Make freedfm happy about debug alignment hole annular ring size

Somehow the metal around the debug connector alignment hole needs have
slightly larger metal size

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/telegps.pcb b/telegps.pcb
index 41cc7592d48aaf421ddc7d8a6c3002d02fe7f4c3..0c39ba64abe7be885750aafd11cbc0e49c33dbdd 100644 (file)
--- a/telegps.pcb
+++ b/telegps.pcb
@@ -10,8 +10,8 @@ Cursor[295.00mil 738.00mil 0.000000]
 PolyArea[200000000.000000]
 Thermal[0.500000]
 DRC[5.00mil 10.00mil 5.00mil 5.00mil 15.00mil 6.50mil]
-Flags("showdrc,nameonpcb")
-Groups("1,c:3:2:4,s:5")
+Flags("showdrc,nameonpcb,clearnew,snappin")
+Groups("1,c:2:3:4,s:5")
 Styles["Signal,10.00mil,30.00mil,15.00mil,10.00mil:Power,25.00mil,60.00mil,35.00mil,10.00mil:Fat,40.00mil,240.00mil,236.00mil,10.00mil:Skinny,6.00mil,24.02mil,11.81mil,6.00mil"]
 
 Symbol[' ' 18.00mil]
@@ -1683,7 +1683,7 @@ Element["" "0-215079-4" "J20" "Debug" 588.00mil 85.00mil 0.0000 0.0000 0 100 ""]
        Pin[50.00mil 0.0000 62.99mil 12.00mil 72.99mil 31.50mil "pin2" "2" "edge2"]
        Pin[100.00mil 100.00mil 62.99mil 12.00mil 72.99mil 31.50mil "pin3" "3" "edge2"]
        Pin[150.00mil 0.0000 62.99mil 12.00mil 72.99mil 31.50mil "pin4" "4" "edge2"]
-       Pin[-55.11mil 29.13mil 73.06mil 14.00mil 79.06mil 59.06mil "mnt" "0" "edge2"]
+       Pin[-55.11mil 29.13mil 73.30mil 14.00mil 79.30mil 59.06mil "mnt" "0" "edge2"]
        ElementLine [-94.28mil -50.38mil -94.28mil 150.39mil 6.00mil]
        ElementLine [-94.28mil 150.39mil 244.29mil 150.39mil 6.00mil]
        ElementLine [244.29mil 150.39mil 244.29mil -50.38mil 6.00mil]