Add a couple of missing packages to git

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/packages/0604.fp b/packages/0604.fp
new file mode 100644 (file)
index 0000000..2f0f131
--- /dev/null
+++ b/packages/0604.fp
@@ -0,0 +1,27 @@
+       # grab the input values and convert to 1/100 mil
+       # how much to grow the pads by for soldermask [1/100 mil]
+       # clearance from planes [1/100 mil]
+       # silk screen width  [1/100 mil]
+       # courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0604" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+       Pad[-2559 -542
+               -2559 542
+               2952 2000 3552 "1" "1" "square"]
+           Pad[2559 -542
+               2559 542
+               2952 2000 3552 "2" "2" "square"]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#      ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#      ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#      ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#      ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)

diff --git a/packages/100mil2pin.fp b/packages/100mil2pin.fp
new file mode 100644 (file)
index 0000000..6e8c599
--- /dev/null
+++ b/packages/100mil2pin.fp
@@ -0,0 +1,10 @@
+
+Element(0x00000000 "Header_2pin" "J0" "" 0 0 125 -30 0 100 0x00000000)
+(
+       Pin(0 0 70 15 85 38 "1" "1" 0x04000101)
+       Pin(100 0 70 15 85 38 "2" "2" 0x04000001)
+       ElementLine (150 -50 -50 -50 15)
+       ElementLine (-50 -50 -50 50 15)
+       ElementLine (-50 50 150 50 15)
+       ElementLine (150 50 150 -50 15)
+       )