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf
3509 Author: Bdale Garbee <bdale@gag.com>
3510 Date: Fri Aug 27 11:26:29 2010 -0600
3512 lose the prebuild hook for now while I'm fumbling
3514 commit 9ea94411c9730f7a271366d309ab4827beeeb839
3515 Author: Bdale Garbee <bdale@gag.com>
3516 Date: Fri Aug 27 11:17:54 2010 -0600
3518 add a dummy install target
3520 commit c443f43f8dee6e0fcbcecf9d09e948fd928b7af4
3521 Merge: 2950431 2923cf5
3522 Author: Bdale Garbee <bdale@gag.com>
3523 Date: Fri Aug 27 03:08:53 2010 -0600
3525 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
3527 commit 2923cf5057f9cef110dd547d8677ea5b60e00796
3528 Author: Keith Packard <keithp@keithp.com>
3529 Date: Fri Aug 27 00:10:29 2010 -0700
3531 altos: prepare for sdcc 2.9.1
3533 A few minor language changes -- non-standard keywords are now prefixed
3534 with __, such as 'at', 'interrupt', 'naked'.
3536 Signed-off-by: Keith Packard <keithp@keithp.com>
3538 commit 68967157cee620ebedcc8c2ffd6fc7656532087b
3539 Author: Keith Packard <keithp@keithp.com>
3540 Date: Thu Aug 26 23:55:44 2010 -0700
3542 altosui: command line args are converted to csv format
3544 Signed-off-by: Keith Packard <keithp@keithp.com>
3546 commit 7e0506dc2014b7178f52b950e8c1cb820b35f9c6
3547 Author: Keith Packard <keithp@keithp.com>
3548 Date: Thu Aug 26 23:54:53 2010 -0700
3550 altosui: Remove debug printf from AltosState.java
3552 Signed-off-by: Keith Packard <keithp@keithp.com>
3554 commit 49364608b59de7421ab00d87d2685bc3b5f58411
3555 Author: Keith Packard <keithp@keithp.com>
3556 Date: Thu Aug 26 23:53:06 2010 -0700
3558 altosui: When parsing saved telem files, errors shouldn't abort file
3560 Make syntax errors in telem files just skip the current line and move
3561 on to the next one instead of abandoning the whole file.
3563 Signed-off-by: Keith Packard <keithp@keithp.com>
3565 commit a16db143fc7ca72dc91e7989420049192114642d
3566 Author: Keith Packard <keithp@keithp.com>
3567 Date: Thu Aug 26 23:50:51 2010 -0700
3569 altosui: Serial line is in UTF-8 encoding. Deal with it.
3571 We read bytes from the serial line and need to convert each line into
3572 a string. So, save the bytes and at EOL, pass the whole mess to the
3573 string constructor with the appropriate encoding info.
3575 Signed-off-by: Keith Packard <keithp@keithp.com>
3577 commit 0942912163255523d923140c01afbdb5da1c19b5
3578 Author: Keith Packard <keithp@keithp.com>
3579 Date: Thu Aug 26 23:49:37 2010 -0700
3581 altosui: Add support for old (version < 3) telemetry files
3583 This lets the code read telemetry files from pre-released versions of
3584 the software. Not strictly necessary for production, but useful for
3585 analysing old files.
3587 Signed-off-by: Keith Packard <keithp@keithp.com>
3589 commit e383595cd281687de903fb6176564bbef270cb83
3590 Author: Keith Packard <keithp@keithp.com>
3591 Date: Thu Aug 26 23:47:38 2010 -0700
3593 altosui: AltosEepromReader was mis-setting boost tick
3595 It was supposed to use record.tick instead of the (unset) state.tick
3598 Signed-off-by: Keith Packard <keithp@keithp.com>
3600 commit 651f6102ac79459fc8d5679d852c963dcb5bb3fc
3601 Author: Keith Packard <keithp@keithp.com>
3602 Date: Thu Aug 26 23:44:25 2010 -0700
3604 altosui: add rssi and distance/dir from pad to CSV files
3606 Just adds a couple more fields to the CSV files that might be interesting.
3608 Signed-off-by: Keith Packard <keithp@keithp.com>
3610 commit 3dc67c1401976d6e9e2e942d5a4707a4810a0404
3611 Author: Keith Packard <keithp@keithp.com>
3612 Date: Thu Aug 26 23:43:00 2010 -0700
3614 altosui: Add AltosGreatCircle constructors
3616 This adds constructurs from AltosGPS pairs and also one from empty
3617 args (which defines both distance and bearing as 0).
3619 Signed-off-by: Keith Packard <keithp@keithp.com>
3621 commit f0fd423d0bf83bc5c3f9d39e9c09397fbe8caed2
3622 Author: Keith Packard <keithp@keithp.com>
3623 Date: Thu Aug 26 23:41:26 2010 -0700
3625 altosui: Move number parsing code to Altos general class
3627 This moves these shared functions to the global shared class.
3629 Signed-off-by: Keith Packard <keithp@keithp.com>
3631 commit 68b2b66d7574dfd0bd5e3571b8ffad32ca5d2b73
3632 Author: Keith Packard <keithp@keithp.com>
3633 Date: Thu Aug 26 23:37:29 2010 -0700
3635 altos: mark gps date written only after it gets into eeprom
3637 Data logging doesn't start until boost detect occurs. As the GPS date
3638 is only logged once, if that happens before logging is written to the
3639 flash, then the GPS date will never get saved.
3641 Signed-off-by: Keith Packard <keithp@keithp.com>
3643 commit aa6c27df5db6bdae59d00affccb891854a6caa18
3644 Author: Keith Packard <keithp@keithp.com>
3645 Date: Thu Aug 26 15:59:09 2010 -0700
3647 altos: print GPS state flags in GPS 'g' command
3649 Having the GPS state information can help with GPS debugging.
3651 Signed-off-by: Keith Packard <keithp@keithp.com>
3653 commit 34055129b4008f6a9833887b12dee39ffa408002
3654 Author: Keith Packard <keithp@keithp.com>
3655 Date: Thu Aug 26 15:57:09 2010 -0700
3657 altos: always rebuild ao_product.c to track git version
3659 The git version is built into ao_product.c and saved in eeprom log
3660 files, providing useful diagnostics about the firmware revision used
3661 for each flight. However, if ao_product.c isn't recompiled, then the
3662 updated version won't be included. Force recompilation of this file
3663 each time make is run to ensure that the final output contains an
3664 updated version number.
3666 Signed-off-by: Keith Packard <keithp@keithp.com>
3668 commit 99400fdc0f19ef538fc362dde5c3ab5b7cdac409
3669 Author: Keith Packard <keithp@keithp.com>
3670 Date: Tue Aug 24 16:43:38 2010 -0700
3672 altosui: flush replies from serial link when entering debug mode
3674 We use replies in debug mode a lot and depend on them matching the
3675 expected parameters. The case which caused trouble was using
3676 TeleMetrum to reprogram TeleDongle -- sending the 'm 0' command (to
3677 disable telemetry monitoring on TeleDongle) to the TeleMetrum caused
3678 it to reply 'Syntax Error' which confused the subsequent flashing
3679 operation. Flushing that reply gets things back in sync.
3681 Signed-off-by: Keith Packard <keithp@keithp.com>
3683 commit ba086cc77273efe5397f60dcaccd1e3771441481
3684 Author: Keith Packard <keithp@keithp.com>
3685 Date: Tue Aug 24 04:02:27 2010 -0700
3687 altosui: write USB serial number string while flashing
3689 USB serial number is encoded in UCS2 as a part of the string
3690 descriptors. Place those right after the other rom config bits so that
3691 altosui can find it. altosui is changed to write the serial number there.
3693 Signed-off-by: Keith Packard <keithp@keithp.com>
3695 commit 220f3afdaa432c65f8ad45be7cdbe5c8a3616db3
3696 Author: Keith Packard <keithp@keithp.com>
3697 Date: Tue Aug 24 04:01:47 2010 -0700
3699 altosui: always display romconfig ui while flashing
3701 commit f62b2aa08ebfd912b3c732397d43ff9f6162ec88
3702 Author: Keith Packard <keithp@keithp.com>
3703 Date: Tue Aug 24 04:01:14 2010 -0700
3705 altosui: fetch existing romconfig for flashing
3707 commit d93787284c8e514a929edb9f944c98ae0206a33f
3708 Author: Keith Packard <keithp@keithp.com>
3709 Date: Tue Aug 24 03:59:09 2010 -0700
3711 altosui: Delay mapping Flash UI until flashing actually starts
3713 The flash operation may be abandoned before it even starts; this makes
3714 sure the UI doesn't flash up on the screen.
3716 Signed-off-by: Keith Packard <keithp@keithp.com>
3718 commit 7d44cbd621d2b113ac2b802ef17e3d8a660ce7f2
3719 Author: Keith Packard <keithp@keithp.com>
3720 Date: Tue Aug 24 03:58:00 2010 -0700
3722 altosui: disable radio monitoring while using serial line for debugging
3724 commit 7bd220dfd9b3fb0e42eb90c3b37eb7b4169eb21b
3725 Author: Keith Packard <keithp@keithp.com>
3726 Date: Tue Aug 24 00:29:11 2010 -0700
3728 altosui: Add ability to create CSV file from telem or eeprom files
3730 This creates a comma separated value file to export data for
3733 Signed-off-by: Keith Packard <keithp@keithp.com>
3735 commit 634a550149e7c344a22a637ba484f115592b1018
3736 Author: Keith Packard <keithp@keithp.com>
3737 Date: Mon Aug 23 23:15:05 2010 -0700
3739 altosui: refactor logfile chooser dialog to share more code
3741 Move file opening logic into logfile chooser as it can be shared that way.
3743 Signed-off-by: Keith Packard <keithp@keithp.com>
3745 commit afea6c264c5ebf12f1d629bd4bc724da86d11b7a
3746 Merge: 0e17853 9d1b27f
3747 Author: Anthony Towns <aj@erisian.com.au>
3748 Date: Tue Aug 24 00:02:31 2010 -0600
3750 Merge branch 'master' of git://git.gag.com/fw/altos
3752 commit a55b132668a819cc26478a609cb79bd9190deb9d
3753 Author: Keith Packard <keithp@keithp.com>
3754 Date: Mon Aug 23 23:01:36 2010 -0700
3756 altosui: Separate out log file choosing dialog to share with CSV generator
3758 This dialog will be shared with the CSV file generating code, so split
3759 it out instead of duplicating it.
3761 Signed-off-by: Keith Packard <keithp@keithp.com>
3763 commit 295043112ccde35092945c286596f9045ee6fa05
3764 Merge: 2007288 ef8376c
3765 Author: Bdale Garbee <bdale@gag.com>
3766 Date: Mon Aug 23 23:11:22 2010 -0600
3768 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
3770 commit ef8376c4dd8262a34e02b6bb9e19e907ac2f4330
3771 Author: Keith Packard <keithp@keithp.com>
3772 Date: Mon Aug 23 22:08:30 2010 -0700
3774 altosui: make default Manifest look for built-in freetts
3776 commit 56b906f535ac2f86bcab71addbbcd376d74f6a73
3777 Author: Keith Packard <keithp@keithp.com>
3778 Date: Mon Aug 23 22:03:36 2010 -0700
3780 altos: Place rom config variables in fixed location
3782 The device serial number and radio calibration values are stored in
3783 flash, mostly so that TeleDongle gets them saved.
3785 Placing them in well-known locations (starting at 0xa0) makes it
3786 possible to find the previous configuration and to re-write it
3787 easily, without requiring the .map file.
3789 altosui doesn't have the .map file parsing code, so it relies upon
3790 this new technique. As a benefit, it reads the old values from the
3791 device before reprogramming it.
3793 Signed-off-by: Keith Packard <keithp@keithp.com>
3795 commit 4c0c099716197ef7539be0cf55bbb164f6804958
3796 Author: Keith Packard <keithp@keithp.com>
3797 Date: Mon Aug 23 22:02:21 2010 -0700
3799 altosui: Finish device programming code
3801 Altosui can now reprogram Altusmetrum devices.
3803 Signed-off-by: Keith Packard <keithp@keithp.com>
3805 commit bd2b44ddd61fadd8bf8ee6bf783ce019b1be7cc0
3806 Author: Keith Packard <keithp@keithp.com>
3807 Date: Mon Aug 23 22:01:38 2010 -0700
3809 altosui: Remove debug printf from AltosRomconfig
3811 commit c3f57ffdb6c74de90d982eacd604e658ce9b00a5
3812 Author: Keith Packard <keithp@keithp.com>
3813 Date: Mon Aug 23 22:01:11 2010 -0700
3815 altosui: flush serial output before waiting for reply
3817 commit 8857ac5e43eac6db8d5594b8864df497a712242b
3818 Author: Keith Packard <keithp@keithp.com>
3819 Date: Mon Aug 23 22:00:16 2010 -0700
3821 altosui: remove debug printf from AltosHexfile
3823 commit b1758be01397fd49c441f40852f3558fe9343a2d
3824 Author: Keith Packard <keithp@keithp.com>
3825 Date: Mon Aug 23 21:58:50 2010 -0700
3827 altosui: Add lots more cc1111 debug interface functions
3829 These are sufficient to program the flash.
3831 Signed-off-by: Keith Packard <keithp@keithp.com>
3833 commit f9e80f39bc39e5882bfe75f959b6501cb3277cd2
3834 Author: Keith Packard <keithp@keithp.com>
3835 Date: Mon Aug 23 21:55:49 2010 -0700
3837 libaltos: use pipe to wake up getchar on close. use mutexes
3839 commit 86f7b9314b042f2e512fdf35067817e68532867b
3840 Author: Keith Packard <keithp@keithp.com>
3841 Date: Mon Aug 23 21:54:47 2010 -0700
3843 altosui: pad TM config dialog values to avoid clipping descenders
3845 commit b8519b8669ff54741dd738ac343fbd2424451247
3846 Author: Keith Packard <keithp@keithp.com>
3847 Date: Mon Aug 23 21:53:37 2010 -0700
3849 ao-dumplog: Fix --remote and --channel options to actually work
3851 commit ebeb13688a9a5442c838641ede6ba0dc92c9a1a4
3852 Author: Keith Packard <keithp@keithp.com>
3853 Date: Mon Aug 23 14:32:58 2010 -0700
3855 altosui: Add debug dongle API, split flash UI out
3857 Create an API to talk through the debug port on another AltOS
3858 device. Split the flash UI out from the flash implementation so that a
3859 command line flash utility can be written.
3861 Signed-off-by: Keith Packard <keithp@keithp.com>
3863 commit 7f8d7978606abe544b1b9b6065c5480ed813b8ec
3864 Author: Keith Packard <keithp@keithp.com>
3865 Date: Mon Aug 23 11:53:19 2010 -0700
3867 altosui: Add .ihx file reading code and stub out flashing UI
3869 Signed-off-by: Keith Packard <keithp@keithp.com>
3871 commit 2007288da8a83e3aa925e11cc196f1c65aab2e5c
3872 Author: Bdale Garbee <bdale@gag.com>
3873 Date: Thu Aug 5 15:00:15 2010 -0400
3875 working on java packaging details
3877 commit 44b26dd550eef789e70082ccaa46d7d430c67bce
3878 Author: Bdale Garbee <bdale@gag.com>
3879 Date: Thu Aug 5 15:15:04 2010 -0400
3881 add freetts as a build dep
3883 commit 0e17853c08f77debef3e8cf82e9cdb6a5079fc9b
3884 Author: Keith Packard <keithp@keithp.com>
3885 Date: Sun Aug 22 23:06:15 2010 -0700
3887 altosui: Set callsign when fetching eeprom data over the air
3889 The updated firmware places the callsign in each packet to comply with
3890 regulations, this ensures that TeleDongle has the current callsign
3893 Signed-off-by: Keith Packard <keithp@keithp.com>
3895 commit 953bc3438b10b21f3d65d292356c4ab2de23cddd
3896 Author: Keith Packard <keithp@keithp.com>
3897 Date: Sun Aug 22 23:05:20 2010 -0700
3899 altosui: Add TeleMetrum configuration
3901 This presents a dialog with all of the user-settable options in the
3902 TeleMetrum set for editing. Combo boxes are used for everything except
3905 Signed-off-by: Keith Packard <keithp@keithp.com>
3907 commit e1463d8e265dfd42c824d90088cd2a51b4cf8131
3908 Author: Keith Packard <keithp@keithp.com>
3909 Date: Sat Aug 21 17:57:31 2010 -0700
3911 altosui: Make teledongle callsign configurable
3913 Teledongle uses the callsign in packet mode; this provides a way to
3916 Signed-off-by: Keith Packard <keithp@keithp.com>
3918 commit 09252ec22d58e946494e4ca2cf367bf3bbe1cc50
3919 Author: Keith Packard <keithp@keithp.com>
3920 Date: Sat Aug 21 17:09:41 2010 -0700
3922 altos: Define USB product ID in per-product Makefile.defs file
3924 This allows Win7 to tell which kind of device is connected purely by
3925 USB id as it doesn't expose the USB product ID string to user space.
3927 Signed-off-by: Keith Packard <keithp@keithp.com>
3929 commit 22800dc094797e1e0ad99124198809d0360f7556
3930 Author: Keith Packard <keithp@keithp.com>
3931 Date: Tue Aug 17 18:22:28 2010 -0700
3933 altosui: Select devices by USB vendor/product ID.
3935 Because Win7 doesn't expose the product name, we're swtiching to using
3936 the USB idProduct/idVendor values. This patch adds support for
3937 selecting devices by those new IDs.
3939 Signed-off-by: Keith Packard <keithp@keithp.com>
3941 commit d14c96663a1027164fa30ed89b53f5a9d3fdb82b
3942 Author: Keith Packard <keithp@keithp.com>
3943 Date: Tue Aug 17 18:19:43 2010 -0700
3945 libaltos: integrate Windows support.
3947 This adds Windows support for discovery and I/O.
3949 The API to the library is mostly unchanged, except that it now exports
3950 product and vendor USB IDs as Win7 doesn't expose the product name
3951 anywhere that we've been able to find, so we'll be updating the
3952 firmware to use unique idProduct values for each product.
3954 Signed-off-by: Keith Packard <keithp@keithp.com>
3956 commit 9d1b27fa147fc8b765d5be165ebef7ee0f85bd37
3957 Author: Bdale Garbee <bdale@gag.com>
3958 Date: Wed Aug 11 22:11:50 2010 -0400
3960 update changelogs for Debian build
3962 commit b6da90b4627dde1fe88240c38c51559d8f781dd0
3963 Author: Bdale Garbee <bdale@gag.com>
3964 Date: Wed Aug 11 17:15:39 2010 -0400
3966 update changelogs for Debian build
3968 commit 4918f73fd0a0f3f5d52907f95a0ec385e901d447
3969 Author: Bdale Garbee <bdale@gag.com>
3970 Date: Wed Aug 11 08:50:27 2010 -0400
3972 update changelogs for Debian build
3974 commit f63f16a70e4d0535667a6364cafcbff026ee6a8c
3975 Author: Bdale Garbee <bdale@gag.com>
3976 Date: Wed Aug 11 08:36:59 2010 -0400
3978 update changelogs for Debian build
3980 commit 294d9c7db21eaf1e71504dbcca5040371abcce55
3981 Author: Keith Packard <keithp@keithp.com>
3982 Date: Sat Aug 7 22:30:55 2010 -0400
3984 ao-dumplog: add --channel option (for use with -R option)
3986 Sets the channel when downloading data with the -R option.
3988 Signed-off-by: Keith Packard <keithp@keithp.com>
3990 commit f317f1324b69b4241f4bb192e164b33d712d5a43
3991 Author: Keith Packard <keithp@keithp.com>
3992 Date: Sat Aug 7 00:42:25 2010 -0400
3994 altosui: Start adding code to write csv files from eeprom/telem files
3996 This is a start to code which can write out a csv file full of flight
3997 data from either an eeprom or telem input file. It's not hooked up,
3998 but the restructuring necessary is finished and the output is started.
4000 Signed-off-by: Keith Packard <keithp@keithp.com>
4002 commit 4738cb2fc639adb1d9237e6c903479f0690dd81a
4003 Author: Keith Packard <keithp@keithp.com>
4004 Date: Sat Aug 7 00:40:59 2010 -0400
4006 altos: add callsign to packet mode, increase payload to 64 bytes
4008 Untested, but it 'should' work. Need to add callsign setting to packet
4011 Signed-off-by: Keith Packard <keithp@keithp.com>
4013 commit b7699a5907e64bc7547fcc27e73f4a35bbaabfff
4014 Author: Keith Packard <keithp@keithp.com>
4015 Date: Fri Aug 6 13:09:21 2010 -0400
4017 altosui: Add comments to Eeprom reader
4019 commit 0e917f3ff822616adb147517ac961422e5fedbfd
4020 Author: Keith Packard <keithp@keithp.com>
4021 Date: Thu Aug 5 22:49:53 2010 -0400
4023 altosui: Compute flight state from eeprom data
4025 This lets eeprom files be used to replay flights.
4027 Signed-off-by: Keith Packard <keithp@keithp.com>
4029 commit a0a9b445a4d379730b67720f8d7b682d5206a582
4030 Author: Bdale Garbee <bdale@gag.com>
4031 Date: Thu Aug 5 15:16:48 2010 -0400
4033 update changelogs for Debian build
4035 commit e075b8623533965b1b77b77d38c2df32f5f77fce
4036 Author: Bdale Garbee <bdale@gag.com>
4037 Date: Thu Aug 5 15:16:24 2010 -0400
4039 update changelogs for Debian build
4041 commit 410de62715a0830f03b0a65d6c7730dff51e6ef4
4042 Author: Bdale Garbee <bdale@gag.com>
4043 Date: Thu Aug 5 15:15:04 2010 -0400
4045 add freetts as a build dep
4047 commit 0b85160c44d934f3d1352c1c07c296d01ceffc32
4048 Author: Bdale Garbee <bdale@gag.com>
4049 Date: Thu Aug 5 15:02:17 2010 -0400
4051 update changelogs for Debian build
4053 commit d091099753d9cae01c4805812425ebea19ec09cf
4054 Author: Bdale Garbee <bdale@gag.com>
4055 Date: Thu Aug 5 15:00:46 2010 -0400
4057 update changelogs for Debian build
4059 commit aed55ef1ce45b0f6e6fefeebf50be97607b31d65
4060 Author: Bdale Garbee <bdale@gag.com>
4061 Date: Thu Aug 5 15:00:15 2010 -0400
4063 working on java packaging details
4065 commit d8bf05f7ad55964c9bce0551e58f4ef6c9f721ad
4066 Author: Keith Packard <keithp@keithp.com>
4067 Date: Thu Aug 5 13:50:18 2010 -0400
4069 altosui: Split flight record out of telemetry class
4071 This will permit either telemetry or eeprom data to be used to
4072 construct the sequence of flight events for reply or data generation.
4074 Signed-off-by: Keith Packard <keithp@keithp.com>
4076 commit 85a670b5a904d6750d0f179ae307baeb8fc7cbd2
4077 Author: Keith Packard <keithp@keithp.com>
4078 Date: Thu Aug 5 13:40:17 2010 -0400
4080 altosui: Explicitly initialize Altos class
4082 Because the Altos class is never instantiated, the static initializers
4083 are never called, leaving the string to state mapping empty. Hand-code
4084 the call to the initialer instead.
4086 Signed-off-by: Keith Packard <keithp@keithp.com>
4088 commit 02f17f2cd26189e2676a9dc0d86bd959ed0bc3f4
4089 Author: Bdale Garbee <bdale@gag.com>
4090 Date: Thu Aug 5 00:54:05 2010 -0400
4092 move to science menu
4094 commit 9e8f7f75442303f9bfa99a0435984f5d36863ae6
4095 Author: Keith Packard <keithp@keithp.com>
4096 Date: Sat Jul 31 10:34:21 2010 -0700
4098 altosui: Split status and info panels into separate files
4100 This moves some code out of AltosUI.java into separate files
4102 Signed-off-by: Keith Packard <keithp@keithp.com>
4104 commit 9c9b35254c693b3ade42b24d1e29eaf31e6ba2aa
4105 Author: Keith Packard <keithp@keithp.com>
4106 Date: Sat Jul 31 10:24:56 2010 -0700
4108 altosui: Clear displayed data rows as needed.
4110 Signed-off-by: Keith Packard <keithp@keithp.com>
4112 commit 88e0137a60d7a13ddb7781befa76650e13ad44ae
4113 Author: Keith Packard <keithp@keithp.com>
4114 Date: Sat Jul 31 10:07:38 2010 -0700
4116 altosui: Merge gps date and time classes into gps class
4118 No reason to split out the date and time information from the other gps info.
4120 Signed-off-by: Keith Packard <keithp@keithp.com>
4122 commit 1c3b2fe357d6acf28f48aeddd91693f10381be51
4123 Author: Keith Packard <keithp@keithp.com>
4124 Date: Sat Jul 31 10:05:15 2010 -0700
4126 altosui: Capture config and version info in .eeprom files
4128 Instead of only writing the serial number to the .eeprom file, write
4129 all of the config values and all of the version reply to the .eeprom
4130 file. The config values, in particular, contain the accelerometer
4131 calibration data which is needed to correctly compute acceleration
4132 from the captured accelerometer data.
4134 Signed-off-by: Keith Packard <keithp@keithp.com>
4136 commit e286eb61ad2a90746c1c31f95d26d5edb48738d3
4137 Author: Keith Packard <keithp@keithp.com>
4138 Date: Sat Jul 31 09:57:49 2010 -0700
4140 altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos constants
4142 Renames the eeprom downloading code and adds a new file to share the
4143 flight data constants across the various UI modules.
4145 Signed-off-by: Keith Packard <keithp@keithp.com>
4147 commit e3a9e3815db3f290e28b40ae02aa654f515cfc37
4148 Author: Bdale Garbee <bdale@gag.com>
4149 Date: Sat Jul 31 10:55:27 2010 -0600
4151 update changelogs for Debian build
4153 commit 8fc261c2b77bb8aab201a0649a84b5ffa236ce26
4154 Author: Bdale Garbee <bdale@gag.com>
4155 Date: Sat Jul 31 10:55:07 2010 -0600
4157 see if my new freetts package works
4159 commit 2f114c7ff6b0deddb790d34139bb11ac37f8c0da
4160 Author: Bdale Garbee <bdale@gag.com>
4161 Date: Thu Jul 29 13:30:36 2010 -0600
4163 update changelogs for Debian build
4165 commit 7877496d47ce6d25210c0e1c6500666dbfc0876c
4166 Merge: c71061a 4cf39b1
4167 Author: Keith Packard <keithp@keithp.com>
4168 Date: Thu Jul 29 12:07:49 2010 -0700
4170 Merge remote branch 'origin/master'
4172 commit c71061a37d3d3be2855b61cde33d2371989d7681
4173 Author: Keith Packard <keithp@keithp.com>
4174 Date: Thu Jul 29 12:06:06 2010 -0700
4176 Make altosui test script executable
4178 commit 4cf39b13a574cb656999cf329f5b08e7f910604b
4179 Author: Bdale Garbee <bdale@gag.com>
4180 Date: Thu Jul 29 12:57:31 2010 -0600
4182 update changelogs for Debian build
4184 commit d1848193d8208388e4ccdfbed4e5663a9ba04dd3
4185 Author: Bdale Garbee <bdale@gag.com>
4186 Date: Thu Jul 29 12:56:59 2010 -0600
4188 add a jdk to the build deps
4190 commit 9ad4984124b6c05114feac4c4ac078dc248ce16a
4191 Author: Keith Packard <keithp@keithp.com>
4192 Date: Thu Jul 29 11:56:24 2010 -0700
4194 altosui: remove option to install to alternate volume
4196 commit 2e797b18f0724caf7aaf96f45997998c7416f34e
4197 Author: Bdale Garbee <bdale@gag.com>
4198 Date: Thu Jul 29 12:50:57 2010 -0600
4200 update changelogs for Debian build
4202 commit 89109f9dff3ce855d80da166e3362375282f745d
4203 Author: Bdale Garbee <bdale@gag.com>
4204 Date: Thu Jul 29 12:47:37 2010 -0600
4206 ugh, fixing failure due to aborted build
4208 commit 6fb8546575f6d99676dbb1dce190b0b7cf24b657
4209 Author: Keith Packard <keithp@keithp.com>
4210 Date: Thu Jul 29 11:45:56 2010 -0700
4212 Moved Mac OS packaging to altosui dir
4214 commit 865d5cdf8931ffc796f608e3e12d7c5a70832825
4215 Author: Bdale Garbee <bdale@gag.com>
4216 Date: Thu Jul 29 12:45:18 2010 -0600
4218 add swig as a build dep
4220 commit 91d75fb3919f606a1956bf8c6423a8012d99a56a
4221 Author: Keith Packard <keithp@keithp.com>
4222 Date: Thu Jul 29 11:45:12 2010 -0700
4224 altosui: Switch eeprom extension back to .eeprom
4226 commit 33ffd89d5a64c991d28bd7369b61e1faa18f605b
4227 Author: Bdale Garbee <bdale@gag.com>
4228 Date: Thu Jul 29 12:40:52 2010 -0600
4230 update changelogs for Debian build
4232 commit 62b4cc51a0f54ef363cbff46caef80a0afecdea2
4233 Author: Bdale Garbee <bdale@gag.com>
4234 Date: Thu Jul 29 12:40:25 2010 -0600
4236 update changelogs for Debian build
4238 commit 6f86db5e0360bef26b21336769b7635e3a11e160
4239 Author: Keith Packard <keithp@keithp.com>
4240 Date: Thu Jul 29 11:24:47 2010 -0700
4242 Add Mac OS X packaging bits
4244 Signed-off-by: Keith Packard <keithp@keithp.com>
4246 commit 950f0a8c54e5835ee5d8b0aea360bd8362c21bc5
4247 Author: Keith Packard <keithp@keithp.com>
4248 Date: Thu Jul 29 11:09:19 2010 -0700
4250 altosui: construct Darwin application directory
4252 This adds the necessary files and build steps to construct
4253 AltosUI.app on a Darwin system.
4255 Signed-off-by: Keith Packard <keithp@keithp.com>
4257 commit 669c5f52abb972a82ed6efbee7a8c7d20afb5cd0
4258 Author: Keith Packard <keithp@keithp.com>
4259 Date: Thu Jul 29 10:48:52 2010 -0700
4261 libaltos: build with java src encoding UTF8
4263 Signed-off-by: Keith Packard <keithp@keithp.com>
4265 commit efa0e034a161f4852947cbac06537d6ba4422a0e
4266 Author: Keith Packard <keithp@keithp.com>
4267 Date: Thu Jul 29 10:48:25 2010 -0700
4269 altosui: remove debug printf
4271 Signed-off-by: Keith Packard <keithp@keithp.com>
4273 commit 53c279b9e96da8b69837ae84038a78ca5707f2a5
4274 Author: Keith Packard <keithp@keithp.com>
4275 Date: Thu Jul 29 10:45:02 2010 -0700
4277 altosui: Close serial, join reader thread, free altos_file
4279 Separating out the close and free actions ensures that the reader thread will not
4280 access freed memory or dereference a null pointer while shutting down the
4281 connection to the serial device. Otherwise, a race condition exists between the
4282 serial close and the thread join.
4284 Signed-off-by: Keith Packard <keithp@keithp.com>
4286 commit b8bc9994d8bfde6116c8a509e70ddf45fc4decce
4287 Author: Keith Packard <keithp@keithp.com>
4288 Date: Thu Jul 29 10:24:59 2010 -0700
4290 altosui: Remove unnecessary freetts .jar files
4292 Signed-off-by: Keith Packard <keithp@keithp.com>
4294 commit e33dbbba94ce42295e9fed9f4ba7e46f9eff1517
4295 Author: Keith Packard <keithp@keithp.com>
4296 Date: Thu Jul 29 10:24:09 2010 -0700
4298 altosui: check for closed serial device before reading
4300 Signed-off-by: Keith Packard <keithp@keithp.com>
4302 commit 27a2d0c00acf78628428c20ab68e2bfba06340da
4303 Author: Bdale Garbee <bdale@gag.com>
4304 Date: Thu Jul 29 11:02:38 2010 -0600
4306 update changelogs for Debian build
4308 commit 537492dc961ee6a1945b1041ee3cc0d3f519a42c
4309 Author: Bdale Garbee <bdale@gag.com>
4310 Date: Thu Jul 29 11:01:21 2010 -0600
4312 update changelogs for Debian build
4314 commit adf6cbcba23e24a3824f7e242ec37baa2750ab94
4315 Author: Bdale Garbee <bdale@gag.com>
4316 Date: Thu Jul 29 10:59:18 2010 -0600
4318 update changelogs for Debian build
4320 commit d0fd53bdab2f480cd43b6d7010c2094f4fccda91
4321 Author: Keith Packard <keithp@keithp.com>
4322 Date: Wed Jul 28 21:49:23 2010 -0700
4324 Reset GPS ready status when GPS comes unlocked on the pad
4326 If GPS becomes unlocked, then report that in the UI and via
4329 Signed-off-by: Keith Packard <keithp@keithp.com>
4331 commit 5fd225c3a52445ecdc7c04fac5e3d9a0db177c66
4332 Author: Keith Packard <keithp@keithp.com>
4333 Date: Wed Jul 28 21:01:41 2010 -0700
4335 altosui: report rocket ground bearing at landing only if known
4337 if state.from_pad is null, then there isn't any data to report.
4339 Signed-off-by: Keith Packard <keithp@keithp.com>
4341 commit d2d772164af95a35ea0f5d2413a5be67de9a210f
4342 Author: Keith Packard <keithp@keithp.com>
4343 Date: Wed Jul 28 20:18:36 2010 -0700
4345 altosui: Replace device dialog. Center eeprom monitor.
4347 This adds a custom dialog for selecting device, which makes it look
4348 much nicer on the screen and allows the user to double-click on an
4351 Signed-off-by: Keith Packard <keithp@keithp.com>
4353 commit ea32290704a8ca468f01172166b561833b20c954
4354 Author: Keith Packard <keithp@keithp.com>
4355 Date: Wed Jul 28 19:37:02 2010 -0700
4357 altosui: Fix Save flight data monitor layout, add cancel
4359 Use GridBagLayout to improve the appearance of the flight data monitor
4360 widget, add a cancel button to stop loading data (useful if the
4361 connection is wedged).
4363 Signed-off-by: Keith Packard <keithp@keithp.com>
4365 commit ce90f3fe2aa6e23695ccccb36a8e6e614a08ba31
4366 Author: Keith Packard <keithp@keithp.com>
4367 Date: Wed Jul 28 17:08:42 2010 -0700
4369 altosui: Add progress bar for eeprom downloading status
4371 This has a progress bar tracking the state and block count while
4372 downloading stuff from telemetrum.
4374 Signed-off-by: Keith Packard <keithp@keithp.com>
4376 commit 6599e9576c3da9325a1731144c1b8bc4943184c0
4377 Author: Keith Packard <keithp@keithp.com>
4378 Date: Wed Jul 28 15:41:34 2010 -0700
4380 altosui: Add eeprom data capture function. No UI yet.
4382 Signed-off-by: Keith Packard <keithp@keithp.com>
4384 commit 8a6040e143ecc7830cc1c0114de85f3b72c067eb
4385 Merge: 024d077 554a97e
4386 Author: Keith Packard <keithp@keithp.com>
4387 Date: Wed Jul 28 13:29:51 2010 -0700
4389 Merge remote branch 'keithp/macos'
4391 commit 024d077302f91bdb17abe70d3211ab0949dab8b9
4392 Author: Keith Packard <keithp@keithp.com>
4393 Date: Wed Jul 28 13:29:21 2010 -0700
4397 Signed-off-by: Keith Packard <keithp@keithp.com>
4399 commit 826061eaca88c0dd75051a6006ef6703c91af595
4400 Author: Keith Packard <keithp@keithp.com>
4401 Date: Wed Jul 28 13:10:11 2010 -0700
4403 Add voice test command for help in adjusting volume.
4405 Signed-off-by: Keith Packard <keithp@keithp.com>
4407 commit 71da54a5ce255395376a44586782ab8b6f3b289f
4408 Author: Keith Packard <keithp@keithp.com>
4409 Date: Wed Jul 28 13:01:52 2010 -0700
4411 Make voice and channel menus work.
4413 Stores voice and channel data to preferences.
4415 Signed-off-by: Keith Packard <keithp@keithp.com>
4417 commit e76b9cc32bbcc5176d9bdd6f8d79778024627382
4418 Author: Keith Packard <keithp@keithp.com>
4419 Date: Wed Jul 28 12:24:53 2010 -0700
4421 altosui: Catch errors opening USB devices. Limit list to relevant devices
4423 Avoids a segfault when failing to open a device. Limit listed telemetry
4424 devices to just TeleDongle units.
4426 Signed-off-by: Keith Packard <keithp@keithp.com>
4428 commit 172a2817dde6718724f2b5fad5a7761801446fa0
4429 Merge: f2a006f 81bf204
4430 Author: Keith Packard <keithp@keithp.com>
4431 Date: Wed Jul 28 11:20:22 2010 -0700
4433 Merge branch 'macos'
4435 commit f2a006fd98045066bdf429cc142d033e9feb0a8f
4436 Author: Keith Packard <keithp@keithp.com>
4437 Date: Wed Jul 28 09:31:09 2010 -0700
4439 Make ao_log_data re-entrant as it is used for both sensor and GPS logs
4441 Because ao_log_data is called from two different threads, failing to
4442 make it re-entrant would cause the 'log' pointer parameter to get
4443 overwritten if another thread asked to log data while the eeprom was
4444 busy writing out a block.
4446 This would cause the second thread to re-writing data from the first
4447 thread's address, but without re-checksumming the data as the checksum
4448 is computed before the log mutex is taken.
4450 The bug can be seen by log blocks with invalid checksums.
4452 Here's what happens with the ao_gps_tracking_report and ao_log threads:
4454 ao_gps_tracking_report ao_log
4456 Writes a bunch of records
4457 *blocks* in the eeprom flush
4458 sets ao_log_data 'log' to global 'log'
4459 computes checksum for 'log' block
4460 *blocks* on ao_log_mutex
4462 sets ao_log_data 'log' to 'gps_log'
4463 writes remaining records
4464 'gps_log' is left with svid = 0
4465 *blocks* on ao_gps_tracking_data
4466 writes data, reading from
4467 the current ao_log_data 'log'
4468 pointer which points at 'gps_log'
4470 Making ao_log_data re-entrant fixes this by ensuring that the 'ao_log'
4471 thread has its own copy of the ao_log_data 'log' parameter.
4473 I made this function take an __xdata restricted pointer so that it
4474 could be passed in the dptr register instead of needing to go on the stack.
4476 Signed-off-by: Keith Packard <keithp@keithp.com>
4478 commit 554a97ef455c801dcab825815f44520f96f4c3f3
4479 Author: Keith Packard <keithp@keithp.com>
4480 Date: Tue Jul 27 19:29:38 2010 -0700
4482 Force java source encoding to UTF-8
4484 commit 81bf2042ca39eb106b789e5a08647c3114669358
4485 Author: Keith Packard <keithp@keithp.com>
4486 Date: Tue Jul 27 15:29:28 2010 -0700
4488 Java voice reporting cleanups.
4490 Make sure it says something at the end of a log file replay.
4491 Make sure it reports max speed after motor burn out, and max height
4494 Signed-off-by: Keith Packard <keithp@keithp.com>
4496 commit 8f2f38f2a9fb0c106e2c6b60cdc205292ce329ea
4497 Author: Keith Packard <keithp@keithp.com>
4498 Date: Tue Jul 27 10:18:20 2010 -0700
4500 Java clean ups -- use varargs where possible, remove AltosSerialReader
4502 Add methods that format stuff using String.format for voice and serial
4503 link, remove AltosSerialReader class and just embed that in the
4504 AltosSerial class directly.
4506 Signed-off-by: Keith Packard <keithp@keithp.com>
4508 commit 734cd15ccff691f851359518ce6118f29dc9f88d
4509 Author: Keith Packard <keithp@keithp.com>
4510 Date: Tue Jul 27 10:18:09 2010 -0700
4512 Remove directories as .class file dependencies; it makes them get rebuilt all the time
4514 commit 809feb75e2155e84aebfcc431867edcfd9054670
4515 Author: Keith Packard <keithp@keithp.com>
4516 Date: Tue Jul 27 01:22:56 2010 -0700
4518 Clean up altosui build a bit
4520 commit 3784578a40dcc61f447435cfdf22e13c409cb9c0
4521 Author: Keith Packard <keithp@keithp.com>
4522 Date: Tue Jul 27 00:16:15 2010 -0700
4524 Add application icons for Mac OS X
4526 commit 2c273710ea9b76ebee4101893f9fe84be8a02354
4527 Author: Keith Packard <keithp@keithp.com>
4528 Date: Tue Jul 27 00:11:58 2010 -0700
4530 Add Mac OS X packaging files for altosui
4532 commit a58c44cd904e5429b807e5c23913051ed6484edc
4533 Author: Keith Packard <keithp@keithp.com>
4534 Date: Tue Jul 27 00:09:41 2010 -0700
4536 libaltos: build fat 10.5-compatible library
4538 Signed-off-by: Keith Packard <keithp@keithp.com>
4540 commit 4e3285575e0c7d029e799258587e965779990099
4541 Author: Keith Packard <keithp@keithp.com>
4542 Date: Tue Jul 27 00:09:18 2010 -0700
4544 libaltos: make clean remove all built files
4546 Signed-off-by: Keith Packard <keithp@keithp.com>
4548 commit fb8507975c6e081de2e909eca6faaa8f868b609e
4549 Author: Keith Packard <keithp@keithp.com>
4550 Date: Tue Jul 27 00:08:38 2010 -0700
4552 libaltos needs -I. on all systems
4554 Signed-off-by: Keith Packard <keithp@keithp.com>
4556 commit 0a782026f6b19e84ffd44f1ae1b466363474bd30
4557 Author: Keith Packard <keithp@keithp.com>
4558 Date: Mon Jul 26 18:10:07 2010 -0700
4560 Darwin doesn't have strndup.
4562 This provides a private version of this GNU extension.
4564 Signed-off-by: Keith Packard <keithp@keithp.com>
4566 commit b51497597868a40df039dd3ca11b35a6258bbbb3
4567 Author: Keith Packard <keithp@keithp.com>
4568 Date: Mon Jul 26 18:04:10 2010 -0700
4570 Re-enable Linux support for altosui.
4572 This steals code from cc-usbdev for scanning the USB tree and uses the
4573 same tty code as on Darwin
4575 Signed-off-by: Keith Packard <keithp@keithp.com>
4577 commit e9153c4f2c71ed965822fcfe5112d2bc38506baf
4578 Author: Keith Packard <keithp@keithp.com>
4579 Date: Mon Jul 26 17:04:04 2010 -0700
4583 commit 17188f36fe18c23bc2eb877ac9a01b7693f4b863
4584 Author: Keith Packard <keithp@keithp.com>
4585 Date: Mon Jul 26 17:03:47 2010 -0700
4587 Present list of altos devices in nice format
4589 commit 005e2d6a7bb3b0546b0c1273296875621632ec6d
4590 Author: Keith Packard <keithp@keithp.com>
4591 Date: Mon Jul 26 15:42:48 2010 -0700
4593 Switch AltosUI to libaltos for device access
4595 Signed-off-by: Keith Packard <keithp@keithp.com>
4597 commit c726d8f6eb861801d7543552beab6ee2c920c96f
4598 Author: Keith Packard <keithp@keithp.com>
4599 Date: Mon Jul 26 15:41:39 2010 -0700
4601 Add libaltos which talks to USB connected altos devices
4603 commit 05111d5be4d37bedaaee6415d6ee27347e6a112c
4604 Author: Keith Packard <keithp@keithp.com>
4605 Date: Mon Jul 26 12:52:17 2010 -0700
4607 When the EP0 IN buffer is full, don't panic, just skip sending another
4609 If the host doesn't pull the IN packet out of EP0 before sending
4610 another SETUP command along, the IN buffer will still be busy when we
4611 try to reply to the SETUP command. While I don't quite understand why
4612 this would ever happen, there's no need to panic about it, just drop
4613 the reply packet on the floor.
4615 Signed-off-by: Keith Packard <keithp@keithp.com>
4617 commit d0647950b76bfa9942e4f8cf87353f2b724099f4
4618 Author: Bdale Garbee <bdale@gag.com>
4619 Date: Wed Jul 21 14:26:36 2010 -0600
4621 fix text since TM only has one led to blink
4623 commit 8eda9fe94a7fd40cb84f50e17e64956f1584ebdc
4624 Author: Bdale Garbee <bdale@gag.com>
4625 Date: Tue Jul 20 22:24:32 2010 -0600
4627 update changelogs for Debian build
4629 commit cd8aa79de72b8b6b3a26d0c2522e94c621b70f13
4630 Author: Bdale Garbee <bdale@gag.com>
4631 Date: Tue Jul 20 22:24:01 2010 -0600
4633 update to latest Debian standards version
4635 commit 3284c7516e302e6db403d18866924ad926ffb2a7
4636 Author: Bdale Garbee <bdale@gag.com>
4637 Date: Tue Jul 20 22:20:08 2010 -0600
4639 update changelogs for Debian build
4641 commit 8f1933717e3acfbcb09191da6e79a7944f91f9d9
4642 Author: Bdale Garbee <bdale@gag.com>
4643 Date: Tue Jul 20 22:19:27 2010 -0600
4645 reflect documentation file name change
4647 commit 2cf1ef555a7feceeb1c333b273c19dd848e8d03f
4648 Author: Bdale Garbee <bdale@gag.com>
4649 Date: Tue Jul 20 22:15:47 2010 -0600
4651 update changelogs for Debian build
4653 commit 74c67fc466118b86b4eb5173f7a6886ae220a985
4654 Author: Bdale Garbee <bdale@gag.com>
4655 Date: Tue Jul 20 22:14:27 2010 -0600
4657 add build dep for sndfile
4659 commit 0794ab1e13313fa49b7caf01aef20b052ad78a88
4660 Author: Bdale Garbee <bdale@gag.com>
4661 Date: Tue Jul 20 22:10:01 2010 -0600
4663 update changelogs for Debian build
4665 commit 15a6791ba8f8313b6b55752c3fa7dc254d56dd5c
4666 Author: Bdale Garbee <bdale@gag.com>
4667 Date: Tue Jul 20 22:08:56 2010 -0600
4669 update changelogs for Debian build
4671 commit e747954b6a9e71705f619684df8a118a909b1039
4672 Merge: bd40a5b 695879d
4673 Author: Bdale Garbee <bdale@gag.com>
4674 Date: Tue Jul 20 22:07:22 2010 -0600
4676 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
4678 commit bd40a5b431847c071f5c486d754eca5627e5e3b9
4679 Author: Bdale Garbee <bdale@gag.com>
4680 Date: Tue Jul 20 02:12:03 2010 -0600
4684 commit 695879dbccfc5ec6b79698653c58814158f91686
4685 Author: Keith Packard <keithp@keithp.com>
4686 Date: Wed Jul 14 19:07:02 2010 -0700
4688 Switch DBG pins to GPIO when using any debug commands. Reboot to restore.
4690 If you want to use TeleMetrum as a debug dongle, you need to flip the
4691 three pins used to talk to the remote debug port from SPI mode to GPIO
4694 This patch doesn't provide any way to get back to SPI mode, so you'll
4695 have to reboot the TeleMetrum to write out config parameters or log
4696 flight data after using any debug commands.
4698 Signed-off-by: Keith Packard <keithp@keithp.com>
4700 commit a9ec6be0e92dee01f7aac006ef6f7779c1da1b36
4701 Author: Keith Packard <keithp@keithp.com>
4702 Date: Sat Jul 3 17:42:36 2010 -0400
4704 Telemetry code was mis-computing RSSI
4706 The RSSI data from the hardware reports in 1/2 dBm increments, and so
4707 must be divided to report plain RSSI numbers.
4709 Signed-off-by: Keith Packard <keithp@keithp.com>
4711 commit 62294ea3830d3ea261a8761edc9fa6f98201d321
4712 Author: Bdale Garbee <bdale@gag.com>
4713 Date: Thu Jun 24 12:38:23 2010 -0700
4715 update changelogs for Debian build
4717 commit 4766b13d1241fa585907c6f77707d2d4b3ccff75
4718 Author: Bdale Garbee <bdale@gag.com>
4719 Date: Thu Jun 24 12:37:55 2010 -0700
4721 update changelogs for Debian build
4723 commit 52834517c0706b1f16fb81643a42dc1c1997e00a
4724 Author: Keith Packard <keithp@keithp.com>
4725 Date: Mon Jun 21 15:53:33 2010 -0700
4727 Abort any in-progress radio operation when changing radio channel
4729 In monitor mode, the current receive operation must be aborted so that
4730 the radio channel change can take effect without receiving a
4731 telemetry packet on the old channel. Aborting any in-progress radio
4732 operation will make sure that happens.
4734 Signed-off-by: Keith Packard <keithp@keithp.com>
4736 commit 5933eaa44fe45027b856f1303dd657b974eb53e7
4737 Author: Keith Packard <keithp@keithp.com>
4738 Date: Mon Jun 21 11:44:32 2010 -0700
4740 ao-postflight: was walking off state.data array
4742 commit 11d155d558d0b121b66f089adee0a47d71f65a78
4743 Merge: 544003a 24393ea
4744 Author: Keith Packard <keithp@keithp.com>
4745 Date: Wed Jun 16 21:54:06 2010 -0700
4747 Merge remote branch 'mjb/master'
4749 commit 544003a8da0248fd6f3c62ded86af74ab7cdadf6
4750 Merge: 267923e 93c1e29
4751 Author: Keith Packard <keithp@keithp.com>
4752 Date: Wed Jun 16 21:52:23 2010 -0700
4754 Merge remote branch 'origin/master'
4756 commit 267923e56e22b3635a21f42ef77a3a36158bc273
4757 Author: Keith Packard <keithp@keithp.com>
4758 Date: Wed Jun 16 21:49:43 2010 -0700
4760 Add special code for USB panic's.
4762 The USB system may panic if the hardware isn't ready for IN data when
4763 the driver thinks it should be. This adds a special panic code to make
4764 figuring this out easier.
4766 Signed-off-by: Keith Packard <keithp@keithp.com>
4768 commit 50ae347bf9de49ccfc92d26888f36e155fb406a3
4769 Author: Keith Packard <keithp@keithp.com>
4770 Date: Wed Jun 16 21:48:04 2010 -0700
4772 ao-view: disable radio telemetry monitoring during channel change
4774 This makes ao-view disable the radio so that the channel change has an
4775 immediate effect rather than waiting for a packet on the old channel.
4777 Note that this should also be fixed in the TM code itself so that this
4778 change wouldn't be required.
4780 Signed-off-by: Keith Packard <keithp@keithp.com>
4782 commit 24393eab0ea085f2d0224b59fdc3c00693e5d3a9
4783 Author: Mike Beattie <mike@ethernal.org>
4784 Date: Thu Jun 17 14:04:01 2010 +1200
4786 Extension to KML output format, and minor bug fix
4788 Extended KML output by breaking flight into coloured segments representing
4789 flight state. Add extra statistical information to description bubbles
4790 visible in Google Earth when clicking on links in My Places.
4793 * output kml to file provided as argument.
4794 * move kml coordinate output code to take advantage of nsat calculation
4795 * remove superfluous %9.2f format specifier from raw_file output.
4797 Signed-off-by: Mike Beattie <mike@ethernal.org>
4799 commit 93c1e29b07c331a5ca6e0f647b9d2e9266ed3014
4800 Author: Bdale Garbee <bdale@gag.com>
4801 Date: Tue May 18 23:12:45 2010 -0600
4805 commit bb46c9a1da5788a082e4483e576a5a6d3963507b
4806 Author: Bdale Garbee <bdale@gag.com>
4807 Date: Tue May 18 00:26:28 2010 -0600
4809 update changelogs for Debian build
4811 commit 16c4cae7ebed7bd3ee0f12b8872bf950574f17e8
4812 Author: Bdale Garbee <bdale@gag.com>
4813 Date: Tue May 18 00:26:00 2010 -0600
4815 update changelogs for Debian build
4817 commit bc89d962c87b50e5487628f8ca25e4443ac4823d
4818 Author: Bdale Garbee <bdale@gag.com>
4819 Date: Tue May 18 00:24:03 2010 -0600
4821 merge the altusmetrum-themes package
4823 commit 0c6cf621dfd8339b8bc3915750a3147235f1331b
4824 Merge: 32e430b 563a9dc
4825 Author: Bdale Garbee <bdale@gag.com>
4826 Date: Mon May 17 23:59:43 2010 -0600
4828 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
4830 commit 32e430b8a5f93b312f6359b4d553bad92ed37b19
4831 Author: Bdale Garbee <bdale@gag.com>
4832 Date: Mon May 17 22:43:19 2010 -0600
4834 merge in a derivative of Bob Finch's mere mortals guide as a getting started
4837 commit 563a9dcdfef42718370c49f16cc2271642b3e055
4838 Author: Keith Packard <keithp@keithp.com>
4839 Date: Mon May 17 21:30:57 2010 -0700
4841 Finish basic flight monitoring UI with voice using FreeTTS
4843 This captures telemetry data to log files and presents flight status
4844 information in audio form using FreeTTS.
4846 Signed-off-by: Keith Packard <keithp@keithp.com>
4848 commit 69092ffd23ac1928d5c84413fd00c2423f313fc2
4849 Merge: 3c2211a cc002c0
4850 Author: Bdale Garbee <bdale@gag.com>
4851 Date: Mon May 17 20:10:46 2010 -0600
4853 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
4855 commit cc002c0a43a02845ba67d1a61828be382f307b2e
4856 Author: Keith Packard <keithp@keithp.com>
4857 Date: Sun May 16 22:31:23 2010 -0700
4859 Fix telemetrum.inf, tested by Adrian and Keithp
4861 commit 3c2211ad7877d622435bc9e8c9c0b01d62be6ff0
4862 Author: Bdale Garbee <bdale@gag.com>
4863 Date: Thu May 13 15:37:37 2010 -0600
4867 commit f0433c83d76e90d78fb86a1f4a2f145f3c57fb25
4868 Author: Bdale Garbee <bdale@gag.com>
4869 Date: Thu May 13 01:27:39 2010 -0600
4873 commit 0f05cf06e3f1ec510b11d993d9038211ac66c97b
4874 Author: Bdale Garbee <bdale@gag.com>
4875 Date: Wed May 12 19:54:04 2010 -0600
4877 update changelogs for Debian build
4879 commit 6bd85138c1bfbc1d8b78dce1501870a65a64db36
4880 Author: Bdale Garbee <bdale@gag.com>
4881 Date: Wed May 12 19:53:40 2010 -0600
4883 lose the quotes since they apparently aren't necessary
4885 commit d639144b9bb840fbbced199738787ec054eddf12
4886 Author: Bdale Garbee <bdale@gag.com>
4887 Date: Wed May 12 17:04:41 2010 -0600
4889 update changelogs for Debian build
4891 commit ae6854df00579ea1c3486f1bf8f19443d5ac9498
4892 Author: Bdale Garbee <bdale@gag.com>
4893 Date: Wed May 12 17:04:13 2010 -0600
4895 update desktop file for conformance with current standards
4897 commit 7191d74e680a63728f5eb139069a674fef969e6c
4898 Author: Bdale Garbee <bdale@gag.com>
4899 Date: Wed May 12 16:45:00 2010 -0600
4901 update changelogs for Debian build
4903 commit 68eaaa694bb7bf20642ad11eac8a13c1c8e21b7d
4904 Author: Bdale Garbee <bdale@gag.com>
4905 Date: Wed May 12 16:44:14 2010 -0600
4909 commit 9d3d09578381bb6e6f88c39b0e945371bbc22c5a
4910 Author: Bdale Garbee <bdale@gag.com>
4911 Date: Wed May 12 16:34:49 2010 -0600
4913 add desktop file provided by Bob Finch
4915 commit 3cc1dad3b497524ffef61190dd68908cb19e8c35
4916 Author: Bdale Garbee <bdale@gag.com>
4917 Date: Wed May 12 16:28:35 2010 -0600
4919 add initial package build scripts for Arch Linux from Bob Finch
4921 commit 1b8671bd0a00cec6ae4ccf442cd007b18af82fb0
4922 Author: Bdale Garbee <bdale@gag.com>
4923 Date: Sun May 9 01:41:00 2010 -0600
4927 commit 53b9a9bc28a9278249ff37f92110c21380e93cda
4928 Author: Bdale Garbee <bdale@gag.com>
4929 Date: Thu May 6 13:59:23 2010 -0600
4931 update changelogs for Debian build
4933 commit cde60f16f6ab2cdd5010a0e106ae312d144947cf
4934 Author: Bdale Garbee <bdale@gag.com>
4935 Date: Thu May 6 13:58:31 2010 -0600
4937 Revert "Merge remote branch 'remotes/origin/fix-reset'"
4939 This reverts commit 314d27a73c903fef2968dabac3d5313573713460, reversing
4940 changes made to fa77db2ffd8a749c93767db5a6311131e00473ae.
4942 For whatever reason, this is utterly not doing the right things today!
4944 commit 8be04df7e1e0a369ffb1137c6e2ec63585e3c935
4945 Author: Bdale Garbee <bdale@gag.com>
4946 Date: Thu May 6 12:48:00 2010 -0600
4948 update changelogs for Debian build
4950 commit 314d27a73c903fef2968dabac3d5313573713460
4951 Merge: fa77db2 823fc0a
4952 Author: Bdale Garbee <bdale@gag.com>
4953 Date: Thu May 6 12:47:30 2010 -0600
4955 Merge remote branch 'remotes/origin/fix-reset'
4957 commit 823fc0ac27b8df9b4ba1ca0f229b431baf5b46dd
4958 Author: Keith Packard <keithp@keithp.com>
4959 Date: Wed May 5 12:50:39 2010 -0700
4961 Don't change dbg clock while changing reset_n. Use 20ms everywhere
4963 This changes the reset code to be more conservative about changing
4964 things at the same time, and also sets all timings to 20ms to make
4965 debugging with the scope easier.
4967 Signed-off-by: Keith Packard <keithp@keithp.com>
4969 commit fa77db2ffd8a749c93767db5a6311131e00473ae
4970 Author: Bdale Garbee <bdale@gag.com>
4971 Date: Wed May 5 02:34:41 2010 -0600
4973 update changelogs for Debian build
4975 commit 8b6767e24a88482dbd3d4c4c969a0be08917d22b
4976 Author: Keith Packard <keithp@keithp.com>
4977 Date: Wed May 5 01:32:46 2010 -0700
4979 Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
4981 ao_sleep doesn't delay for a specified time interval as much as one
4984 commit e6bb80975fde20928a830170f0821d59a8c72690
4985 Author: Keith Packard <keithp@keithp.com>
4986 Date: Wed May 5 01:31:57 2010 -0700
4988 Fix all stdio reading functions to be __critical
4990 Oh, right SDCC has '__critical' to mark sections of code that need to
4991 run with interrupts disabled; no need to use EA = 0 and EA = 1.
4993 Signed-off-by: Keith Packard <keithp@keithp.com>
4995 commit ff03cdf746b83542ebcca00d32e6cc69ccfc122d
4996 Author: Bdale Garbee <bdale@gag.com>
4997 Date: Wed May 5 01:57:54 2010 -0600
4999 update changelogs for Debian build
5001 commit 8702f497c4278648303eced1aed5bd76d559521a
5002 Author: Bdale Garbee <bdale@gag.com>
5003 Date: Wed May 5 01:57:11 2010 -0600
5005 initial attempt at a telemetrum turn on script .. needs work
5007 commit 01cefa181b04e53c20109ef8f3ffff633744da73
5008 Author: Bdale Garbee <bdale@gag.com>
5009 Date: Wed May 5 01:56:51 2010 -0600
5011 update changelogs for Debian build
5013 commit 45a1c2d2dfb69e5269ef2756fcd0f734b48d41cb
5014 Author: Bdale Garbee <bdale@gag.com>
5015 Date: Wed May 5 01:54:33 2010 -0600
5017 update changelogs for Debian build
5019 commit f7ff3278bb670df59d7425a014cfe8e3718fea3f
5020 Author: Keith Packard <keithp@keithp.com>
5021 Date: Wed May 5 00:44:42 2010 -0700
5023 Disable interrupts while reading from stdin
5025 With multiple input source support, there is a lag between asking a
5026 device if it has data and then waiting for more data to appear. If an
5027 interrupt signalling additional input arrives in this interval, we'll
5028 go to sleep with input available.
5030 This patch uses a big hammer by just disabling interrupts for the
5033 Signed-off-by: Keith Packard <keithp@keithp.com>
5035 commit aa9ff021d683764a43800eaa18ea0c9be5134939
5036 Author: Keith Packard <keithp@keithp.com>
5037 Date: Tue May 4 21:42:54 2010 -0700
5039 Revert "Add optional 's' command to packet slave to enable/disable slave mode"
5041 This reverts commit e7dc7fab787df63a4de72c8450e94092eb04d7db.
5043 This patch didn't work, and magically appears to break flashing TM
5046 commit 8c95f33686f69da717013ec2c25dbcd99c03aa45
5047 Author: Bdale Garbee <bdale@gag.com>
5048 Date: Thu Apr 29 17:48:44 2010 -0600
5050 more text created during SFO->DEN flight
5052 commit af0613ffc178b9b1f011c315923f92f2581fe53e
5053 Author: Bdale Garbee <bdale@gag.com>
5054 Date: Tue Apr 27 00:18:43 2010 -0600
5056 update changelogs for Debian build
5058 commit 99094f02bf4849ba1f6b9842ded6c39d894320f7
5059 Merge: 641e76c 75d8ffd
5060 Author: Bdale Garbee <bdale@gag.com>
5061 Date: Tue Apr 27 00:17:37 2010 -0600
5063 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
5065 commit 641e76c5d419dab057298541b3a7546877643198
5066 Author: Bdale Garbee <bdale@gag.com>
5067 Date: Tue Apr 27 00:17:15 2010 -0600
5069 add some RF usage information from an email reply sent today, and re-indent
5071 commit 75d8ffd4eadf31d50b2f58c021530c17ff1bdc66
5072 Author: Keith Packard <keithp@keithp.com>
5073 Date: Fri Apr 23 13:53:25 2010 -0700
5075 Autodetect flite voice registration function
5077 Old versions of flite exported the function 'register_cmu_us_kal'
5078 while new ones export 'register_cmu_us_kal16'. This patch just checks
5079 which one is available and uses that.
5081 Signed-off-by: Keith Packard <keithp@keithp.com>
5083 commit 97f4874d19ec05c81a04a3ecd06abffcf7fbfafc
5084 Author: Keith Packard <keithp@keithp.com>
5085 Date: Thu Apr 22 16:25:35 2010 -0700
5087 More ALtosUI changes
5089 commit e7dc7fab787df63a4de72c8450e94092eb04d7db
5090 Author: Keith Packard <keithp@keithp.com>
5091 Date: Thu Apr 22 14:53:44 2010 -0700
5093 Add optional 's' command to packet slave to enable/disable slave mode
5095 This option has been selected for teledongle so that you can use slave
5096 mode and hook two teledongles together over the RF link.
5098 Signed-off-by: Keith Packard <keithp@keithp.com>
5100 commit f4383394b5d2b275b21e3ce8040d8cb9e48bb375
5101 Merge: 5f93cf8 c879b17
5102 Author: Bdale Garbee <bdale@gag.com>
5103 Date: Sun Apr 18 08:36:07 2010 -0600
5105 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
5107 commit 5f93cf8c73555f43c14b1b0757f264bde69e9b8a
5108 Author: Bdale Garbee <bdale@gag.com>
5109 Date: Sun Apr 18 08:35:43 2010 -0600
5111 capture work done on SFO->DEN flight
5113 commit c879b178d83c9a9a521f42a960b10e19b11cee92
5114 Author: Keith Packard <keithp@keithp.com>
5115 Date: Sat Apr 10 22:09:57 2010 -0700
5117 Increase reset switch time to 100ms
5119 Signed-off-by: Keith Packard <keithp@keithp.com>
5121 commit b3a2e1221735d54dc3f2b97b4e75ed6f33ab8227
5122 Author: Bdale Garbee <bdale@gag.com>
5123 Date: Sat Apr 10 15:01:14 2010 -0600
5125 update changelogs for Debian build
5127 commit 9394393c24c0a96b94319f2d0aa78fb498a121c9
5128 Author: Keith Packard <keithp@keithp.com>
5129 Date: Fri Apr 9 17:51:01 2010 -0700
5131 Only have the slave return a packet if it received one.
5133 When the receive is aborted to switch modes, it's important to not
5134 immediately re-acquire the radio and try to send a packet as the
5135 aborting thread won't know to kick the receiver again.
5137 This prevents the 'C' command from locking up as it tries to stop the
5138 packet slave before turning on the transmitter.
5140 Signed-off-by: Keith Packard <keithp@keithp.com>
5142 commit ce39372a3aeffff1a08d609e63164a00cf974663
5143 Author: Bdale Garbee <bdale@gag.com>
5144 Date: Fri Apr 9 13:50:49 2010 -0600
5148 commit a832c7e9d9e9e420e1281136188bd53b34c56464
5149 Author: Bdale Garbee <bdale@gag.com>
5150 Date: Fri Apr 9 00:10:03 2010 -0600
5152 update changelogs for Debian build
5154 commit c0ee1ae25e1d18138d8372f47085de48ffada344
5155 Author: Bdale Garbee <bdale@gag.com>
5156 Date: Fri Apr 9 00:09:21 2010 -0600
5158 file changed by auto tools
5160 commit 25e69ebfec94560e0714cf2cc623dc9697b4ea99
5161 Author: Bdale Garbee <bdale@gag.com>
5162 Date: Fri Apr 9 00:08:32 2010 -0600
5164 update changelogs for Debian build
5166 commit ea5d4f01d18d93d032f05933041b7b6881289780
5167 Author: Keith Packard <keithp@keithp.com>
5168 Date: Thu Apr 8 22:45:04 2010 -0700
5170 libflite may forget to reference libasound
5172 commit 4b02f293e9c32a568fad89558274f21157e7d473
5173 Author: Bdale Garbee <bdale@gag.com>
5174 Date: Thu Apr 8 20:08:07 2010 -0600
5176 update changelogs for Debian build
5178 commit 5c3b6e2d1989bcaa19ae3e294f297ec3e5648a53
5179 Author: Bdale Garbee <bdale@gag.com>
5180 Date: Thu Apr 8 19:56:40 2010 -0600
5182 update changelogs for Debian build
5184 commit 01e524f11a67390a8ea1f20aa2d611909b4da363
5185 Author: Bdale Garbee <bdale@gag.com>
5186 Date: Thu Apr 8 19:55:05 2010 -0600
5188 choose a better set of docbook xsl files
5190 commit f93c9bf3695862db31f2c3b3bc5a7bb24ef3766c
5191 Author: Keith Packard <keithp@keithp.com>
5192 Date: Thu Apr 8 17:28:17 2010 -0700
5194 When changing RESET line, delay 20ms
5196 The GPS data sheet suggests a 1uF cap on the reset line to ensure it
5197 is held low long enough for the power supply to come up to voltage. TM
5198 v1.0 loads a 0.001uF cap there, but in case that isn't large enough,
5199 it could be replaced with the larger one. This change makes sure that
5200 even with that larger value, the debugging link will be able to reset
5203 Signed-off-by: Keith Packard <keithp@keithp.com>
5205 commit baaaac499cfbc1286ae55374cfdc796d32983b92
5206 Merge: a4356b9 dec9971
5207 Author: Keith Packard <keithp@keithp.com>
5208 Date: Thu Apr 8 13:31:23 2010 -0700
5210 Merge remote branch 'origin/master'
5212 commit a4356b9bcf679c4d7b88fbbad77a98ecb0f80098
5213 Author: Keith Packard <keithp@keithp.com>
5214 Date: Thu Apr 8 13:30:16 2010 -0700
5216 Use 16-bit flite voice (which appears to have changed symbols recently)
5218 commit 447c121fc1ceb878e45718ad1364a5349965a59a
5219 Merge: 10330d2 53ca3f9
5220 Author: Keith Packard <keithp@keithp.com>
5221 Date: Thu Apr 8 11:46:56 2010 -0700
5223 Merge remote branch 'origin/master' into altosui
5225 commit dec9971d70f17067ba0051206851b49c7604ac85
5226 Author: Bdale Garbee <bdale@gag.com>
5227 Date: Thu Apr 8 12:43:03 2010 -0600
5229 update changelogs for Debian build
5231 commit 6629ec52def8917ad033847812a1adc4c3e9c947
5232 Author: Bdale Garbee <bdale@gag.com>
5233 Date: Thu Apr 8 12:42:47 2010 -0600
5235 lose the url entirely for now
5237 commit a1539a075a0cc79c9122fea878d9a20ee722a18c
5238 Author: Bdale Garbee <bdale@gag.com>
5239 Date: Thu Apr 8 12:41:42 2010 -0600
5241 update changelogs for Debian build
5243 commit 934434ffb3514fe9ff95692784750d7c5217a5d3
5244 Author: Bdale Garbee <bdale@gag.com>
5245 Date: Thu Apr 8 12:41:28 2010 -0600
5249 commit 8a067cd0eebbec313fc39086747ef618f2d1cf37
5250 Author: Bdale Garbee <bdale@gag.com>
5251 Date: Thu Apr 8 12:36:18 2010 -0600
5253 update changelogs for Debian build
5255 commit 05ad58389fa3814ecb56344bf4ec3a3e025920a2
5256 Author: Bdale Garbee <bdale@gag.com>
5257 Date: Thu Apr 8 12:34:54 2010 -0600
5259 need another build dep
5261 commit 6fbdc7037db185f03bd5ff96b9d9320646572df7
5262 Author: Bdale Garbee <bdale@gag.com>
5263 Date: Thu Apr 8 12:28:49 2010 -0600
5265 update changelogs for Debian build
5267 commit 8f1d47e9cd61738e516d15fc97d5730d80611e87
5268 Author: Bdale Garbee <bdale@gag.com>
5269 Date: Thu Apr 8 12:28:20 2010 -0600
5271 update changelogs for Debian build
5273 commit 10330d23518c94a8b791193a97a6cc07b1c9a97c
5274 Author: Keith Packard <keithp@keithp.com>
5275 Date: Tue Apr 6 00:58:00 2010 -0700
5277 Enable telemetry monitoring
5279 Signed-off-by: Keith Packard <keithp@keithp.com>
5281 commit 9e10e43eff9de3f034da49c4f88728fb933f5035
5282 Author: Keith Packard <keithp@keithp.com>
5283 Date: Tue Apr 6 00:56:57 2010 -0700
5285 Tasks may move in task structure as a result of ao_exit
5287 Signed-off-by: Keith Packard <keithp@keithp.com>
5289 commit a7fc7901cd591c93d9d0cffeec2977ebb17554d4
5290 Author: Keith Packard <keithp@keithp.com>
5291 Date: Tue Apr 6 00:55:19 2010 -0700
5293 TD reports "not-connected" when GPS has 0 sats
5295 commit e064d05da87926c19fb665b40fb280fb59328183
5296 Author: Keith Packard <keithp@keithp.com>
5297 Date: Tue Apr 6 00:54:52 2010 -0700
5299 serial port read function cannot be interrupted. poll every 1 second
5301 commit c099a67d9ea37e731e0eca318102560281ac240f
5302 Author: Keith Packard <keithp@keithp.com>
5303 Date: Mon Apr 5 22:42:05 2010 -0700
5305 Interrupt running replay thread when starting another replay
5307 Signed-off-by: Keith Packard <keithp@keithp.com>
5309 commit cc600a0389720bc7e435dbda8bec080ef19e0c58
5310 Author: Keith Packard <keithp@keithp.com>
5311 Date: Mon Apr 5 22:21:46 2010 -0700
5313 Add Linux device discovery
5315 AltosDeviceLinux.java scans /proc to locate suitable devices. This
5316 will be hooked up to the UI shortly.
5318 commit c28646d72005daeadb70b95fd3b0050bd752cc55
5319 Author: Keith Packard <keithp@keithp.com>
5320 Date: Sun Apr 4 20:55:30 2010 -0700
5322 Switch TeleMetrum from v0.2 to v1.0
5324 Signed-off-by: Keith Packard <keithp@keithp.com>
5326 commit d22ba55ae0e056530a727df50f14ad853d79a2c8
5327 Author: Keith Packard <keithp@keithp.com>
5328 Date: Sun Apr 4 20:55:18 2010 -0700
5330 Clean up some altosui comments
5332 commit 6251e89c6eea655769f77bc18e98e79c99cf3cad
5333 Author: Keith Packard <keithp@keithp.com>
5334 Date: Sun Apr 4 19:54:46 2010 -0700
5336 Don't abort the radio when enabling telemetry monitoring
5338 If telemetry monitoring is already on, then there isn't any point, and
5339 if it's not on, then presumably there isn't any radio work to abort.
5341 Signed-off-by: Keith Packard <keithp@keithp.com>
5343 commit b0b99f30c4e00689e9faceb363a5c7284541c6be
5344 Author: Keith Packard <keithp@keithp.com>
5345 Date: Sun Apr 4 19:48:50 2010 -0700
5347 Make ao_radio_idle keep trying to get the radio to idle.
5349 Attempting to abort a radio operation could lead to a hang if the user
5350 of the radio jumped in and started using it again before the task
5351 attempting to abort woke up. This change just keeps smacking the radio
5352 until the radio goes idle long enough to detect it.
5354 commit 0e7abc9fedec568b431c983d3df1b0b29f4f10e3
5355 Author: Keith Packard <keithp@keithp.com>
5356 Date: Sun Apr 4 16:32:04 2010 -0700
5358 Use RXTX for serial comm. Add logdir preference saving
5360 commit c66eebad323e4572bb7cc23bc476ee144f03e9b8
5361 Author: Bdale Garbee <bdale@gag.com>
5362 Date: Sat Apr 3 08:02:44 2010 -0600
5364 rewrite urls in docbook format
5366 commit 3d34c488c5b71020d86f83156fd821fd860bf214
5367 Author: Keith Packard <keithp@keithp.com>
5368 Date: Sat Apr 3 00:02:44 2010 -0700
5372 commit 4bea4c327e002ce8f88218f0d840af7c1521bc35
5373 Author: Keith Packard <keithp@keithp.com>
5374 Date: Fri Apr 2 23:25:02 2010 -0700
5376 Remove unused cell renderer class
5378 commit 4ad062969ae8a608b8428620579bbe114e580a11
5379 Author: Keith Packard <keithp@keithp.com>
5380 Date: Fri Apr 2 23:20:38 2010 -0700
5382 Remove GPS data missing from skytraq. Save max height/accel/speed
5384 commit ebd49d4ec6b0b60c85b2de45cfe2e36add8fe9bf
5385 Author: Keith Packard <keithp@keithp.com>
5386 Date: Fri Apr 2 23:05:40 2010 -0700
5388 Report current gps nsat, not last locked nsat
5390 commit 3f9b66b307ee88172151e3bee58e50f5acbde109
5391 Author: Keith Packard <keithp@keithp.com>
5392 Date: Fri Apr 2 23:00:30 2010 -0700
5394 Clean up GPS data formatting
5396 commit 9cc48698ec14c34d437baad7b6540edc31e9741c
5397 Author: Keith Packard <keithp@keithp.com>
5398 Date: Fri Apr 2 22:47:40 2010 -0700
5402 commit 6d523ee4dad3b9890d3cf05852459101fe7e26ea
5403 Author: Keith Packard <keithp@keithp.com>
5404 Date: Fri Apr 2 21:48:41 2010 -0700
5408 commit caa0bf49668344937483190d1c258bfa32971d19
5409 Author: Keith Packard <keithp@keithp.com>
5410 Date: Fri Apr 2 21:44:00 2010 -0700
5412 Fix up table formatting
5414 commit a579402f428dd6a0529505069d1846f70b83ab5d
5415 Author: Keith Packard <keithp@keithp.com>
5416 Date: Fri Apr 2 18:10:59 2010 -0700
5418 Display table of flight info. gps is not working yet though
5420 commit 65079f84ea64220fa928c3ad96652fed159bf74b
5421 Author: Keith Packard <keithp@keithp.com>
5422 Date: Fri Apr 2 16:07:40 2010 -0700
5424 Steal C code from ao-view
5426 commit 02f2be90879b682b6e648cf2debc83223d127b9d
5427 Author: Keith Packard <keithp@keithp.com>
5428 Date: Fri Apr 2 13:37:52 2010 -0700
5430 Add telem parsing code
5432 commit 8c600abf87c95f8f214b5e56ff6eab955795dff5
5433 Author: Bdale Garbee <bdale@gag.com>
5434 Date: Thu Apr 1 23:56:47 2010 -0600
5436 crudely incorporate "day in the life" info from web page
5438 commit 53ca3f98aeb70cb780031fee788de950e4388cf6
5439 Author: Bdale Garbee <bdale@gag.com>
5440 Date: Thu Apr 1 23:39:42 2010 -0600
5442 tweak copyright assertion
5444 commit 6454e309858aeef7912e862de8632618d89b4205
5445 Author: Keith Packard <keithp@keithp.com>
5446 Date: Thu Apr 1 18:31:14 2010 -0700
5448 Fix windows install file
5450 commit 584ab100640a07dec6e06829e73b7260d17d2232
5451 Author: Keith Packard <keithp@keithp.com>
5452 Date: Thu Apr 1 18:30:56 2010 -0700
5454 Add Windows install .inf file
5456 commit a06bee96e648d9ded8776f3d6cba9505e7be1a60
5457 Author: Keith Packard <keithp@keithp.com>
5458 Date: Wed Mar 31 23:05:03 2010 -0700
5460 Add telemetry data parsing code
5462 commit 7f233369e32c3254165ee251df0a3dbc21ea5a29
5463 Author: Keith Packard <keithp@keithp.com>
5464 Date: Wed Mar 31 13:49:54 2010 -0700
5466 Start adding java-based UI
5468 commit 76768804e68ed09421d7a48cb0b390f102ce2d76
5469 Author: Bdale Garbee <bdale@gag.com>
5470 Date: Tue Mar 30 23:26:35 2010 -0600
5474 commit eb3cc3e9b60ec23acbb7d797affa743d671801ab
5475 Author: Bdale Garbee <bdale@gag.com>
5476 Date: Tue Mar 30 23:19:48 2010 -0600
5478 update changelogs for Debian build
5480 commit 00f49c8fb0aa38331360bdb85c32bcebe60dcdc3
5481 Author: Bdale Garbee <bdale@gag.com>
5482 Date: Tue Mar 30 23:19:07 2010 -0600
5486 commit f03ed0876c67b58624abf0c14bf73444b0322d3c
5487 Author: Bdale Garbee <bdale@gag.com>
5488 Date: Tue Mar 30 23:18:37 2010 -0600
5490 update changelogs for Debian build
5492 commit b41e617080fe825f7810ee5eee52ea37f7618ec6
5493 Merge: 28e40cc df7bda1
5494 Author: Bdale Garbee <bdale@gag.com>
5495 Date: Tue Mar 30 23:15:32 2010 -0600
5497 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
5502 commit 28e40ccfcd80ab8764d4aa235257cea4d193a0c1
5503 Author: Bdale Garbee <bdale@gag.com>
5504 Date: Tue Mar 30 23:14:47 2010 -0600
5506 update changelogs for Debian build
5508 commit 20d4d410e0fc04fe192e309811eed6c0194fa5a8
5509 Author: Bdale Garbee <bdale@gag.com>
5510 Date: Tue Mar 30 23:11:40 2010 -0600
5512 initial harness for documentation
5514 commit 9801ff7de21027935f52ccabaa3ff157e22d21ce
5515 Author: Bdale Garbee <bdale@gag.com>
5516 Date: Mon Mar 15 12:04:18 2010 -0600
5518 move gbp.conf into debian/
5520 commit df7bda1f32b0049c3878c325ea0b55999f3980e3
5521 Merge: 23da4f3 a7042fe
5522 Author: Keith Packard <keithp@keithp.com>
5523 Date: Fri Mar 12 10:38:26 2010 -0800
5525 Merge remote branch 'origin/master'
5527 commit 23da4f3bcdd1d780c9e1f6b68ad2fb309fcae6ba
5528 Author: Keith Packard <keithp@keithp.com>
5529 Date: Fri Mar 12 10:37:32 2010 -0800
5531 Document the ao-dumplog '--remote' flag for radio-link downloads
5533 The --remote (or -R) flag uses TeleDongle to fetch data over the radio
5534 command link from TeleMetrum. It's been there for a while, but the man
5535 page failed to mention it.
5537 Signed-off-by: Keith Packard <keithp@keithp.com>
5539 commit 93df98898f8cd199ae13158bc4f65e3494c954ad
5540 Author: Keith Packard <keithp@keithp.com>
5541 Date: Fri Mar 12 10:35:12 2010 -0800
5543 Round radio calibration value instead of truncating
5545 The radio calibration function in the bring-up code was truncating the
5546 radio calibration value which caused the resulting frequency to
5547 always measure above the target frequency, instead of trying to get as
5548 close as possible. This change will result in a closer frequency
5549 match, but may sometimes be below the target frequency.
5551 Signed-off-by: Keith Packard <keithp@keithp.com>
5553 commit a7042fe7d065d1da1252be5ad43e3c9856214dc8
5554 Author: Bdale Garbee <bdale@Deborah.(none)>
5555 Date: Fri Mar 5 19:11:11 2010 -0800
5557 update changelogs for Debian build
5559 commit eda5e1166a97766aa22561beaa1086ba4e19ee16
5560 Author: Bdale Garbee <bdale@gag.com>
5561 Date: Thu Mar 4 17:33:39 2010 -0700
5563 update changelogs for Debian build
5565 commit 6e61170d42936c18cd6efba6f4c14af616a30745
5566 Author: Keith Packard <keithp@keithp.com>
5567 Date: Sun Feb 28 18:24:46 2010 -0800
5569 Need to duplicate new altitude conversion code in aoview.
5571 Altitude conversion is now done with a smaller table and interpolation
5572 instead of a giant table.
5574 Signed-off-by: Keith Packard <keithp@keithp.com>
5576 commit e4e17e6d3844ae682a0e7a9469a522359bac77b6
5577 Author: Bdale Garbee <bdale@gag.com>
5578 Date: Sat Feb 27 17:36:13 2010 -0700
5580 update changelogs for Debian build
5582 commit a1478f65538fdaac7b58ffbd958a035b74956099
5583 Merge: 901fce5 bbf8c9f
5584 Author: Keith Packard <keithp@keithp.com>
5585 Date: Sat Feb 27 15:19:33 2010 -0800
5587 Merge remote branch 'origin/master'
5589 commit 901fce5fe3e2762406079ecaa787612b5ed4b34a
5590 Author: Keith Packard <keithp@keithp.com>
5591 Date: Sat Feb 27 15:18:47 2010 -0800
5593 Add .gitignore for ao-bringup
5595 Signed-off-by: Keith Packard <keithp@keithp.com>
5597 commit 7aab73a265841aac817ea34235dd1eb819debf76
5598 Author: Keith Packard <keithp@keithp.com>
5599 Date: Sat Feb 27 15:14:04 2010 -0800
5601 Fix up LED colors for each product.
5603 Different products assign different color LEDs to the two available
5604 LED drivers (P1_0, P1_1). Make the LED color pin assignments
5605 per-product (in ao_pins.h), then deal with not always having a green LED.
5607 Signed-off-by: Keith Packard <keithp@keithp.com>
5609 commit 1d6d8d76ec65373ffee70add75d183f5c4168f61
5610 Author: Keith Packard <keithp@keithp.com>
5611 Date: Sat Feb 27 15:11:44 2010 -0800
5613 Eliminate deadlock when writing config from radio link
5615 Writing the 'Saved\r\n' string would fill the packet buffer and cause
5616 a flush to occur, which would need to wait for the radio link to
5617 receive and transmit a packet. The radio link always re-fetches the
5618 radio channel number when lighting up the radio, so it need to look in
5619 the config space. If the config mutex was held by the config writing
5620 process while the radio was trying to get the channel number, then
5621 we'd get a deadlock.
5623 Signed-off-by: Keith Packard <keithp@keithp.com>
5625 commit f1956ebadd7bf46b84a05a0c383b6404ca26b344
5626 Author: Keith Packard <keithp@keithp.com>
5627 Date: Sat Feb 27 15:10:16 2010 -0800
5629 Leave .ihx files in the build directory too - easier to debug that way
5631 sdcdb wants the .ihx and .cdb files in the same directory, so humor it
5632 by copying the .ihx files to the src directory instead of moving them.
5634 Signed-off-by: Keith Packard <keithp@keithp.com>
5636 commit bbf8c9f1748af3f1fac08ddf80ae98da2e9b5727
5637 Author: Bdale Garbee <bdale@gag.com>
5638 Date: Fri Feb 26 15:21:12 2010 -0700
5640 create a turn on script for lighting up TeleDongle v0.2 boards
5642 commit 461d4a1948e112ec7353caf88967391d876469dd
5643 Author: Keith Packard <keithp@keithp.com>
5644 Date: Fri Feb 26 10:33:13 2010 -0800
5648 commit 5d7a3a5fbc0af4621c67a6fd51a9c9d5ae688fa5
5649 Author: Keith Packard <keithp@keithp.com>
5650 Date: Thu Feb 25 16:40:13 2010 -0800
5652 Fix and document the ao-rawload --run flag
5654 This allows ram-based programs to be loaded and executed easily.
5656 Signed-off-by: Keith Packard <keithp@keithp.com>
5658 commit 1e60deca147c85a064719dfad14ccabd1049bbbd
5659 Author: Keith Packard <keithp@keithp.com>
5660 Date: Thu Feb 25 16:33:34 2010 -0800
5662 Allow product names to have suffixes (like board revisions)
5664 When looking for a board by product name, just look at the prefix of
5665 the name instead of requiring an exact match. This will allow products
5666 to have board version suffixes.
5668 Signed-off-by: Keith Packard <keithp@keithp.com>
5670 commit f4d5790a284e2d02dd7568fbca90402fa5ed1aea
5671 Author: Keith Packard <keithp@keithp.com>
5672 Date: Thu Feb 25 16:32:57 2010 -0800
5674 Add ao_radio_xmit to help test boards without flashing them.
5676 Signed-off-by: Keith Packard <keithp@keithp.com>
5678 commit d7d551b0078acb1596a9b9023c3df6dbfa46213c
5679 Author: Bdale Garbee <bdale@gag.com>
5680 Date: Wed Feb 24 17:30:23 2010 -0700
5682 update changelogs for Debian build
5684 commit 2f45953ee54034209a23c254e65da36e44cf075f
5685 Author: Bdale Garbee <bdale@gag.com>
5686 Date: Wed Feb 24 17:29:47 2010 -0700
5690 commit 540f86678853e7ea80ae91f3f2ec0ec88c5b1ca7
5691 Author: Bdale Garbee <bdale@gag.com>
5692 Date: Wed Feb 24 17:27:51 2010 -0700
5696 commit cdccd92f6ed97be7385e84de5694064cb8f43946
5697 Author: Bdale Garbee <bdale@gag.com>
5698 Date: Wed Feb 24 17:25:28 2010 -0700
5700 conditionalize use of git on executability of /usr/bin/git binary
5702 commit 54dd7a200e6956aace5a580d4c4d6a10a13c654b
5703 Author: Bdale Garbee <bdale@gag.com>
5704 Date: Wed Feb 24 17:22:45 2010 -0700
5706 update changelogs for Debian build
5708 commit 4b6b28530206c6fdbe46699b81746fbbcab5b148
5709 Author: Bdale Garbee <bdale@gag.com>
5710 Date: Wed Feb 24 17:22:20 2010 -0700
5714 commit c74958d3e8c5ce8006a9f9f6853238fce0c77432
5715 Author: Bdale Garbee <bdale@gag.com>
5716 Date: Wed Feb 24 17:13:29 2010 -0700
5718 move git-using variable declaration into the prebuild target
5720 commit cf091a7252eba09902a42a3cfe7b4d6a343907ce
5721 Author: Bdale Garbee <bdale@gag.com>
5722 Date: Wed Feb 24 16:44:44 2010 -0700
5724 update changelogs for Debian build
5726 commit deccc10f0305c0cd02bf6317d6dc9d2ae38c3dac
5727 Author: Bdale Garbee <bdale@gag.com>
5728 Date: Wed Feb 24 16:43:32 2010 -0700
5730 add gawk as a build dependency since strtonum is a gawk extension
5732 commit ac45da6e61597dcdb119b976f7301b2cc7fdced4
5733 Author: Bdale Garbee <bdale@gag.com>
5734 Date: Wed Feb 24 14:57:26 2010 -0700
5736 update changelogs for Debian build
5738 commit 24912821b3230b8357b9e0094cd69fa0bccc5513
5739 Author: Bdale Garbee <bdale@gag.com>
5740 Date: Wed Feb 24 14:53:27 2010 -0700
5742 update changelogs for Debian build
5744 commit 82fdbfe1229d1ea5e6906ea240d54b3da73d9a69
5745 Author: Keith Packard <keithp@keithp.com>
5746 Date: Sat Feb 20 21:35:43 2010 -0800
5748 Must install .map files for ao-load to work
5750 ao-load uses the .map files to rewrite the serial number and other
5751 config parameters into the program flash.
5753 Signed-off-by: Keith Packard <keithp@keithp.com>
5755 commit a5215c2bd9249a285fc834db0c453fb3e7daed87
5756 Author: Keith Packard <keithp@keithp.com>
5757 Date: Sat Feb 20 21:20:05 2010 -0800
5759 Add back stack size checking to altos linking phase
5761 This verifies that the stack start specified during the compile
5762 will work with the resulting program
5764 Signed-off-by: Keith Packard <keithp@keithp.com>
5766 commit 18eeb79026f7e5c54bf99435537c024427011a36
5767 Author: Keith Packard <keithp@keithp.com>
5768 Date: Sat Feb 20 21:05:45 2010 -0800
5772 This borrows ideas from the notmuch project to reduce the command line
5773 clutter seen when compiling or linking stuff.
5775 Signed-off-by: Keith Packard <keithp@keithp.com>
5777 commit 004c2a9b7a4b44ef71ca60482573e8e9d8c6ce93
5778 Author: Keith Packard <keithp@keithp.com>
5779 Date: Sat Feb 20 20:36:08 2010 -0800
5781 Update .gitignore files
5783 commit 84c93bb2fc4558a5e4654794ba90e730a84eaf67
5784 Author: Keith Packard <keithp@keithp.com>
5785 Date: Sat Feb 20 20:22:16 2010 -0800
5787 Change altos build process to support per-product compile-time changes
5789 This creates per-product subdirectories and recompiles everything for
5790 each product, allowing per-product compile-time changes for things
5791 like peripheral pin assignments and attached serial devices.
5793 Signed-off-by: Keith Packard <keithp@keithp.com>
5795 commit fd0a42e0e96dcb8ecc9e999f70bcf70692692af9
5796 Author: Keith Packard <keithp@keithp.com>
5797 Date: Sat Feb 20 20:21:07 2010 -0800
5799 Change barometer conversion code to shrink conversion table
5801 commit 876e9a10b9096ead85fbe08ec9a6a0329cf7cbd4
5802 Author: Keith Packard <keithp@keithp.com>
5803 Date: Sat Feb 13 16:42:27 2010 -0800
5805 Log GPS data on pad after boost detect.
5807 This wakes up the two GPS reporting tasks and gets them to report out
5808 any existing GPS data to the log file. To make sure the timestamps in
5809 that GPS data are accurate, this also records GPS time on receipt of
5810 the GPS data instead of when that is logged.
5812 Signed-off-by: Keith Packard <keithp@keithp.com>
5814 commit c83615567b4567f3dc45a7f7b894943b45fbb65c
5815 Author: Keith Packard <keithp@keithp.com>
5816 Date: Sun Feb 7 00:25:22 2010 -0800
5818 Pull in a bit more data for filtering the start of the boost
5820 commit f8967607b3dda0c0ce7afe8bb077da2da5ed3dcd
5821 Author: Keith Packard <keithp@keithp.com>
5822 Date: Sun Feb 7 00:24:56 2010 -0800
5824 Compute daytime using GPS as time base
5826 commit 2a6350149407c7d2e7d143906c40c5e331248aeb
5827 Author: Keith Packard <keithp@keithp.com>
5828 Date: Thu Feb 11 18:48:56 2010 -0800
5830 Missing ao_mutex_put in gps_dump
5832 commit 9856b7c4397afcecc8f541af9a83824e817b3612
5833 Author: Keith Packard <keithp@keithp.com>
5834 Date: Sun Jan 10 16:31:50 2010 -0800
5836 Switch to using internal cc1111 temperature sensor
5838 v0.2 has no temperature sensor, and several of the v0.1 boards didn't
5839 get a temperature sensor loaded. Use the internal temperature sensor
5840 on the cc1111 in all cases instead.
5842 Signed-off-by: Keith Packard <keithp@keithp.com>
5844 commit 0c2533be15858774ef9381aa8c8344356fd5b971
5845 Author: Keith Packard <keithp@keithp.com>
5846 Date: Sat Jan 9 22:06:19 2010 -0800
5848 Force idle mode by shorting the SPI clock to ground at boot time.
5850 This allows you to override the flight mode detection code in case the
5851 accelerometer calibration is broken somehow. Hold the SPI clock shoted
5852 to ground until the LED comes on, then remove it.
5854 Signed-off-by: Keith Packard <keithp@keithp.com>
5856 commit 28346736a7799c0767e54511d9949cd61d35e471
5857 Author: Keith Packard <keithp@keithp.com>
5858 Date: Sat Jan 9 20:57:48 2010 -0800
5860 Add simple gps dump command 'g'
5862 This just dumps out the data in a very simple format to verify the GPS
5865 Signed-off-by: Keith Packard <keithp@keithp.com>
5867 commit a6082a8b4501ac4cb18584ace1f0c40e088e5484
5868 Author: Keith Packard <keithp@keithp.com>
5869 Date: Sat Jan 9 20:57:29 2010 -0800
5871 Remove flash debugging printfs
5873 Signed-off-by: Keith Packard <keithp@keithp.com>
5875 commit 05bb953830604721c9a49dd56256b86f3666b5ff
5876 Author: Keith Packard <keithp@keithp.com>
5877 Date: Sat Jan 9 20:42:57 2010 -0800
5879 Don't set ao_flash_setup_done until we're actually done.
5881 Because we're accessing this variable outside of the mutex, we need to
5882 make sure it isn't set until the data it covers has been initialized.
5884 Signed-off-by: Keith Packard <keithp@keithp.com>
5886 commit 327e5e782958e516a7b7a786ab6c176b0decb8b8
5887 Author: Keith Packard <keithp@keithp.com>
5888 Date: Sat Jan 9 20:04:42 2010 -0800
5890 Dump config block from read/write config and flash_status commands
5892 commit 05e5bb2d330b755967d06fb859585c81f5f5fbb5
5893 Author: Keith Packard <keithp@keithp.com>
5894 Date: Sat Jan 9 19:46:46 2010 -0800
5896 Dump more flash parameters for the flash_status command
5898 commit d4c8895b349998e02e03ed83466a0ca7afb3d99b
5899 Author: Keith Packard <keithp@keithp.com>
5900 Date: Sat Jan 9 17:57:52 2010 -0800
5902 Add 'f' command to display flash status register contents
5904 Signed-off-by: Keith Packard <keithp@keithp.com>
5906 commit c1334f712f01543adb10809bc1a3ca120e27290b
5907 Author: Keith Packard <keithp@keithp.com>
5908 Date: Sat Jan 9 09:55:04 2010 -0800
5910 Add at45db161d.h header file for new flash part.
5912 Forgot to add this when I added the driver.
5914 Signed-off-by: Keith Packard <keithp@keithp.com>
5916 commit a0d4c1b06d27e850d233f8ddf8fe32912bf0ec8f
5917 Author: Keith Packard <keithp@keithp.com>
5918 Date: Sat Jan 9 01:29:41 2010 -0800
5920 Remove green LED and temp sensor from v0.2 code
5922 Signed-off-by: Keith Packard <keithp@keithp.com>
5924 commit dc8d18736239b14c2ec48a40a01515912c5c25e6
5925 Author: Keith Packard <keithp@keithp.com>
5926 Date: Sat Jan 9 01:22:06 2010 -0800
5928 Add AT45DBxx1D driver
5930 This driver supports the AT45DB011D through AT45DB321D DataFlash
5931 parts as found in TeleMetrum v0.2
5933 Signed-off-by: Keith Packard <keithp@keithp.com>
5935 commit 3bab7e66d25988f5d63ec139c8814a85b983f8f3
5936 Author: Keith Packard <keithp@keithp.com>
5937 Date: Sat Dec 19 20:32:18 2009 -0800
5939 Remove dbg driver code from telemetrum/teledongle
5941 The only board with debug outputs is the TI dongle at this point, so
5942 the debug modules were disabled in TM and TD some time
5943 ago. Unfortunately, the code was not removed then.
5945 Signed-off-by: Keith Packard <keithp@keithp.com>
5947 commit eddb82390a0ecb07ef83c04861993842906b03ab
5948 Author: Keith Packard <keithp@keithp.com>
5949 Date: Sat Dec 19 15:31:36 2009 -0800
5951 Ensure that ao_alarm waits at least the specified time
5953 Because the timer tick may happen soon, it's important to delay by
5954 another tick to ensure that we don't wake up early.
5956 Signed-off-by: Keith Packard <keithp@keithp.com>
5958 commit 598d168bd6552c3756e4b0267de44147eadab9f6
5959 Author: Keith Packard <keithp@keithp.com>
5960 Date: Sat Dec 19 14:03:11 2009 -0800
5962 Disable monitor mode before attempting radio test.
5964 If monitor mode is left active, then the radio lock will not be able
5965 to be acquired for the radio test.
5967 Signed-off-by: Keith Packard <keithp@keithp.com>
5969 commit d4cf1446680d8b47396bcda338e8df7af395d102
5970 Author: Bdale Garbee <bdale@gag.com>
5971 Date: Sat Dec 19 13:53:38 2009 -0700
5973 update changelogs for Debian build
5975 commit 10d1bbcd9709a5eee8d50989215242b16feb7232
5976 Author: Keith Packard <keithp@keithp.com>
5977 Date: Sat Dec 19 11:34:16 2009 -0800
5979 Use ao_radio_get/ao_radio_put in packet code.
5981 The ao_radio_get function both acquires the mutex *and* configures the
5982 radio channel and frequency. Failing to use this in the packet code
5983 would leave the radio frequency unconfigured.
5985 Signed-off-by: Keith Packard <keithp@keithp.com>
5987 commit a15abc1882a3bdd2c980eed169f3b80337528390
5988 Author: Bdale Garbee <bdale@gag.com>
5989 Date: Sat Dec 19 12:15:29 2009 -0700
5991 update changelogs for Debian build
5993 commit bbb152c712801653374a8f82869e2e8bf41f7279
5994 Author: Bdale Garbee <bdale@gag.com>
5995 Date: Sat Dec 19 12:05:40 2009 -0700
5997 update changelogs for Debian build
5999 commit 7ac8efea5d60b81adccdc1e38ac4c13facfae7c9
6000 Author: Keith Packard <keithp@keithp.com>
6001 Date: Tue Dec 15 23:58:29 2009 -0800
6003 Add --cal to man page
6005 commit 5481082b18226a0de6b377215b3b330bdbc4a6c6
6006 Author: Keith Packard <keithp@keithp.com>
6007 Date: Sat Dec 5 19:50:38 2009 -0800
6009 Allow radio calibration to be set from ao-load
6011 This moves the initial radio calibration value into const memory where
6012 it will be used if no eeprom configuration value is available, either
6013 on an unprogrammed board with eeprom or a device without an eeprom.
6015 Signed-off-by: Keith Packard <keithp@keithp.com>
6017 commit 46f03ab3145a61139c8ca6fc99e8f2798728b5a9
6018 Author: Keith Packard <keithp@keithp.com>
6019 Date: Sat Dec 5 15:36:12 2009 -0800
6021 Re-order config values. Change frequency to cal
6023 Place more often used values at top, and consistently call the radio
6024 value 'calibration' instead of 'frequency'.
6026 Signed-off-by: Keith Packard <keithp@keithp.com>
6028 commit bf29a62532fec12e6af2d2f3a6624882c863e933
6029 Author: Bdale Garbee <bdale@gag.com>
6030 Date: Sat Dec 5 11:03:42 2009 -0700
6032 update changelogs for Debian build
6034 commit cd49847f3125df1733f298b56a43e8027ab5ce05
6035 Author: Keith Packard <keithp@keithp.com>
6036 Date: Fri Dec 4 23:38:26 2009 -0800
6038 Add radio calibration configuration.
6040 The crystal we use is only good for 20ppm, which generates a fairly
6041 significant error bounds at our RF frequency. This commit adds a
6042 configuration variable that sets the RF frequency control variable so
6043 that the output frequency can be adjusted.
6045 Signed-off-by: Keith Packard <keithp@keithp.com>
6047 commit c671a3f31f54715284beef5baa4a72ca922e4018
6048 Author: Keith Packard <keithp@keithp.com>
6049 Date: Fri Dec 4 23:36:54 2009 -0800
6051 Make ao_cmd_decimal produce both 32 and 16 bit values.
6053 ao_cmd_lex_u32 is produced in addition to ao_cmd_lex_i so that
6054 functions can easily read 32-bit values from the command line.
6056 Signed-off-by: Keith Packard <keithp@keithp.com>
6058 commit e6d6ad66ce177eb6e49eaa04b1ecc6426f4bbdbf
6059 Author: Keith Packard <keithp@keithp.com>
6060 Date: Fri Dec 4 23:35:40 2009 -0800
6062 Remove send_serial and serial_baud commands.
6064 No longer useful, and they take up space.
6066 Signed-off-by: Keith Packard <keithp@keithp.com>
6068 commit ce7325cefbbe91054c1e8174cf40a6c687f6694b
6069 Author: Bdale Garbee <bdale@gag.com>
6070 Date: Fri Dec 4 21:02:07 2009 -0700
6072 update changelogs for Debian build
6074 commit 9a1d7dd78c07d18954ef620b6ed25d6701df21e2
6075 Author: Keith Packard <keithp@keithp.com>
6076 Date: Fri Dec 4 14:35:39 2009 -0800
6078 Change default callsign to "N0CALL"
6080 commit 291e2004e77debdc1543912cf11043c849305de8
6081 Author: Bdale Garbee <bdale@gag.com>
6082 Date: Thu Nov 26 11:18:37 2009 -0700
6084 update changelogs for Debian build
6086 commit 40533095a96b6c6364eebdc4b7d53c4eabe72e9a
6087 Author: Bdale Garbee <bdale@gag.com>
6088 Date: Thu Nov 26 11:16:04 2009 -0700
6090 update changelogs for Debian build
6092 commit ab1075e7219b02258c1613d93379582be4168947
6093 Author: Bdale Garbee <bdale@gag.com>
6094 Date: Thu Nov 26 11:15:13 2009 -0700
6096 change home URL in control file to be the AltOS page
6098 commit d34dcc5f3616e59ee90ed172770fe2a3eb1e0cac
6099 Author: Bdale Garbee <bdale@gag.com>
6100 Date: Thu Nov 26 10:40:07 2009 -0700
6102 fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
6104 commit ea40561b36519a5dcabedabe18672b79ea5e9993
6105 Author: Bdale Garbee <bdale@gag.com>
6106 Date: Sun Nov 22 10:18:44 2009 -0700
6108 update changelogs for Debian build
6110 commit d6ba07e885bdc62ba64719c9d8cc42fcecbcb09d
6111 Author: Keith Packard <keithp@keithp.com>
6112 Date: Sun Nov 22 01:10:44 2009 -0800
6114 Automatically extract flight number for eeprom and telem filenames.
6116 Extract flight number from either telemetry or eeprom files and use
6117 that in the resulting filenames. To ensure that files remain unique,
6118 add a new field, -seq-%03d. This is appended only when the sequence
6119 number is non-zero as it shouldn't occur in normal usage.
6121 This also eliminates some duplicate filename creation code in the
6122 library and aoview sources.
6124 Signed-off-by: Keith Packard <keithp@keithp.com>
6126 commit 06cebd1026dc1bd6ee51526fa2d02905df3b3b37
6127 Author: Keith Packard <keithp@keithp.com>
6128 Date: Sun Nov 22 00:52:58 2009 -0800
6130 ao-postflight: don't try to use missing gps sat data
6132 Signed-off-by: Keith Packard <keithp@keithp.com>
6134 commit a9ada1b538af3308e1b22bd024d9204521184173
6135 Author: Keith Packard <keithp@keithp.com>
6136 Date: Sat Nov 21 22:12:21 2009 -0800
6138 ao-postflight: compute barometric alt for each GPS position
6140 Print that to the --gps file, and use that in the --kml file for the
6141 altitude. Gives a very different picture of our flight tracks,
6142 presumably far more accurate (at least in altitude).
6144 Signed-off-by: Keith Packard <keithp@keithp.com>
6146 commit b84b634d9ae8ce6ab1c02833a3ed8514404e1ca3
6147 Author: Keith Packard <keithp@keithp.com>
6148 Date: Sat Nov 21 22:11:45 2009 -0800
6150 Don't crash if --plot isn't passed on ao-postflight command line
6152 Crashing is not nice.
6154 Signed-off-by: Keith Packard <keithp@keithp.com>
6156 commit 2d77c18b15834046b7b79d49d87211828f2409e9
6157 Author: Keith Packard <keithp@keithp.com>
6158 Date: Sat Nov 21 21:10:09 2009 -0800
6160 Convert telemetry file GPS satellite information in cc_log_read
6162 The satellite info wasn't being correctly converted from telemetry
6163 files to the data log structure, so ao-postflight was not seeing it.
6165 Signed-off-by: Keith Packard <keithp@keithp.com>
6167 commit 1e7fb61700f1f6f2ed5fdbc4380d7187b0cd187b
6168 Author: Keith Packard <keithp@keithp.com>
6169 Date: Sat Nov 21 21:09:03 2009 -0800
6171 Fix --plot arg handling. Add -all option.
6173 The --plot file name handing is special as the library wants a
6174 filename instead of a stdio file pointer.
6176 Add a --all option that just creates all of the possible outputs.
6178 Signed-off-by: Keith Packard <keithp@keithp.com>
6180 commit 199f0cecae22645140185238682b9e1aba0e5715
6181 Author: Keith Packard <keithp@keithp.com>
6182 Date: Sat Nov 21 20:36:20 2009 -0800
6184 Make TD print 0000-00-00 for invalid dates.
6186 This 'shouldn't' happen, but in case it does, I want to know about it.
6188 Signed-off-by: Keith Packard <keithp@keithp.com>
6190 commit 238d03462a56dc1b7c871608cb00f961a88c1b97
6191 Author: Keith Packard <keithp@keithp.com>
6192 Date: Sat Nov 21 20:35:22 2009 -0800
6194 Make ao-postflight create filenames using input filenames.
6196 Instead of requiring the user to provide names for the various output
6197 options, just create them from the input name by replacing the extension.
6199 Signed-off-by: Keith Packard <keithp@keithp.com>
6201 commit 1a3b4c02a01187f8b7b9a9c97712476d0007ab35
6202 Author: Keith Packard <keithp@keithp.com>
6203 Date: Sat Nov 21 19:52:26 2009 -0800
6205 Document ao-postflight --gps and --kml options.
6207 These were missing from the man page, but included in the --help output.
6209 Signed-off-by: Keith Packard <keithp@keithp.com>
6211 commit 80b23f3044a654d61212891a61fadb8a3a4e5572
6212 Author: Keith Packard <keithp@keithp.com>
6213 Date: Sat Nov 21 18:57:45 2009 -0800
6215 Decode HDOP data from skytraq GPS
6217 The hdop data was getting dropped on the floor, but is rather useful
6218 when deciding if the GPS position is crazy or not. This reports HDOP *
6219 5 (giving a useful range of .2-50).
6221 Signed-off-by: Keith Packard <keithp@keithp.com>
6223 commit 8f036ee7cd30ce3ed2e5cc8501914a4c19b73875
6224 Author: Bdale Garbee <bdale@gag.com>
6225 Date: Fri Nov 20 13:19:02 2009 -0700
6227 update changelogs for Debian build
6229 commit 87e6f3e5c1688503ab8595912d8d6eb7139830b7
6230 Author: Keith Packard <keithp@keithp.com>
6231 Date: Fri Nov 20 12:16:37 2009 -0800
6233 Eliminate SiRF state values from ao-view.
6235 With Skytraq not having any visible GPS state information, just
6236 remove this from the display.
6238 Signed-off-by: Keith Packard <keithp@keithp.com>
6240 commit 8065b8146a31438e66f83c13b99281ec47439a73
6241 Author: Keith Packard <keithp@keithp.com>
6242 Date: Fri Nov 20 11:56:48 2009 -0800
6244 Add GPS date/time output to ao-postflight.
6246 GPS date/time information was already being stored in the log, it just
6247 wasn't getting displayed by ao-postflight.
6249 Signed-off-by: Keith Packard <keithp@keithp.com>
6251 commit 6894541e0ee144bfc689cc02d4ed333711d3b500
6252 Author: Keith Packard <keithp@keithp.com>
6253 Date: Fri Nov 20 11:55:28 2009 -0800
6255 Reduce igniter firing time from 500ms to 50ms.
6257 Given that the system will brown-out with the longer pulse, it doesn't
6258 make sense to even try; failure at 50ms probably indicates a short.
6260 Signed-off-by: Keith Packard <keithp@keithp.com>
6262 commit b75aa1c825b84bd7fa1578320fbc7e904c373a7d
6263 Author: Bdale Garbee <bdale@gag.com>
6264 Date: Thu Nov 19 21:43:13 2009 -0700
6268 commit c2f661b75ec035f6a3f700962290ef297f9ab0af
6269 Author: Bdale Garbee <bdale@gag.com>
6270 Date: Fri Nov 20 11:44:06 2009 -0700
6272 update changelogs for Debian build
6274 commit b0d7e3f9c9322542e9b649bb6ad7f7e5bb99dffa
6275 Author: Keith Packard <keithp@keithp.com>
6276 Date: Sun Nov 15 16:20:18 2009 -0800
6278 Stop using SiRF state info.
6280 With the switch to the skytraq GPS unit, we don't have the same level
6281 of detail in the GPS stream, so stop reporting that in the telemetry
6282 stream, in the UI and writing it to eeprom.
6284 Signed-off-by: Keith Packard <keithp@keithp.com>
6286 commit 524665fc221b0d483453c67b7211e282cebc8980
6287 Author: Keith Packard <keithp@keithp.com>
6288 Date: Sun Nov 15 16:04:41 2009 -0800
6290 Add date to GPS data, captured from GPRMC packet.
6292 Pull the date out of the GPS stream and send it over the telemetry
6293 link and write it to the eeprom.
6295 Signed-off-by: Keith Packard <keithp@keithp.com>
6297 commit 3ee279ba76c2a79d142c466f19ef758cf4c01d70
6298 Author: Keith Packard <keithp@keithp.com>
6299 Date: Sun Nov 15 15:59:01 2009 -0800
6301 Add flight number to telemetry stream.
6303 This makes it easier to tie the telemetry and eeprom files together as
6304 they're now both labeled with serial and flight numbers, which should
6307 Signed-off-by: Keith Packard <keithp@keithp.com>
6309 commit 6391c89bd5b89f5f46255b8365c658a873e5959a
6310 Author: Keith Packard <keithp@keithp.com>
6311 Date: Sun Nov 15 15:53:01 2009 -0800
6313 Switch order of serial/flight in ao-postflight summary
6315 commit 9b06e294e2777f69bcf5e98789c3f5477097d53b
6316 Author: Keith Packard <keithp@keithp.com>
6317 Date: Sun Nov 15 15:51:58 2009 -0800
6319 Enable telemetry receive in ao_view
6321 commit 4cffc9c4b079e39c8196ddbaf91129cda6df7f8b
6322 Author: Keith Packard <keithp@keithp.com>
6323 Date: Sat Nov 14 22:24:37 2009 -0800
6325 Share telemetry parsing code in cc library.
6327 ao-view had a private copy of the telemetry parsing code which
6328 included the ability to parse the newer version of that file. Those
6329 changes have been moved to the library version and the private copy removed.
6331 Signed-off-by: Keith Packard <keithp@keithp.com>
6333 commit 0e0db8ca3af4c07bae909938486766c646bf580b
6334 Author: Keith Packard <keithp@keithp.com>
6335 Date: Sat Nov 14 22:24:09 2009 -0800
6337 Provide a dummy 'uninstall' target in the src directory.
6339 Signed-off-by: Keith Packard <keithp@keithp.com>
6341 commit 1c654a9369294c9b8066c33f91161d8005b96680
6342 Author: Keith Packard <keithp@keithp.com>
6343 Date: Sat Nov 14 22:17:24 2009 -0800
6345 Loosen tolerances for main->landed transition
6347 Detecting that the rocket has landed is required for the system to
6348 flush the eeprom log and re-enable the RDF beacon. This patch changes
6349 the landed state entry requirements for the accelerometer to require
6350 only that the accelerometer stay within a quarter of a g (down from
6351 1/10g) and changes the testing interval from 20 seconds to 5
6354 The requirement that the barometric altitude be within 1000m of the
6355 launch altitude and that the barometer change by no more than 0.05kPa
6358 Signed-off-by: Keith Packard <keithp@keithp.com>
6360 commit 03092d1a72a9651711e22c58dca6d6aba5705c5e
6361 Author: Keith Packard <keithp@keithp.com>
6362 Date: Sat Nov 14 16:35:12 2009 -0800
6364 ao-postflight: fix sloppy gps sat data realloc code (was crashing).
6366 Realloc'ing the wrong data, and failing to set the realloc'ed size was
6367 causing ao-postflight to crash while reading long logs.
6369 Signed-off-by: Keith Packard <keithp@keithp.com>
6371 commit adf656192441eb7f44792955c86e469145477e29
6372 Author: Keith Packard <keithp@keithp.com>
6373 Date: Thu Nov 5 22:11:59 2009 -0800
6375 Return radio to telemetry settings when packet system closed.
6377 To receive telemetry after disabling the packet system, the radio must
6378 be reconfigured for telemetry mode.
6380 Signed-off-by: Keith Packard <keithp@keithp.com>
6382 commit 83afdbdc154fe013bfe35ce5ecf1d61570b04ed6
6383 Author: Keith Packard <keithp@keithp.com>
6384 Date: Thu Nov 5 21:45:00 2009 -0800
6388 This resets the processor using the watchdog timer.
6390 Signed-off-by: Keith Packard <keithp@keithp.com>
6392 commit 0358988ac0ee25a564d48af79b1c3fb0c0fe0a88
6393 Author: Keith Packard <keithp@keithp.com>
6394 Date: Thu Nov 5 21:44:31 2009 -0800
6396 Add Watchdog Timer Control register definitions
6398 Signed-off-by: Keith Packard <keithp@keithp.com>
6400 commit 4114210e0b813f4af99d0cb7755ad2ac2c4b120e
6401 Author: Keith Packard <keithp@keithp.com>
6402 Date: Thu Nov 5 21:43:21 2009 -0800
6404 Move ao_match_word from ao_ignite.c to ao_cmd.c
6406 This is a generally useful command line utility.
6408 Signed-off-by: Keith Packard <keithp@keithp.com>
6410 commit 5a79a04ddb0b3ee64de34e366f71a0f6db509c01
6411 Author: Keith Packard <keithp@keithp.com>
6412 Date: Wed Nov 4 21:59:51 2009 -0800
6414 Stop recording in ao-dumplog after receiving an invalid block
6416 If no samples in a block are valid, assume the flight log is over.
6418 Signed-off-by: Keith Packard <keithp@keithp.com>
6420 commit 843ee489aac34ad6d81f55f1c85fb9eecc42d86b
6421 Author: Keith Packard <keithp@keithp.com>
6422 Date: Wed Nov 4 21:59:12 2009 -0800
6424 Flush pending input when switching to remote packet mode
6426 Any pending input would just confuse the application, so pull it off
6427 the link and dump it.
6429 Signed-off-by: Keith Packard <keithp@keithp.com>
6431 commit 036400a2db303f3db3be7cc0426f88359c6bd2b1
6432 Author: Keith Packard <keithp@keithp.com>
6433 Date: Wed Nov 4 21:42:51 2009 -0800
6435 Explicitly use USB I/O routines in packet code
6437 Using the implicit stdio functions (putchar/getchar/flush) would
6438 result in essentially random redirection of each, depending on whether
6439 the packet code had characters available when getchar was called. This
6440 would cause lockups in putchar.
6442 Signed-off-by: Keith Packard <keithp@keithp.com>
6444 commit 3ece984f4d72b4f720a5efdfaad7cff77a93d676
6445 Author: Keith Packard <keithp@keithp.com>
6446 Date: Wed Nov 4 21:32:07 2009 -0800
6448 In USB pollchar, wait for packet before re-checking USB out len
6450 This probably wouldn't actually cause a problem, but it seems more
6451 reliable to wait for a packet interrupt before re-reading the packet
6452 OUT len register. This could avoid spinning while waiting for a USB
6453 packet, which seems like a good thing.
6455 Signed-off-by: Keith Packard <keithp@keithp.com>
6457 commit bc62bb254085cc705203b57260c04ac5e14c6611
6458 Author: Keith Packard <keithp@keithp.com>
6459 Date: Wed Nov 4 21:29:37 2009 -0800
6461 In packet master, move USB flush from packet thread to echo thread
6463 This keeps the packet thread from blocking on USB and also makes the
6464 flush happen after every packet (slightly more USB traffic, but
6465 packets are slow anyway).
6467 Signed-off-by: Keith Packard <keithp@keithp.com>
6469 commit 27ebaf8e13aed06bb1ea6e770f767495a02be6c5
6470 Author: Keith Packard <keithp@keithp.com>
6471 Date: Tue Nov 3 01:27:37 2009 -0800
6473 Add ability to dump eeprom data over radio link.
6475 This adds a '-R' option to ao-dumplog to redirect the connection
6476 through a USB attached TeleDongle over the radio link to a remote
6479 Signed-off-by: Keith Packard <keithp@keithp.com>
6481 commit 1de322b960005c9a16051afa1881fadb00f4bcd6
6482 Author: Keith Packard <keithp@keithp.com>
6483 Date: Tue Nov 3 00:40:38 2009 -0800
6485 Pass accel calibration over telemetry stream. Telemetry data format change.
6487 This allows the ground station to convert the accelerometer sensor
6488 values into acceleration and speed data. This requires a new telemetry
6489 data structure, and so TeleMetrum and TeleDongle units must be updated
6490 synchronously. ao-view will parse either telemetry stream, and the
6491 serial format from TeleDongle now has a version number to allow for
6494 Signed-off-by: Keith Packard <keithp@keithp.com>
6496 commit b529e5e8998702986909111a457f3ce9932e1ccf
6497 Author: Keith Packard <keithp@keithp.com>
6498 Date: Mon Nov 2 23:48:29 2009 -0800
6500 ao_flight_test was using accel value for pressure too
6502 commit f57bea012d4fbca097df0d98fcd30eb4abd9701a
6503 Author: Keith Packard <keithp@keithp.com>
6504 Date: Mon Nov 2 21:47:41 2009 -0800
6506 Reformat ADC values to show all 16 bits
6508 commit 79718e798e96567f0ba11c61f187e432fdcf95ee
6509 Author: Keith Packard <keithp@keithp.com>
6510 Date: Mon Nov 2 21:48:16 2009 -0800
6514 commit a4137263b69864c524d39c6ff88a0225fd06e79b
6515 Author: Keith Packard <keithp@keithp.com>
6516 Date: Mon Nov 2 21:47:15 2009 -0800
6520 commit 47f510464907d2b9488109c96ade87a41d878842
6521 Author: Keith Packard <keithp@keithp.com>
6522 Date: Mon Nov 2 21:46:39 2009 -0800
6524 Remove "l" command as ao-dumplong no longer uses it
6526 commit 144db05f6b286a0450d486f69ce192632a2c0656
6527 Author: Keith Packard <keithp@keithp.com>
6528 Date: Mon Nov 2 21:38:18 2009 -0800
6530 Add two-point accelerometer calibration.
6532 Calibration now uses two values, one upside right and the other upside
6533 down instead of a single horizontal value. This allows the use of
6534 other accelerometers and compensates for variations in the divider
6535 circuit to provide more accurate data.
6537 commit 17611788aadc9460287145a340a7c18bf63766aa
6538 Author: Bdale Garbee <bdale@gag.com>
6539 Date: Mon Nov 2 16:54:06 2009 -0700
6541 update changelogs for Debian build
6543 commit 7db9d86178ecfd58cc1c17ac9fcbdcfd2f13aaec
6544 Merge: b219801 f9de200
6545 Author: Keith Packard <keithp@keithp.com>
6546 Date: Mon Nov 2 15:47:40 2009 -0800
6548 Merge remote branch 'origin/master'
6550 commit b219801fb0e5eaff7778d21701da977104522da3
6551 Author: Keith Packard <keithp@keithp.com>
6552 Date: Mon Nov 2 15:45:58 2009 -0800
6554 Add ao_usb_pollchar to ao.h
6556 commit b92333ff5e75bf96804359e9fbf464d3b518bd95
6557 Author: Keith Packard <keithp@keithp.com>
6558 Date: Mon Nov 2 15:45:42 2009 -0800
6560 Disable interrupts while removing tasks from task list
6562 commit d519564fd08d2defe1211de83ccbdfa3c7cfe702
6563 Author: Keith Packard <keithp@keithp.com>
6564 Date: Mon Nov 2 15:45:07 2009 -0800
6566 Add more docs to the README file
6568 commit f9de20000794c97a04d5bc2476191864bd2af371
6569 Author: Bdale Garbee <bdale@gag.com>
6570 Date: Mon Nov 2 16:00:11 2009 -0700
6572 update changelogs for Debian build
6574 commit 127c3125e5a4b86b8f304bc2889e313688c3d83e
6575 Author: Bdale Garbee <bdale@gag.com>
6576 Date: Mon Nov 2 15:59:12 2009 -0700
6578 update changelogs for Debian build
6580 commit 6b1e77569e2fed3c44606ed268421df5d3ed4020
6581 Author: Bdale Garbee <bdale@gag.com>
6582 Date: Mon Nov 2 15:57:41 2009 -0700
6584 update changelogs for Debian build
6586 commit 8203bfa58af32a1d07a44c1c151b200df0b65f15
6587 Author: Bdale Garbee <bdale@gag.com>
6588 Date: Mon Nov 2 15:56:42 2009 -0700
6590 de-version the libreadline-dev build dependency
6592 commit 0b483233118673cbc2cda1be6acd379df82bc95a
6593 Merge: ca5d323 550482d
6594 Author: Keith Packard <keithp@keithp.com>
6595 Date: Sun Nov 1 20:59:02 2009 -0800
6597 Merge remote branch 'origin/master' into skytraq
6599 commit ca5d323a3d206050d95f52a61e92c69e1f54e7b5
6600 Author: Keith Packard <keithp@keithp.com>
6601 Date: Sun Nov 1 20:57:03 2009 -0800
6603 Enable packet-based communcation to command processor
6605 This splits the packet code into master/slave halves and hooks the
6606 slave side up to the getchar/putchar/flush logic in ao_stdio.c
6608 Signed-off-by: Keith Packard <keithp@keithp.com>
6610 commit 6c1a9ce16b966a21c885bf3be31cbcb85368b3fa
6611 Author: Keith Packard <keithp@keithp.com>
6612 Date: Sat Oct 31 01:30:22 2009 -0700
6614 No need to wakeup &ao_tick_count now
6616 commit cd0d495d7ef276956e730196476daa70a4359918
6617 Author: Keith Packard <keithp@keithp.com>
6618 Date: Sat Oct 31 01:20:26 2009 -0700
6620 Poke master to speed up packet rate when things are busy
6622 commit 442b1ef18c8320d4e5329dc92bb5268a36058fc5
6623 Author: Keith Packard <keithp@keithp.com>
6624 Date: Sat Oct 31 01:19:41 2009 -0700
6626 Use ao_alarm for ao_delay so it can be easily interrupted
6628 commit 4f7ed9ff484778381db647c27d2a34d0cadec41e
6629 Author: Keith Packard <keithp@keithp.com>
6630 Date: Fri Oct 30 23:53:03 2009 -0700
6632 Do more flushing in packet test code
6634 commit 6a7aa1810a90a9216160aec55ec4bd02b3240e1b
6635 Author: Keith Packard <keithp@keithp.com>
6636 Date: Fri Oct 30 23:52:44 2009 -0700
6640 commit bf65e0b2a1299b49adc2d339ab9d9c7599aded9e
6641 Author: Keith Packard <keithp@keithp.com>
6642 Date: Fri Oct 30 23:52:22 2009 -0700
6644 Send SYN packet to set sequence numbers
6646 commit d46797e5c08d4955d516458185e2cfb51ee2d567
6647 Author: Keith Packard <keithp@keithp.com>
6648 Date: Fri Oct 30 23:51:38 2009 -0700
6650 Use ao_radio_done to wait for TX to completely finish with packet
6652 commit c5ec6fcfa1bd17aad0f85d2fbe603f1d125836e6
6653 Author: Keith Packard <keithp@keithp.com>
6654 Date: Fri Oct 30 23:50:54 2009 -0700
6656 Switch packet code from timer thread to ao_alarm
6658 commit b428faf74ae145126ec1da972028fcfe0b4b2b18
6659 Author: Keith Packard <keithp@keithp.com>
6660 Date: Fri Oct 30 23:48:36 2009 -0700
6662 Remove reason from ao_dma_abort
6664 commit 73db30b2f9128c37dc7fa075793a8862814ce044
6665 Author: Keith Packard <keithp@keithp.com>
6666 Date: Fri Oct 30 23:46:21 2009 -0700
6670 commit 251b0971f049cbf2f8db79a32729d47441ce65f3
6671 Author: Keith Packard <keithp@keithp.com>
6672 Date: Fri Oct 30 23:45:43 2009 -0700
6674 Wait for TX to finish sending data
6676 commit 9b31f07fe3556896b3e997bba156e30ef5777a80
6677 Author: Keith Packard <keithp@keithp.com>
6678 Date: Fri Oct 30 23:43:52 2009 -0700
6680 Add radio carrier command
6682 commit 7b14c3e609749f4fc00dbd660541375048535218
6683 Author: Keith Packard <keithp@keithp.com>
6684 Date: Fri Oct 30 16:39:15 2009 -0700
6686 Initial packet bits. Just testing transmission
6688 commit 690fc263516d8beb6b24e86fbcd6588f42ce4e5c
6689 Author: Keith Packard <keithp@keithp.com>
6690 Date: Wed Oct 21 17:18:49 2009 +0900
6692 Add keyhole-markup generation for ao-postflight.
6694 This lets you see the flight path in googleearth.
6696 Signed-off-by: Keith Packard <keithp@keithp.com>
6698 commit b657aa209b9ea3b3efd33a940283b3ba60a169af
6699 Author: Keith Packard <keithp@keithp.com>
6700 Date: Fri Oct 16 12:59:53 2009 +0900
6702 Add ao_wake_task and ao_exit
6704 ao_wake_task signals a specific task to wake up.
6705 ao_exit terminates the current task.
6707 Signed-off-by: Keith Packard <keithp@keithp.com>
6709 commit d709a0688eff84e25e24d755850ef045d6b0c3de
6710 Author: Keith Packard <keithp@keithp.com>
6711 Date: Fri Oct 16 12:56:45 2009 +0900
6713 Save some DSEG space by marking cmd functions __reentrant
6715 __reentrant causes the compiler to place args and locals on the stack
6716 instead of in the data segment.
6718 Signed-off-by: Keith Packard <keithp@keithp.com>
6720 commit 550482d953c491a5ede9f2d243493afb13289898
6721 Author: Bdale Garbee <bdale@gag.com>
6722 Date: Mon Oct 12 16:58:46 2009 -0600
6724 update changelogs for Debian build
6726 commit 2de548f45d0f50b558acc83f57e1e2fc1223ab92
6727 Author: Bdale Garbee <bdale@gag.com>
6728 Date: Mon Oct 12 16:58:19 2009 -0600
6730 oops, forgot to specify the repo to push to
6732 commit 68008ac11c2735ca53a1b474324df43f2f1d5cdd
6733 Author: Bdale Garbee <bdale@gag.com>
6734 Date: Mon Oct 12 16:57:33 2009 -0600
6736 update changelogs for Debian build
6738 commit 513328ac5f7c25f9ee144ab6befbea60d69eed1a
6739 Author: Bdale Garbee <bdale@gag.com>
6740 Date: Mon Oct 12 16:56:50 2009 -0600
6742 automate push of updated and tagged master branch during debian/rules prebuild
6744 commit 67bf7d388a6dd2dbf65575bf4f0423ad355b4f2f
6745 Author: Bdale Garbee <bdale@gag.com>
6746 Date: Mon Oct 12 16:54:44 2009 -0600
6748 update changelogs for Debian build
6750 commit 23bc21a93ccb9f35917f283ac5df6ce0870df71a
6751 Author: Bdale Garbee <bdale@gag.com>
6752 Date: Mon Oct 12 16:54:16 2009 -0600
6754 undue damage from partial build
6756 commit 7da56ad8576ef212ffb6cb573bdaf578453e3fe0
6757 Author: Bdale Garbee <bdale@gag.com>
6758 Date: Mon Oct 12 16:52:52 2009 -0600
6760 add support for tagging git repository on each Debian package build
6762 commit 8d4aa4ee54f85f4951cdd7293d58aaa405cfcdc5
6763 Author: Bdale Garbee <bdale@gag.com>
6764 Date: Mon Oct 12 16:49:34 2009 -0600
6766 update changelogs for Debian build
6768 commit 241a860fe856b1dfad6e792736313648300d5c24
6769 Author: Bdale Garbee <bdale@gag.com>
6770 Date: Mon Oct 12 16:48:43 2009 -0600
6772 flush repetitive junk out of debian/changelog, and update the prebuild target
6773 in debian/rules to put git commit details into the Debian changelog
6775 commit 6c4cdc927b43736b39be29d23ac3dc723f69e4d6
6776 Author: Bdale Garbee <bdale@gag.com>
6777 Date: Mon Oct 12 15:57:19 2009 -0600
6779 update changelogs for Debian build
6781 commit c57bd7fd2f80e50b0b4c87fccb024ab07c93773d
6782 Merge: adf8764 2b76572
6783 Author: Bdale Garbee <bdale@gag.com>
6784 Date: Mon Oct 12 15:57:08 2009 -0600
6786 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
6788 commit 69b6f6bb465163cf767bb68e0e4a716d8ad2b39c
6789 Merge: bc77da6 2b76572
6790 Author: Keith Packard <keithp@keithp.com>
6791 Date: Sat Oct 10 17:16:21 2009 -0700
6793 Merge branch 'master' into skytraq
6795 commit 2b765728ce177e26899f6feef00bfdf6aeaf2678
6796 Author: Keith Packard <keithp@keithp.com>
6797 Date: Sat Oct 10 17:15:38 2009 -0700
6799 Add apogee igniter delay.
6801 Provide for a delay after apogee before the drogue charge is
6802 fired. This allows TM to be used as a back-up altimeter.
6804 Signed-off-by: Keith Packard <keithp@keithp.com>
6806 commit bc77da68c9cb7d4cca483eadbbb7e9ccf71c0060
6807 Merge: 46cccf6 8f7ea3d
6808 Author: Keith Packard <keithp@keithp.com>
6809 Date: Sat Oct 10 15:09:48 2009 -0700
6811 Merge branch 'master' into skytraq
6813 commit 8f7ea3de7037f40b0ff462b60d503c19431ae62b
6814 Author: Keith Packard <keithp@keithp.com>
6815 Date: Sat Oct 10 15:08:14 2009 -0700
6817 Report igniter continuity in pad/idle mode via beeper
6819 one short beep = drogue
6820 two short beeps = main
6821 three short beeps = both
6822 one long warble = neither
6824 In idle mode, it does this just once. In pad mode, it keeps testing
6827 Signed-off-by: Keith Packard <keithp@keithp.com>
6829 commit adf8764bc4591795ba4e618ccbd6393fc6ce6450
6830 Author: Bdale Garbee <bdale@gag.com>
6831 Date: Sat Oct 10 15:11:23 2009 -0600
6833 update changelogs for Debian build
6835 commit 541da6f3bbf81be93dfe3c01f7c8cfd757b28a2b
6836 Merge: dfc73cb 5f26ad6
6837 Author: Bdale Garbee <bdale@gag.com>
6838 Date: Sat Oct 10 15:05:50 2009 -0600
6840 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
6842 commit 46cccf62fb40514b5930fcb2ffdaf2735415c764
6843 Merge: fb8f3fe 5f26ad6
6844 Author: Keith Packard <keithp@keithp.com>
6845 Date: Sat Oct 10 14:00:03 2009 -0700
6847 Merge branch 'master' into skytraq
6849 commit 5f26ad663b3f60dddc9d967206e365f45dc4acd1
6850 Author: Keith Packard <keithp@keithp.com>
6851 Date: Sat Oct 10 13:58:16 2009 -0700
6853 ao-dumplog: switch to 'e' command, display progress
6855 Using the 'e' command allows additional checking of the data,
6856 including end-to-end checksums and detection of missing data.
6858 Progress is displayed by showing the recorded flight state along with
6859 a '.' for each eeprom block read.
6861 Signed-off-by: Keith Packard <keithp@keithp.com>
6863 commit fb8f3fee6a1bab1e46d782e84405845cee2dadb4
6864 Merge: 22856cf b8fc397
6865 Author: Keith Packard <keithp@keithp.com>
6866 Date: Sat Oct 10 13:41:00 2009 -0700
6868 Merge branch 'master' into skytraq
6870 commit b8fc3975bd92037a0cf53b0ff2b0e05ce0ba668f
6871 Author: Keith Packard <keithp@keithp.com>
6872 Date: Sat Oct 10 13:39:01 2009 -0700
6874 Send 0-length IN packet to flush USB after full packet
6876 USB bulk transfers are a sequence of maximum-sized packets followed by
6877 a short packet, which signals the end of the transfer. When the last
6878 packet of the transfer would be a full-sized packet, an additional
6879 packet of zero length is sent to signal the transfer end.
6881 Signed-off-by: Keith Packard <keithp@keithp.com>
6883 commit 22856cf8bb0f5e1f37c9b774132d9ef6934526ed
6884 Merge: 2f76034 e29961f
6885 Author: Keith Packard <keithp@keithp.com>
6886 Date: Sat Oct 10 11:44:20 2009 -0700
6888 Merge branch 'master' into skytraq
6890 commit e29961fdb2a48874c895829880eadbf13e094c0c
6891 Author: Keith Packard <keithp@keithp.com>
6892 Date: Sat Oct 10 11:43:31 2009 -0700
6894 Add channel menu to ao-view.
6896 Sets radio channel when TD is connected, saves selected channel in
6899 Signed-off-by: Keith Packard <keithp@keithp.com>
6901 commit 2f7603490a169df8f18b565db4fa967832ffc9bd
6902 Author: Keith Packard <keithp@keithp.com>
6903 Date: Fri Oct 9 22:48:29 2009 -0700
6905 Build two versions of TM, one for SiRF, one for SkyTraq
6907 This creates two separate images, depending on which GPS unit is
6910 Signed-off-by: Keith Packard <keithp@keithp.com>
6912 commit 33b0b6f2f2e07de105619a7b463226d2813152ab
6913 Author: Keith Packard <keithp@keithp.com>
6914 Date: Fri Oct 9 22:02:40 2009 -0700
6916 Add support for the SkyTraq GPS unit
6918 This is a build-time option selected by hacking the Makefile at present.
6920 Signed-off-by: Keith Packard <keithp@keithp.com>
6922 commit a3771bfc5ce740f9d89193e9f8b1d7987aa57264
6923 Author: Keith Packard <keithp@keithp.com>
6924 Date: Tue Oct 6 20:06:00 2009 -0700
6926 ao-view: fix snd_pcm_open return checking
6928 I don't know how this code was supposed to work before...
6930 Signed-off-by: Keith Packard <keithp@keithp.com>
6932 commit ac4b8a73848f434999a532eab4665253c267c597
6933 Author: Keith Packard <keithp@keithp.com>
6934 Date: Tue Oct 6 20:05:36 2009 -0700
6936 ao-postflight: dump out GPS signal data
6938 Signed-off-by: Keith Packard <keithp@keithp.com>
6940 commit dfc73cba1bee8b121e00e8cba45e7dfaaf79e9d8
6941 Author: Bdale Garbee <bdale@gag.com>
6942 Date: Mon Sep 21 22:46:59 2009 -0700
6944 update changelogs for Debian build
6946 commit 459ff3d377297f80ee2fba0df0a29ff6603467a1
6947 Author: Bdale Garbee <bdale@gag.com>
6948 Date: Mon Sep 21 11:00:32 2009 -0700
6950 update changelogs for Debian build
6952 commit 327c64305a59f48ababf19875874a550af6b9cef
6953 Merge: c8a81a4 74f0fb4
6954 Author: Bdale Garbee <bdale@gag.com>
6955 Date: Mon Sep 21 11:00:22 2009 -0700
6957 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
6959 commit 74f0fb4dd189abc1d5027c64fa5a648a6003285a
6960 Author: Keith Packard <keithp@keithp.com>
6961 Date: Sun Sep 20 13:33:59 2009 -0700
6963 make bit-banging reset script actually reset
6965 commit 7ea371a09385e2a93199f78685e8cb86793ed104
6966 Author: Keith Packard <keithp@keithp.com>
6967 Date: Sun Sep 20 13:33:26 2009 -0700
6969 Add --gps option to ao-postflight
6971 commit bc7ccb339e538a0e6120db0e5c0d9130c565e0dd
6972 Author: Keith Packard <keithp@keithp.com>
6973 Date: Sun Sep 20 13:32:59 2009 -0700
6975 ao_rawload: Don't reset after we finish loading
6977 commit c8a81a419f7f2331624f90bd6c107a86f6b04451
6978 Author: Bdale Garbee <bdale@gag.com>
6979 Date: Sun Sep 20 09:21:00 2009 -0600
6981 update changelogs for Debian build
6983 commit df42ccaaf468cdc5d93cbd1c001f58df58419722
6984 Merge: 0b24e40 078e9cd
6985 Author: Bdale Garbee <bdale@gag.com>
6986 Date: Sun Sep 20 09:19:28 2009 -0600
6988 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
6990 commit 078e9cdbdb388b22c6151f76ff0660fc14b8ef55
6991 Author: Keith Packard <keithp@keithp.com>
6992 Date: Thu Sep 10 11:53:06 2009 -0700
6994 Plot raw accel data for the motor accel section.
6996 This shows a short sequence of accelerometer data without any filtering.
6998 Signed-off-by: Keith Packard <keithp@keithp.com>
7000 commit 8b485d937ff148848ebda7f9ca6be29bb1de1f16
7001 Author: Keith Packard <keithp@keithp.com>
7002 Date: Sun Sep 6 21:02:48 2009 -0700
7004 Show acceleration only during boost phase.
7006 We're interested in motor performance; the rest of the flight is
7009 Signed-off-by: Keith Packard <keithp@keithp.com>
7011 commit 9e660315e1bd2bf71ab1c0574e895e1f7608a58f
7012 Author: Keith Packard <keithp@keithp.com>
7013 Date: Sun Sep 6 21:01:44 2009 -0700
7015 Fix cc_period_make to not get stuck on samples with matching time
7017 When two samples have matching times, step to the second one;
7018 otherwise, we'll get stuck forever.
7020 Signed-off-by: Keith Packard <keithp@keithp.com>
7022 commit 932f1539b38567e565fd484171c13539b1467308
7023 Author: Keith Packard <keithp@keithp.com>
7024 Date: Sun Sep 6 20:26:17 2009 -0700
7026 Color plots, integrate only flight portion of data.
7028 Telemetry files have piles of pad data which shouldn't be integrated
7029 into the velocity data as it tends to generate huge values from the
7030 noise of the sensor.
7032 Also make the data lines colored to keep them visually distinct from
7033 the rest of the plot image.
7035 Signed-off-by: Keith Packard <keithp@keithp.com>
7037 commit 9177f5f4e9d832558ddd9ab227c4511f6201e7e5
7038 Author: Keith Packard <keithp@keithp.com>
7039 Date: Sun Sep 6 18:11:24 2009 -0700
7041 Update usage and man page for ao-postflight
7043 commit 0b24e4034f93010372a3d084668d10f0e4a2c2e1
7044 Author: Bdale Garbee <bdale@gag.com>
7045 Date: Sun Sep 6 18:01:20 2009 -0600
7047 update changelogs for Debian build
7049 commit a5e94aa0677070a051714443cf7fd7e2b5e90269
7050 Author: Bdale Garbee <bdale@gag.com>
7051 Date: Sun Sep 6 17:59:47 2009 -0600
7053 need a run-time dependency to pull in the cairo module
7055 commit 97acef95cc9843998963921459fdd71dd7eaa6b4
7056 Author: Bdale Garbee <bdale@gag.com>
7057 Date: Sun Sep 6 17:48:23 2009 -0600
7059 update changelogs for Debian build
7061 commit 3f95a5abbf8ada70328ced45fbb2781ed1cb3d29
7062 Author: Bdale Garbee <bdale@gag.com>
7063 Date: Sun Sep 6 17:48:10 2009 -0600
7065 more build deps for plotting lib
7067 commit 9d7e96e323d652de08b2f2a73e0eb3c321080185
7068 Author: Bdale Garbee <bdale@gag.com>
7069 Date: Sun Sep 6 17:47:56 2009 -0600
7071 update changelogs for Debian build
7073 commit ae4e131b61244e06020b82919e31e05dd7dba88f
7074 Author: Bdale Garbee <bdale@gag.com>
7075 Date: Sun Sep 6 17:46:39 2009 -0600
7077 update changelogs for Debian build
7079 commit 37e6c9a492a1d51373bf9333fb3172e0c377720f
7080 Merge: d256f82 2e6686b
7081 Author: Bdale Garbee <bdale@gag.com>
7082 Date: Sun Sep 6 17:46:10 2009 -0600
7084 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7086 commit 2e6686b1e183c66188ea447b8a54e4c29402443b
7087 Author: Keith Packard <keithp@keithp.com>
7088 Date: Sun Sep 6 16:45:47 2009 -0700
7090 Use plplotd instead of plplotd-gnome2
7092 commit d256f8204e9fce53ae4309562bb4c0cde1fae43e
7093 Merge: 0fc344d 32d3536
7094 Author: Bdale Garbee <bdale@gag.com>
7095 Date: Sun Sep 6 17:34:08 2009 -0600
7097 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7099 commit 32d3536706324808df6cd02248a236302b831571
7100 Author: Keith Packard <keithp@keithp.com>
7101 Date: Sun Sep 6 16:24:35 2009 -0700
7103 Add plots to ao-postflight using the plplot library
7105 It's not perfect, but it generates .svg plot output.
7107 Signed-off-by: Keith Packard <keithp@keithp.com>
7109 commit 0fc344dfc031a8b1eef7cc40efb1d5ba7782269d
7110 Author: Bdale Garbee <bdale@gag.com>
7111 Date: Sun Sep 6 14:15:57 2009 -0600
7113 update changelogs for Debian build
7115 commit 4b0de757874c0ecaf38e3dfd3beefc398150e3d5
7116 Merge: 773c4ff d0eac98
7117 Author: Bdale Garbee <bdale@gag.com>
7118 Date: Sun Sep 6 14:15:53 2009 -0600
7120 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7122 commit d0eac989b1ffc8ae30ba12da403eb4bf1ad42d6b
7123 Author: Keith Packard <keithp@keithp.com>
7124 Date: Sun Sep 6 13:15:10 2009 -0700
7126 Don't look at NULL strings (summary_name)
7128 Signed-off-by: Keith Packard <keithp@keithp.com>
7130 commit 73f4a57239f770aff603b961169c0e2cfe2c276b
7131 Author: Keith Packard <keithp@keithp.com>
7132 Date: Sun Sep 6 13:08:54 2009 -0700
7134 Use pressure speed for drogue and beyond states. Fix differentiation time.
7136 Drogue state should always use pressure speeds.
7138 Differentiation code was using centi-seconds instead of seconds.
7140 Signed-off-by: Keith Packard <keithp@keithp.com>
7142 commit 773c4ffbc1d2e02eb02cfa543a077a408986da30
7143 Author: Bdale Garbee <bdale@gag.com>
7144 Date: Sun Sep 6 14:05:55 2009 -0600
7146 update changelogs for Debian build
7148 commit 45ede4a4b203ef9da5bf05c49cb9c5a2e6382ec5
7149 Merge: 45e2938 e35e485
7150 Author: Bdale Garbee <bdale@gag.com>
7151 Date: Sun Sep 6 14:05:51 2009 -0600
7153 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7155 commit e35e485ffe6b26034788ab295121bc2693b7eec1
7156 Author: Keith Packard <keithp@keithp.com>
7157 Date: Sun Sep 6 13:04:31 2009 -0700
7159 Initialize summary_name and detail_name so stuff appears on stdout.
7161 Uninitialized variables lead to mysterious results.
7163 Signed-off-by: Keith Packard <keithp@keithp.com>
7165 commit 45e2938121411d1fc9b3aec3fdeaaeb3c90db5ed
7166 Author: Bdale Garbee <bdale@gag.com>
7167 Date: Sun Sep 6 14:02:14 2009 -0600
7169 update changelogs for Debian build
7171 commit d42ebf0661ecf15455e5051de1e16ae66f8dd857
7172 Merge: 384dbe9 7a19aac
7173 Author: Bdale Garbee <bdale@gag.com>
7174 Date: Sun Sep 6 14:02:09 2009 -0600
7176 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7178 commit 7a19aac5e881e635962a64fff73027ca2143b96f
7179 Author: Keith Packard <keithp@keithp.com>
7180 Date: Sun Sep 6 12:51:48 2009 -0700
7182 Add DSP code to filter data, allowing for integration/differentiation
7184 This adds the computation of speed from both accelerometer and
7185 barometer measurements and then presents a periodic flight profile
7186 using filtered data as a detailed flight record.
7188 Signed-off-by: Keith Packard <keithp@keithp.com>
7190 commit 384dbe9fc7fa8e4e5dceec5e150f0f1d3383bbdc
7191 Author: Bdale Garbee <bdale@gag.com>
7192 Date: Sun Sep 6 10:40:06 2009 -0600
7194 update changelogs for Debian build
7196 commit 35c54b3a278fa9bc2bc7f4b5ee04866697c93ba0
7197 Merge: 4f8eff7 6d018ab
7198 Author: Bdale Garbee <bdale@gag.com>
7199 Date: Sun Sep 6 10:39:23 2009 -0600
7201 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7203 commit 6d018ab933832e2d80bb1564c339d9fb18b57be2
7204 Author: Keith Packard <keithp@keithp.com>
7205 Date: Sat Sep 5 22:45:49 2009 -0700
7207 Handle vageries of .telem files in ao-postflight
7209 Telem files have multiple entries of the same state, and sometimes
7210 long gaps between recordings. Deal with this as best as possible.
7212 Signed-off-by: Keith Packard <keithp@keithp.com>
7214 commit c46e832b28820d7c5be4efaacbbd7c0607927fe5
7215 Author: Keith Packard <keithp@keithp.com>
7216 Date: Sat Sep 5 22:03:31 2009 -0700
7218 Add simple post-flight analysis tool (ao-postflight)
7220 This tool reads either an eeprom or telem log file and displays some
7221 rudimentary data (max accel/alt for each flight stage).
7223 Signed-off-by: Keith Packard <keithp@keithp.com>
7225 commit 26f56b51bd11aa91f1d77b81827b49c28cb6ec5f
7226 Author: Keith Packard <keithp@keithp.com>
7227 Date: Sat Sep 5 00:29:26 2009 -0700
7229 Add ao-dumplog to capture flight log from command line
7231 This duplicates the functionality of the flight log stuf in ao-view,
7232 except from the command line where it belongs.
7234 Signed-off-by: Keith Packard <keithp@keithp.com>
7236 commit 73adae3661160d410dcc802873b530d255c210e5
7237 Author: Keith Packard <keithp@keithp.com>
7238 Date: Fri Sep 4 15:30:22 2009 -0700
7240 Add --device/-D support to the command line tools and manuals
7242 Use the new cc_usbdevs_find_by_arg function to locate suitable target
7243 devices connected via USB.
7245 Signed-off-by: Keith Packard <keithp@keithp.com>
7247 commit 4f8eff7401ee2d8092ab36fa33411f9b23dda880
7248 Author: Bdale Garbee <bdale@gag.com>
7249 Date: Fri Sep 4 16:03:55 2009 -0600
7251 update changelogs for Debian build
7253 commit 332b056459b1352e233a8bf5f08498df12d32160
7254 Author: Keith Packard <keithp@keithp.com>
7255 Date: Fri Sep 4 15:01:32 2009 -0700
7257 'fix' ao-eeprom to read two blocks at once. Work around kernel bugs.
7259 The kernel appears to leave serial data undelivered at times. Reading
7260 two blocks at once appears to make it relinquish the queued data.
7262 Signed-off-by: Keith Packard <keithp@keithp.com>
7264 commit df88ae4c5f229efcc0ea5cb0a81fc2bb8f96fea2
7265 Author: Keith Packard <keithp@keithp.com>
7266 Date: Fri Sep 4 14:23:02 2009 -0700
7268 Add 'ao-list' utility to show attached AltOS devices
7270 Signed-off-by: Keith Packard <keithp@keithp.com>
7272 commit 0935d6a7e907e20381a42882ae728051f9bece02
7273 Author: Keith Packard <keithp@keithp.com>
7274 Date: Fri Sep 4 14:21:19 2009 -0700
7276 Parse the USB serial number as an integer.
7278 AltOS devices use simple integer serial numbers, so parse the USB
7279 value as such to make matching values more forgiving.
7281 Signed-off-by: Keith Packard <keithp@keithp.com>
7283 commit 0c771d999914f9d17c723900f2987acc45fd0fbb
7284 Author: Keith Packard <keithp@keithp.com>
7285 Date: Fri Sep 4 13:00:02 2009 -0700
7287 Move usb scanning code to ao-tools library
7289 This will allow the scanning code to be used by the command line tools
7290 as well as the ao-view GUI.
7292 Now that ao-view depends on the ao-tools library, it has been moved to
7293 the ao-tools directory as well.
7295 Signed-off-by: Keith Packard <keithp@keithp.com>
7297 commit 15341b6e6dcf52df083d6aa37ef881ea6ad48ee5
7298 Author: Keith Packard <keithp@keithp.com>
7299 Date: Fri Sep 4 12:25:37 2009 -0700
7301 Set all of the values to reset the radio for telemetry
7303 Was sizeof(rdf_setup) instead of sizeof(telemetry_setup) when
7304 resetting the radio back to telemetry data mode from rdf mode. With
7305 the length value removed from the rdf config, these two arrays are no
7306 longer the same length, and so the last config value was not set
7307 leaving the radio sending garbage.
7309 Signed-off-by: Keith Packard <keithp@keithp.com>
7311 commit fee46389b70a624ab5b1128a8b4c3083c7747bcb
7312 Author: Keith Packard <keithp@keithp.com>
7313 Date: Fri Sep 4 11:46:55 2009 -0700
7315 Make RDF beacon only run on pad and after landing.
7317 It's pretty much impossible to RDF the rocket during flight, and it
7318 interferes with the telemetry data stream. Leave it enabled on the pad
7319 so that radios can be tested, and then re-enable it once the rocket
7322 This patch also turns the rdf 'on' time into a parameter so it can be
7323 changed, and then sets that parameter to 500ms, once every 5 seconds.
7325 Signed-off-by: Keith Packard <keithp@keithp.com>
7327 commit 54545640b0db7747137655f84bc67fd290ecb904
7328 Author: Keith Packard <keithp@keithp.com>
7329 Date: Fri Sep 4 11:45:52 2009 -0700
7331 Add back the RDF tone generator
7333 Tracking the rocket on the ground may be easier using tones than using
7334 the digital data stream, so we'll try that and see what we think.
7336 This reverts commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9.
7338 Signed-off-by: Keith Packard <keithp@keithp.com>
7340 commit 9fafee109e96435c96639b21211cac0500673a63
7341 Author: Bdale Garbee <bdale@gag.com>
7342 Date: Wed Sep 2 23:18:15 2009 -0600
7344 update changelogs for Debian build
7346 commit cb4a73f3b65ba72f645fd37ab8712829c9537bf8
7347 Merge: 9ddd869 e2e449d
7348 Author: Bdale Garbee <bdale@gag.com>
7349 Date: Wed Sep 2 23:17:37 2009 -0600
7351 Merge commit 'origin/master'
7353 commit e2e449d5c23356e913f312de1fb2611a9dd5a352
7354 Author: Keith Packard <keithp@keithp.com>
7355 Date: Wed Sep 2 22:01:52 2009 -0700
7357 Remove bit-banging debug support from TM board builds
7359 Our current TM boards don't have the wires to do bit-banging to
7360 another cc1111 board, so it doesn't make sense to fill up their flash
7361 with useless code (and the 'help' text with useless commands). Leave
7362 this to the TI board until we have boards that can serve as debug dongles.
7364 Signed-off-by: Keith Packard <keithp@keithp.com>
7366 commit acea083d80e1ecc4287083519ea666964016b257
7367 Author: Keith Packard <keithp@keithp.com>
7368 Date: Wed Sep 2 22:00:37 2009 -0700
7370 Make the ao_log_record structures 8 bytes again.
7372 When the GPS signal strength data was added, the structure was
7373 accidentally extended to 9 bytes, making all log records 9 bytes
7374 long. While not a serious problem, this left log records spanning
7375 across eeprom block boundaries, which seems like a bad plan.
7377 Signed-off-by: Keith Packard <keithp@keithp.com>
7379 commit 7d39f17684feb49ac8a0017902158f298696e37c
7380 Author: Keith Packard <keithp@keithp.com>
7381 Date: Wed Sep 2 21:57:54 2009 -0700
7383 Make eeprom reads and writes across block boundary work
7385 Reading and writing across the block boundary was not stepping the
7386 eeprom position after the partial i/o operation at the end of the
7387 first block. This meant that the operation would re-use the end of the
7388 previous block, either re-reading or re-writing it.
7390 Signed-off-by: Keith Packard <keithp@keithp.com>
7392 commit 9ddd8696b4004ccc03238d95a8c2a1d07075e0fb
7393 Author: Bdale Garbee <bdale@gag.com>
7394 Date: Mon Aug 31 16:48:03 2009 -0600
7396 update changelogs for Debian build
7398 commit 6926c4ab5d87a8f2eb4fcde2c673fb3a4639e115
7399 Author: Bdale Garbee <bdale@gag.com>
7400 Date: Mon Aug 31 16:47:44 2009 -0600
7402 pixmap file should not be executable
7404 commit 1495e2f27acde3743c3764a0c31ee082224d6c64
7405 Author: Bdale Garbee <bdale@gag.com>
7406 Date: Mon Aug 31 16:42:55 2009 -0600
7408 update changelogs for Debian build
7410 commit c8c5b7963babe8eb16e2651fba9cd2c8d1cba74e
7411 Author: Bdale Garbee <bdale@gag.com>
7412 Date: Mon Aug 31 16:42:37 2009 -0600
7414 deliver an icon for the Debian menu system
7416 commit 591b99c232e780246fc07841c09c8c4e7835facb
7417 Author: Bdale Garbee <bdale@gag.com>
7418 Date: Mon Aug 31 16:26:00 2009 -0600
7420 update changelogs for Debian build
7422 commit b34474c1f3083e73b7184d519f54d4c8031836fd
7423 Merge: 8df1697 0d65bff
7424 Author: Bdale Garbee <bdale@gag.com>
7425 Date: Mon Aug 31 16:25:32 2009 -0600
7427 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7429 commit 6358041f846ba9a20fa650c367d907dc4336e54c
7430 Author: Keith Packard <keithp@keithp.com>
7431 Date: Sat Aug 22 13:38:56 2009 -0700
7433 Enable GPS degraded mode, set 10 sec degraded timeout.
7435 No reason not to let the GPS report solutions whenever it likes, let's
7438 Signed-off-by: Keith Packard <keithp@keithp.com>
7440 commit 0d65bff443c17d4d98c18b620ec075ab66b30efd
7441 Author: Keith Packard <keithp@keithp.com>
7442 Date: Fri Aug 21 10:47:46 2009 -0700
7444 Turn off GPS tracking data when not present in data stream
7446 Signed-off-by: Keith Packard <keithp@keithp.com>
7448 commit 8df169791835510d96c11a3b0aa3cc5b79fa7fde
7449 Author: Bdale Garbee <bdale@gag.com>
7450 Date: Wed Aug 19 02:21:23 2009 -0600
7452 update changelogs for Debian build
7454 commit 42ab6d52540d0326ef89e9d57954b08248558468
7455 Author: Bdale Garbee <bdale@gag.com>
7456 Date: Wed Aug 19 02:21:06 2009 -0600
7458 fix location for delivery of sources.list fragment
7460 commit 977f5dc0bc7c666dcc1f21db77416efca0d696aa
7461 Author: Bdale Garbee <bdale@gag.com>
7462 Date: Wed Aug 19 02:11:11 2009 -0600
7464 update changelogs for Debian build
7466 commit 8d4d6655f1b4c2fbc522fd255bfb75406e5ddaef
7467 Author: Bdale Garbee <bdale@gag.com>
7468 Date: Wed Aug 19 02:11:00 2009 -0600
7470 oops, aoview is now ao-view!
7472 commit b9a97aea65f871fd287bc0bb566d8664766f4afd
7473 Author: Bdale Garbee <bdale@gag.com>
7474 Date: Wed Aug 19 02:07:16 2009 -0600
7476 update changelogs for Debian build
7478 commit 21e3dd0affac89919e5d0e29c6e9eb1eacb51801
7479 Author: Bdale Garbee <bdale@gag.com>
7480 Date: Wed Aug 19 02:06:49 2009 -0600
7482 enable support for Debian menus
7484 commit 0087c1776e0253fc2bd3b86f15bf9d1b32bdc45a
7485 Author: Bdale Garbee <bdale@gag.com>
7486 Date: Wed Aug 19 00:52:57 2009 -0600
7488 update changelogs for Debian build
7490 commit 4486d9156e19e4280b42bcd422d81d04f2d04a92
7491 Merge: dd09f0b 33edd62
7492 Author: Bdale Garbee <bdale@gag.com>
7493 Date: Wed Aug 19 00:49:24 2009 -0600
7495 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7497 commit 33edd62992a32b0ec8ca66d879fa300871db5937
7498 Author: Keith Packard <keithp@keithp.com>
7499 Date: Tue Aug 18 23:38:16 2009 -0700
7501 Update ao-view to add GPS satellite tracking data
7503 This adds another column to the display to hold per-satellite GPS
7504 tracking data and a count of the visible and locked sats.
7506 Signed-off-by: Keith Packard <keithp@keithp.com>
7508 commit 29687cbd462a332d9a36ed87500c5b737dcae3f4
7509 Author: Keith Packard <keithp@keithp.com>
7510 Date: Tue Aug 18 22:35:15 2009 -0700
7512 Handle GPS satellite tracking data
7514 SiRF message #4 includes signal strength and GPS engine state for each
7515 of the satellites being tracked. This data is now parsed and sent to
7516 eeprom and the radio.
7518 Signed-off-by: Keith Packard <keithp@keithp.com>
7520 commit dd09f0bc2b950c00f3b489878cd69ad8a003f46c
7521 Author: Bdale Garbee <bdale@gag.com>
7522 Date: Tue Aug 18 21:57:01 2009 -0600
7524 update changelogs for Debian build
7526 commit cd5ce661e2a8f9694933358ccb5b916fbed089c2
7527 Author: Bdale Garbee <bdale@gag.com>
7528 Date: Tue Aug 18 21:49:39 2009 -0600
7530 add support for building Debian package
7532 commit d996aa9b32fb0eb385bd3d158256c29788a42fe3
7533 Merge: b3b2d3c 7d4ceb7
7534 Author: Bdale Garbee <bdale@gag.com>
7535 Date: Tue Aug 18 18:56:09 2009 -0600
7537 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7539 commit 7d4ceb75a454e6c9b3fe0bd934fadcb5104dea36
7540 Author: Keith Packard <keithp@keithp.com>
7541 Date: Tue Aug 18 17:55:22 2009 -0700
7543 Add ao-ejection.1 man page
7545 Document the input requirements and output format
7547 Signed-off-by: Keith Packard <keithp@keithp.com>
7549 commit b3b2d3c475a135084b5628c730fc6fca1ba0817b
7550 Merge: 4685fc5 da12b89
7551 Author: Bdale Garbee <bdale@gag.com>
7552 Date: Tue Aug 18 18:36:03 2009 -0600
7554 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7556 commit da12b89fb056a68e65ba363fef91d266727cb685
7557 Author: Keith Packard <keithp@keithp.com>
7558 Date: Tue Aug 18 17:30:43 2009 -0700
7560 Create ChangeLog from git log
7562 commit 7d69e2b3715faed10ce21ad562fc4d25dfc5f9c1
7563 Author: Keith Packard <keithp@keithp.com>
7564 Date: Tue Aug 18 17:29:29 2009 -0700
7566 Fix ao-bitbang examples to not have . in the first column
7568 commit 4685fc541466afbeefc151bcb64cd054739c048b
7569 Merge: 1c2a0b6 c29275b
7570 Author: Bdale Garbee <bdale@gag.com>
7571 Date: Tue Aug 18 18:09:38 2009 -0600
7573 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7576 ao-tools/ao-bitbang/Makefile.am
7577 ao-tools/ao-eeprom/Makefile.am
7578 ao-tools/ao-load/Makefile.am
7579 ao-tools/ao-load/ao-load.c
7580 ao-tools/ao-rawload/Makefile.am
7582 commit c29275b72438637d46d7a50742882d2736eb176a
7583 Author: Keith Packard <keithp@keithp.com>
7584 Date: Tue Aug 18 15:21:57 2009 -0700
7586 Add manual pages for remaining commands.
7588 Manuals written for ao-bitbang, ao-eeprom, ao-load, ao-rawload and
7591 Manual for ao-dbg updated to reflect program name change.
7593 Signed-off-by: Keith Packard <keithp@keithp.com>
7595 commit 9b03d620722dc54630539afba40720c30de69b2d
7596 Author: Keith Packard <keithp@keithp.com>
7597 Date: Tue Aug 18 12:19:31 2009 -0700
7599 Use --tty/-T on command line to specify target device
7601 Also, use the ALTOS_TTY environment variable in all tools. Note that
7602 the magic value of "BITBANG" switches the library to connecting
7603 through a CP2103 instead.
7605 Signed-off-by: Keith Packard <keithp@keithp.com>
7607 commit 7c790fe859dff062692964338091ffbbcdf63257
7608 Author: Keith Packard <keithp@keithp.com>
7609 Date: Tue Aug 18 12:40:24 2009 -0700
7611 Rename tools to ao-<foo>
7613 Use a consistent prefix to make it easier to remember which programs
7614 belong to this package
7616 Signed-off-by: Keith Packard <keithp@keithp.com>
7618 commit 1c2a0b6653623b689d68d7349a6b2dce3e20a4a6
7619 Author: Keith Packard <keithp@keithp.com>
7620 Date: Tue Aug 18 13:36:54 2009 -0700
7622 re-add debugger sources
7624 commit 9a9cce5510b87252f863239ac807b9fb4395b288
7625 Author: Keith Packard <keithp@keithp.com>
7626 Date: Tue Aug 18 12:19:31 2009 -0700
7628 Start working on using getopt for the tty name
7630 commit 9789ca5e8caa9a013e804f307b9da380e147bd75
7631 Author: Keith Packard <keithp@keithp.com>
7632 Date: Tue Aug 18 12:40:24 2009 -0700
7634 Rename tools to ao-<foo>
7636 Use a consistent prefix to make it easier to remember which programs
7637 belong to this package
7639 Signed-off-by: Keith Packard <keithp@keithp.com>
7641 commit a5782398d968e7cb11f7203afada7c216f233b3b
7642 Author: Keith Packard <keithp@keithp.com>
7643 Date: Tue Aug 18 11:34:28 2009 -0700
7645 Remove unused cctools code paths for old libusb and cp2103 ioctls.
7647 Communication with the CP2103 board has gone through three revisions,
7648 first using ioctls supported by the CP2103 kernel driver, then using
7649 the old synchronous usb library and now using the newer libusb
7650 asynchronous interface. There's no reason to keep shipping the old
7651 stale code now that the new stuff works reliably.
7653 Signed-off-by: Keith Packard <keithp@keithp.com>
7655 commit 7cba411de0780c65e3490ab67186a514f0ea42ec
7656 Author: Keith Packard <keithp@keithp.com>
7657 Date: Mon Aug 17 20:47:31 2009 -0700
7659 test for sdcc, nickle and readline
7661 Signed-off-by: Keith Packard <keithp@keithp.com>
7663 commit f48dcffae761700355a17b59345d55a60703f0c4
7664 Author: Keith Packard <keithp@keithp.com>
7665 Date: Sun Aug 9 20:43:10 2009 -0700
7667 Sync USB data after each memory write command
7669 This makes sure we flush the USB link often enough for the other end to keep
7672 Signed-off-by: Keith Packard <keithp@keithp.com>
7674 commit cd5456f18e4b39ad76d5549df91a0e0cfb18a2e9
7675 Author: Keith Packard <keithp@keithp.com>
7676 Date: Sun Aug 9 16:08:07 2009 -0700
7678 Handle partial ALSA PCM writes
7680 The ALSA spec says that snd_pcm_writei will not return a partial write, but
7681 at least on the OLPC, that's not true. Deal with this.
7683 Signed-off-by: Keith Packard <keithp@keithp.com>
7685 commit 3056cb8eef5aee0dcd342488386355d8b8f574c8
7686 Author: Keith Packard <keithp@keithp.com>
7687 Date: Sun Aug 9 15:55:19 2009 -0700
7689 Check more alsa return statuses
7691 commit 8ddf3345afd8cbf638e81993633f7861d8dbca63
7692 Author: Keith Packard <keithp@keithp.com>
7693 Date: Sat Jul 18 01:47:34 2009 -0700
7695 Don't report distance to rocket without valid GPS
7697 When there's no valid GPS data, don't try to report the distance and bearing
7698 to the rocket after landing.
7700 Signed-off-by: Keith Packard <keithp@keithp.com>
7702 commit fbcb7b20fa701a6e534d38e307839466545668e3
7703 Author: Keith Packard <keithp@keithp.com>
7704 Date: Sat Jul 18 01:05:33 2009 -0700
7706 Add B command to set serial baud rate
7708 Signed-off-by: Keith Packard <keithp@keithp.com>
7710 commit 91b023e7e4eeed838e0320d2ddac0f6aac39e565
7711 Author: Keith Packard <keithp@keithp.com>
7712 Date: Sat Jul 18 01:05:13 2009 -0700
7714 Get rid of spaces after minus sign in climb value
7716 commit 28be20cf914fb34dc3c776519708d0f02091764e
7717 Author: Keith Packard <keithp@keithp.com>
7718 Date: Sat Jul 18 01:04:39 2009 -0700
7720 Switch to 57600 baud for GPS data
7722 commit d3f76ce58b9c0ed2e5a9fe3bbc7fb9cb38247714
7723 Author: Keith Packard <keithp@keithp.com>
7724 Date: Sat Jul 18 01:04:17 2009 -0700
7726 Drain serial port before changing speed
7728 Signed-off-by: Keith Packard <keithp@keithp.com>
7730 commit d7c2d358ed8a1afc9f0ba2bd830b10f6b56dc7b1
7731 Author: Keith Packard <keithp@keithp.com>
7732 Date: Sat Jul 18 00:44:42 2009 -0700
7734 Display last known GPS coord while unlocked
7736 Signed-off-by: Keith Packard <keithp@keithp.com>
7738 commit 5195fcfe239e430e1f9f11774c9a245c7b29dae9
7739 Author: Keith Packard <keithp@keithp.com>
7740 Date: Sat Jul 18 00:44:01 2009 -0700
7742 use g_source_destroy instead of free on serial object
7744 commit 1e5e98bd8f5ea0bc15592de454e3629383462371
7745 Author: Keith Packard <keithp@keithp.com>
7746 Date: Sat Jul 18 00:43:22 2009 -0700
7748 Trim aoview_serial_set_callback args down to just port and callback
7750 commit 08f37056deec25d77062bc411a04033401b033a5
7751 Author: Keith Packard <keithp@keithp.com>
7752 Date: Fri Jul 17 22:11:03 2009 -0700
7754 Reset GPS at boot time
7756 commit 1150aa850f5a025b849556e32c4dddb27937d9af
7757 Author: Keith Packard <keithp@keithp.com>
7758 Date: Fri Jul 17 22:10:43 2009 -0700
7760 Fix up serial debug output
7762 commit 2a7956a64935246475f92d44c08369e0230b676a
7763 Author: Keith Packard <keithp@keithp.com>
7764 Date: Fri Jul 17 21:34:13 2009 -0700
7766 Allow the GPS port to run at 4800 baud if desired
7768 commit 8d650769c319261c97f5e68eff9138207b95c0f8
7769 Author: Keith Packard <keithp@keithp.com>
7770 Date: Fri Jul 17 21:33:53 2009 -0700
7772 Initialize the GPS serial protocol state
7774 Signed-off-by: Keith Packard <keithp@keithp.com>
7776 commit ab40d224b39ba6d29c4056e2d2c365e1eb3d3793
7777 Author: Keith Packard <keithp@keithp.com>
7778 Date: Fri Jul 17 21:33:18 2009 -0700
7780 Use uint8_t for comparisons to avoid int conversions
7782 Signed-off-by: Keith Packard <keithp@keithp.com>
7784 commit d6749bf24792bb41ca700cf4b8e5e1ac1a63cbf0
7785 Author: Keith Packard <keithp@keithp.com>
7786 Date: Fri Jul 17 21:30:53 2009 -0700
7788 Add AO_GPS_RUNNING state.
7790 This tracks whether the GPS receiver has ever sent a valid report to the
7791 flight computer, allowing the user to tell whether the GPS receiver is
7794 Signed-off-by: Keith Packard <keithp@keithp.com>
7796 commit a1da7e871aee75308bc05ce1b7a0dc402e4c9509
7797 Author: Keith Packard <keithp@keithp.com>
7798 Date: Fri Jul 17 21:25:35 2009 -0700
7800 Add M command to monitor serial bytes
7802 commit ddfa2308c0be4c002f982ae9da6032ee7854117d
7803 Author: Keith Packard <keithp@keithp.com>
7804 Date: Fri Jul 17 21:24:45 2009 -0700
7806 Support the not-connected GPS state
7808 commit 34f148500df427c148188c0ada20bf914a7c74ba
7809 Author: Keith Packard <keithp@keithp.com>
7810 Date: Fri Jul 17 19:23:10 2009 -0700
7812 Use 57600 baud for GPS. Clean up gps init.
7814 Assume GPS is either in 4800 NMEA or 57600 SiRF mode, send just the sequence
7815 to get from 4800 NMEA to 5760 SiRF.
7817 Also, eliminate threads from the gps test program.
7819 Signed-off-by: Keith Packard <keithp@keithp.com>
7821 commit 2deca0c52cd6cfb4baceb59c8a5458344bada338
7822 Author: Keith Packard <keithp@keithp.com>
7823 Date: Fri Jul 17 17:09:20 2009 -0700
7825 Try harder to get the GPS receiver serial link sync'd up.
7827 We cannot assume that the GPS receiver is in any particular state when it
7828 boots, so we try to send the serial configuration at several rates and hope
7829 that it eventually sees something that it likes.
7831 Signed-off-by: Keith Packard <keithp@keithp.com>
7833 commit 31d5670a9144b943ce9c8cb00deb5fb659af0b1c
7834 Author: Keith Packard <keithp@keithp.com>
7835 Date: Fri Jul 17 17:06:18 2009 -0700
7837 Rolling average for pad location. Say 'GPS ready'.
7839 Use a rolling average for the pad location, instead of just averaging all
7840 positions. This filters out old (presumably less accurate) values eventually.
7842 When enough GPS samples have been acquired, say 'GPS ready'.
7844 Signed-off-by: Keith Packard <keithp@keithp.com>
7846 commit bfe1e76c82738baaf65abbc58c3244a07ea8fefe
7847 Author: Keith Packard <keithp@keithp.com>
7848 Date: Fri Jul 17 16:22:51 2009 -0700
7850 Split GPS data into a separate column
7852 Signed-off-by: Keith Packard <keithp@keithp.com>
7854 commit 5f0179652e8bb85add9067e5253e981c60f2c51e
7855 Author: Keith Packard <keithp@keithp.com>
7856 Date: Fri Jul 17 16:03:35 2009 -0700
7858 Fix up SiRF parsing and test code so that it actually works
7860 Signed-off-by: Keith Packard <keithp@keithp.com>
7862 commit 0b35447d05a0c7eaf4fefcbcf0065fe3320bba82
7863 Author: Keith Packard <keithp@keithp.com>
7864 Date: Fri Jul 17 13:58:14 2009 -0700
7866 Add host-side gps protocol testing program
7868 commit fef7334bddb9fccfbd6deab7d5d466ab3e76323a
7869 Author: Keith Packard <keithp@keithp.com>
7870 Date: Sat Jul 11 00:56:13 2009 -0700
7872 Hook aoview directly to alsa
7874 This skips the flite internal audio stuff which opened and closed the audio
7875 device for each phrase. This caused the first part of some phrases to be
7876 missed when using an external audio device.
7878 Signed-off-by: Keith Packard <keithp@keithp.com>
7880 commit 80cadf44f5f1accd6ddfca25c2af8d4d424f26d9
7881 Author: Keith Packard <keithp@keithp.com>
7882 Date: Thu Jul 9 20:55:10 2009 -0700
7884 Show speed. Format numbers. Timeout and report final status.
7886 The speed value is now shown in the top label bar. Ascent shows
7887 accelerometer-derived data, otherwise it's baro derived.
7889 All of the numbers displayed are now given sensible printf formats so they
7890 don't contain way too many digits.
7892 Instead of doing periodic reporting based on flight tick count, data is
7893 reported every 10 seconds based on wall time. After landing, or when no data
7894 have been received for a while, final flight information is spoken.
7896 Signed-off-by: Keith Packard <keithp@keithp.com>
7898 commit 19630ef084866f4230e68ccf11284b30c68128b1
7899 Author: Keith Packard <keithp@keithp.com>
7900 Date: Sun Jul 5 08:35:28 2009 -0700
7902 Dont smash aoview_monitor_parse input buffer
7904 commit e506ed4b6efb86eab50204658fcd433b987e3831
7905 Author: Keith Packard <keithp@keithp.com>
7906 Date: Tue Jun 30 15:25:52 2009 -0700
7908 Integrate flite into aoview directly. Fix great circle computation.
7910 Use a separate thread for flite rather than a separate program.
7911 Save voice state to gconf.
7912 Add filters for replay file selection
7914 Signed-off-by: Keith Packard <keithp@keithp.com>
7916 commit 5b988e0146075d57434f8484e1ec9fcf3e183df2
7917 Author: Keith Packard <keithp@keithp.com>
7918 Date: Tue Jun 30 15:24:53 2009 -0700
7922 commit 696233b088645bba1aaa6aa6c5358c3ecfa5cd3f
7923 Author: Keith Packard <keithp@keithp.com>
7924 Date: Tue Jun 30 15:24:31 2009 -0700
7928 commit 2e06772c8b6fd74f86e640ed97f0d5bc8c095c2f
7929 Author: Keith Packard <keithp@keithp.com>
7930 Date: Tue Jun 30 11:58:30 2009 -0700
7932 Add telem replay and larger labels
7934 Replays telemetry files in real time
7935 Shows height/state/rssi in big values at the top.
7937 Signed-off-by: Keith Packard <keithp@keithp.com>
7939 commit 566dde161385263700eaae51095eecfa9b5972ee
7940 Author: Keith Packard <keithp@keithp.com>
7941 Date: Mon Jun 29 23:06:47 2009 -0700
7943 Update aoview/.gitignore
7945 Signed-off-by: Keith Packard <keithp@keithp.com>
7947 commit 4ca2d910f3be689fd3c78a4f1be0555d6b1a30c1
7948 Author: Keith Packard <keithp@keithp.com>
7949 Date: Mon Jun 29 23:05:27 2009 -0700
7951 Use flite to announce flight state
7953 This uses the flite voice synthesis library from festival to announce
7954 altitude and speed information during the rocket flight.
7956 Signed-off-by: Keith Packard <keithp@keithp.com>
7958 commit 527d7c803ed9597b210634018cb2eb9d048d9846
7959 Author: Keith Packard <keithp@keithp.com>
7960 Date: Mon Jun 29 23:03:58 2009 -0700
7962 Add GPS speed and error data to telemetry and aoview
7964 Having switched to the SiRF binary GPS format, the velocity and error data
7965 can now be displayed.
7967 Signed-off-by: Keith Packard <keithp@keithp.com>
7969 commit ee4919dd771b00e2a2dd1083c9528efa7baab50f
7970 Author: Keith Packard <keithp@keithp.com>
7971 Date: Mon Jun 29 13:54:00 2009 -0700
7973 Convert GPS to SiRF binary protocol.
7975 This switches the GPS unit from NMEA to SiRF protocol at startup and then
7976 parses the binary data. The binary data uses a different encoding of lat/lon
7977 than the NMEA strings, and so the telemetry and eeprom data formats change
7980 Signed-off-by: Keith Packard <keithp@keithp.com>
7982 commit 49bf37767d2453869f2ca2c0832d1124322c66e0
7983 Author: Keith Packard <keithp@keithp.com>
7984 Date: Wed Jun 17 23:22:25 2009 -0700
7986 Add ejection computation utility
7988 Signed-off-by: Keith Packard <keithp@keithp.com>
7990 commit e59520e343c2573b1b92c0b3c4aaa93e51bc55d3
7991 Author: Keith Packard <keithp@keithp.com>
7992 Date: Wed Jun 17 13:55:23 2009 -0700
7994 Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4
7996 None of our boards have a 32kHz xtal oscillator, instead we use those pins
7997 (on Telemetrum) for the deployment firing circuits. The old clock
7998 initialization code was switching from the 32kHz RC oscillator to the 32kHz
7999 crystal and overriding our use of those pins.
8001 Signed-off-by: Keith Packard <keithp@keithp.com>
8003 commit 1c3cc12c08ddefbd6456a55c54ef87dd94d4ae9a
8004 Author: Keith Packard <keithp@keithp.com>
8005 Date: Sun Jun 14 17:25:34 2009 -0700
8007 Some kernels reference USB ttys as tty/tty* instead of tty:tty*
8009 Signed-off-by: Keith Packard <keithp@keithp.com>
8011 commit 0f2cbd41332b1b63865c5f1a4e749419b469853a
8012 Author: Keith Packard <keithp@keithp.com>
8013 Date: Sun Jun 14 16:45:19 2009 -0700
8015 Rename state apogee -> coast
8017 commit 5834a12c1d3d71105c9e3d1ceaf9f3ffac9ff1eb
8018 Author: Keith Packard <keithp@keithp.com>
8019 Date: Sun Jun 14 16:39:28 2009 -0700
8021 rename states. launchpad -> pad, coast -> fast
8023 commit 8c40f19acd09fe93d492c9355da8a1198c34b1c3
8024 Author: Keith Packard <keithp@keithp.com>
8025 Date: Sun Jun 14 16:36:29 2009 -0700
8027 Disable monitor mode when communicating via usb
8029 commit 7adea9c59c73acd52743446c74fb675e0a1d6d05
8030 Author: Keith Packard <keithp@keithp.com>
8031 Date: Thu Jun 4 14:38:45 2009 -0700
8033 Format GPS seconds as %02d.%04d to avoid spaces in the value
8035 The aoview GPS parsing code doesn't deal well with spaces in the middle of
8036 the value, so pad the seconds field with a zero as needed.
8038 Signed-off-by: Keith Packard <keithp@keithp.com>
8040 commit a0e6bfee635b64092262936c858542318f6fc6dc
8041 Author: Bdale Garbee <bdale@gag.com>
8042 Date: Thu Jun 4 13:11:48 2009 -0600
8044 newer INSTALL file pulled in by autogen.sh
8046 commit cf1e258d52b878df10b51a047709b10ecd51a68e
8047 Author: Bdale Garbee <bdale@gag.com>
8048 Date: Thu Jun 4 13:09:29 2009 -0600
8050 add a distclean target to src/Makefile
8052 commit 176052b7c14fcad067835ecb550778faf67cf4da
8053 Author: Bdale Garbee <bdale@gag.com>
8054 Date: Thu Jun 4 13:07:10 2009 -0600
8056 add lib to the front of the subdir list
8058 commit 208bc15714c7b4020c017eef19011c4eb9ab51e2
8059 Author: Keith Packard <keithp@keithp.com>
8060 Date: Thu Jun 4 11:20:10 2009 -0700
8062 Move build and debug tools to 'cctools' directory.
8064 These tools were merged in from the ccdbg package.
8066 Signed-off-by: Keith Packard <keithp@keithp.com>
8068 commit 17d2432a8b9c15963cd3b821f025ad33972ef477
8069 Merge: 210dbaa 8a9a3f0
8070 Author: Keith Packard <keithp@keithp.com>
8071 Date: Thu Jun 4 11:13:15 2009 -0700
8073 Merge ccdbg and altos sources into one giant repository
8075 Keeping these separate isn't making things any easier.
8077 Signed-off-by: Keith Packard <keithp@keithp.com>
8079 commit 210dbaa23cdacf3a6f2d6e23493e96ee2ac9bca7
8080 Author: Keith Packard <keithp@keithp.com>
8081 Date: Thu Jun 4 10:41:34 2009 -0700
8083 Use autotools, move altos to src subdir
8085 Signed-off-by: Keith Packard <keithp@keithp.com>
8087 commit 8cce307bb3156584ba17ae5a787f645dfee5fb94
8088 Author: Keith Packard <keithp@keithp.com>
8089 Date: Thu Jun 4 10:25:30 2009 -0700
8091 Make menu seperator insensitive
8093 commit 778cae8fc5a4b30e5045e4703316fc61ae18562a
8094 Author: Keith Packard <keithp@keithp.com>
8095 Date: Wed Jun 3 17:07:34 2009 -0700
8097 aoview: Add eeprom data fetching
8099 Fetches the last flight data from a TM device connected via USB and writes
8100 it to the flight log directory.
8102 Signed-off-by: Keith Packard <keithp@keithp.com>
8104 commit bf140966e9649e75b884c8aa5f25ffbf9eed10ea
8105 Author: Keith Packard <keithp@keithp.com>
8106 Date: Wed Jun 3 10:57:46 2009 -0700
8108 Stop log dumping at flight end. Print 'end' at end of log.
8110 No reason to continue dumping data past the end of the flight now that the
8111 logging stuff has been demonstrated to work reliably. Also, to make
8112 automated log dumping easier, this prints out 'end' after the log data so
8113 that aoview knows when to stop reading.
8115 Signed-off-by: Keith Packard <keithp@keithp.com>
8117 commit 35ac66969abe24ca23776618306a59fc17770e06
8118 Author: Keith Packard <keithp@keithp.com>
8119 Date: Sun May 31 09:22:01 2009 -0700
8121 Start adding bi-directional packet link
8123 commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9
8124 Author: Keith Packard <keithp@keithp.com>
8125 Date: Thu May 28 23:17:33 2009 -0700
8127 Eliminate RDF tone generation.
8129 Now that we have a viable telemetry-signal based RDF device via TeleDongle,
8130 there's no reason to continue to waste power and bandwidth with a NFM tone.
8132 Signed-off-by: Keith Packard <keithp@keithp.com>
8134 commit 4d83eef0fe1d24a845ab29a535dfc56e13e7ee20
8135 Author: Keith Packard <keithp@keithp.com>
8136 Date: Thu May 28 23:17:25 2009 -0700
8138 Change .gitignore to match new aoload procedure
8140 commit dcfcf3bec6788460b6fe8c239c80bad4526bd15b
8141 Author: Keith Packard <keithp@keithp.com>
8142 Date: Wed May 27 22:01:37 2009 -0700
8144 Leave serial number writing to aoload
8146 Instead of building per-serial hex files, leave that
8147 process to the new aoload program
8149 Signed-off-by: Keith Packard <keithp@keithp.com>
8151 commit 8a9a3f02b951382573ff74dd6ce5a1c0f335fa86
8152 Author: Keith Packard <keithp@keithp.com>
8153 Date: Wed May 27 21:53:15 2009 -0700
8155 Add aoload to load serial-numbered altos binaries.
8157 aoload is a custom version of ccload which edits the data before sending it
8158 to the target machine, writing the target serial number into the data.
8160 Signed-off-by: Keith Packard <keithp@keithp.com>
8162 commit 5a7a63c34b778e40a61ddabd16ec1af9a2be50c3
8163 Author: Keith Packard <keithp@keithp.com>
8164 Date: Sat May 23 21:20:12 2009 -0700
8166 Fix aoview telemetry GPS parsing code to use correct columns
8168 This code was trying to pull the GPS data from the wrong columns, causing
8169 aoview to fail to display GPS information.
8171 Signed-off-by: Keith Packard <keithp@keithp.com>
8173 commit 26988c3e7acb2fa832810475e43e08fd2867459c
8174 Author: Keith Packard <keithp@keithp.com>
8175 Date: Sat May 23 21:18:57 2009 -0700
8177 Parse both telemetry or log data ao_flight_test
8179 Change the way data is fed from files to the flight test rig to handle
8180 either kind of input file.
8182 Signed-off-by: Keith Packard <keithp@keithp.com>
8184 commit d6f5a0689023546464a71561f53fa2c943077c88
8185 Author: Keith Packard <keithp@keithp.com>
8186 Date: Sat May 23 21:16:22 2009 -0700
8188 Avoid 16-bit overflow in velocity computation.
8190 Adding two 16 bit integers together can wrap around to negative numbers,
8191 this resulted in velocity values which never decreased, making the switch
8192 from coast to apogee state not occur.
8194 Signed-off-by: Keith Packard <keithp@keithp.com>
8196 commit aa6d87aeb616dd62f0debaded297232022b4f8bd
8197 Author: Keith Packard <keithp@keithp.com>
8198 Date: Wed May 20 09:44:55 2009 -0700
8200 Make file handling more general so it can be reused.
8202 The log file handling stuff will be useful for saving eeprom data, so pull
8203 it out of the real-time log handling code and make a general interface.
8205 Signed-off-by: Keith Packard <keithp@keithp.com>
8207 commit b730c8bcbce649cdddba935e1112aaae538bc526
8208 Author: Keith Packard <keithp@keithp.com>
8209 Date: Sun May 17 23:54:44 2009 -0700
8211 Ignore aoview_glade.h
8213 commit 91b07410122d0eaaf292cdb31c200925d45eaf2c
8214 Author: Keith Packard <keithp@keithp.com>
8215 Date: Sun May 17 23:36:21 2009 -0700
8217 Transmit computed ground pressure and acceleration values
8219 These are the last two values relevant to figuring out the state of the
8220 flight computer, and as they are computed by averaging 10 seconds of 100Hz
8221 sample data, they're a lot more accurate than anything the receiver could do
8224 Signed-off-by: Keith Packard <keithp@keithp.com>
8226 commit 71d1689759829f1bc8550f1a4d8c9f2dc90b2ab4
8227 Author: Keith Packard <keithp@keithp.com>
8228 Date: Sun May 17 23:18:09 2009 -0700
8230 Provide install target
8232 commit f301b95e87c8ec1e3b58d595a05d486bede5e0c2
8233 Author: Keith Packard <keithp@keithp.com>
8234 Date: Sun May 17 23:13:20 2009 -0700
8236 Embed glade file in executable
8238 This eliminates install issues nicely.
8240 Signed-off-by: Keith Packard <keithp@keithp.com>
8242 commit 26361686d6fc63dc22d22285f0543c5c2c756fb4
8243 Author: Keith Packard <keithp@keithp.com>
8244 Date: Sun May 17 23:05:23 2009 -0700
8246 Add About dialog to aoview.
8248 Signed-off-by: Keith Packard <keithp@keithp.com>
8250 commit 0f3233c49f43cd4e372e613303919ce4d50255b2
8251 Author: Keith Packard <keithp@keithp.com>
8252 Date: Sun May 17 22:44:19 2009 -0700
8254 USB device names can contain '.' too
8256 Depending on the hierarchy of devices, names can contain '.', so allow those
8259 Signed-off-by: Keith Packard <keithp@keithp.com>
8261 commit 33221277690e6ee30387c506c3f2b8237ed48efd
8262 Author: Keith Packard <keithp@keithp.com>
8263 Date: Sun May 17 22:43:34 2009 -0700
8265 scandir returns -1 on error
8267 In which case, the namelist is invalid, so don't look at it, and don't free
8270 Signed-off-by: Keith Packard <keithp@keithp.com>
8272 commit 7cb9fb675f56bf30ab6bf0bcdc5cb679709ffe3e
8273 Author: Keith Packard <keithp@keithp.com>
8274 Date: Sun May 17 22:29:54 2009 -0700
8276 Send computed accel/vel/pres values over the radio
8278 These computed values reflect what the flight computer is actually refering
8279 to for state changes, and will be useful in debugging the flight software as
8280 well as provide a filtered view of the data.
8282 Signed-off-by: Keith Packard <keithp@keithp.com>
8284 commit 2c780d67b8a22d75a2da4b2af21fd35f0c6f5236
8285 Author: Keith Packard <keithp@keithp.com>
8286 Date: Sun May 17 22:29:06 2009 -0700
8288 Handle disappearing serial devices
8290 Put up a dialog when the serial open fails, and shut down monitoring when
8291 the serial device disappears while running.
8293 Signed-off-by: Keith Packard <keithp@keithp.com>
8295 commit 69616104813fc5ba89fb3128d04fb9328961c59c
8296 Author: Keith Packard <keithp@keithp.com>
8297 Date: Sun May 17 22:24:53 2009 -0700
8299 While on the pad, zero out velocity every second
8301 We integrate acceleration to get velocity, but that means sitting on the pad
8302 for a long time can add substantial error to the velocity value. Each
8303 second, take the velocity value from a full second ago and subtract that out
8304 of the current velocity. Once we detect boost, this will stop, which means
8305 that as long as we detect boost within a second, we won't have subtracted
8306 out any "real" velocity.
8308 This keeps the pad velocity hovering around zero, which is pretty useful.
8310 Signed-off-by: Keith Packard <keithp@keithp.com>
8312 commit 1234694eb903b204488ddc7cb30bcfe34bf1e677
8313 Author: Keith Packard <keithp@keithp.com>
8314 Date: Sun May 17 01:29:06 2009 -0700
8316 Clear table, reset log on disconnect
8318 commit 4316b6af86b37522038e642235c163fcaad52e96
8319 Author: Keith Packard <keithp@keithp.com>
8320 Date: Sun May 17 01:28:16 2009 -0700
8322 Add pad lat/lon, max accel, max height
8324 Signed-off-by: Keith Packard <keithp@keithp.com>
8326 commit 4348281bd788a13ea700413537f12da3c00356e4
8327 Author: Keith Packard <keithp@keithp.com>
8328 Date: Sun May 17 00:46:09 2009 -0700
8330 Clean up GPS display
8332 Signed-off-by: Keith Packard <keithp@keithp.com>
8334 commit ff68e38770351ddac3285ce275cd85adab01fd3d
8335 Author: Keith Packard <keithp@keithp.com>
8336 Date: Sun May 17 00:45:38 2009 -0700
8338 Make aoview window taller
8340 Signed-off-by: Keith Packard <keithp@keithp.com>
8342 commit be3f4fed7b863c8cdaabe32b61b65a8b3cd11355
8343 Author: Keith Packard <keithp@keithp.com>
8344 Date: Sun May 17 00:13:45 2009 -0700
8346 Add lots more aoview UI bits
8348 Logs data to files, displays current state in window.
8350 Signed-off-by: Keith Packard <keithp@keithp.com>
8352 commit 93d7ce8e054515ed7b166eb042ae7f47e564d21d
8353 Author: Keith Packard <keithp@keithp.com>
8354 Date: Sat May 16 20:45:26 2009 -0700
8356 When logging starts up, right the whole ring to the log.
8358 This preserves the data pre boost-detect for later analysis.
8360 Signed-off-by: Keith Packard <keithp@keithp.com>
8362 commit fec4212a59a7b3321536b25707dcabc43c797c33
8363 Author: Keith Packard <keithp@keithp.com>
8364 Date: Sat May 16 20:04:31 2009 -0700
8366 Abandon use of accelerometer for apogee detect.
8368 Integrating the accelerometer data to compute velocity worked for one rocket
8369 flight, but additional testing shows that it doesn't work in other
8370 airframes. Until we figure out how this should work, we'll rely on the
8371 altimeter to detect apogee.
8373 Signed-off-by: Keith Packard <keithp@keithp.com>
8375 commit 09771c644de54ae354e8f98af7ba74289b3c0fcc
8376 Author: Keith Packard <keithp@keithp.com>
8377 Date: Sat May 16 02:25:04 2009 -0700
8379 Add preliminary aoview code
8381 AoView connects with TeleDongle to present telemetry information in a
8382 reasonable form. Right now, it just displays information to stdout, but it
8383 does have fancy dialogs for finding the USB devices.
8385 Signed-off-by: Keith Packard <keithp@keithp.com>
8387 commit 37250b00f6286aee4b3b28604f5d463db3079a89
8388 Author: Keith Packard <keithp@keithp.com>
8389 Date: Wed May 13 20:41:54 2009 -0700
8391 Discard usb output before connection. Handle USB reset.
8393 Discarding output before USB is plugged in allows threads that send output
8394 and do other things to work without a USB connection. Unfortuantely, there
8395 doesn't appear to be any way to detect when the USB link is disconnected,
8396 which means that once USB is enabled, future writes will continue to block.
8398 USB reset causes the USB interrupts to all be reconfigured back to power-on
8401 Signed-off-by: Keith Packard <keithp@keithp.com>
8403 commit 9b974217958b1017e62d6c4f4568f547ccc30c58
8404 Author: Keith Packard <keithp@keithp.com>
8405 Date: Wed May 13 20:40:42 2009 -0700
8407 Enable radio monitor by default in teleterra, teledongle and tidongle
8409 These ground loads want to monitor the radio constantly, and not require use
8410 of the 'm' command before listening.
8412 Signed-off-by: Keith Packard <keithp@keithp.com>
8414 commit 25fc03a333b2cfad0a93ebc385fbcf74b63c229e
8415 Author: Keith Packard <keithp@keithp.com>
8416 Date: Wed May 13 20:39:28 2009 -0700
8418 Remove monitor/rssi functions from telemetrum load
8420 Telemetrum is now a flight-only load, use teleterra or teledongle for ground
8423 Signed-off-by: Keith Packard <keithp@keithp.com>
8425 commit 05493b98eb1ae4d30cb0b600849d70b03fa33594
8426 Author: Keith Packard <keithp@keithp.com>
8427 Date: Wed May 13 20:38:11 2009 -0700
8429 Split out ao_state_names to separate file
8431 Allows state names to be used in programs without monitoring enabled.
8433 Signed-off-by: Keith Packard <keithp@keithp.com>
8435 commit d085d43701e3cdd2119e947a9ae45baa78c80318
8436 Author: Keith Packard <keithp@keithp.com>
8437 Date: Wed May 13 14:29:30 2009 -0700
8439 Indicate RSSI with a blinking LED
8441 Blink the red LED at a rate proportional to the RSSI value.
8443 Signed-off-by: Keith Packard <keithp@keithp.com>
8445 commit 055331d5f7d5adc40c348c3efd331a562dcda82a
8446 Author: Keith Packard <keithp@keithp.com>
8447 Date: Wed May 13 11:19:13 2009 -0700
8449 Make ao_flight_test show AGL altitude and positive acceleration under boost
8451 This makes the output more readable
8453 Signed-off-by: Keith Packard <keithp@keithp.com>
8455 commit d91208fbf5fc7797b93087ef8619454c4bed0130
8456 Author: Keith Packard <keithp@keithp.com>
8457 Date: Wed May 13 11:18:24 2009 -0700
8459 Make ao_flight_test able to read raw logging data
8461 Protect ao_flight_test reading functions so that a simple
8462 'script' output can be fed to the program and have it work correctly.
8464 Signed-off-by: Keith Packard <keithp@keithp.com>
8466 commit d3dbd8949e1102220ad5fd0863f493c819b96e46
8467 Author: Keith Packard <keithp@keithp.com>
8468 Date: Wed May 13 11:16:53 2009 -0700
8470 Print only RSSI when packet CRC is invalid
8472 Packets with invalid CRC usually contain bogus data, so don't print that,
8473 just print out the RSSI which may contain useful data.
8475 Signed-off-by: Keith Packard <keithp@keithp.com>
8477 commit 8168820b667cc1deffab64dd81cb4e6e2e6eabe4
8478 Author: Keith Packard <keithp@keithp.com>
8479 Date: Wed May 13 11:00:43 2009 -0700
8481 Accelerometer-based velocity values are invalid after apogee
8483 Because the orientation of the flight computer relative to the ground is
8484 unknown after apogee, the accelerometer data cannot be integrated to compute
8485 velocity. Main deploy is now based purely on barometric altitude and landing
8486 detection no longer checks for a low velocity value.
8488 Signed-off-by: Keith Packard <keithp@keithp.com>
8490 commit 24fdda44ff8604e40510b196ead17564d8f8cd3d
8491 Author: Keith Packard <keithp@keithp.com>
8492 Date: Wed May 13 10:59:04 2009 -0700
8494 Add velocity check for boost detect via accelerometer
8496 Bumping the rocket can cause a brief period of high acceleration, which may
8497 cause a mistaken boost detection. Require both a high acceleration and
8498 reasonable velocity to trigger boost phase.
8500 Signed-off-by: Keith Packard <keithp@keithp.com>
8502 commit 7a1aa3fdbc0d1fae5e7ee027bf8904598c6ebe41
8503 Author: Keith Packard <keithp@keithp.com>
8504 Date: Wed May 13 10:58:30 2009 -0700
8508 commit 497c89a7d08920630894b2605c3b6a0bdc4c229b
8509 Author: Keith Packard <keithp@keithp.com>
8510 Date: Sun May 10 23:11:06 2009 -0700
8512 Use recorded accelerometer baseline data in ao_flight_test
8514 With the flight computer recording a long-term average value for the
8515 accelerometer in the flight record, use that to prime the flight test code
8516 when running a log file through the simulator.
8518 Signed-off-by: Keith Packard <keithp@keithp.com>
8520 commit ba3c53636e485450f48093d0a88a6629775f7c3a
8521 Author: Keith Packard <keithp@keithp.com>
8522 Date: Sun May 10 23:01:16 2009 -0700
8524 Don't re-initialize the landing range data at each apogee detect sample
8526 The landing range values are used only after apogee detect, so we need only
8527 initialize them on the transition from apogee to drogue.
8529 Signed-off-by: Keith Packard <keithp@keithp.com>
8531 commit b623b1098bc7a10d471730259438fb82804221d0
8532 Author: Keith Packard <keithp@keithp.com>
8533 Date: Sun May 10 23:00:06 2009 -0700
8535 Initialize ao_min_vel with |ao_flight_vel|
8537 As ao_min_vel is stored as an absolute value, it's important to preserve
8538 that invariant, even though we don't expect ao_flight_vel to be negative at
8541 Signed-off-by: Keith Packard <keithp@keithp.com>
8543 commit e9584e846b9bd7926d61451d32ba5d7a30416f7b
8544 Author: Keith Packard <keithp@keithp.com>
8545 Date: Sun May 10 22:58:31 2009 -0700
8547 Decrease telemetry rate on the pad to 1/sec instead of 20/sec
8549 Transmitting telemetry through the radio consumes a significant amount of
8550 battery; reducing the rate to 1/sec will reduce power usage while waiting
8553 Signed-off-by: Keith Packard <keithp@keithp.com>
8555 commit 97cecb517cd7bf75e1219c76a93bfe6964c07052
8556 Author: Keith Packard <keithp@keithp.com>
8557 Date: Sun May 10 22:57:19 2009 -0700
8559 Increase the initial accel/baro average to 1000 samples
8561 To get an accurate baseline of the launchpad state, take a longer average of
8562 the two sensors as the unit boots up.
8564 Signed-off-by: Keith Packard <keithp@keithp.com>
8566 commit 98806b1ff3f41484663d61ff430e9e2764c7b5e6
8567 Author: Keith Packard <keithp@keithp.com>
8568 Date: Sun May 10 22:54:14 2009 -0700
8570 Record average accelerometer value in flight start log record
8572 The average accelerometer value cannot be extracted from the log as the
8573 record starts after that is computed. As that drives much of the
8574 accelerometer-based state transition logic, it is an important value to
8575 have, so we log it as part of the flight start record now.
8577 Signed-off-by: Keith Packard <keithp@keithp.com>
8579 commit a12edbfe21fe27a9efbf87bacda9ab4806256e2b
8580 Author: Keith Packard <keithp@keithp.com>
8581 Date: Sat May 9 10:24:10 2009 -0700
8583 Add version command to show product information
8585 commit e80b87f5e3ccf152d67a2e87bdefda161c455599
8586 Author: Keith Packard <keithp@keithp.com>
8587 Date: Sat May 9 10:23:49 2009 -0700
8589 Pad callsign with nuls
8591 commit beae3360828da21eb1a3c4f88e930f242d4e36b7
8592 Author: Keith Packard <keithp@keithp.com>
8593 Date: Fri May 1 08:14:57 2009 -0700
8595 USB spec limits bulk endpoints to 64 byte payload max.
8597 For full-speed devices, bulk endpoints may use 8, 16, 32 or 64 bytes, but no
8600 commit de7814c738488c2c16c6216c93fa78128895e5d5
8601 Author: Keith Packard <keithp@keithp.com>
8602 Date: Wed Apr 29 17:46:56 2009 -0700
8604 Use 'char' instead of 'uint8_t' for character data
8606 String and character constants are of char type, so using uint8_t causes
8607 promotion to 16-bit types when comparing the two.
8609 commit 4ae74fffb939d67424efa3e7f433637f1f920ebc
8610 Author: Keith Packard <keithp@keithp.com>
8611 Date: Wed Apr 29 17:46:36 2009 -0700
8613 Eliminate incorrect cast in printf string argument
8615 char * is a pointer to a string in the default address space, not a generic pointer
8616 to a string. As such, the compiler (at least 2.9.0) mis-compiles this if the
8619 commit 39f2a3c6bd501d12a92bfd38434ce67bb5beb70d
8620 Author: Keith Packard <keithp@keithp.com>
8621 Date: Wed Apr 29 17:44:41 2009 -0700
8623 Correct radio frequency shown in config display.
8625 Radio frequency base is 434.550, not 435.550
8627 commit 75ca1751b7cac2f8074d0713ee96d6ab45b54f19
8628 Author: Keith Packard <keithp@keithp.com>
8629 Date: Wed Apr 29 17:42:26 2009 -0700
8631 Reset landing interval tests at apogee
8633 This moves all of the interval management into the landing test code and
8634 out of the main loop. The interval is reset at apogee to make sure the
8635 sensors produce a stable reading for at least 20 seconds
8637 commit 7a1b77c2d7253a681389f32b70e2460aac188807
8638 Author: Bdale Garbee <bdale@gag.com>
8639 Date: Sun Apr 26 17:53:13 2009 -0600
8641 clean up host programs, too
8643 commit 5df80c346d65a9d56a8699b056dc44924acb31fe
8644 Author: Keith Packard <keithp@keithp.com>
8645 Date: Sun Apr 26 16:04:07 2009 -0700
8647 Was missing v_batt in adc dump command
8649 commit c3fec2c4c65db71e88ef0c05c69463438a7cfc6c
8650 Author: Keith Packard <keithp@keithp.com>
8651 Date: Sun Apr 26 15:38:28 2009 -0700
8653 Add manual ignition and igniter test commands
8655 commit 819f1de8dd6010fae050bcef930943c7923929f9
8656 Author: Keith Packard <keithp@keithp.com>
8657 Date: Sun Apr 26 15:38:03 2009 -0700
8659 Clean up commands a bit
8661 commit 178abb5c8439509926a5507911d7148b84f051b8
8662 Author: Keith Packard <keithp@keithp.com>
8663 Date: Sun Apr 26 15:08:58 2009 -0700
8665 Clear more files on make clean
8667 commit 70a69f3acdca27b80cdb2069de59bbc6dba83dbd
8668 Author: Keith Packard <keithp@keithp.com>
8669 Date: Sun Apr 26 15:05:29 2009 -0700
8671 Label binaries with product and serial info
8673 commit 5ed3b1cb52b573db1fee9655a29a0e6dd72f53fe
8674 Author: Keith Packard <keithp@keithp.com>
8675 Date: Sun Apr 26 01:37:02 2009 -0700
8677 Make sure full log is written and flushed on landing.
8679 The final state change to landing is recorded in the logging thread, so have
8680 that turn off logging once it has recorded that state. Then make it go to
8683 commit 2e737ad00cad5d893b252d8aa9dbff3d9b800731
8684 Author: Keith Packard <keithp@keithp.com>
8685 Date: Sun Apr 26 01:36:53 2009 -0700
8687 Clean up monitor output a bit
8689 commit 38a0b61b0a0b3c00f064c8d562950a17a6ddff4a
8690 Author: Keith Packard <keithp@keithp.com>
8691 Date: Sun Apr 26 00:11:32 2009 -0700
8693 Add configuration support
8695 Current config variables:
8696 Main deploy altitude above launch (in meters)
8697 Acceleration zero g calibration (manual or automatic)
8698 Radio channel (freq = 435.550MHz + channel * 100kHz)
8699 Callsign (max 8 characters)
8701 Supporting this involved shuffling code around so that the
8702 non-telemetrum builds could include only the stuff they needed.
8704 commit c65f1a1acd2ca00758833cec5d3f8056d303d3e2
8705 Author: Keith Packard <keithp@keithp.com>
8706 Date: Sat Apr 25 14:44:33 2009 -0700
8708 Allow for slower ADC operation. Add power saving code.
8710 This tries to make the flight computer use less power by disabling USB in
8711 flight mode, lowering the telemetry rate after ascent. It also disables the
8712 RDF beacon during ascent and re-enables it once descent has started.
8714 commit 8e7b48b5f090be81980ab00fbce814ae1cc253e4
8715 Author: Keith Packard <keithp@keithp.com>
8716 Date: Sat Apr 25 14:44:04 2009 -0700
8718 Allow ADC to be disabled
8720 commit 7bc3d9962872850e7b420221cf689db16b4305cc
8721 Author: Keith Packard <keithp@keithp.com>
8722 Date: Sat Apr 25 14:43:23 2009 -0700
8724 Place CPU in P0 state while idle
8726 commit e45fce7f82d704d677f84c69b0e07588d109d780
8727 Author: Keith Packard <keithp@keithp.com>
8728 Date: Sat Apr 25 14:42:20 2009 -0700
8730 Add RDF beacon and callsign to telemetry
8732 commit 61510f98404bca6861b2da98f6cd9ba9deb76968
8733 Author: Keith Packard <keithp@keithp.com>
8734 Date: Sat Apr 25 14:40:51 2009 -0700
8736 Add radio code to emit a 1kHz tone
8738 commit 0f07803d84b5ac89500ee33a6818c50583e3ff7f
8739 Author: Keith Packard <keithp@keithp.com>
8740 Date: Sat Apr 25 13:18:37 2009 -0700
8742 Allow the USB system to be disabled/enabled at run-time
8744 commit 45976af820fc41099928df71ea8304c56eb9fc7c
8745 Author: Keith Packard <keithp@keithp.com>
8746 Date: Sat Apr 25 13:16:27 2009 -0700
8748 Make LED usage depend on target device
8750 commit 4a050704ad2c497e9f1b0988334228b0bbc4c170
8751 Author: Keith Packard <keithp@keithp.com>
8752 Date: Sat Apr 25 13:13:24 2009 -0700
8754 Make some functions reentrant to save DSEG space
8756 commit 6b3d25a6d6d7847765eb03b836913dd5ecef2993
8757 Author: Keith Packard <keithp@keithp.com>
8758 Date: Fri Apr 24 19:17:37 2009 -0700
8760 Add monitor task to flight software
8762 Allows the use of telemetrum in teledongle mode.
8764 commit ad0d2d88a91cbd02c56ea5ff6dab23e16aec6510
8765 Author: Keith Packard <keithp@keithp.com>
8766 Date: Fri Apr 24 19:17:19 2009 -0700
8768 Report difference from ground to max altitude at landing
8770 commit f94ab879ff6f97708827c74facd11003a2d8b590
8771 Author: Keith Packard <keithp@keithp.com>
8772 Date: Fri Apr 24 19:16:29 2009 -0700
8774 Display data with units while running simulation
8776 commit 6fb26340b150e831a8a9e25e3b68074c29e48dbe
8777 Author: Keith Packard <keithp@keithp.com>
8778 Date: Fri Apr 24 19:13:31 2009 -0700
8780 Enabling apogee detect via speed: < 200m/s && < max_speed - 50m/s
8782 This change ensures that we actually got going fairly fast, and then slowed
8783 down a bunch before enabling apogee detect. Otherwise, we'll detect apogee
8784 right off the pad as we're not going very fast at that point...
8786 This also adds the 'f' command to show the current flight status on the USB
8789 commit 20b9f304ecbddd73a0ee2461b4c5e80f08157f98
8790 Author: Keith Packard <keithp@keithp.com>
8791 Date: Fri Apr 24 19:12:28 2009 -0700
8793 configure igniter ports, set values to measured ones
8795 commit 6bf1d91ce0b723abe2bcec89668c13135ec044cf
8796 Author: Keith Packard <keithp@keithp.com>
8797 Date: Fri Apr 24 19:11:40 2009 -0700
8799 Move ao_led_init to end of file to be consistent with other files
8801 commit b4de7d550ec9a09ccf5f6a72debc6646706e3516
8802 Author: Keith Packard <keithp@keithp.com>
8803 Date: Fri Apr 24 19:10:20 2009 -0700
8805 Define ao_state_names in ao.h so other people can share
8807 commit 8e62747b3692d0ac75b08eaf5c3e4b5d766be6ad
8808 Author: Keith Packard <keithp@keithp.com>
8809 Date: Fri Apr 24 19:09:31 2009 -0700
8813 commit 2f781beb73ef24ab5fbe2688a83d07ad26c15972
8814 Author: Keith Packard <keithp@keithp.com>
8815 Date: Fri Apr 24 19:09:09 2009 -0700
8817 Move beep_init to end of file to be consistent with other files
8819 commit b99315cee4ab796376458a2442cf36806fa4aed3
8820 Author: Keith Packard <keithp@keithp.com>
8821 Date: Fri Apr 24 10:19:31 2009 -0700
8823 Update flight algorithm based on data collected from SN-1 Flight 1
8825 This now correctly sequences through the flight data collected from the
8826 first TeleMetrum test flight.
8828 This also completes up the flight algorithm test harness (ao_flight_test),
8829 which runs the flight algorithm on the Linux host from a captured data log.
8831 commit b32f2f0090ff967edac07ae4d7a9895ed0b96d31
8832 Author: Keith Packard <keithp@keithp.com>
8833 Date: Thu Apr 23 22:17:44 2009 -0700
8835 Add igniters and update flight control algorithm
8837 commit f155333ae18a25068644792e8940269d9fb28033
8838 Author: Keith Packard <keithp@keithp.com>
8839 Date: Fri Apr 24 00:15:09 2009 -0700
8841 Avoid ram from 0xfda2 through feff, its funky
8843 commit f9c1c545c9dc11c3190a6cf7504883131fffce2f
8844 Author: Keith Packard <keithp@keithp.com>
8845 Date: Thu Apr 23 22:18:33 2009 -0700
8847 remove ao_flight_test until its ready
8849 commit 86e73c009f78dc4664883353124fc891fbb01dce
8850 Author: Keith Packard <keithp@keithp.com>
8851 Date: Thu Apr 23 20:50:07 2009 -0700
8853 Add teledongle module
8855 commit 204daac71ad56926730f5d6860bd70c645302e19
8856 Author: Keith Packard <keithp@keithp.com>
8857 Date: Thu Apr 23 14:26:01 2009 -0700
8859 Set telemetry rate to 100ms
8861 commit 306b28f632e21b42ab165e7944283cf9764b590e
8862 Author: Keith Packard <keithp@keithp.com>
8863 Date: Thu Apr 23 14:23:26 2009 -0700
8865 Wrong license on ao_monitor.c
8867 commit dca3a6de26d26c0020f3fb2cf5d8ac1552c195b1
8868 Author: Keith Packard <keithp@keithp.com>
8869 Date: Thu Apr 23 14:23:00 2009 -0700
8871 Crank up radio to 10dBm
8873 commit fbe3096f7e9a8112dbc79f376eccdaa6872ae520
8874 Author: Keith Packard <keithp@keithp.com>
8875 Date: Wed Apr 22 16:03:28 2009 -0700
8879 commit 9b7788f18bbaf3c4e5ebbf6c5ebd926468b0e045
8880 Author: Keith Packard <keithp@keithp.com>
8881 Date: Wed Apr 22 15:55:01 2009 -0700
8883 Clean up TeleTerra files
8885 commit 61cee50c86e275f9fde875bd317c3e74255394ec
8886 Author: Keith Packard <keithp@keithp.com>
8887 Date: Wed Apr 22 15:53:55 2009 -0700
8889 simplify ao_time function
8891 commit 3703ecdc9e190f2e0b7ead0e71b78be881c1f3b7
8892 Author: Keith Packard <keithp@keithp.com>
8893 Date: Wed Apr 22 15:53:46 2009 -0700
8895 One line radio status
8897 commit 1fbb3c17672a03ea6318fee07f9c2dcd7a8d0b16
8898 Author: Keith Packard <keithp@keithp.com>
8899 Date: Wed Apr 22 15:49:16 2009 -0700
8901 Add new binaries to .gitignore
8903 commit 00d5610caff61559eb24c24beaa56629d6bb03be
8904 Author: Keith Packard <keithp@keithp.com>
8905 Date: Wed Apr 22 15:49:00 2009 -0700
8907 Speed up dbg port bit frobbing
8909 commit c7555eb16876aa8ff9fe7f648d325a1b8fb54d23
8910 Author: Keith Packard <keithp@keithp.com>
8911 Date: Wed Apr 22 15:48:28 2009 -0700
8915 commit ada6dea04b94be016598566c4c13e6105aaec353
8916 Author: Keith Packard <keithp@keithp.com>
8917 Date: Wed Apr 22 15:48:14 2009 -0700
8919 Clean up task list formatting
8921 commit 0a1b2297ee9f5bbb918bd72f26088a3e0b84839a
8922 Author: Keith Packard <keithp@keithp.com>
8923 Date: Wed Apr 22 15:47:57 2009 -0700
8925 Control radio monitoring with the M command
8927 commit 837c620f07b63efc171be3ac14c78bc99adf7592
8928 Author: Keith Packard <keithp@keithp.com>
8929 Date: Wed Apr 22 14:25:43 2009 -0700
8931 Shrink USB output buffers, work around USB packet errors
8933 commit d87e9c25947d7cc2eba8894a524977f2c55a089a
8934 Author: Keith Packard <keithp@keithp.com>
8935 Date: Tue Apr 21 02:07:24 2009 -0700
8937 Clean up telemetry now that all packets are the same
8939 commit 1b333def5052d2ed47fdeaef23a897fe326f6340
8940 Author: Keith Packard <keithp@keithp.com>
8941 Date: Tue Apr 21 02:07:08 2009 -0700
8943 Add longer debug delays to reset/debug_mode entry
8945 commit d1887ded41a5bfec8e10e9fd736fa9444b9b6222
8946 Author: Keith Packard <keithp@keithp.com>
8947 Date: Tue Apr 21 01:17:03 2009 -0700
8949 Fix up fancy dbg stuff. Add teleterra initial bits.
8951 The dbg stuff needed a bit of help to actually walk the tables; it appears
8952 that complex expressions confuse sdcc.
8954 This also adds primitive teleterra bits, but no UI, etc.
8956 Signed-off-by: Keith Packard <keithp@keithp.com>
8958 commit 43c8f7012102cdb591ace899420c10e4a78385ad
8959 Author: Keith Packard <keithp@keithp.com>
8960 Date: Mon Apr 20 23:33:41 2009 -0700
8962 Add radio support. Build separate executables for TeleMetrum and the TI dongle
8964 Ok, way too big a patch, but things were in rough shape.
8965 This patch adds support for the radio, both transmit and receive.
8966 Then, because I could no longer run the TeleMetrum code on the TI
8967 dongle, I ended up building a separate image for the TI board, which
8968 involved creating a mechanism for having multiple command sets and splitting
8969 code for different functions into different files.
8971 commit 5be13b76a2e29b84cd6d1eec065e3354b0dafce5
8972 Author: Keith Packard <keithp@keithp.com>
8973 Date: Sat Apr 18 23:19:24 2009 -0700
8975 Start using pdata area for less-frequently used data
8977 commit 3e18b5a0d4c7d84df98b6ed0b7783de1d42d45bf
8978 Author: Keith Packard <keithp@keithp.com>
8979 Date: Sat Apr 18 23:19:05 2009 -0700
8981 Slow down panic presentation
8983 commit c4e983daa4579896b227fdcb2be43fad75e94307
8984 Author: Keith Packard <keithp@keithp.com>
8985 Date: Sat Apr 18 23:17:45 2009 -0700
8987 Parse GPS data locally. Add 'g' command to display recent GPS results.
8989 This parses the GPS GGA message and stores it in a global variable,
8990 protected by a mutex.
8992 commit ed6f67dc47d750d5ff8bea63ae7cbb560689b9b6
8993 Author: Keith Packard <keithp@keithp.com>
8994 Date: Sat Apr 18 23:16:01 2009 -0700
8996 Add task names and 'T' command to show task status.
8998 The T command shows the current wchan and PC for each task in the system.
9000 commit 3d5a5fc4db5f681e848202c4ee4099d2879677d6
9001 Author: Keith Packard <keithp@keithp.com>
9002 Date: Sat Apr 18 19:32:18 2009 -0700
9004 Fix GPL version at 2
9006 Signed-off-by: Keith Packard <keithp@keithp.com>
9008 commit 022f83ca6fd589005d8eb3e25e633950fef69fa7
9009 Author: Keith Packard <keithp@keithp.com>
9010 Date: Fri Apr 17 23:38:14 2009 -0700
9012 Add gps, debug dongle support and pressure alt tables
9014 GPS also pulled in serial support. The altitude tables take raw 11-bit
9015 pressure sample numbers and convert them to standard pressure altitude
9018 Signed-off-by: Keith Packard <keithp@keithp.com>
9020 commit 31fce622b1bab7e3f421069d7f6d4d9bdcd825de
9021 Author: Keith Packard <keithp@keithp.com>
9022 Date: Fri Apr 17 10:32:45 2009 -0700
9024 Enable FEC in radio packets
9026 commit 293a357911090a2f37bdd6f7ea96942079ffdf2e
9027 Author: Keith Packard <keithp@keithp.com>
9028 Date: Fri Apr 17 10:29:42 2009 -0700
9030 Add CRC to radio packets
9032 commit 20834caf01ddf481e8362b0d2627ef383a82e09d
9033 Author: Keith Packard <keithp@keithp.com>
9034 Date: Fri Apr 17 10:23:10 2009 -0700
9038 commit 94e5343a72121a81ab19bf5025e6b6fc9847eb4f
9039 Author: Keith Packard <keithp@keithp.com>
9040 Date: Fri Apr 17 10:19:25 2009 -0700
9042 Add packet status byte defines
9044 commit 04bc51c170c6f22bb5cc16867ce9a307818a7a00
9045 Author: Keith Packard <keithp@keithp.com>
9046 Date: Fri Apr 17 10:11:31 2009 -0700
9048 Add separate xmit/recv programs to radio demo
9050 commit fafe55c3405964e0defdf25b6c00236f9aaefbc5
9051 Author: Keith Packard <keithp@keithp.com>
9052 Date: Fri Apr 17 10:11:11 2009 -0700
9054 Get env var for debug method selection
9056 commit 26095fc0511ee0d5213f038986032f7c59964cf0
9057 Author: Keith Packard <keithp@keithp.com>
9058 Date: Fri Apr 17 10:10:47 2009 -0700
9060 Run-time selection between cp2103 and cc1111
9062 commit 543bedde83cbce5145668e72965e02d892187b59
9063 Author: Keith Packard <keithp@keithp.com>
9064 Date: Thu Apr 16 20:38:14 2009 -0700
9068 commit 5e2393eb6b1a6d7b180bd63d5165ee7b7ff5f9e0
9069 Author: Keith Packard <keithp@keithp.com>
9070 Date: Wed Apr 15 14:25:26 2009 -0700
9072 Move a bunch of variables from __data to __xdata
9074 commit 4d1091d9bd121f05f5fe0a9c9d2bc0da8c562b9a
9075 Author: Keith Packard <keithp@keithp.com>
9076 Date: Tue Apr 14 21:25:15 2009 -0700
9078 Slow down panic code, disable interrupts
9080 commit 545478dd02eaeff6a65d318e722b1e4fce5e01b4
9081 Author: Keith Packard <keithp@keithp.com>
9082 Date: Tue Apr 14 21:24:25 2009 -0700
9084 Keep reporting flight state while it changes
9086 commit 9605045164882b4ca3d1317ac860b02513a51f30
9087 Author: Keith Packard <keithp@keithp.com>
9088 Date: Tue Apr 14 21:23:55 2009 -0700
9090 use red LED to indicate system startup
9092 commit dc844ee7e49a3b6145b3165252a592ed070d600f
9093 Author: Keith Packard <keithp@keithp.com>
9094 Date: Tue Apr 14 21:23:13 2009 -0700
9096 Use ao_ee_flush_internal while holding mutex
9098 commit 5e45d1c89b00e74d5b2730345843f43aab516af2
9099 Author: Keith Packard <keithp@keithp.com>
9100 Date: Tue Apr 14 21:22:56 2009 -0700
9102 Leave beeping and lights to the flight code
9104 commit 902c342289c1d13a4d55b9224acb6d67578b7a60
9105 Author: Keith Packard <keithp@keithp.com>
9106 Date: Tue Apr 14 21:22:31 2009 -0700
9108 Make mutex functions reentrant
9110 commit acc4fc635edb70ec1ba2dff9f7ac0c8542c72c47
9111 Author: Keith Packard <keithp@keithp.com>
9112 Date: Tue Apr 14 19:08:01 2009 -0700
9114 Add in existing flight pieces: flight/report/log
9116 These pieces come from the old telemetrum firmware.
9118 Signed-off-by: Keith Packard <keithp@keithp.com>
9120 commit ac99982b10fd5772218660137ee21db9b90cd885
9121 Author: Keith Packard <keithp@keithp.com>
9122 Date: Tue Apr 14 14:21:56 2009 -0700
9124 Add eeprom driver and command loop
9126 This involved adding dma control and a mutex implementation.
9128 Signed-off-by: Keith Packard <keithp@keithp.com>
9130 commit fbd8f4aff5058f4d371596b04715b7cb6d38e729
9131 Author: Keith Packard <keithp@keithp.com>
9132 Date: Tue Apr 14 11:04:09 2009 -0700
9134 Switch from --model-large to --model-small
9136 This shrinks the application quite a bit, and should make it faster as well.
9138 Signed-off-by: Keith Packard <keithp@keithp.com>
9140 commit fb63262699d3a6fbf347d24efda8b01f75b7d0d3
9141 Author: Keith Packard <keithp@keithp.com>
9142 Date: Tue Apr 14 10:02:19 2009 -0700
9144 Add comments, clean up white space, etc.
9146 Various clean ups now that the basic code appears to work.
9148 Signed-off-by: Keith Packard <keithp@keithp.com>
9150 commit 7e4abf3a40c39d0ce4f466281bef9a464df85dd4
9151 Author: Keith Packard <keithp@keithp.com>
9152 Date: Mon Apr 13 21:58:07 2009 -0700
9154 Switch USB to double-buffered
9156 commit b56a44e48552bc32dbba9ff21770c370219a684a
9157 Author: Keith Packard <keithp@keithp.com>
9158 Date: Mon Apr 13 21:51:59 2009 -0700
9160 Fix USB input/output by reloading packet limits.
9162 The USB controller is reset during the connection process, which clears the
9163 packet limits set in the controller at initialization time. Reload those
9164 values when the configuration is set.
9166 Signed-off-by: Keith Packard <keithp@keithp.com>
9168 commit cdaf3fc5802acf2ddc7972a15649ab0e1b31b873
9169 Author: Keith Packard <keithp@keithp.com>
9170 Date: Mon Apr 13 20:39:46 2009 -0700
9172 USB working up through reading strings
9174 commit c5c1e3fb1c253d387be02c127253ac2a55d577b4
9175 Author: Keith Packard <keithp@keithp.com>
9176 Date: Mon Apr 13 13:51:08 2009 -0700
9180 This offers a single CDC ACM device over USB.
9182 Signed-off-by: Keith Packard <keithp@keithp.com>
9184 commit f3f25a1cec7d2a034aa544569cfd23bea1a996c5
9185 Author: Keith Packard <keithp@keithp.com>
9186 Date: Sun Apr 12 23:53:55 2009 -0700
9188 Add beep/led support.
9190 Support our P2_0 connected buzzer, and formalize LED output support.
9192 Signed-off-by: Keith Packard <keithp@keithp.com>
9194 commit e14f07bfdb8824fc7ed6df1129c66ee39ffd6d54
9195 Author: Keith Packard <keithp@keithp.com>
9196 Date: Sun Apr 12 23:17:16 2009 -0700
9200 Sample A/D at the timer tick, placing data in a ring
9203 Signed-off-by: Keith Packard <keithp@keithp.com>
9205 commit 823f4f92de0c1f8dd7a644a8e56ffe9822bee6e2
9206 Author: Keith Packard <keithp@keithp.com>
9207 Date: Sun Apr 12 22:52:47 2009 -0700
9211 Use Timer 1 to generate a 100Hz timer interrupt
9213 commit 650a77e209dbb54c8d8fd9824cee430985564973
9214 Author: Keith Packard <keithp@keithp.com>
9215 Date: Sun Apr 12 21:58:49 2009 -0700
9219 commit 870e98334018a66de8a6e4a659d2dc5dee1cbecf
9220 Author: Keith Packard <keithp@keithp.com>
9221 Date: Sun Apr 12 21:52:56 2009 -0700
9225 commit 11c526bdcbf4012e18fbfdc29ca8832870ca38f0
9226 Author: Keith Packard <keithp@keithp.com>
9227 Date: Sun Apr 12 21:47:32 2009 -0700
9229 Add load command to s51
9231 commit 55402ba3e87fd699c51079843309f1f0d1534724
9232 Author: Keith Packard <keithp@keithp.com>
9233 Date: Sun Apr 12 21:33:55 2009 -0700
9235 Make test more complicated
9237 commit 3d3f849c9af9028f667cef4afedc0798d39a9efc
9238 Author: Keith Packard <keithp@keithp.com>
9239 Date: Sun Apr 12 21:33:46 2009 -0700
9241 SP points at last pushed byte
9243 commit f72c4cbc8fd9412dd1cce0fc446e7bbd2edc2d34
9244 Author: Keith Packard <keithp@keithp.com>
9245 Date: Sun Apr 12 20:27:03 2009 -0700
9249 commit 1903a86bf2cc6b685ccc475e62eabe49a4ec5b43
9250 Author: Keith Packard <keithp@keithp.com>
9251 Date: Sun Apr 12 20:25:39 2009 -0700
9253 Initial AltOS import
9255 commit 5221dc63cf3a059a32aca2bfa7828c215be814a1
9256 Author: Keith Packard <keithp@keithp.com>
9257 Date: Sun Apr 12 12:38:58 2009 -0700
9261 commit ee110425fb814780476d1d3d8a257af126f41763
9262 Author: Keith Packard <keithp@keithp.com>
9263 Date: Mon Apr 6 17:09:23 2009 -0700
9265 Bump buffer pointer as data is written to cc-usb
9267 commit 2d9b8a83a2d9f495199033e43f519d26f27938fe
9268 Author: Keith Packard <keithp@keithp.com>
9269 Date: Mon Apr 6 11:31:49 2009 -0700
9271 Add support for a serial-connected custom debug dongle
9273 This uses the cc1111 board as a custom debug dongle with faster
9274 methods for communicating with the debug target.
9276 commit 24edd56155ed0fa02fdd8f66fdc7aa5a1021bf7d
9277 Author: Keith Packard <keithp@keithp.com>
9278 Date: Wed Apr 1 17:50:47 2009 -0700
9280 Reset cc1111 on s51 exit
9282 commit 5fcfe854d29e1862d9a6adcbef3ef5119eb52fa3
9283 Author: Keith Packard <keithp@keithp.com>
9284 Date: Wed Apr 1 00:06:45 2009 -0700
9286 Add timer-based beep test
9288 commit 91607bebdd167ac632aca4b66e22cb0cabdf0d20
9289 Author: Keith Packard <keithp@keithp.com>
9290 Date: Thu Mar 26 22:41:47 2009 -0700
9292 Add readline support to s51
9294 commit 66ee94ed10e3d79b24f45a5c63e58456d4d30343
9295 Author: Keith Packard <keithp@keithp.com>
9296 Date: Wed Mar 25 11:37:48 2009 -0700
9298 Deal with MSB-outputing DMA engine
9300 commit d3732fd405af03c3752a84c4b78da7ef5ebd3744
9301 Author: Keith Packard <keithp@keithp.com>
9302 Date: Wed Mar 25 11:14:03 2009 -0700
9304 Flip ADC bytes around
9306 commit 50cc8e97e76d9b60c622962e1c74cf422dfb2c0f
9307 Author: Keith Packard <keithp@keithp.com>
9308 Date: Wed Mar 25 11:01:30 2009 -0700
9310 Add spacing for serial adc data
9312 commit 5577ca3762bfc000b0bc3782c73a8f95996a28a6
9313 Author: Keith Packard <keithp@keithp.com>
9314 Date: Wed Mar 25 10:58:57 2009 -0700
9316 Inc only one on dest addr
9318 commit 378227d869a3e8787c532c8c4e1563b44002c4b5
9319 Author: Keith Packard <keithp@keithp.com>
9320 Date: Wed Mar 25 10:55:17 2009 -0700
9322 Dump remaining inputs
9324 commit f54a41e37d6897db2e24fbc82880076b78a0ae41
9325 Author: Keith Packard <keithp@keithp.com>
9326 Date: Wed Mar 25 10:50:36 2009 -0700
9328 Remove poll for ti demo button
9330 commit 2b93a70fdd9e47e8195855451aa19ecad5d8b068
9331 Author: Keith Packard <keithp@keithp.com>
9332 Date: Wed Mar 25 10:50:14 2009 -0700
9334 Add adc to serial conversion
9336 commit d9fd548db15232e3a8823815962b252c7a5e7cba
9337 Author: Keith Packard <keithp@keithp.com>
9338 Date: Wed Mar 25 10:04:50 2009 -0700
9340 Add ADC via DMA example
9342 commit 61faf2b773300988fe27cfde5bc045be9950a1b0
9343 Author: Keith Packard <keithp@keithp.com>
9344 Date: Wed Mar 25 09:45:14 2009 -0700
9348 commit 7b3fdf5b42c9be9bebc1ceb7a52ff0f5a2a28fcd
9349 Author: Keith Packard <keithp@keithp.com>
9350 Date: Wed Mar 25 01:05:36 2009 -0700
9354 commit 31d59b88baa2cd96dc6263d1c5877283f2cd8c36
9355 Author: Keith Packard <keithp@keithp.com>
9356 Date: Wed Mar 25 01:03:08 2009 -0700
9358 Make radio test compile again
9360 commit 9ce713fdd19bf1a51370dacba3670504356c5c11
9361 Author: Keith Packard <keithp@keithp.com>
9362 Date: Wed Mar 25 01:02:07 2009 -0700
9364 Wait for xtal to stabilize
9366 commit ffd43886dc902f3bb7407294018e3d62cac39480
9367 Author: Keith Packard <keithp@keithp.com>
9368 Date: Wed Mar 25 00:55:11 2009 -0700
9372 commit 029963cc94fbb47560118b5de73c537e2c14ed7c
9373 Author: Keith Packard <keithp@keithp.com>
9374 Date: Wed Mar 25 00:50:02 2009 -0700
9376 Eliminate array walking
9378 commit 019456a17d36f8f9f9b72cfbc980492175086d32
9379 Author: Keith Packard <keithp@keithp.com>
9380 Date: Wed Mar 25 00:41:49 2009 -0700
9382 Add a per-char delay
9384 commit cfaf187e96ba98eb8dd934409a10bc70273fe68a
9385 Author: Keith Packard <keithp@keithp.com>
9386 Date: Wed Mar 25 00:36:35 2009 -0700
9388 Use UTX1IF to wait for serial TX complete
9390 commit 006124529b243c7657a94312d2c868a82878d8bb
9391 Author: Keith Packard <keithp@keithp.com>
9392 Date: Wed Mar 25 00:29:29 2009 -0700
9394 Send more interesting text
9396 commit 5049acd3d1ae42304513f667f55a2ddffa4c685a
9397 Author: Keith Packard <keithp@keithp.com>
9398 Date: Wed Mar 25 00:24:56 2009 -0700
9400 More random serial bit frobbing
9402 commit 50bdc2407c674a4770912d3a626f36820a7f1527
9403 Author: Keith Packard <keithp@keithp.com>
9404 Date: Wed Mar 25 00:13:15 2009 -0700
9406 Flip serial TX code around a bit
9408 commit 7b7617e376afe0df1d505375b76198358330370c
9409 Author: Keith Packard <keithp@keithp.com>
9410 Date: Wed Mar 25 00:09:47 2009 -0700
9412 Try serial polarity high/high
9414 commit 18edacdb1e6e429cc29a164e22ef2a566096b9d9
9415 Author: Keith Packard <keithp@keithp.com>
9416 Date: Wed Mar 25 00:06:32 2009 -0700
9418 Make serial test simpler
9420 commit 62744c186792739c3bf5798c80ff87c69fbe2b65
9421 Author: Keith Packard <keithp@keithp.com>
9422 Date: Wed Mar 25 00:03:45 2009 -0700
9424 Flip start/stop bits around
9426 commit 9e96107d5d1a9681b07c36bb5860c748bfe10ec0
9427 Author: Keith Packard <keithp@keithp.com>
9428 Date: Tue Mar 24 23:57:12 2009 -0700
9432 commit c41ceb9a488b2209d1d3c09967d1473ce608030f
9433 Author: Keith Packard <keithp@keithp.com>
9434 Date: Tue Mar 24 23:24:01 2009 -0700
9436 Change radio to -30dBm
9438 commit c35de083ca3d4f362063b056a0fd74ffe629d168
9439 Author: Keith Packard <keithp@keithp.com>
9440 Date: Tue Mar 24 23:11:48 2009 -0700
9442 Add serial test program
9444 commit 8ecbd8734f0fb5588b2a8eb20720cfc6f43dfb47
9445 Author: Keith Packard <keithp@keithp.com>
9446 Date: Tue Mar 24 22:37:38 2009 -0700
9448 Wait for xtal to stabilize after changing to 24MHz
9450 commit e120269fc0f8e14ddf1755337b1d092173e16da2
9451 Author: Keith Packard <keithp@keithp.com>
9452 Date: Tue Mar 24 22:21:31 2009 -0700
9454 Actually return byte read from SPI
9456 commit de1ac6f99a1526fa840a52cfc10fa3edc0589bed
9457 Author: Keith Packard <keithp@keithp.com>
9458 Date: Tue Mar 24 22:12:51 2009 -0700
9460 Clear UxCSR_TX_BYTE after transmitting a byte
9462 commit 3ed3ff63e46767a256d30c5da5c52ae20089a91d
9463 Author: Keith Packard <keithp@keithp.com>
9464 Date: Tue Mar 24 20:04:58 2009 -0700
9468 commit 91b3a6ae74184692f45702587c4d678b2799ad8c
9469 Author: Keith Packard <keithp@keithp.com>
9470 Date: Tue Mar 24 19:55:04 2009 -0700
9472 actually write and compare SPI test bits
9474 commit 7de3a43887485c3c6cf52960376ccde33fb33985
9475 Author: Keith Packard <keithp@keithp.com>
9476 Date: Tue Mar 24 19:54:02 2009 -0700
9478 Add USART-based SPI test code
9480 commit ef0eef68280e9b6ca5e3bb71062e23054340e1ed
9481 Author: Keith Packard <keithp@keithp.com>
9482 Date: Tue Mar 24 17:22:36 2009 -0700
9484 Change spi test string
9486 commit 8131389ee5018c05b721146a98367150cf500fdf
9487 Author: Keith Packard <keithp@keithp.com>
9488 Date: Tue Mar 24 17:15:09 2009 -0700
9490 Oops, not merging in the bit read for SPI test
9492 commit 3429016d1359ec650993d2fb0596184e3f717871
9493 Author: Keith Packard <keithp@keithp.com>
9494 Date: Tue Mar 24 17:04:45 2009 -0700
9496 Adjust clock/data phase for spi test
9498 commit fedd18b28ea54e1dabcd2f9e8cab3ae4ee0fd070
9499 Author: Keith Packard <keithp@keithp.com>
9500 Date: Tue Mar 24 16:35:13 2009 -0700
9502 MISO needs to be an input
9504 commit f0c233f25a208a636833312b1766825815735304
9505 Author: Keith Packard <keithp@keithp.com>
9506 Date: Tue Mar 24 15:41:55 2009 -0700
9508 Add bit-banging spi eeprom test program
9510 commit 6eeee64cf16ccc9218dbdde5426f25bda5e3407f
9511 Author: Bdale Garbee <bdale@gag.com>
9512 Date: Wed Mar 18 02:58:33 2009 -0600
9514 working beep at around 4khz
9516 commit 4726317de811c20e8d6754762437b5c9cbb3a48c
9517 Author: Keith Packard <keithp@keithp.com>
9518 Date: Wed Mar 18 01:54:34 2009 -0700
9520 Add simple test program to light up the transmitter at 434.550MHz
9522 This starts a transmit sequence, but doesn't send any data so the
9523 transmitter just locks on.
9525 commit a0a27600ee2bf237e74eb83767a8d2e7c91df24f
9526 Author: Keith Packard <keithp@keithp.com>
9527 Date: Sun Mar 15 18:14:21 2009 -0700
9529 Correctly comment which bit the beep program uses
9531 commit 25b77d236c01258abfc03114c2fc9ea2d69ca6e7
9532 Author: Keith Packard <keithp@keithp.com>
9533 Date: Sun Mar 15 18:11:53 2009 -0700
9535 Add telemetrum beeper example
9537 commit 164b4e4749ad64ebbe26e84fd7b4fa1aa733dbe4
9538 Author: Keith Packard <keithp@keithp.com>
9539 Date: Sun Mar 15 18:11:20 2009 -0700
9541 sdcc gets the lib path correct based on the model
9543 commit 04a316133af93b79bfbebb91f05eec1015ec2abc
9544 Author: Keith Packard <keithp@keithp.com>
9545 Date: Sun Mar 15 18:10:43 2009 -0700
9547 Bump debug speed back up
9549 commit 9fd63972758d6d5572f7bcaadec9b1c0e974a2e8
9550 Author: Keith Packard <keithp@keithp.com>
9551 Date: Sat Mar 7 21:05:40 2009 -0800
9553 Only flip changing bits in async mode
9555 commit c8fd04e154bcfd65ae1200980bd8163caabd7fe4
9556 Author: Keith Packard <keithp@keithp.com>
9557 Date: Sat Mar 7 21:05:06 2009 -0800
9559 The debug port only works if reset is higher than clock. weird
9561 commit ade11f88754b4ab0386ebf86afc5257e59238f62
9562 Author: Keith Packard <keithp@keithp.com>
9563 Date: Sat Mar 7 21:04:38 2009 -0800
9565 Make manual bit flipping sync after every transaction
9567 commit e63b5271bb54afc36e4b9891e51e053ff6011092
9568 Author: Keith Packard <keithp@keithp.com>
9569 Date: Sat Mar 7 14:49:22 2009 -0800
9573 commit 77d754afc2d14aaa4413c13ebe3777ef385f62a9
9574 Author: Keith Packard <keithp@keithp.com>
9575 Date: Sat Mar 7 14:48:49 2009 -0800
9577 Sync after manual bit reading
9579 commit 5a338c8a7394d003355f96a8777b6fe83bb8493c
9580 Author: Keith Packard <keithp@keithp.com>
9581 Date: Sat Mar 7 14:48:35 2009 -0800
9583 Flip debug pins around to match telemetrum
9585 commit cc0495b7028f4b1189a00707d828a68534d1dea2
9586 Author: Keith Packard <keithp@keithp.com>
9587 Date: Fri Mar 6 22:52:35 2009 -0800
9589 Wait for a while when switching the RESET_N line
9591 The cc1111 manual suggests placing a 2.7kΩ resister and 1nF capacitor on the
9592 RESET_N line to filter out noise. This increases the time necessary to reset
9593 the chip to several microseconds which is longer than the interval between
9594 two USB packets. Flush the USB packet queue and sleep for a while after
9595 changing the value on the RESET_N line to make sure the chip sees the state
9598 Signed-off-by: Keith Packard <keithp@keithp.com>
9600 commit 41289e6d8f1767547a33fea349866e928e44910f
9601 Author: Bdale Garbee <bdale@gag.com>
9602 Date: Mon Mar 2 07:46:20 2009 -0700
9604 minor s51.1 formatting fixes
9606 Signed-off-by: Keith Packard <keithp@keithp.com>
9608 commit fdee231ed097a4348aee78fbd4aa92826b80de03
9609 Author: Keith Packard <keithp@keithp.com>
9610 Date: Sun Mar 1 23:12:31 2009 -0800
9614 This documents (briefly) the s51 hex debugging interface program, including
9615 some simple commands to test the operation of the system interactively.
9617 Signed-off-by: Keith Packard <keithp@keithp.com>
9619 commit f7d91bd23b8214e09deae0aafb516331e934c49b
9620 Author: Keith Packard <keithp@keithp.com>
9621 Date: Sun Mar 1 18:43:03 2009 -0800
9623 Sometimes the link breaks and the GET_PC command returns garbage
9625 commit 3cc8d11eb8d5d0b42141dd84a58d461287f59e3a
9626 Author: Keith Packard <keithp@keithp.com>
9627 Date: Sun Jan 25 08:38:48 2009 -0800
9629 Support 'set' command
9631 The 'set' command modifies target memory and registers
9633 Signed-off-by: Keith Packard <keithp@keithp.com>
9635 commit 60940b4be23962db79b8e914ec943d0636dd68ad
9636 Author: Keith Packard <keithp@keithp.com>
9637 Date: Mon Jan 5 21:45:21 2009 -0800
9639 Expose ccdbg_set_clock API
9641 This allows applications to change the debug port clock
9644 Signed-off-by: Keith Packard <keithp@keithp.com>
9646 commit eb09e61b0682eb2aeac8e1a34d58b897ba6db8e7
9647 Author: Keith Packard <keithp@keithp.com>
9648 Date: Mon Jan 5 21:44:44 2009 -0800
9650 Use custom sdcc libraries (this needs to be configured...)
9652 Signed-off-by: Keith Packard <keithp@keithp.com>
9654 commit 1ccfe0887c794397131ab1c986c25f66eea86a6c
9655 Author: Keith Packard <keithp@keithp.com>
9656 Date: Mon Jan 5 21:43:44 2009 -0800
9658 Have S51 ignore SIGINT while running under sdcdb.
9660 This prevents keyboard interrupts from accidentally stopping
9663 Signed-off-by: Keith Packard <keithp@keithp.com>
9665 commit 7c03937b36aac82b08f4ea0c6da33a994fe15ec7
9666 Author: Keith Packard <keithp@keithp.com>
9667 Date: Tue Dec 30 22:40:13 2008 -0800
9669 Add simple and timer sample programs
9671 Signed-off-by: Keith Packard <keithp@keithp.com>
9673 commit 6c2a65c743a4ffae96ed27dbc38c1bf9242ed1df
9674 Author: Keith Packard <keithp@keithp.com>
9675 Date: Tue Dec 30 22:35:53 2008 -0800
9677 Save/restore registers to host during memory operations. Cache ROM data.
9679 Because the debug port uses instructions for most operations, the debug code
9680 will clobber registers used by the running program. Save and restore these
9681 to avoid corrupting application data.
9683 If the ROM file is known, use that to return data instead of fetching it
9684 from the target to improve performance.
9686 Signed-off-by: Keith Packard <keithp@keithp.com>
9688 commit ea366058aa467a8a7caf17e7014758f3741ea7f7
9689 Author: Keith Packard <keithp@keithp.com>
9690 Date: Mon Dec 29 12:35:11 2008 -0800
9692 Fix flashing less than a full page of data. Verify page at a time.
9694 The 8051 flashing code requires special help with counts with non-zero low
9695 byte. Also, instead of verifying the entire flash contents at the end,
9696 verify each page as it goes.
9698 Signed-off-by: Keith Packard <keithp@keithp.com>
9700 commit e0697186a2f9b6139636ff5d5c162879c85caf9c
9701 Author: Keith Packard <keithp@keithp.com>
9702 Date: Sun Dec 28 00:11:13 2008 -0800
9704 Use SFR access funcs. Support 'dump' command. Add -m (monitor) flag.
9706 Not all SFRs are visible in the unified address space, so the SFR-specific
9707 accessors are required.
9709 The dump command is the same as the various 'd*'
9710 commands, but also supports dumping program memory.
9712 The new -m (monitor) flag watches the command stream between s51 and sdcdb.
9714 Signed-off-by: Keith Packard <keithp@keithp.com>
9716 commit 23aca1fcbc169184e32d4ec19f28dd4fd4cfda36
9717 Author: Keith Packard <keithp@keithp.com>
9718 Date: Sun Dec 28 00:09:30 2008 -0800
9720 Save/restore regs when reading/writing memory. Add SFR access.
9722 The DPL and ACC registers are used by the memory access code,
9723 so they need to be saved and restored. Stuff them up high in ram for now;
9724 this should probably be fixed to pull them back to the host instead.
9726 Special SFR access is required as not all SFRs are visible in the unified
9729 Signed-off-by: Keith Packard <keithp@keithp.com>
9731 commit 1405838160b69e2cda456e21502a1d03b3aa7548
9732 Author: Keith Packard <keithp@keithp.com>
9733 Date: Sat Dec 27 11:25:58 2008 -0800
9735 s51: get start address from ihx file. re-enable breakpoints after reset.
9737 Use the start of the ihx file when asked to run from 0x0, this lets
9738 sdcdb run programs from ram.
9740 The reset command clears all hw breakpoints, so reset them afterwards.
9742 Signed-off-by: Keith Packard <keithp@keithp.com>
9744 commit 1264c3676e95427bba5d01e05c303d036a7f9eca
9745 Author: Keith Packard <keithp@keithp.com>
9746 Date: Fri Dec 26 23:05:04 2008 -0800
9748 Switch to libusb-1.0 and use async interface.
9750 The async libusb interface offers substantial performance benefits by not
9751 making each command wait for the reply. This makes talking over this
9752 interface almost reasonable.
9754 Signed-off-by: Keith Packard <keithp@keithp.com>
9756 commit d2d9cfd74fd66836c913c02276e09136d83b35dc
9757 Author: Keith Packard <keithp@keithp.com>
9758 Date: Fri Dec 26 17:58:48 2008 -0800
9760 s51: add breakpoints and the ability to block awaiting a breakpoint.
9762 Signed-off-by: Keith Packard <keithp@keithp.com>
9764 commit 4c4093c3fdd309123fdd068c0e1ff4947104492d
9765 Author: Keith Packard <keithp@keithp.com>
9766 Date: Mon Dec 22 19:11:56 2008 -0800
9768 Add more commands to s51 assembly-language debugger
9770 Signed-off-by: Keith Packard <keithp@keithp.com>
9772 commit 55eba4fa08b022197106245d36a70f575a070b0a
9773 Author: Keith Packard <keithp@keithp.com>
9774 Date: Mon Dec 22 19:10:27 2008 -0800
9776 Make read_memory debug output use ccdbg_debug.
9778 This makes it default to not being presented, which makes s51 much happier
9780 Signed-off-by: Keith Packard <keithp@keithp.com>
9782 commit e75918f3667a5c8ad294bec4acef6fe81682edf6
9783 Author: Keith Packard <keithp@keithp.com>
9784 Date: Sun Dec 21 23:33:35 2008 -0800
9786 Add preliminary version of s51, a UI clone of the 8051 emulator.
9788 sdcdb provides source-level debugging using the 8051 emulator, s51. By
9789 emulating that emulator a the UI level, we should be able to get source
9790 debugging right on our target platform.
9792 This is just the preliminary structure for the program with most commands
9793 not yet implemented.
9795 commit f7d49868aeae80d515b12a7e339628f1296754a6
9796 Author: Keith Packard <keithp@keithp.com>
9797 Date: Sat Dec 20 23:30:06 2008 -0800
9799 Cleanup work; separating out the cp interface to be more abstract.
9801 Signed-off-by: Keith Packard <keithp@keithp.com>
9803 commit 30f23f23a6db3d12fdc9c088cf6ab47c5e5077fb
9804 Author: Keith Packard <keithp@keithp.com>
9805 Date: Fri Dec 19 21:13:04 2008 -0800
9807 Clean up autotools stuff.
9809 Signed-off-by: Keith Packard <keithp@keithp.com>
9811 commit 9025eb792861930e6af918d2727c4f5d97a69936
9812 Author: Keith Packard <keithp@keithp.com>
9813 Date: Fri Dec 19 21:11:45 2008 -0800
9817 Signed-off-by: Keith Packard <keithp@keithp.com>
9819 commit ab909db28307cfbf7ee8d692506bb79d7ffd627a
9820 Author: Keith Packard <keithp@keithp.com>
9821 Date: Fri Dec 19 19:08:13 2008 -0800
9825 commit cc8db276bc4f2fd7eb00168a5c0689a8457a5c6f
9826 Author: Keith Packard <keithp@keithp.com>
9827 Date: Fri Dec 19 19:07:37 2008 -0800
9829 Move blink example to subdir
9831 Signed-off-by: Keith Packard <keithp@keithp.com>
9833 commit 82e2d7ebed6682062dc400478c736bd6c91195c9
9834 Author: Keith Packard <keithp@keithp.com>
9835 Date: Fri Dec 19 19:04:26 2008 -0800
9837 Clean up makefiles, move ihx files to .ihx
9839 commit 52fb5f795adfd7f62e5b6dbe65877d14361cfdae
9840 Author: Keith Packard <keithp@keithp.com>
9841 Date: Fri Dec 19 14:39:57 2008 -0800
9845 commit 4ecfc33f16aa36b315519e6f279da65374b67aba
9846 Author: Keith Packard <keithp@keithp.com>
9847 Date: Fri Dec 19 14:37:53 2008 -0800
9849 Add cc1111 isr stub example
9851 commit d32e6658c3e489b62ba3cf6d22e3ab177b9b8a3a
9852 Author: Keith Packard <keithp@keithp.com>
9853 Date: Fri Dec 19 14:37:29 2008 -0800
9855 Add blink-tiny flash and ram versions
9857 commit b4d1127ef007843c643b778b3b2f6b915b1d5d9a
9858 Author: Keith Packard <keithp@keithp.com>
9859 Date: Fri Dec 19 14:19:29 2008 -0800
9861 Flash multiple pages. Eliminate off-by-one error in hex_image length.
9863 Signed-off-by: Keith Packard <keithp@keithp.com>
9865 commit 55995515b9d4fc1e193039eab697c5d03db417c2
9866 Author: Keith Packard <keithp@keithp.com>
9867 Date: Fri Dec 19 11:04:16 2008 -0800
9869 Add flash writing code.
9871 Signed-off-by: Keith Packard <keithp@keithp.com>
9873 commit 0bc52385b8f86f9ca1c450ad106e6d8afe3bc153
9874 Author: Keith Packard <keithp@keithp.com>
9875 Date: Thu Dec 18 12:37:32 2008 -0800
9879 Signed-off-by: Keith Packard <keithp@keithp.com>
9881 commit 3779cc8b32cac3640f42bd0400d4199ddae965a1
9882 Author: Keith Packard <keithp@keithp.com>
9883 Date: Thu Dec 18 12:17:41 2008 -0800
9887 Signed-off-by: Keith Packard <keithp@keithp.com>
9889 commit dc03adc179669d41e3551d74b3c5a60db41ff217
9890 Author: Keith Packard <keithp@keithp.com>
9891 Date: Thu Dec 18 12:07:06 2008 -0800
9893 Add ability to load Intel HEX files. Add sample sdcc LED blinker.
9895 Signed-off-by: Keith Packard <keithp@keithp.com>
9897 commit 807e2adacb025af77bb53c03209e9c8e0d7a5f95
9898 Author: Keith Packard <keithp@keithp.com>
9899 Date: Thu Dec 18 00:18:50 2008 -0800
9901 Add ability to read/write arbitrary memory. Write LED blinker program.
9903 Signed-off-by: Keith Packard <keithp@keithp.com>
9905 commit 8c879bf51c14a5928135d59211facd72f6a32808
9906 Author: Keith Packard <keithp@keithp.com>
9907 Date: Wed Dec 17 23:15:47 2008 -0800
9909 Move manual bit-banging debug code to separate file
9911 Signed-off-by: Keith Packard <keithp@keithp.com>
9913 commit aec3bbce84a5ceb92060a4b3889379f2af2404ac
9914 Author: Keith Packard <keithp@keithp.com>
9915 Date: Wed Dec 17 23:15:19 2008 -0800
9917 reduce clock to 50us
9919 Signed-off-by: Keith Packard <keithp@keithp.com>
9921 commit fa168f963f8b00144d12aa2770e9c0917cfae123
9922 Author: Keith Packard <keithp@keithp.com>
9923 Date: Wed Dec 17 23:12:59 2008 -0800
9925 Fill out ccdbg-command to support all debug commands.
9927 Signed-off-by: Keith Packard <keithp@keithp.com>
9929 commit 5df84df7cd6a31527dcfd11030f00ef9d8abf170
9930 Author: Keith Packard <keithp@keithp.com>
9931 Date: Wed Dec 17 22:24:59 2008 -0800
9933 Clean up bitbanging layer. Add debug printfs.
9935 Signed-off-by: Keith Packard <keithp@keithp.com>
9937 commit 584e28bac8af38de433767e017977ed1adddeb36
9938 Author: Keith Packard <keithp@keithp.com>
9939 Date: Wed Dec 17 12:32:15 2008 -0800
9941 Clean up sample debug files
9943 Signed-off-by: Keith Packard <keithp@keithp.com>
9945 commit e64b4dbf15e9ee1cb0de002985de7575e83d46e9
9946 Author: Keith Packard <keithp@keithp.com>
9947 Date: Mon Dec 8 17:25:28 2008 -0800
9949 Add support for input-only lines (-)
9951 commit 4f38974a9941cddaba27c17c5a46f923db386c94
9952 Author: Keith Packard <keithp@keithp.com>
9953 Date: Sat Dec 6 16:32:27 2008 -0800
9957 commit 3709ec3205cfb152b6568f3ea505c67fe7504c2a
9958 Author: Keith Packard <keithp@keithp.com>
9959 Date: Sat Dec 6 16:32:12 2008 -0800
9961 Add libusb support and lots more examples
9963 commit 39801e6e9fb9388072ee414a447f74095a6ac960
9964 Author: Keith Packard <keithp@keithp.com>
9965 Date: Fri Nov 28 22:57:07 2008 -0800
9969 commit 01cb2799875e086ee6096627c058ee235bbc33d5
9970 Author: Keith Packard <keithp@keithp.com>
9971 Date: Thu Nov 27 17:07:15 2008 -0800
9973 Add prototypes, add stub mainline, add .gitignore
9975 commit 0ffe4ef870b0e564789a1990aeab5b6651868e5b
9976 Author: Keith Packard <keithp@keithp.com>
9977 Date: Thu Nov 27 12:33:40 2008 -0800
9979 cc1111 debug port access through cp2103 serial chip