int xtensa_examine(struct target *target)
{
struct xtensa *xtensa = target_to_xtensa(target);
- unsigned int cmd = PWRCTL_DEBUGWAKEUP | PWRCTL_MEMWAKEUP | PWRCTL_COREWAKEUP;
+ unsigned int cmd = PWRCTL_DEBUGWAKEUP(xtensa) | PWRCTL_MEMWAKEUP(xtensa) | PWRCTL_COREWAKEUP(xtensa);
LOG_DEBUG("coreid = %d", target->coreid);
}
xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd);
- xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd | PWRCTL_JTAGDEBUGUSE);
+ xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd | PWRCTL_JTAGDEBUGUSE(xtensa));
xtensa_dm_queue_enable(&xtensa->dbg_mod);
xtensa_dm_queue_tdi_idle(&xtensa->dbg_mod);
int res = xtensa_dm_queue_execute(&xtensa->dbg_mod);
int xtensa_wakeup(struct target *target)
{
struct xtensa *xtensa = target_to_xtensa(target);
- unsigned int cmd = PWRCTL_DEBUGWAKEUP | PWRCTL_MEMWAKEUP | PWRCTL_COREWAKEUP;
+ unsigned int cmd = PWRCTL_DEBUGWAKEUP(xtensa) | PWRCTL_MEMWAKEUP(xtensa) | PWRCTL_COREWAKEUP(xtensa);
if (xtensa->reset_asserted)
- cmd |= PWRCTL_CORERESET;
+ cmd |= PWRCTL_CORERESET(xtensa);
xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd);
/* TODO: can we join this with the write above? */
- xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd | PWRCTL_JTAGDEBUGUSE);
+ xtensa_queue_pwr_reg_write(xtensa, XDMREG_PWRCTL, cmd | PWRCTL_JTAGDEBUGUSE(xtensa));
xtensa_dm_queue_tdi_idle(&xtensa->dbg_mod);
return xtensa_dm_queue_execute(&xtensa->dbg_mod);
}
target->state = TARGET_RESET;
xtensa_queue_pwr_reg_write(xtensa,
XDMREG_PWRCTL,
- PWRCTL_JTAGDEBUGUSE | PWRCTL_DEBUGWAKEUP | PWRCTL_MEMWAKEUP |
- PWRCTL_COREWAKEUP | PWRCTL_CORERESET);
+ PWRCTL_JTAGDEBUGUSE(xtensa) | PWRCTL_DEBUGWAKEUP(xtensa) | PWRCTL_MEMWAKEUP(xtensa) |
+ PWRCTL_COREWAKEUP(xtensa) | PWRCTL_CORERESET(xtensa));
xtensa_dm_queue_tdi_idle(&xtensa->dbg_mod);
int res = xtensa_dm_queue_execute(&xtensa->dbg_mod);
if (res != ERROR_OK)
OCDDCR_ENABLEOCD | OCDDCR_DEBUGINTERRUPT);
xtensa_queue_pwr_reg_write(xtensa,
XDMREG_PWRCTL,
- PWRCTL_JTAGDEBUGUSE | PWRCTL_DEBUGWAKEUP | PWRCTL_MEMWAKEUP |
- PWRCTL_COREWAKEUP);
+ PWRCTL_JTAGDEBUGUSE(xtensa) | PWRCTL_DEBUGWAKEUP(xtensa) | PWRCTL_MEMWAKEUP(xtensa) |
+ PWRCTL_COREWAKEUP(xtensa));
xtensa_dm_queue_tdi_idle(&xtensa->dbg_mod);
int res = xtensa_dm_queue_execute(&xtensa->dbg_mod);
if (res != ERROR_OK)
int xtensa_poll(struct target *target)
{
struct xtensa *xtensa = target_to_xtensa(target);
+ if (xtensa_dm_poll(&xtensa->dbg_mod) != ERROR_OK) {
+ target->state = TARGET_UNKNOWN;
+ return ERROR_TARGET_NOT_EXAMINED;
+ }
- int res = xtensa_dm_power_status_read(&xtensa->dbg_mod, PWRSTAT_DEBUGWASRESET |
- PWRSTAT_COREWASRESET);
+ int res = xtensa_dm_power_status_read(&xtensa->dbg_mod, PWRSTAT_DEBUGWASRESET(xtensa) |
+ PWRSTAT_COREWASRESET(xtensa));
if (xtensa->dbg_mod.power_status.stat != xtensa->dbg_mod.power_status.stath)
LOG_TARGET_DEBUG(target, "PWRSTAT: read 0x%08" PRIx32 ", clear 0x%08lx, reread 0x%08" PRIx32,
xtensa->dbg_mod.power_status.stat,
- PWRSTAT_DEBUGWASRESET | PWRSTAT_COREWASRESET,
+ PWRSTAT_DEBUGWASRESET(xtensa) | PWRSTAT_COREWASRESET(xtensa),
xtensa->dbg_mod.power_status.stath);
if (res != ERROR_OK)
return res;
"DSR has changed: was 0x%08" PRIx32 " now 0x%08" PRIx32,
prev_dsr,
xtensa->dbg_mod.core_status.dsr);
- if (xtensa->dbg_mod.power_status.stath & PWRSTAT_COREWASRESET) {
+ if (xtensa->dbg_mod.power_status.stath & PWRSTAT_COREWASRESET(xtensa)) {
/* if RESET state is persitent */
target->state = TARGET_RESET;
} else if (!xtensa_dm_is_powered(&xtensa->dbg_mod)) {
LOG_ERROR("Failed to clear OCDDCR_ENABLEOCD!");
return;
}
+ xtensa_dm_deinit(&xtensa->dbg_mod);
}
xtensa_free_reg_cache(target);
free(xtensa->hw_brps);
.tap = NULL,
.queue_tdi_idle = NULL,
.queue_tdi_idle_arg = NULL,
+ .dap = NULL,
+ .debug_ap = NULL,
+ .debug_apsel = DP_APSEL_INVALID,
+ .ap_offset = 0,
};
- xtensa_chip_dm_cfg.tap = target->tap;
- LOG_DEBUG("JTAG: %s:%s pos %d", target->tap->chip, target->tap->tapname, target->tap->abs_chain_position);
+ struct adiv5_private_config *pc = target->private_config;
+ if (adiv5_verify_config(pc) == ERROR_OK) {
+ xtensa_chip_dm_cfg.dap = pc->dap;
+ xtensa_chip_dm_cfg.debug_apsel = pc->ap_num;
+ xtensa_chip_dm_cfg.ap_offset = target->dbgbase;
+ LOG_DEBUG("DAP: ap_num %" PRId64 " DAP %p\n", pc->ap_num, pc->dap);
+ } else {
+ xtensa_chip_dm_cfg.tap = target->tap;
+ LOG_DEBUG("JTAG: %s:%s pos %d", target->tap->chip, target->tap->tapname,
+ target->tap->abs_chain_position);
+ }
struct xtensa_chip_common *xtensa_chip = calloc(1, sizeof(struct xtensa_chip_common));
if (!xtensa_chip) {
static int xtensa_chip_examine(struct target *target)
{
- return xtensa_examine(target);
+ struct xtensa *xtensa = target_to_xtensa(target);
+ int retval = xtensa_dm_examine(&xtensa->dbg_mod);
+ if (retval == ERROR_OK)
+ retval = xtensa_examine(target);
+ return retval;
}
int xtensa_chip_jim_configure(struct target *target, struct jim_getopt_info *goi)
{
- target->has_dap = false;
- return JIM_CONTINUE;
+ static bool dap_configured;
+ int ret = adiv5_jim_configure(target, goi);
+ if (ret == JIM_OK) {
+ LOG_DEBUG("xtensa '-dap' target option found");
+ dap_configured = true;
+ }
+ if (!dap_configured) {
+ LOG_DEBUG("xtensa '-dap' target option not yet found, assuming JTAG...");
+ target->has_dap = false;
+ }
+ return ret;
}
/** Methods for generic example of Xtensa-based chip-level targets. */
#include <config.h>
#endif
+#include <helper/align.h>
#include "xtensa_debug_module.h"
#define TAPINS_PWRCTL 0x08
#define TAPINS_IDCODE_LEN 32
#define TAPINS_BYPASS_LEN 1
+/* Table of power register offsets for APB space */
+static const struct xtensa_dm_pwr_reg_offsets xdm_pwr_regs[XDMREG_PWRNUM] =
+ XTENSA_DM_PWR_REG_OFFSETS;
+
/* Table of debug register offsets for Nexus and APB space */
static const struct xtensa_dm_reg_offsets xdm_regs[XDMREG_NUM] =
XTENSA_DM_REG_OFFSETS;
{
if (!dm || !cfg)
return ERROR_FAIL;
+ if (!IS_ALIGNED(cfg->ap_offset, XTENSA_DM_APB_ALIGN)) {
+ LOG_ERROR("Xtensa DM APB offset must be aligned to a %dKB multiple",
+ XTENSA_DM_APB_ALIGN / 1024);
+ return ERROR_FAIL;
+ }
dm->pwr_ops = cfg->pwr_ops;
dm->dbg_ops = cfg->dbg_ops;
dm->tap = cfg->tap;
dm->queue_tdi_idle = cfg->queue_tdi_idle;
dm->queue_tdi_idle_arg = cfg->queue_tdi_idle_arg;
+ dm->dap = cfg->dap;
+ dm->debug_ap = cfg->debug_ap;
+ dm->debug_apsel = cfg->debug_apsel;
+ dm->ap_offset = cfg->ap_offset;
return ERROR_OK;
}
+void xtensa_dm_deinit(struct xtensa_debug_module *dm)
+{
+ if (dm->debug_ap) {
+ dap_put_ap(dm->debug_ap);
+ dm->debug_ap = NULL;
+ }
+}
+
+int xtensa_dm_poll(struct xtensa_debug_module *dm)
+{
+ /* Check if debug_ap is available to prevent segmentation fault.
+ * If the re-examination after an error does not find a MEM-AP
+ * (e.g. the target stopped communicating), debug_ap pointer
+ * can suddenly become NULL.
+ */
+ return (!dm || (dm->dap && !dm->debug_ap)) ? ERROR_FAIL : ERROR_OK;
+}
+
+int xtensa_dm_examine(struct xtensa_debug_module *dm)
+{
+ struct adiv5_dap *swjdp = dm->dap;
+ int retval = ERROR_OK;
+
+ if (swjdp) {
+ LOG_DEBUG("DM examine: DAP AP select %d", dm->debug_apsel);
+ if (dm->debug_ap) {
+ dap_put_ap(dm->debug_ap);
+ dm->debug_ap = NULL;
+ }
+ if (dm->debug_apsel == DP_APSEL_INVALID) {
+ LOG_DEBUG("DM examine: search for APB-type MEM-AP...");
+ /* TODO: Determine whether AP_TYPE_AXI_AP APs can be supported... */
+ retval = dap_find_get_ap(swjdp, AP_TYPE_APB_AP, &dm->debug_ap);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Could not find MEM-AP to control the core");
+ return retval;
+ }
+ } else {
+ dm->debug_ap = dap_get_ap(swjdp, dm->debug_apsel);
+ }
+
+ /* TODO: Allow a user-specified AP instead of relying on AP_TYPE_APB_AP */
+ dm->debug_apsel = dm->debug_ap->ap_num;
+ LOG_DEBUG("DM examine: Setting apsel to %d", dm->debug_apsel);
+
+ /* Leave (only) generic DAP stuff for debugport_init(); */
+ dm->debug_ap->memaccess_tck = 8;
+
+ retval = mem_ap_init(dm->debug_ap);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MEM-AP init failed: %d", retval);
+ return retval;
+ }
+
+ /* TODO: how to set autoincrement range? Hard-code it to 1024 bytes for now */
+ dm->debug_ap->tar_autoincr_block = (1 << 10);
+ }
+
+ return retval;
+}
+
int xtensa_dm_queue_enable(struct xtensa_debug_module *dm)
{
return dm->dbg_ops->queue_reg_write(dm, XDMREG_DCRSET, OCDDCR_ENABLEOCD);
LOG_ERROR("Invalid DBG reg ID %d!", reg);
return ERROR_FAIL;
}
+ if (dm->dap)
+ /* NOTE: Future optimization: mem_ap_read_u32() offers higher performance with
+ * queued reads, but requires an API change to pass value as a 32-bit pointer.
+ */
+ return mem_ap_read_buf(dm->debug_ap, value, 4, 1, xdm_regs[reg].apb + dm->ap_offset);
uint8_t regdata = (xdm_regs[reg].nar << 1) | 0;
uint8_t dummy[4] = { 0, 0, 0, 0 };
xtensa_dm_add_set_ir(dm, TAPINS_NARSEL);
LOG_ERROR("Invalid DBG reg ID %d!", reg);
return ERROR_FAIL;
}
+ if (dm->dap)
+ return mem_ap_write_u32(dm->debug_ap, xdm_regs[reg].apb + dm->ap_offset, value);
uint8_t regdata = (xdm_regs[reg].nar << 1) | 1;
uint8_t valdata[] = { value, value >> 8, value >> 16, value >> 24 };
xtensa_dm_add_set_ir(dm, TAPINS_NARSEL);
LOG_ERROR("Invalid PWR reg ID %d!", reg);
return ERROR_FAIL;
}
+ if (dm->dap) {
+ /* NOTE: Future optimization: mem_ap_read_u32() offers higher performance with
+ * queued reads, but requires an API change to pass value as a 32-bit pointer.
+ */
+ uint32_t apbreg = xdm_pwr_regs[reg].apb + dm->ap_offset;
+ int retval = mem_ap_read_buf(dm->debug_ap, data, 4, 1, apbreg);
+ if (retval == ERROR_OK)
+ retval = mem_ap_write_u32(dm->debug_ap, apbreg, clear);
+ return retval;
+ }
uint8_t value_clr = (uint8_t)clear;
uint8_t tap_insn = (reg == XDMREG_PWRCTL) ? TAPINS_PWRCTL : TAPINS_PWRSTAT;
int tap_insn_sz = (reg == XDMREG_PWRCTL) ? TAPINS_PWRCTL_LEN : TAPINS_PWRSTAT_LEN;
LOG_ERROR("Invalid PWR reg ID %d!", reg);
return ERROR_FAIL;
}
+ if (dm->dap) {
+ uint32_t apbreg = xdm_pwr_regs[reg].apb + dm->ap_offset;
+ return mem_ap_write_u32(dm->debug_ap, apbreg, data);
+ }
uint8_t tap_insn = (reg == XDMREG_PWRCTL) ? TAPINS_PWRCTL : TAPINS_PWRSTAT;
int tap_insn_sz = (reg == XDMREG_PWRCTL) ? TAPINS_PWRCTL_LEN : TAPINS_PWRSTAT_LEN;
uint8_t value = (uint8_t)data;
#define OPENOCD_TARGET_XTENSA_DEBUG_MODULE_H
#include <jtag/jtag.h>
+#include <target/arm_adi_v5.h>
#include <helper/bits.h>
#include <target/target.h>
Module to happen correctly. When it is set, any write to this bit clears it.
Either don't access it, or re-write it to 1 so JTAG accesses continue.
*/
-#define PWRCTL_JTAGDEBUGUSE BIT(7)
-#define PWRCTL_DEBUGRESET BIT(6)
-#define PWRCTL_CORERESET BIT(4)
-#define PWRCTL_DEBUGWAKEUP BIT(2)
-#define PWRCTL_MEMWAKEUP BIT(1)
-#define PWRCTL_COREWAKEUP BIT(0)
-
-#define PWRSTAT_DEBUGWASRESET BIT(6)
-#define PWRSTAT_COREWASRESET BIT(4)
-#define PWRSTAT_CORESTILLNEEDED BIT(3)
-#define PWRSTAT_DEBUGDOMAINON BIT(2)
-#define PWRSTAT_MEMDOMAINON BIT(1)
-#define PWRSTAT_COREDOMAINON BIT(0)
+#define PWRCTL_JTAGDEBUGUSE(x) (((x)->dbg_mod.dap) ? (0) : BIT(7))
+#define PWRCTL_DEBUGRESET(x) (((x)->dbg_mod.dap) ? BIT(28) : BIT(6))
+#define PWRCTL_CORERESET(x) (((x)->dbg_mod.dap) ? BIT(16) : BIT(4))
+#define PWRCTL_DEBUGWAKEUP(x) (((x)->dbg_mod.dap) ? BIT(12) : BIT(2))
+#define PWRCTL_MEMWAKEUP(x) (((x)->dbg_mod.dap) ? BIT(8) : BIT(1))
+#define PWRCTL_COREWAKEUP(x) (((x)->dbg_mod.dap) ? BIT(0) : BIT(0))
+
+#define PWRSTAT_DEBUGWASRESET_DM(d) (((d)->dap) ? BIT(28) : BIT(6))
+#define PWRSTAT_COREWASRESET_DM(d) (((d)->dap) ? BIT(16) : BIT(4))
+#define PWRSTAT_DEBUGWASRESET(x) (PWRSTAT_DEBUGWASRESET_DM(&((x)->dbg_mod)))
+#define PWRSTAT_COREWASRESET(x) (PWRSTAT_COREWASRESET_DM(&((x)->dbg_mod)))
+#define PWRSTAT_CORESTILLNEEDED(x) (((x)->dbg_mod.dap) ? BIT(4) : BIT(3))
+#define PWRSTAT_DEBUGDOMAINON(x) (((x)->dbg_mod.dap) ? BIT(12) : BIT(2))
+#define PWRSTAT_MEMDOMAINON(x) (((x)->dbg_mod.dap) ? BIT(8) : BIT(1))
+#define PWRSTAT_COREDOMAINON(x) (((x)->dbg_mod.dap) ? BIT(0) : BIT(0))
+
/* Virtual IDs for using with xtensa_debug_ops API */
enum xtensa_dm_reg {
/* TRAX Registers */
{ .nar = 0x7f, .apb = 0x3ffc }, /* XDMREG_COMPID3 */ \
}
-#define XTENSA_DM_APB_MASK (0x3fff)
+#define XTENSA_DM_APB_ALIGN 0x4000
/* OCD registers, bit definitions */
#define OCDDCR_ENABLEOCD BIT(0)
struct xtensa_debug_module_config {
const struct xtensa_power_ops *pwr_ops;
const struct xtensa_debug_ops *dbg_ops;
+
+ /* Either JTAG or DAP structures will be populated */
struct jtag_tap *tap;
void (*queue_tdi_idle)(struct target *target);
void *queue_tdi_idle_arg;
+
+ /* For targets conforming to ARM Debug Interface v5,
+ * "dap" references the Debug Access Port (DAP)
+ * used to make requests to the target;
+ * "debug_ap" is AP instance connected to processor
+ */
+ struct adiv5_dap *dap;
+ struct adiv5_ap *debug_ap;
+ int debug_apsel;
+ uint32_t ap_offset;
};
struct xtensa_debug_module {
const struct xtensa_power_ops *pwr_ops;
const struct xtensa_debug_ops *dbg_ops;
+
+ /* Either JTAG or DAP structures will be populated */
struct jtag_tap *tap;
void (*queue_tdi_idle)(struct target *target);
void *queue_tdi_idle_arg;
+ /* DAP struct; AP instance connected to processor */
+ struct adiv5_dap *dap;
+ struct adiv5_ap *debug_ap;
+ int debug_apsel;
+
struct xtensa_power_status power_status;
struct xtensa_core_status core_status;
xtensa_ocdid_t device_id;
+ uint32_t ap_offset;
};
int xtensa_dm_init(struct xtensa_debug_module *dm, const struct xtensa_debug_module_config *cfg);
+void xtensa_dm_deinit(struct xtensa_debug_module *dm);
+int xtensa_dm_poll(struct xtensa_debug_module *dm);
+int xtensa_dm_examine(struct xtensa_debug_module *dm);
int xtensa_dm_queue_enable(struct xtensa_debug_module *dm);
int xtensa_dm_queue_reg_read(struct xtensa_debug_module *dm, enum xtensa_dm_reg reg, uint8_t *value);
int xtensa_dm_queue_reg_write(struct xtensa_debug_module *dm, enum xtensa_dm_reg reg, uint32_t value);
static inline int xtensa_dm_queue_execute(struct xtensa_debug_module *dm)
{
- return jtag_execute_queue();
+ return dm->dap ? dap_run(dm->dap) : jtag_execute_queue();
}
static inline void xtensa_dm_queue_tdi_idle(struct xtensa_debug_module *dm)
static inline bool xtensa_dm_tap_was_reset(struct xtensa_debug_module *dm)
{
- return !(dm->power_status.prev_stat & PWRSTAT_DEBUGWASRESET) &&
- dm->power_status.stat & PWRSTAT_DEBUGWASRESET;
+ return !(dm->power_status.prev_stat & PWRSTAT_DEBUGWASRESET_DM(dm)) &&
+ dm->power_status.stat & PWRSTAT_DEBUGWASRESET_DM(dm);
}
static inline bool xtensa_dm_core_was_reset(struct xtensa_debug_module *dm)
{
- return !(dm->power_status.prev_stat & PWRSTAT_COREWASRESET) &&
- dm->power_status.stat & PWRSTAT_COREWASRESET;
+ return !(dm->power_status.prev_stat & PWRSTAT_COREWASRESET_DM(dm)) &&
+ dm->power_status.stat & PWRSTAT_COREWASRESET_DM(dm);
}
static inline bool xtensa_dm_core_is_stalled(struct xtensa_debug_module *dm)
projects / fw / openocd / commitdiff