Switch pyro series resistors to 1k

This limits the current through the comparator to 3.3mA when it fires
to make sure the gate voltage on the FET is low enough.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/attribs b/attribs
index d7af178679184d8c3bf877499266e2bdbee31cb5..5703a576232d1b31c34354ce07478768bdf15af9 100644 (file)
--- a/attribs
+++ b/attribs
@@ -3,6 +3,7 @@ value
 footprint
 loadstatus
 provided
+mfg
 mfg_part_number
 vendor
 vendor_part_number

diff --git a/telemini.pcb b/telemini.pcb
index 1f194ecd25a56463515a30954afd5a0966d373d8..eb9fff42da2e5c2f273b95517f671fe79d84c187 100644 (file)
--- a/telemini.pcb
+++ b/telemini.pcb
@@ -1106,14 +1106,14 @@ Element["" "0402" "L171" "56nH" 32.7086mm 392.00mil -0.5776mm -12.00mil 0 40 ""]
 
        )
 
-Element["" "0402" "R10" "100" 575.26mil 194.00mil -17.26mil -12.00mil 0 40 ""]
+Element["" "0402" "R10" "1k" 575.26mil 194.00mil -17.26mil -12.00mil 0 40 ""]
 (
        Pad[15.74mil -3.93mil 15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "1" "1" "square"]
        Pad[-15.74mil -3.93mil -15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "2" "2" "square"]
 
        )
 
-Element["" "0402" "R6" "100" 575.26mil 232.00mil -11.26mil -12.00mil 0 40 ""]
+Element["" "0402" "R6" "1k" 575.26mil 232.00mil -11.26mil -12.00mil 0 40 ""]
 (
        Pad[15.74mil -3.93mil 15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "1" "1" "square"]
        Pad[-15.74mil -3.93mil -15.74mil 3.93mil 19.68mil 20.00mil 25.68mil "2" "2" "square"]

diff --git a/telemini.sch b/telemini.sch
index ba8f1e2ffb9a2f4e04581ea46ba515ae78fc992b..390444453c074e4b9feddafda36c518e85592afb 100644 (file)
--- a/telemini.sch
+++ b/telemini.sch
@@ -247,7 +247,7 @@ footprint=0402
 T 66100 58900 5 10 1 1 180 0 1
 refdes=R6
 T 66500 58900 5 10 1 1 180 0 1
-value=100
+value=1k
 }
 C 65700 54800 1 0 0 resistor.sym
 {
@@ -258,7 +258,7 @@ footprint=0402
 T 66100 55200 5 10 1 1 180 0 1
 refdes=R10
 T 66500 55200 5 10 1 1 180 0 1
-value=100
+value=1k
 }
 N 66600 58600 67200 58600 4
 N 66600 54900 67200 54900 4