git.gag.com Git - hw/telegps/search

2013-03-21	Keith Packard	Eliminate top ground flood under GPS chip Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-01-27	Keith Packard	Clean up ground flood on top Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-01-15	Keith Packard	Fix clean target to remove more stuff Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-01-15	Keith Packard	Use shared altusmetrum scheme files Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-01-08	Keith Packard	Add DK numbers for SMA and a couple of caps Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Un-short gnd and gps_gnd Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Nice big serial number patch Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Move top ground plane away from USB cut-out Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Ick. Little top ground plane glitch Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	More top ground plane changes Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Shove swdio trace right Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Re-flood the top Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Move U7 label to someplace visible Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-31	Keith Packard	Move power switch between SD and debug connectors Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-30	Keith Packard	Flip debug connector around Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-30	Keith Packard	Add serial port for optional telemetry input Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Fix filenames to make oshpark happy Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Move U7 label into a reasonable place Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Export gerber files with 'eagle' names. Add copyright... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Add a couple of missing packages to git Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Update schematic and PCB to include STM-48 QFP pad Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-28	Keith Packard	Fix STM footprint to include TI-style pad with vias Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-27	Keith Packard	Fix QFN-16 footprint to meet DRC rules (13mil drill... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-27	Keith Packard	Make freedfm happy about debug alignment hole annular... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-23	Keith Packard	Move another capacitor further from the battery connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-23	Keith Packard	Switch to the new SMA footprint Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-22	Keith Packard	Finish re-routing after moving TH components to front Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-22	Keith Packard	Move TH components to front side Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Make the ground flood on the backside complete Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Fix clearance around GPS mounting holes Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Create a large ground plane behind the RF section Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Mark do-not-load parts as loadstatus=noload Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Find DK number for 10 ohm resistor Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Add more part values Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Correct STM32L part number Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Update DK part numbers Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Add a handful of bypass caps Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Fix board size to 1 inch high Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Shuffle ink around Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Route the battery charger. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Finish routing RF section Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-21	Keith Packard	Add a power switch connector (two pin holes). Route... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Move vias and traces from underneath GPS Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route most of the CPU Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Switch GPS to usart2 on pins 11 and 12 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route PA controls towards PA Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Route cc115L Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Stitch GPS ground plane. Rotate microSD. Start PA route. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Update ground plane and VCC. Place microUSB Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Update CC115L component values Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Add value and footprints for PA section Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-20	Keith Packard	Add RF components. Hook up microSD card. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	geda doesn't like 'passive' pins. Use 'pas' instead Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Add two more signal layers and planned outline Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Initial schematic and pcb floor planning Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-12-19	Keith Packard	Import packages and symbols to be used for TeleGPS Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

GPS telemetry board

RSS Atom