| 2013-07-11 |
Bdale Garbee | update pcb to reflect removal of flash part from design
|
commit | commitdiff | tree |
| 2013-07-11 |
Bdale Garbee | lose the flash part entirely, since we don't load it
|
commit | commitdiff | tree |
| 2013-07-11 |
Bdale Garbee | update version to 1.1
|
commit | commitdiff | tree |
| 2013-07-11 |
Bdale Garbee | route complete, no drc errors, kind of ugly around...
|
commit | commitdiff | tree |
| 2013-07-11 |
Bdale Garbee | rotate debug and companion connectors for proper cable...
|
commit | commitdiff | tree |
| 2013-03-01 |
Bdale Garbee | fix cut'n'paste error in R5 part number caught by AC...
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | move switch inboard 75 mils, clean up a few resulting...
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | lose the beeper
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | make FreeDFM happy by expanding guide pin annular ring...
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | no locking ears on companion connector, Mouser has...
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | more parts substitutions after checking Digi-Key stock...
|
commit | commitdiff | tree |
| 2013-02-27 |
Bdale Garbee | update parts selections to reflect current stock and...
|
commit | commitdiff | tree |
| 2013-02-25 |
Bdale Garbee | change version from 0.3 to 1.0, update copyright year...
|
commit | commitdiff | tree |
| 2013-02-07 |
Bdale Garbee | conn-6.sys no longer relevant
|
commit | commitdiff | tree |
| 2013-02-07 |
Bdale Garbee | move to use of shared scheme directory
|
commit | commitdiff | tree |
| 2013-02-07 |
Bdale Garbee | mark beeper and flash memory as noload for production...
|
commit | commitdiff | tree |
| 2012-12-19 |
Bdale Garbee | update loadstatus attributes for LDO bypass cap and...
|
commit | commitdiff | tree |
| 2012-12-11 |
Bdale Garbee | move to local copy of partslistgag script
|
commit | commitdiff | tree |
| 2012-10-30 |
Bdale Garbee | more make goodness
|
commit | commitdiff | tree |
| 2012-09-29 |
Bdale Garbee | move to a slight variation on my new SMA edge connector...
|
commit | commitdiff | tree |
| 2012-09-29 |
Bdale Garbee | change to W25Q64 8-megabyte flash part
|
commit | commitdiff | tree |
| 2012-03-22 |
Bdale Garbee | shove the power switch in a few more mils, minor tweaks
|
commit | commitdiff | tree |
| 2012-03-22 |
Bdale Garbee | move to 3.00 volt version of the reset controller
|
commit | commitdiff | tree |
| 2012-03-11 |
Bdale Garbee | more symbols
|
commit | commitdiff | tree |
| 2012-03-11 |
Bdale Garbee | fix schematic version
|
commit | commitdiff | tree |
| 2012-03-11 |
Bdale Garbee | let pcb rewrite the file after hacking the plane extents...
|
commit | commitdiff | tree |
| 2012-03-11 |
Bdale Garbee | major rework .. better battery charger, lots of copper...
|
commit | commitdiff | tree |
| 2011-10-12 |
Bdale Garbee | lose the disconnected cs1 notation on the companion...
|
commit | commitdiff | tree |
| 2011-10-12 |
Bdale Garbee | back vs bottom
|
commit | commitdiff | tree |
| 2011-09-13 |
Bdale Garbee | add symbol for switch
|
commit | commitdiff | tree |
| 2011-09-13 |
Bdale Garbee | add Altus Metrum graphic to silk
|
commit | commitdiff | tree |
| 2011-09-12 |
Bdale Garbee | widen the SMA notch so that we more more flexibility...
|
commit | commitdiff | tree |
| 2011-09-12 |
Bdale Garbee | turn solder paste off on SMA footprint since it's added...
|
commit | commitdiff | tree |
| 2011-09-12 |
Bdale Garbee | fix errant boundary line
|
commit | commitdiff | tree |
| 2011-07-02 |
Bdale Garbee | another ground plane improvement
|
commit | commitdiff | tree |
| 2011-07-02 |
Bdale Garbee | much cleaning up of copper, no more traces breaking...
|
commit | commitdiff | tree |
| 2011-07-02 |
Bdale Garbee | route complete, no drc errors
|
commit | commitdiff | tree |
| 2011-07-02 |
Bdale Garbee | we don't need the pull-up resistors on the serial lines
|
commit | commitdiff | tree |
| 2011-07-01 |
Bdale Garbee | snapshot work to date .. not quite fully routed, not...
|
commit | commitdiff | tree |
| 2011-06-11 |
Bdale Garbee | shove parts around to get the switch set back suitably...
|
commit | commitdiff | tree |
| 2011-06-10 |
Bdale Garbee | strip silkscreen from the USB micro B connector, and...
|
commit | commitdiff | tree |
| 2011-06-08 |
Bdale Garbee | notch the board edge to account for SMA bulkhead thickness
|
commit | commitdiff | tree |
| 2011-06-07 |
Bdale Garbee | initial work on a rotated placement .. lots still to do
|
commit | commitdiff | tree |
| 2011-05-11 |
Bdale Garbee | fix the led net name to match the blue led color
|
commit | commitdiff | tree |
| 2011-04-26 |
Bdale Garbee | tweak board dimensions down to match outline
|
commit | commitdiff | tree |
| 2011-04-22 |
Bdale Garbee | meet minimum silk line dimension on beeper circle
|
commit | commitdiff | tree |
| 2011-04-22 |
Bdale Garbee | fix soldermask clearance on sma footprint
|
commit | commitdiff | tree |
| 2011-04-22 |
Bdale Garbee | meet min annular ring dimension spec on mounting holes...
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | fix targets so make zip works
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | connect a spare cc1111 pin to the open pin on the companion...
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | add TP2 attached to v_usb so we can experiment with...
|
commit | commitdiff | tree |
| 2011-04-21 |
Bdale Garbee | cts and rts need to be cross-connected between the...
|
commit | commitdiff | tree |
| 2011-04-19 |
Bdale Garbee | mark the serial pullups as noload, keithp says they...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | move bt_link to correct pin as per keithp feedback
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | improvements in ground plane continuity, better spacing...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | fix beeper interference with sma
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | resolve switch / sma interference issue by moving switch...
|
commit | commitdiff | tree |
| 2011-04-18 |
Bdale Garbee | route complete, drc clean, added the usual silkscreen...
|
commit | commitdiff | tree |
| 2011-04-16 |
Bdale Garbee | pull ground plane back away from BT antenna, work more...
|
commit | commitdiff | tree |
| 2011-04-14 |
Bdale Garbee | adjust placement to account for pcb dimension reduction
|
commit | commitdiff | tree |
| 2011-04-14 |
Bdale Garbee | shave 50 mils off SMA end of PCB to allow for SMA flange...
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | working on placement
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | connect both VDD pins on BT module, add a second bypass...
|
commit | commitdiff | tree |
| 2011-04-12 |
Bdale Garbee | add beeper
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | pcb syncronized with schematic, all parts on board...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | move the "ground plane" to the "top" of the board since...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | fix hole size in schematic to match 1551K mounting...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | lock the outline, the bottom poly and boundary vestigal...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | expand bottom poly to full board size, then clone outline...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | holes moved to the right places for maximum size 1551K...
|
commit | commitdiff | tree |
| 2011-04-10 |
Bdale Garbee | outline now matches Hammond max PCB size for 1551K box
|
commit | commitdiff | tree |
| 2011-04-09 |
Bdale Garbee | Outline and hole positions right for board that is...
|
commit | commitdiff | tree |
| 2011-04-08 |
Bdale Garbee | update to use freshly generated Rayson module footprint
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | keithp found this doc
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | loss the vdd_usb connection on the BT chip
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | hook up vdd_usb on the bt chip, add a bypass cap
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | add bt_link net to monitor link status, fix LED colors...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | hook up pin on BT widget that would allow us to reset...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | replace BTM182 datasheet with fresher copy from the...
|
commit | commitdiff | tree |
| 2011-04-05 |
Bdale Garbee | symbols needed for schematic
|
commit | commitdiff | tree |
| 2011-04-03 |
Bdale Garbee | first cut at schematic more or less complete
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | a few more component changes, initial (worthless) pcb...
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | move to micro USB, add my favorite push button power...
|
commit | commitdiff | tree |
| 2011-03-31 |
Bdale Garbee | add datasheets to git repo, even though most of them...
|
commit | commitdiff | tree |
| 2011-03-30 |
Bdale Garbee | initial cut at stripping schematic down .. forget pcb...
|
commit | commitdiff | tree |
| 2011-01-26 |
Bdale Garbee | initialize project with a copy of telemetrum v1.1
|
commit | commitdiff | tree |
|
projects / hw / telebt / search