git.gag.com Git - hw/easymini/search

2013-09-19	Keith Packard	Change LDO to 3.3V. Fix xtal loading caps. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-09-09	Keith Packard	Change to v1.0. Add silk block for serial. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-06-24	Keith Packard	Connect USB pull-up to GPIO PI0_20 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-06-21	Keith Packard	Replace the regulator with a 3.0V LD2980. Reduce igniter... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-05-20	Keith Packard	Move pyro firing pins away from the I2C lines Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-05-06	Keith Packard	Rotate ballast cap around so GND faces the mounting... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-04-30	Keith Packard	Add DK part numbers for remaining resistors Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-04-22	Keith Packard	Slide 'EasyMini' label over a bit Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-23	Keith Packard	Add (optional) LiPo battery connector. Unrouted. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-22	Keith Packard	Update PCB to reflect the LPC11U14 part number change Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-22	Keith Packard	Switch LPC11U4 from 7x7mm package to 5x5mm package Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Shuffle refdes around on the PCB Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Fix C8 VIA thermal. Shuffle LDO N a bit Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-20	Keith Packard	Switch crystal to 12MHz ABM8G Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Clean up mask violations in LPC11U14 footprint. Hide... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Add vendor part numbers to everything Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-18	Keith Packard	Swap screw terminals around to place main/apogee aft Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Fixup ground plane Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add debug connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add text to back of board Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Add serial and debug connectors Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Re-route power to the MS5607 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Route complete Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2013-03-17	Keith Packard	Initial EasyMetrum schematic and board Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

dual deployment flight computer

RSS Atom